Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET, MOUNTING

Active
SPE7M8-26-T-5712Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a mounting bracket identified by NSN 5340015718473 and part number 3238482-2, with a quantity of six units to be delivered within 150 days under a firm fixed-price arrangement of $6.00 per unit. Delivery is FOB origin with no tolerance for variance in quantity, and inspection and acceptance occur at destination. The item must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards, including ASTM D3951 for commercial packaging. Packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with hazardous material handling governed by Fed-Std-313 and TQ requirement IP025 if applicable. The contractor must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance through a self-assessment. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is June 23, 2026, with a need ship date of April 7, 2026. This solicitation, issued under SPE7M8-26-T-5712, falls under NAICS code 332722 and was posted on August 5, 2026, with a response deadline of August 17, 2026. Contract performance is governed by DLA procurement policies, and all relevant technical, quality, and cybersecurity obligations are binding and non-negotiable.

General Info

Six mounting brackets at $6 each, FOB origin, delivered to New Cumberland by June 23, 2026, with CMMC Level 2 and DLA compliance required.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M8-26-T-5712.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
RICKIE ALLEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,MOUNTING
BRACKET,MOUNTING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RAYTHEON COMPANY 96214 P/N 3238482-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014128947 0001 EA 6.000
NSN/MATERIAL:5340015718473
DELIVERY (IN DAYS):0150
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7M8-26-T-5712
SECTION B
PR: 7014128947 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/07/2026 Original Required Delivery Date:06/23/2026
SPE7M8-26-T-5712 NSN/Part Number: 5340-01-571-8473 Quantity: 6 EA Purchase Request: 7014128947QTY: 6 Delivery: 150 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-R-XB62
The contract specifies the procurement of 300 hexagon plain nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and zero variance in quantity. The item is classified as a critical safety item and a critical application item for Martin-Baker Aircraft Company Limited, with part number MBEU146543, requiring strict adherence to quality and configuration controls. All supplies must comply with MIL-STD-129 for marking, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, while packaging must follow MIL-STD-2073-1E and DLA’s packaging requirements. Inspection and acceptance occur at origin, and sampling must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required, assigning verification levels VII, IV, and II to critical, major, and minor attributes respectively. The contract incorporates technical and quality requirements from the DLA Master List referenced online, and non-tailored higher-level quality standards including SAE AS9100 apply. Waivers or deviations require explicit approval from the DSC contracting officer. Delivery is due 240 days after contract award, with FOB origin terms, and transportation details are governed by DLAD procedural notes. The item is subject to covered defense information regulations and the use of calibrated measuring and test equipment as specified under RT001.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-12TU
The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-12TP
The contract specifies the procurement of 65 socket head cap screws identified by NSN 5305-01-660-8339 and part number NAS1352-8-LN-28, manufactured to the current revision of the non-government standard NAS1352 Revision 13 dated 05/31/2016. All hardware must comply with this standard, and previously approved revisions are acceptable only for items manufactured before the solicitation date. The item is classified as a critical application component, requiring strict adherence to physical identification and bare item marking requirements under RQ017, and must be marked in accordance with MIL-STD-129 without special marking codes. Packaging must conform to MIL-STD-2073-1E, including preservation method 33, dry conditions, and use of BV unit containers, with palletization following DLA's packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking except for specific exemptions like batteries or instruments as defined by NAVSEA, and any such exempt items must include a secondary containment. Sampling for quality verification follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. The item is delivered FOB origin with a 109-day delivery window, inspection and acceptance occurring at destination, and no variance is permitted in quantity. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12TT
The contract specifies the procurement of a shear bolt, identified by NSN 5306013653161, with a quantity of 276 units, governed by strict technical, quality, and packaging standards. The item must comply with the NAS1303 through 1320 standard, Revision 13 dated 01/31/2001, and reference drawing 13873 EI-013653161, Revision dated 07/10/2026, with manufacturing required to adhere to the current revision of the governing standard as of the solicitation date. All hardware manufactured going forward must meet the latest version of the applicable part standard, and previous revisions are only acceptable if they were current at the time of production. Inspection requirements mandate dimensional conformance of all Class 3A and 3B threads according to SYSTEM 22 of FED-STD-H28/20, excluding small internal and external threads below specified diameters. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The item is designated as a critical application and requires compliance with DLA’s Master List of Technical and Quality Requirements, which override other standards. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 guidelines. Identification marking adheres to MIL-STD-130N, and while Item Unique Identification is not mandated, all other manufacturer and lot markings are required. Delivery is FOB origin, with inspection and acceptance occurring at the point of manufacture. The delivery timeframe is 240 days, with no variance permitted in quantity. A separate line item for First Article Testing is included with one unit designated, though the actual test quantity is defined in FAR clauses cited in Section A, and pricing for this item is required for evaluation. The contract references DLA procedural notes for transportation and provides the shipping destination as Tinker AFB, Oklahoma. The solicitation closes on August 13, 2026, with a performance need date of September 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, AS
Solicitation # SPE4A6-26-T-12UT
The contract specifies the procurement of 28 self-locking nuts with assembled washers, identified by NSN 5310-00-163-7561, under solicitation SPE4A6-26-T-12UT, with a response deadline of August 13, 2026, and a delivery requirement of 256 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date depending on acquisition size. The item is subject to strict export controls under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Quality conformance inspections, measuring equipment standards, and DLA packaging requirements are mandated, and government identification must be removed from rejected items. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and physical identification markings on the bare item are required. The point of contact for inquiries is Molitauoleava Langi, and performance is to occur in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12UY
This contract pertains to the procurement of PIN-RIVET components identified by NSN 5320016069638 and a separate first article test item identified by NSN 0001S00000052, both governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The hardware must conform to the current revision of applicable non-government standards, specifically NAS4450 Revision 4 and NAS4444 Revision 6, with past production to previous revisions still acceptable provided they were current at the time of manufacture. All items are classified as commercial items and must meet tailored quality requirements including inspection and acceptance at origin, mandatory physical identification and bare item marking, and removal of government identification from non-conforming supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as designated. A Certificate of Quality Compliance is required, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking in compliance with MIL-STD-129 and no special marking codes applied. The contract includes one line item for 260 units of the PIN-RIVET at a unit price of $260.00, with delivery required within 410 days FOB origin, and a second line item for one unit designated for first article testing, priced at $1.00 but not subject to separate payment unless the test requirement is fulfilled and not waived. Both items have zero quantity variance and are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the need ship date set for January 31, 2027 and the original required delivery date of December 26, 2026. The first article test item has no specified delivery date, reflecting its role as a testing requirement contingent on government evaluation. The procurement is subject to government oversight including potential first article testing under FAR clauses referenced, and compliance with all applicable DLA procedural notes for transportation and logistics. The contract emphasizes rigid adherence to documented standards and requires full alignment with DLA’s technical data package and quality assurance provisions.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-12TX
The contract specifies the procurement of 494 units of a hexagon head cap screw with NSN 5305-00-907-0044 under solicitation SPE4A6-26-T-12TX, with a delivery requirement of 170 days and FOB origin terms. All items must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, marking, and inspection protocols per MIL-STD-2073-1E and MIL-STD-129. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II. The screw must conform to NASM35307 Revision 2 and other referenced specifications, with no intentional addition of mercury or mercury-containing compounds in any component or contact material, except for certain exempted applications like batteries or sensors as defined by NAVSEA; portable devices containing mercury must include a secondary containment. Packaging and preservation must follow DLA requirements, prohibiting mercury in preservation materials, with palletization and unit packaging details outlined under RP001 and QUP 050. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 31, 2027, and the original delivery date set for July 16, 2027. The contract enforces a strict zero variance in quantity, with inspection and acceptance occurring at origin, and all documentation, labeling, and compliance obligations are mandatory for both manufacturers and non-manufacturers.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-12UH
The contract pertains to the procurement of 251 plain, slotted hexagon nuts identified by NSN 5310-01-216-3677 under solicitation SPE4A6-26-T-12UH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 164 days of award, with full technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and subject to the revision in effect on the solicitation issue date. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Inspection and acceptance may occur at origin, and quality conformance inspections are required. A Certificate of Conformance is authorized unless explicitly withheld by a Quality Assurance Letter of Instruction. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting unauthorized disclosure to foreign persons, regardless of location, and applies to all contractors, including foreign subsidiaries. Access is limited to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory training on handling export-controlled data and been formally approved by DLA. The data is further governed by DFARS 252.225-7048. Covered defense information applies, and the place of performance is specified as New Cumberland, PA, with ZIP code 17070-5002. The solicitation opened on August 5, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 332722. Primary point of contact is Krystle Bailey, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-12VB
The contract is for the procurement of 32 units of SCREW, CAP, SOCKET HEAD, identified by NSN 5305-01-330-6346, and is being procured under a fully competitive process in compliance with military and federal specifications. The purchase request number is 7017742042, and the delivery is scheduled 170 days after award. The solicitation, numbered SPE4A6-26-T-12VB, was posted on August 5, 2026, with a response deadline of August 13, 2026. The procurement falls under NAICS code 332722 and is managed by the ASC Commodity Division within the Department of Defense. The place of performance is in Tracy, California, with a ZIP code of 95304-5000. Primary point of contact for the solicitation is Nyjel Knowlin, reachable at nyjel.knowlin@dla.mil. The acquisition is conducted through the DIBBS platform, with the official solicitation page accessible via the provided UI link.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A7-26-T-617Y
The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, 1-8X14
Solicitation # SPE4A0-26-T-4171
The contract specifies the procurement of 4 units of BOLT, 1-8X14, with NSN 5306015037927, under solicitation SPE4A0-26-T-4171, issued by the Department of Defense through the Aviation Supply Chain ESOc Buys office. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance. The item must be packaged in compliance with MIL-STD-2073-1E, marked per MIL-STD-129, and palletized according to DLA packaging requirements. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise stated, and attributes are to be categorized with specified verification levels or AQLs. The manufacturer is identified as JLG Industries, Inc. with part number 8310480, and technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements. Shipping instructions mandate traceable freight methods, excluding parcel post, with delivery directed to the Distribution Management Office at Camp Lejeune, North Carolina, under a specific military freight code and project designation. The original required delivery date is July 31, 2026, and the contract includes specific government-use only metadata and point of contact information.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-5708
The contract pertains to the procurement of a SWITCH, FLOW with NSN 5930-01-318-2893, quantity one unit, under purchase request 7017744547. The delivery must be completed within 10 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the acquisition type and solicitation timeline—revisions in effect on the solicitation issue date or award date control for simplified acquisitions, while the RFP issue date governs larger acquisitions unless an amendment updates the requirements. The alternate offeror is obligated to submit a complete data package covering both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5708, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 335314, and the contracting agency is the Electrical Devices Division within the Department of Defense. Performance is required at Fort Riley, Kansas, with Dondiego Boler listed as the primary point of contact, reachable via phone and email. No government identification may be removed from non-accepted supplies per regulatory requirements.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-5711
The contract pertains to the procurement of a SWITCH, FLOW item identified by NSN 5930-01-422-0537 and part number 45026, with a quantity of nine units to be delivered FOB origin within 174 days from the contract award. All supplies must comply with DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging methods, container types, cushioning materials, and marking standards aligned with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA—such exceptions must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Packaging and shipping must adhere to DLA’s hazardous materials guidelines, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The unit price is $9.00 per unit, and no quantity variance is permitted. The item must be delivered no later than February 20, 2027, with an initial need date of February 8, 2027. The solicitation was issued under SPE7M8-26-T-5711, with responses due by August 17, 2026, and the contract falls under NAICS code 335314. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision defined by the solicitation or award date depending on acquisition size.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5707
The contract is for the procurement of a single push switch with NSN 5930011164469 and part number PTM33E from SENASYS, INC, under solicitation SPE7M8-26-T-5707. Delivery is required within 20 days FOB destination with no quantity variance allowed, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-DTL-28786 for switches, with packaging and marking strictly following MIL-STD-129 and no special marking required. Mercury or mercury-containing compounds are prohibited unless part of functional components like batteries, fluorescent lamps, sensors, or weapons systems as specified by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The shipment must be sent via traceable means to the vessel USS CARTER HALL LSD 50 at FPO AE 09573 using RDD 777 and the transport control number V218806210EE15; parcel post is strictly forbidden. The required delivery date is August 3, 2026, and the contract is subject to the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The solicitation closes on August 17, 2026, and is managed by the Department of Defense’s Electrical Devices Division.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5713
The contract pertains to the procurement of a push switch with NSN 5930-01-374-9341, quantity of one unit, under solicitation SPE7M8-26-T-5713, with a required delivery date of August 3, 2026, and a 20-day delivery window. The item must be packaged and preserved in strict accordance with MIL-DTL-28786 for switches and packaged for shipment under MIL-STD-2073-1E, with marking compliant with MIL-STD-129 and no special marking required. All supplies must adhere to prohibitions on class I ozone-depleting substances unless written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are strictly banned from direct contact with the hardware except in specific exempted applications such as batteries, fluorescent lights, sensors, or naval-specified chemical reagents. Portable devices containing mercury must include a secondary containment boundary. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with specified verification levels or AQLs. Delivery is FOB destination with zero quantity variance permitted, inspection and acceptance occurring at the destination. The item must be shipped via traceable freight using the VSM system with RDD 777, avoiding parcel post entirely, and routed to USS CARTER HALL LSD 50, FPO AE 09573. The technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements applicable as of the solicitation issue date, and compliance is non-negotiable.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-5710
The contract is for the procurement of three pressure switches with NSN 5930-00-192-4507, issued under solicitation number SPE7M8-26-T-5710 by the Electrical Devices Division of the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and requires delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is Fort Eustis, Virginia, with a ZIP code of 23604-5577, and the primary point of contact is Dondiego Boler, reachable via email and phone listed in the contract data. No specific government identification removal requirements are specified, but compliance with DLA packaging and technical standards is mandatory.
Nonferrous Forging

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7M8-26-T-5709
The contract pertains to the procurement of a single machine screw identified by NSN 5305-01-507-7486, with a required delivery within 10 days after award. The solicitation, issued under number SPE7M8-26-T-5709, was posted on August 5, 2026, and responses are due by August 17, 2026. The item falls under NAICS code 332722 and is being procured by the Department of Defense through its Electrical Devices Division. Compliance with DLA packaging requirements is mandated, and the technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The place of performance is Camp Lejeune, North Carolina, with a zip code of 28547, and the primary point of contact is Dondiego Boler, reachable via email and phone provided. The solicitation does not specify a set-aside type, and the offeror must submit a complete data package including information for both the approved and alternate parts, particularly regarding the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
Toggle Switch Component SupplyThe contract requires the supply of a specific toggle switch identified by NSN 5930016919749 and part number 6FH 004 570-131, manufactured by HELLA INC DBA 1CW22, with strict adherence to DLA technical and quality standards. This is a subcontract under the Department of Defense's Electrical Devices Division, targeting a single item critical to military equipment functionality. The part must meet all designated specifications to ensure reliability and compatibility across defense systems. The opportunity was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as Camp Lejeune with zip code 28542-0125. The NAICS code 335313 classifies this under Electrical Equipment and Appliance Manufacturing, indicating the industrial category for the supplier's operations. The solicitation is accessible through the DIBBS platform, and while no point of contact or set-aside details are provided, compliance with DLA requirements is mandatory for eligibility and award consideration.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and FOB Origin Shipment ServicesThe contract covers the domestic transportation of completed hose assemblies from the manufacturer to DLA Distribution in New Cumberland, Pennsylvania, under FOB ORIGIN terms, meaning the buyer assumes all responsibility and cost for freight once the goods leave the origin point. This is a subcontract under a Total Small Business Set-Aside, designated for SBA-qualified small businesses, and is classified under NAICS code 484220 for truck transportation of freight. The solicitation was posted on August 4, 2026, with responses due by August 13, 2026, and is managed by the Electrical Devices Division within the Department of Defense. The place of performance is clearly defined as New Cumberland, PA, with a zip code of 17070-5002, and the contract is accessible through the DIBBS platform for registered participants.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) and Quality DocumentationThe contract titled Product Verification Testing (PVT) and Quality Documentation requires the contractor to conduct or coordinate the submission of product samples for government testing, ensuring all samples meet specified technical and quality standards before shipment. It mandates the maintenance of comprehensive quality records to document compliance with testing protocols and to provide auditable evidence of conformity. Approval of all test results must be secured from the relevant government authority prior to any product shipment, emphasizing strict adherence to regulatory and procedural requirements. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under a Total Small Business Set-Aside, limiting eligibility exclusively to small businesses as defined by the SBA. The North American Industry Classification System code 541380 indicates the work falls under other scientific and technical consulting services, and the contracting activity is managed by the Electrical Devices Division of the Department of Defense. Responses are due by August 13, 2026, with the solicitation posted on August 4, 2026, through the DIBBS platform.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Palletization ServicesThe contract requires the provision of packaging, labeling, and palletization services for hose assemblies in full compliance with Defense Logistics Agency and military standards, ensuring all products are prepared for secure and efficient shipment. This includes the generation and submission of all required documentation to meet federal and defense logistics requirements, with strict adherence to specifications governing marking, containment, and unitization. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a Small Business Set-Aside under the NAICS code 493190, reserved exclusively for small businesses as defined by the SBA. The solicitation is open for responses until August 13, 2026, and is issued by the Electrical Devices Division of the Department of Defense.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
Manufacture of Non-Metallic Hose Assembly (NSN 4720-01-649-7970)The contract calls for the full production of seven non-metallic hose assemblies meeting military specifications, encompassing all phases from material sourcing and fabrication to testing and quality assurance, with the final product identified by NSN 4720-01-649-7970. All work must be performed in accordance with strict defense standards and delivered to the specified performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the NAICS code 326220 classifies this as rubber product manufacturing. The opportunity was posted on August 4, 2026, with responses due by August 13, 2026, and the procuring activity is the Electrical Devices Division under the Department of Defense.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
Rotary Switch Component SupplyThe contract is for the supply of a single rotary switch with the National Stock Number 5930-01-236-0272, which must fully comply with Defense Logistics Agency technical and quality standards. The supplier is required to provide a complete data package alongside proper hazardous materials labeling to ensure regulatory and operational compliance. Delivery of the component must be completed within 20 days of order placement to meet urgent operational needs. The contract falls under the NAICS code 334419 and is classified as a subcontract, issued by the Electrical Devices Division of the Department of Defense. Performance is mandated at Holloman Air Force Base with the zip code 88330-7706. Interested parties must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 4, 2026, through the DIBBS platform.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details