This Solicitation opportunity from Department Of Defense was posted on August 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BRACKET, MULTIPLE AN
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation SPE4A0-26-T-4067 seeks the procurement of two units of a BRACKET, MULTIPLE AN, with NSN 5340016565502 and part number A49001-98, under a fixed-price supply contract. Delivery is required within five days after award, with FOB Origin terms meaning title transfers at the contractor’s facility, and all items must be delivered to Joint Base Lewis McChord, WA. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, requiring zero non-conformances unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively, while unspecified attributes default to major. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, with hazardous items packaged per FED-STD-313 and TQ requirement IP025, and non-hazardous items per ASTM D3951. Palletization must follow RP001 DLA Packaging Requirements for Procurement, and bare items must be marked per RQ017. Shipment must use traceable freight methods and cannot use parcel post, with the designated delivery point and mark for address at W68PPA, Building 9640, Joint Base Lewis McChord. The contract includes numerous FAR and DFARS clauses regarding contract type, equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, authorization and consent, accelerated payments to small businesses, safeguarding contractor information systems, changes, default, subcontracting, inspection, and compliance with regulations on covered defense telecommunications equipment. The contractor is required to use WAWF for invoicing and receiving reports. No unit price or total contract value is provided, and the solicitation does not specify evaluation factors, key personnel, security clearances, or option quantities. All proposals must be submitted electronically via DIBBS by the stated deadline, and offerors must comply with representations regarding small business status, unique entity ID, CAGE code, and the use of covered
General Info
Agency
NAICS
Place of Performance
BLDG 9640 S L STREET BAY F, JOINT BASE LEWIS MCCH, WA, 98433-5000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
BRACKET,MULTIPLE AN
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N A49001-98
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-26-T-4067
SECTION B
PR: 7017552661 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017552661 0001 EA 2.000
NSN/MATERIAL:5340016565502
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
SPE4A0-26-T-4067
SECTION B
PR: 7017552661 PRLI: 0001 CONT’D
M/F: (TCN) W68PPA61950275
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/20/2026
SPE4A0-26-T-4067 NSN/Part Number: 5340-01-656-5502 Quantity: 2 EA Purchase Request: 7017552661QTY: 2 Delivery: 5 days ADO
More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS