BRACKET, MOUNTING
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract is for the procurement of a mounting bracket for a tension pulley under solicitation SPE7L1-26-T-845S, with a quantity of 13 units delivered FOB origin to DLA Distribution Red River in Texarkana, Texas, by a deadline of 222 days after award, with the need ship date set for March 7, 2027. The item is identified by NSN 5340-01-630-2719 and is subject to stringent technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The product must comply with hazardous material handling standards per FED-STD-313, requiring packaging according to TQ requirement IP025 if deemed hazardous, or commercial packaging under ASTM D3951 if not, though DLA requirements always dominate. Packaging and labeling must adhere strictly to MIL-STD-129 for marking and barcoding, and palletization must follow RP001. Sampling and inspection criteria mandate use of MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected in the sample lot unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The item incorporates components governed by Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML), requiring compliance with procurement note H02. A Certificate of Conformance per FAR 52.246-15 is mandatory, and the contract prohibits use of Class I ozone-depleting chemicals entirely, with any substitute chemicals requiring prior approval. Inspection and acceptance occur at destination, and all supplies must be delivered with no variance in quantity. The contract applies full and open competition and incorporates a comprehensive set of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, changes, subcontracting, and safeguarding of contractor information systems, along with deviations specific to the solicitation period. Payment is processed via Wide Area WorkFlow (WAWF), and offerors must submit proposals through the DIBBS portal by July 27, 2026, with technical data accessible via a designated DLA link. The contract requires full compliance with NIST SP 800-171 for CUI protection
General Info
Agency
NAICS
Place of Performance
10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
BRACKET, MOUNTING (TENSION PULLEY)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLIES.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
52.246-15 CERTIFICATE OF CONFORMANCE
QPL Specification(s) apply to this item.
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY.
SPE7L1-26-T-845S
SECTION B
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 12562897 REVISION NR DTD 03/15/2012 PART PIECE NUMBER: 12562897
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12562897 REVISION NR DTD 09/04/2014 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529293 0001 EA 13.000
NSN/MATERIAL:5340016302719
DELIVERY (IN DAYS):0222
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
SPE7L1-26-T-845S
SECTION B
PR: 7017529293 PRLI: 0001 CONT’D
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:03/07/2027 Original Required Delivery Date:10/14/2026
SPE7L1-26-T-845S NSN/Part Number: 5340-01-630-2719 Quantity: 13 EA Purchase Request: 7017529293QTY: 13 Delivery: 222 days ADO