Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET, MOUNTING

Active
SPE7L1-26-Q-1450Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two mounting brackets identified by NSN 5340-00-602-4977 under solicitation SPE7L1-26-Q-1450, with a delivery requirement of 132 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, configuration change management, and export control regulations are strictly enforced, including adherence to DFARS 252.225-7048 due to the presence of export-controlled technical data subject to ITAR or EAR. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA training on handling export-controlled data, and specific authorization from the DLA. The item is procured under full and open competition with no set aside, and the place of performance is designated as New Cumberland, Pennsylvania. All responses must be submitted by August 19, 2026, and the primary point of contact is Jarod More of the Department of Defense’s Land Supply Chain, reachable via email and phone provided.

General Info

Procure two NSN 5340-00-602-4977 brackets, delivery in 132 days, export-controlled, DLA training required, New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-Q-1450.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
JAROD MORE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET, MOUNTING
( BRACKET ASSEMBLY)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-00-602-4977 Quantity: 2 EA Purchase Request: 7017696946QTY: 2 Delivery: 132 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
CONTAINER, FREIGHT, G
Solicitation # SPE8ED-26-Q-0616
The U.S. Government, through DLA Troop Support under the Department of Defense, has issued a pre-solicitation notice for the procurement of 100 ISO shipping containers measuring 20 feet by 8 feet by 8 feet 6 inches, identified by National Stock Number 8150-01-463-8553. These containers are intended for delivery within the continental United States, with the requirement to be formally solicited in the near future under solicitation number SPE8ED26Q0616. While this notice is not a request for quotes or proposals, it signals the government’s intent to open a competitive procurement process, and all responsible sources are encouraged to prepare and submit bids when the formal solicitation is published on DIBBS. The North American Industry Classification System code for this requirement is 332439, and the solicitation will be managed from the agency’s office in Philadelphia, Pennsylvania. The official response deadline for any future submissions is set for July 27, 2026, at 7:00 p.m. Eastern Time, with the pre-solicitation notice posted on July 21, 2026. Avril Dickerson is listed as the primary point of contact, with her email address provided for inquiries. The procurement is not subject to any specific set-aside, meaning it is open to all eligible contractors without restriction based on small business or other classifications. Interested parties should monitor the SAM.gov portal for the upcoming solicitation to ensure timely submission of proposals in accordance with FAR 5.207(c)(16), which allows any responsible source to respond to government requirements upon formal solicitation.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332439
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE8ED-26-T-1211
The contract pertains to the procurement of a collapsible JMIC 3.0K item with part number 7517221-2 in TAN color, governed by technical and quality requirements from the DLA Master List, with compliance enforced through MIL-STD-130N for identification marking and ASTM D3951 for packaging unless superseded by higher-priority DLA standards. Packaging must conform to MIL-STD-129 and RP001 guidelines, with strict prohibitions against asbestos and intentional use of mercury or mercury compounds, except in specific functional applications like batteries or calibrated instruments, which must include secondary containment per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. First Article Testing is mandatory and separately contracted, with one unit designated for testing under CLIN 0002, while production lot testing is required for one unit under CLIN 0003. The item must be delivered FOB origin within 220 days, with no variance allowed in quantity, and inspection and acceptance occur at origin. Shipping must be via traceable freight, not parcel post, to the designated military address in Red Bank, NJ, with a required delivery date of July 31, 2026. All documentation references are tied to specific revision-controlled drawings and quality assurance provisions, and the contract includes covered defense information protocols under RD003.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1216
The contract pertains to a Modification Kit, SH, identified by part number 55296B and NSN 8145015121012, with a single unit required to be delivered within 20 days from the contract date. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All technical and quality requirements referenced by R or I numbers must comply with the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization following RP001 specifications. The item must be shipped via traceable means, excluding parcel post, and delivered to Fort Hood, Texas, with marking and labeling strictly controlled. The supplier, SharkCage Inc. of Spring Branch, TX, is subject to documentation requirements for source approval and must remove government identification from non-accepted supplies. The contract is issued under solicitation SPE8ED-26-T-1216, with a required delivery date of July 30, 2026, and is governed by federal acquisition protocols under the Department of Defense.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1215
The contract outlines the procurement of a single unit of a Modification Kit, SH, identified by NSN 8145015121011 and part number 55295B, supplied by SHARKCAGE INC located in Spring Branch, TX. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must adhere strictly to ASTM D3951 and MIL-STD-129, with palletization compliant with DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any general standards. The item must be shipped by traceable means, excluding parcel post, to the specified delivery address at Fort Hood, TX, and must be marked with the designated government identifier, W4546G62080263, and project code TP 3. The solicitation number is SPE8ED-26-T-1215, with a response deadline of August 17, 2026, and the required delivery date is July 30, 2026. All documentation, including source approval, must follow RC001 guidelines, and the contractor must ensure removal of any government identification from non-accepted supplies per RQ011. Covered Defense Information may apply, and the unit of issue is each, with the purchase request number 7017722200.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AN
Solicitation # SPE8ED-26-T-1218
This contract pertains to the procurement of one unit of material identified by NSN 8145017350446 and part number 20943-002 under solicitation SPE8ED-26-T-1218, issued by the Department of Defense through the Defense Logistics Agency. The requirement is for delivery within 20 days to a destination address in APO, AP 96278-2069, with FOB destination terms, meaning the supplier bears all costs and risks until delivery is completed. Inspection and acceptance occur at the destination, with no variance allowed in quantity—the exact one-unit requirement must be met. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, and marking must adhere to MIL-STD-129 without special codes. Palletization follows DLA’s packaging standards, and transportation details reference specific DLA procedural notes for both first destination and freight shipping, with an alternate shipping address in Pyeongtaek, South Korea. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, applicable based on the solicitation issuance date. Documentation requirements for source approval are mandatory, and the item is subject to Covered Defense Information protocols. The seller must provide all required supporting documentation, including source approval and compliance attestations, and is expected to meet the original required delivery date of July 31, 2026. The point of contact for the contract is Ogden Howard, with details for inquiries provided. The item falls under NAICS code 332439 for construction and equipment containers, and while no set-aside designation is specified, the procurement adheres to full DLA procedures including unit of issue alignment with ANSI X12 standards as referenced in official DLA documentation.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AN
Solicitation # SPE8ED-26-T-1213
SharkCage Inc. is contracted to supply four units of cradle kit with part number 150475 and NSN 8145-01-512-1025 under solicitation SPE8ED-26-T-1213, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within 20 days of contract award, FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the delivery destination, and packaging must meet MIL-STD-2073-1E standards with specified preservation methods and marking in compliance with MIL-STD-129, including no special marking codes. The items are to be delivered to APO AP 96278-2069, with the primary shipping address located at Osan AB in South Korea. The contract incorporates technical and quality requirements from the DLA Master List, including provisions for removal of government identification from non-accepted supplies, documentation for source approval requests, and potential application of covered defense information protocols. The required delivery date is July 31, 2026, with a procurement request number of 7017726930 and project code TP 3. All unit of issue conversions must reference the official DoD ANSI X12 guidelines, and transportation directives follow DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1214
The contract is for a Modification Kit, SH, with part number 55241B and NSN 814501-512-0903, requiring delivery of two units within twenty days from the award date, FOB origin. The supplier, SHARKCAGE INC located in Spring Branch, TX, must comply with all DLA packaging requirements as outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is EA, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The items must be shipped via traceable means, excluding parcel post, to the specified military delivery point at Fort Hood, TX. All packaging, palletization, and documentation must follow DLA standards, and government identification must be removed from non-accepted supplies per RQ011. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The delivery is tracked under contract SPE8ED-26-T-1214, with a required delivery date of July 30, 2026, and a unique transport control number W4546G62080270. The contract is subject to potential handling of covered defense information under RD003, and documentation related to source approval requests must be submitted as required by RC001.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
COVER, SHIPPING AND STO
Solicitation # SPE4A7-26-T-613Z
The contract pertains to the supply of a shipping and storage container designated by NSN 8140-01-495-5027, with a quantity of 64 units, under solicitation SPE4A7-26-T-613Z. Delivery is required within 171 days after award, and the contract includes strict compliance with Defense Logistics Agency packaging standards, technical and quality requirements referenced from the DLA Master List, and specific inspection and acceptance protocols. Sampling must adhere to MIL-STD-1916 or comparable zero-based plans, with attributes classified under defined verification levels or AQLs, and acceptance criteria mandate zero non-conformances unless otherwise stipulated. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons or entities, regardless of location, with DFARS 252.225-7048 governing compliance. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and explicit authorization may access the controlled technical data. Configuration changes require formal engineering change proposals, and cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization. Inspection and acceptance must occur at the manufacturer’s origin, and all non-accepted supplies must have government identification removed prior to return. The physical identification of the bare item must be marked per RQ017, and the contract mandates strict adherence to configuration management and change control procedures. The point of contact for inquiries is Jessica Gentry of the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332439 for other fabricated metal product manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SH
Solicitation # SPE8ED-26-T-1210
The contract pertains to the procurement of one unit of a Modification Kit, SH, identified by NSN 8145-01-512-0983 and part number 55262, supplied by SHARKCAGE INC. The item is classified as a commercial item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001: DLA Packaging Requirements for Procurement. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination point located at Fort Hood, Texas. The item must be shipped by traceable means, excluding parcel post, and is to be delivered to the specified government facility. The contract is issued under solicitation SPE8ED-26-T-1210, with an original required delivery date of July 31, 2026. Government-specific identifiers including contract data, shipping codes, and administrative codes are provided for internal use, and the point of contact for inquiries is Ogden Howard of the Department of Defense.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1212
The contract pertains to the procurement of one unit of item P/N IM2600-X0000, identified by NSN 8145016413213, sourced from Hardigg Industries, LLC and Pelican Products, Inc., with delivery required FOB origin within ten days of contract award. All packaging must comply with ASTM D3951, but is subject to precedence by the DLA Master List of Technical and Quality Requirements, with specific markings and labeling mandated by MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is a single EA with no tolerance for variance in quantity. The item is destined for US Army SSA Powidz AB in Poland, with shipping instructions referencing DLAD Proc Notes C19 and C20, and the delivery is marked for W9005D with associated tracking and project identifiers. The contract prohibits removal of government identification from non-accepted supplies and requires full compliance with documentation standards for source approval requests, while also acknowledging potential applicability of Covered Defense Information protocols. The required delivery date is July 31, 2026, and the solicitation number is SPE8ED-26-T-1212, issued under a federal acquisition framework with the NAICS code 332439.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
Federal
Flameless Ration Heater Tray AssemblyThe contract entails the manufacture and assembly of flameless ration heater trays designed for use with the Unitized Group Ration Express system. Each heater tray includes a coated fiber-based heating element, an activation fluid unit, and a seal-in-tray heater, all integrated to safely and reliably generate heat without an open flame for field meal preparation. The work requires precise engineering and quality control to ensure consistent performance under operational conditions, with all components meeting military specifications for durability, safety, and environmental resilience. The procurement is classified as a subcontract under NAICS code 332439, managed by DLA Troop Support under the Department of Defense, with performance based in Philadelphia, Pennsylvania, 19111. Proposals must be submitted by September 7, 2026, and the opportunity was posted on August 4, 2026. There is no specified set-aside status, and the contract is open to eligible subcontractors capable of fulfilling the technical and production requirements for military-grade heating systems.
DLA Troop Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC31
The contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.
Pa DLA Aviation At Philadelphia

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-T-915W
The contract specifies the procurement of 20 units of STRAP, WEBBING with NSN 5340-01-357-0800 under solicitation SPE7L1-26-T-915W, with a required delivery date of October 1, 2026, and a 44-day lead time. All items must be delivered FOB origin with no variance in quantity allowed and are subject to final inspection and acceptance at the destination. Packaging must comply with DLA’s master requirements, prioritizing MIL-STD-129 for marking and labeling, and adherence to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. Palletization must follow RP001 packaging guidelines, and all goods must be marked in accordance with MIL-STD-130N, though proprietary or insufficient identification is prohibited. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality criteria are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and revision control depends on solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation requirements are governed by DLAD procedural notes C19 and C20.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L1-26-T-915S
This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916A
This contract specifies the procurement of a helical compression spring identified by NSN 5360-01-026-1107 and part number TDP Rev A Gen 1 IAW MIL-STD-1330E, with a requirement for 17 units to be delivered within 154 days. The spring is designated as a critical application item requiring government engineering source approval and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific packaging, cleaning, and marking protocols. It mandates oxygen cleaning and packaging in accordance with MIL-STD-2073-1E and MIL-STD-129, with each unit container labeled with an O2 cleaning certificate and marked with “SPECIAL CLEAN O2-N2.” The item is subject to a zero variance in quantity and is to be delivered FOB origin to Industries of the Blind Inc in Greensboro, NC, with inspection and acceptance occurring at destination. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for limited functional applications authorized by NAVSEA, such as in batteries or sensors, with additional containment requirements for portable items. It enforces configuration change management through Engineering Change Proposals and requires suppliers to comply with Qualified Products Lists or Qualified Manufacturers Lists where applicable. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information protocols are also binding. The item is classified as a restricted source, and the supplier must adhere to the DLA Packaging Requirements and Transportation Procedures noted in DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-916A, with a response deadline of August 17, 2026, and a required shipment date of January 19, 2027, under a fixed unit price of $17.00 per unit.
Spring Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details