BRACKET, EYE, NONROTA

BRACKET,EYE,NONROTA
BRACKET,EYE,NONROTATING SHAFT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment FULL AND OPEN COMPETITION APPLY
THE ITEM DESCRIBED IN THIS SOLICITATION IS DEFINED IN WHOLE OR IN PART BY ARMY DRAWING(S). THESE DRAWING(S) MAY CONTAIN A PAINT FINISHING REQUIREMENT. WHERE SUCH REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING 16236 CS-2300-0001 IN LIEU OF FINISH REQUIREMENTS OF THE ARMY DRAWING(S). THIS DRAWING CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT RESISTANT COATINGS (CARC), AND ADDITIONAL INFORMATION RELATING TO HIGH TEMPERATURE COATINGS.
CLASS 3 THREADS APPLY TO THIS NSN.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SPE7L1-26-T-18A1
SECTION B
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
(BRACKET, MOUNTING. ALUMINUM) USE MOST CURRENT REVISIONS OF ALL SPECIFICATIONS AND STANDARDS.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 10894002 REVISION NR K DTD 08/29/2019 PART PIECE NUMBER: 10894002
TDP Rev A Gen 1 IAW REFERENCE QAP 19207 10894002 REVISION NR E DTD 05/02/1967 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 16236 CS-2300-0001 REVISION NR B DTD 07/22/1991 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 10894002 REVISION NR DTD 11/02/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 10894002 REVISION NR DTD 01/21/2014 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-26-T-18A1
SECTION B
PR: 7018529760 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018529760 0001 EA 5.000
NSN/MATERIAL:3040004514429
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:P
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPI PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION AM10894002, EXCEPT AS GOVERNED BY CONTRACT C REQUIREMENTS;
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWG00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU TAIWAN 55243
TW
MARKFOR
BTWG00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU TAIWAN 55243
TW
M/F: (TCN) BTWG5342950017
RDD:
PROJ: TP 2
SUPP ADD: BA4BER SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
SPE7L1-26-T-18A1
SECTION B
PR: 7018529760 PRLI: 0001 CONT’D
DIC: A01 DIST: B03 ADV: 2L FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:11/04/2024
SPE7L1-26-T-18A1 NSN/Part Number: 3040-00-451-4429 Quantity: 5 EA Purchase Request: 7018529760QTY: 5 Delivery: 20 days ADO