Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET, FUELING PRO

Active
SPE4A7-26-T-631PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.

General Info

Procurement of 10 fueling bracket units, CMMC Level 2, ISO 9001, no mercury, ITAR/EAR controlled, delivery in 166 days, New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-631P Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
JESSICA GENTRY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,FUELING PRO
BRACKET, FUELING PROBE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE4A7-26-T-631P
SECTION B
export-controlled data. NSN/Part Number: 5342-00-443-5628 Quantity: 10 EA Purchase Request: 7017741074QTY: 10 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUNITI
Solicitation # SPE7L3-26-T-169C
The contract solicitation SPE7L3-26-T-169C requests 21 units of SUPPORT, CHUTE, AMMUNITION with NSN 1005-01-322-1212, to be delivered within 165 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to demilitarization controls as a Category I munitions item, and strict cybersecurity compliance is mandated through CMMC Level 2 certification. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests, while inspection and acceptance occur at the point of origin. The item must be marked with physical identification, though it is exempt from Unique Item Identification. Components are governed by Qualified Products or Manufacturers Lists, and any non-accepted supplies must have government identification removed. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, and only DLA-approved contractors with JCP certification, completed training, and authorized access may handle such data. The place of performance is New Cumberland, PA, 17070-5002, and all inquiries should be directed to Katelyn Young at the provided contact information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FEED TUBE
Solicitation # SPE4A6-26-T-14PV
The item specified is a bracket for a feed tube, identified by NSN 5342-01-128-1745, with a quantity of 32 units required under purchase request 7015852934. Delivery must be completed within 19 days after delivery order issuance. The solicitation, numbered SPE4A6-26-T-14PV, was posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the ASC Commodities Division under the Department of Defense, with performance occurring at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Emma Garrett, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048. Disclosure to foreign persons, including employees of U.S. companies or their overseas subsidiaries, is prohibited without prior authorization from the Department of State or Commerce. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required training on handling defense export-controlled data, and have been formally approved by DLA to access such data. Additional compliance with ISO 9001:2015 quality requirements and DLA packaging standards is mandatory for all manufacturers and non-manufacturers involved.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SHIELD ASSEMBLY, PRO
Solicitation # SPE7L1-26-T-945F
The contract is for the procurement of 19 units of a Shield Assembly, Pro, a critical gun part subject to stringent defense and export control regulations. The item is classified as a defense article under the International Traffic in Arms Regulations (ITAR), requiring all manufacturers and exporters to register with the Directorate of Defense Trade Controls and provide documentary proof of registration prior to award; failure to do so renders an offer ineligible. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The contract mandates that the actual manufacturer and phosphate coating contractor be identified and approved by the Contracting Officer, and any subsequent changes require formal modification. Product Verification Testing may be conducted on each shipment, requiring five samples from each contractor, with one sample potentially destroyed during testing. No Certificate of Conformance is permitted, and inspection will be performed by the DCMA Quality Assurance Representative at the manufacturer’s facility. All manufacturing processes, including phosphate coating, must comply with military specifications and require prior approval of procedures and workmanship specimens by the Post Award Contracting Officer. The contract prohibits the use of Class I ozone-depleting chemicals and imposes strict export controls on technical data under ITAR or EAR, restricting access to only those contractors with approved US/Canada Joint Certification Program status and completed DLA training. Components must originate from Qualified Products or Manufacturers Lists as defined in procurement note H02. Packaging must adhere to DLA standards, and demilitarization procedures apply per Category I munitions guidelines. The contract is a total small business set-aside under NAICS code 332994, with delivery due within 165 days after contract award, and technical data access is tightly controlled to prevent unauthorized disclosure to foreign persons, including U.S.-based subsidiaries.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
KNIFE, COMBAT
Solicitation # SPE7L3-26-T-168D
The contract specifies the procurement of 15 combat knives manufactured by Benchmade Knife Co. Inc. with part number 9070BK and NSN 1095-01-721-4255 at a unit price of $15.00, totaling $225.00, with delivery required within 10 days FOB origin. The knives must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to ASTM D3951 as supplemented by MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging standards. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, though Item Unique Identification is not required as per the service customer’s request. The goods are to be delivered to Hunter AAF in Georgia with no quantity variance allowed, and inspection and acceptance occur at the destination. Shipment must be sent via the fastest traceable means, explicitly excluding parcel post, and the contract mandates compliance with all government-specific freight, marking, and distribution codes including RDD 555 and project 9GF TP 3. The solicitation number is SPE7L3-26-T-168D, with a required delivery date of August 5, 2026, and the point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
MAGAZINE, CARTRIDGE
Solicitation # SPE7L4-26-T-6218
The contract is for the procurement of 10 magazines, cartridge, with NSN 1005-01-678-4950 under solicitation SPE7L4-26-T-6218, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 191 days after award, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Technical and quality requirements are governed by the DLA Master List, and the item is subject to stringent defense procurement standards including DLA packaging, measuring and test equipment compliance, and tailored higher-level contract quality requirements for both manufacturers and non-manufacturers. The item is classified as a Category I munitions item under DoDM 4160.28-Vol.3, requiring demilitarization upon disposal. Export control compliance is strictly enforced as the technical data associated with this item is subject to ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons anywhere, including within the U.S. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, and receive explicit approval from DLA to access such data. DFARS 252.225-7048 applies, and government identification must be removed from non-accepted supplies. The contract requires CMMC Level 2 certification for the third-party assessment organization handling cybersecurity matters, and all work is performance-based at New Cumberland, Pennsylvania, with Paula Chapman serving as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-635L
The contract pertains to the procurement of 52 units of a grooved coupling and clamp with NSN 5342-00-316-9240, sourced under solicitation SPE4A7-26-T-635L issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is subject to rigorous manufacturing requirements, potentially involving casting or forging processes that may require specialized tooling not held by the government, necessitating a Casting and Forging Assistance Request for sourcing support. Compliance with DLA packaging standards is mandatory, and the item is classified under the NAICS code 332994 for other fabricated metal product manufacturing. Delivery is due in 503 days after contract award, with responses required by August 17, 2026. The item is governed by stringent cybersecurity and export control protocols. The supplier must be certified as a CMMC Level 2 C3PAO and adhere to requirements for handling covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, prohibiting any transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce. Access to such data is restricted to U.S.-based contractors approved by DLA who hold valid JCP certification, have completed mandatory training on handling export-controlled technical data, and have passed DLA’s questionnaire review. All activities must comply with DFARS 252.225-7048, and performance is designated for Robins Air Force Base, Georgia, with Michael Johnson listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
PLATE, BUTT, SHOULDER
Solicitation # SPE7L4-26-T-6208
The contract specifies the procurement of four units of a PLATE, BUTT, SHOULDER item with NSN 1005-01-591-5976, supplied by MAGPUL INDUSTRIES CORP under solicitation SPE7L4-26-T-6208. Delivery is required within 20 days FOB origin to Fort Carson, Colorado, with no tolerance for quantity variance, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization must adhere to DLA packaging standards. The item is classified as a defense article subject to the International Traffic in Arms Regulations, requiring the manufacturer to be registered with the Directorate of Defense Trade Controls and to provide proof of registration. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and cybersecurity compliance requires a Level 2 self-assessment under the CMMC framework. Demilitarization procedures apply as this item falls under Category I munitions. Shipping must be performed via traceable means, prohibiting parcel post, and all documentation must remain tied to the contract line item. The item is part of a federal acquisition under a DoD agency, and the contract includes technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
WEAPON MOUNTING BRA
Solicitation # SPE7L4-26-T-6217
The contract pertains to the procurement of one Weapon Mounting BRA, identified by NSN 1005-01-696-2654 and part number EC0R-0108, with a requirement for delivery within 20 days to FOB destination under solicitation SPE7L4-26-T-6217. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129, with no special marking codes applied. Packaging must adhere to DLA’s packaging requirements, and shipment must avoid parcel post, instead utilizing the fastest traceable means. The delivery address is for USS THEODORE ROOSEVELT CVN 71, with a FPO AP 96632 location, and the shipment is designated under RDD 777, requiring vendor use of the VSM system. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The unit of issue is each (EA), with zero variance allowed on quantity, and inspection and acceptance occur at the final destination. The required delivery date is July 30, 2026, and the contract includes specific government-use only codes for tracking and logistics. The contracting office is the Department of Defense, specifically under the LSO Combat Vehicles and Armament, with Anna-Rachelle Betts listed as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
SLED
Supply of Universal Emergency Breathing Safety System (UEBSS) KitsThe contract pertains to the supply of Universal Emergency Breathing Safety System (UEBSS) kits designed to be compatible with Self-Contained Breathing Apparatus (SCBA) units. Each kit includes a manifold equipped with a Rectus socket and plug, check valves, and two low-pressure hoses measuring 40 inches and 20 inches in length, ensuring flexible and reliable emergency breathing connections in critical situations. The components are specified to ensure seamless integration with existing SCBA systems, enhancing safety and operational readiness for emergency responders. The solicitation is issued as a subcontract under the NAICS code 332994, which classifies it within the Other Miscellaneous Fabricated Metal Product Manufacturing category. The contract is managed by the Polk County Board of Commissioners in Georgia, with a response deadline of September 16, 2026, at 3:00 PM. While no specific place of performance or point of contact is provided, all bids must be submitted through the designated state procurement portal using the provided link before the deadline. The contract does not include any set-aside provisions, and there is no indication of demographic or small business preferences.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-635J
This contract pertains to the procurement of electrical insulation tape designated as a commercial item with a 12-month shelf life, extendable under RS055 requirements. The item is classified as a critical application product and must comply with Technical Data Package Revision B, Gen 3, in accordance with CID A-A-59474D Revision D dated 01/23/2024, with the part number AA59474 TY1 CL4 1W and NSN 5970010124280. All packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special shelf life labeling code 33, and prohibit any mercury or mercury compounds in preservation materials. Packaging must follow DLA’s RP001 requirements, with units delivered in 36-yard rolls, palletized appropriately, and marked for government use with DNO005 as the freight forwarder and DNOX00 as the delivery destination in Kjeller, Norway. The item is supplied in a unit of issue of RO (roll), with a total quantity of two rolls, and delivery is required FOB origin within five days of award, with zero variance permitted in quantity. Inspection and acceptance occur at origin, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications. The solicitation number is SPE4A7-26-T-635J, with a required delivery date of August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with James Sinks as the point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A7-26-T-630Z
The contract pertains to the procurement of one Installation Kit, Electronic Equipment with NSN 5895-01-677-7173 and part number 02-2856383-1, to be delivered in a single unit within ten days of contract award, with delivery terms set at FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, and must be strictly followed. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, while palletization adheres to RP001 specifications. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Inspection and acceptance occur at the destination, with the delivery point being US Army SSA Powidz AB, Poland, and the freight shipping address matching the delivery location. The contract is governed under solicitation SPE4A7-26-T-630Z, with a required delivery date of August 3, 2026, and the unit of issue is each, with no variance permitted in quantity. Compliance with DLA procedures for transportation, marking, and documentation is mandatory, and the contract includes specific government-use identification codes and contact information for procurement inquiries.
Other Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-634P
The contract pertains to the procurement of two aircraft access doors, identified by NSN 0001S00000052, under solicitation SPE4A7-26-T-634P, with a delivery requirement of 54 days after award. The design and configuration are governed by multiple referenced drawings including 68A325591, 68A325596, 68A325599, and 68A890281, each specifying particular part configurations and associated engineering notes. Several military and industry part standards have been superseded and replaced, including ST3M460 by NAS-1097, ST3M461 by NASM20470, and PS15534 by PS15500.4, mandating use of the newer standards in fabrication and assembly. Additional components like 6M39, PS23041, 29M100, PS16002, PS14018, 6M91, and 6M148 are specified as called out on specific drawings. Spare parts must be provided with hinges and latches attached and include a quarter-inch trim on all sides except the inboard side where the hinge mounts. Technical and quality requirements are incorporated via DLA’s Master List, and export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to unauthorized foreign persons or entities. Access to controlled data is limited to contractors approved under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire. This solicitation is set aside for Women-Owned Small Businesses, with oversight by the Department of Defense’s ASC Supplier Operations division, and the point of contact is April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details