Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Braddock Steel

Active

W911WN26QA057Federal

Response Deadline08/14/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract opportunity titled Braddock Steel under solicitation number W911WN26QA057 is a Small Business Set Aside, total, targeting vendors classified as small businesses under NAICS code 332323. Interested parties are required to complete the designated form and review Attachment 2 for materials specifications and Attachment 3 for associated drawings to fully understand the requirements. All questions must be submitted via email to the Contract Specialist, Isaiah Johnson, at isaiah.m.johnson@usace.army.mil, and responses will be provided exclusively through formal solicitation amendments. The solicitation was posted on July 31, 2026, with a firm response deadline of August 14, 2026, at 2:00 PM Eastern Time. The contracting office is the W072 Endist Pittsburgh, under the Department of Defense, located at 15222-4198 in Pittsburgh, Pennsylvania, and the place of performance details are currently unspecified. Further information and access to the solicitation can be found through the provided SAM.gov link.

General Info

Small business set aside for Braddock Steel under W911WN26QA057, deadline August 14, 2026, Pittsburgh, PA.

Agency

Department Of Defense → W072 Endist PittsburghView Agency

NAICS

332323 - Ornamental and Architectural Metal Work ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 31

Combined Synopsis

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 02:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W072 Endist Pittsburgh

Contacts1 person available

OfficePITTSBURGH, PA, 15222-4198, USA

Organization / Agency

Department Of Defense → W072 Endist Pittsburgh

View Agency Profile

Office AddressPITTSBURGH, PA, 15222-4198, USA

Contacts

ISAIAH JOHNSON

contact@example.gov

Full Description

Show more

Interest vendors are asked to please fill out the form titled W911WN26QA057. Please see Attachment 2 - Materials, and Attachment 3 - Drawings for further details regarding specifications. For any questions, please email the Contract Specialist, Isaiah Johnson, isaiah.m.johnson@usace.army.mil. All questions will be answered in the form of a solicitation amendment.

Similar Contracts

Same NAICS industry code

Antenna Tripod Manufacturing and AssemblyThe contract calls for the fabrication and assembly of a tripod support structure designed for antenna systems, adhering strictly to military specifications and technical requirements established by the Defense Logistics Agency. The work must meet rigorous performance, durability, and safety standards expected for defense-related equipment, with all components manufactured and integrated in compliance with applicable defense industry protocols. The structure is intended for reliable deployment in operational environments, requiring precision engineering and quality control throughout the production process. The solicitation is classified as a subcontract and is open for responses until August 10, 2026, with the performance location specified as Tracy, California, zip code 95304-5000. The North American Industry Classification System code 332323 identifies the scope within metal fabrication for structural and fabricated metal products. The contracting activity falls under the ACTIVE DEVICES DIVISION of the Department of Defense, and all offerors must demonstrate capability to fulfill the technical and logistical demands of this defense-focused procurement. Submission must be made through the designated DIBBS portal by the stated deadline.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Safety and Access Component ManufacturingThe contract seeks the fabrication of safety-critical components for specialized applications, including emergency exit doors, neck and side access points, latching systems, and an adjustable head gate that must be capable of lowering to a minimum height of four inches. These components are engineered to meet stringent safety and operational standards, likely for use in agricultural or research facilities where controlled access and rapid egress are essential. The work requires precision manufacturing and adherence to technical specifications that ensure functionality, durability, and compliance with industry safety requirements. The opportunity is posted as a subcontract under NAICS code 332323, indicating a focus on metal manufacturing for structural and industrial components. The response deadline is August 7, 2026, with a performance location in Pullman, Washington, zip code 99164. The contracting agency is the USDA ARS AFM APD, part of the Department of Agriculture, suggesting the end-use is related to agricultural research or facility operations. While no set-aside type or point of contact is specified, potential bidders should ensure full alignment with the technical and performance expectations outlined in the solicitation before submitting proposals by the deadline.

USDA Ars Afm Apd

POSTED

DEADLINE

Floor-Mounting Fire Extinguisher Bracket SupplyThe contract encompasses the supply of fifteen floor-mounting brackets designed for the standalone installation of Cleanguard+ CA13 fire extinguishers, specifically intended for deployment at the Groton location with a ZIP code of 06340. This subcontract is classified as a Small Business Set Aside under the SBA program, indicating that only qualified small businesses are eligible to bid, and it falls under the NAICS code 332323, which corresponds to boiler and tank manufacturing. The opportunity was posted on July 30, 2026, with a firm deadline for responses at 2:00 PM on August 5, 2026, and is procured by the Naval Supply Systems Command Fleet Logistics Center Norfolk under the Department of Defense. The brackets must be compatible with the Cleanguard+ CA13 extinguisher model to ensure proper mounting, stability, and accessibility in accordance with safety and operational requirements. The place of performance is designated as Groton, where the extinguishers will be installed, and all deliverables must meet the technical specifications and quality standards expected by the Department of Defense. Bidders are expected to provide all necessary hardware, documentation, and compliance assurances without additional sourcing or subcontracting unless explicitly permitted, and the contract award will prioritize small business capability, pricing, and delivery timelines to support immediate deployment needs.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Steel Cattle Guard Grille FabricationThe contract calls for the fabrication of 28 welded steel cattle guard grilles in accordance with USDA Forest Service Drawing 619-05, utilizing high-strength low-alloy steel with precise rail spacing and end channel specifications to meet structural and safety standards. The work is designated as a Small Business Set Aside under the NAICS code 332323, indicating it is reserved exclusively for qualified small businesses. The place of performance is designated as Hill City, South Dakota, with a zip code of 57745, and the contract is issued under the Black Hills National Forest, part of the U.S. Department of Agriculture. The solicitation was posted on July 30, 2026, and responses must be submitted by 3:00 PM on August 7, 2026. This is a subcontract opportunity, meaning the winning vendor will be contracted to produce the cattle guard grilles as part of a larger federal infrastructure or land management effort. The requirement emphasizes adherence to exact engineering drawings and material specifications to ensure compatibility with existing installations and compliance with USDA standards for rural and forested land applications.

Black Hills National Forest

POSTED

DEADLINE

Cattleguard Grilles

Solicitation # 1240LP26Q0139

The Black Hills National Forest, under the U.S. Department of Agriculture, is soliciting bids for cattleguard grilles through a Small Business Set Aside contracting opportunity with solicitation number 1240LP26Q0139, posted on July 30, 2026, and with a response deadline of August 7, 2026, at 3:00 PM Eastern Time. This procurement is classified under NAICS code 332323, indicating it pertains to the manufacturing of metal structural components, and is exclusively reserved for small businesses. The contract requires delivery and performance at Hill City, South Dakota, with the primary point of contact being Sabrina Wilfong, reachable via phone at 8702188428 or email at sabrina.wilfong@usda.gov. All technical specifications and requirements are detailed in the attached solicitation documents, which vendors must review thoroughly before submitting a proposal. The contracting office is located in Custer, South Dakota, with a zip code of 57730.

Black Hills National Forest

POSTED

DEADLINE

Supply of Optional Accessories (Drip Trays, Additional Shelves, 3-Year Warranty)The contract involves the supply of corrosion-resistant drip trays and additional shelves, specifically designed for use by the Department of National Defence under the Government of Canada, with performance required in Québec. These components are intended as optional accessories to enhance functionality and durability in operational environments. Alongside the physical items, the contract includes a comprehensive three-year warranty service covering all maintenance and repair support, ensuring prolonged reliability and operational readiness of the installed equipment. The solicitation is issued as a subcontract under NAICS code 332323, with responses due by August 14, 2026, and the opportunity was posted on July 30, 2026. The procurement is part of a broader effort to maintain and upgrade critical infrastructure with materials capable of withstanding harsh conditions.

Department of National Defence

POSTED

DEADLINE

Roof Hatch, Access Ladder, and Crossover Ship Ladder InstallationThe contract involves the removal and replacement of existing roof hatches, access ladders, and roof-to-roof ladders with new crossover ship ladders, as specified in the provided engineering drawings. The work is intended to upgrade safety and accessibility features on existing structures, ensuring compliance with current operational and regulatory standards. All installations must be performed in strict accordance with the technical specifications and layout plans referenced in the contract documents. This is a subcontract under the Georgia Department of Administrative Services, issued by the Cobb County Board of Education, with a response deadline of September 1, 2026. The NAICS code 332323 indicates the scope falls under metal window and door manufacturing, suggesting the work may involve custom-fabricated components or specialized equipment. The contract does not specify a location beyond the state of Georgia, and no set-aside provisions or point of contact information are provided. Bidders must prepare submissions by the stated deadline and ensure alignment with all technical requirements outlined in the drawings.

Cobb County Board of Education

POSTED

DEADLINE

in about 1 month

Loop Clamp (NSN 5340012607833) SupplyThe contract involves the supply of 16 commercial off-the-shelf loop clamps identified by NSN 5340012607833, which must fully comply with DLA packaging standards and National Stock Number requirements. The opportunity is structured as a subcontract under the NAICS code 332323 and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The clamps are destined for performance at APO, zip code 09494-4640, with all deliveries expected to meet exacting military specifications for fit, form, and function. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with no set-aside classification applied, making it open to qualified suppliers without restriction. Interested parties must ensure strict adherence to DLA's packaging and labeling protocols to avoid rejection.

LAND SUPPLY CHAIN

POSTED

DEADLINE

HUMIDIFIER, ASSEMBLY

Solicitation # SPE8E8-26-T-4912

The contract is for the procurement of one humidifier assembly with NSN 4520-01-616-2303 and purchase request number 7017659294, under solicitation SPE8E8-26-T-4912, issued by the Defense Logistics Agency. Delivery is required within 20 days to Fort Hood, Texas, with shipment FOB origin and must be traceable via non-parcel post means. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific handling, wrapping, and marking requirements, and must be palletized in compliance with DLA packaging guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for specified exemptions such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. The contract integrates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. Inspection and acceptance occur at the destination, and quantity variance is strictly controlled at plus or minus zero percent. The supply is to be delivered to a designated military installation within the III Corps Tactical Area, with special marking codes indicating no additional requirements beyond standard compliance. The contract data includes contact information for Alexis Selby at DLA, a North American Industry Classification System code of 332323, and a required delivery date of July 27, 2026. Government-specific identifiers and logistics codes are included for internal tracking, and the solicitation response deadline falls on August 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aluminum (Al) Protection Shield Supply

Texas A&M University

POSTED

DEADLINE

Mobile Shelters and Rapid-Deployment Shelter SystemsThe contract pertains to the supply of mobile and modular shelter systems intended for rapid deployment in operational field environments, with emphasis on durability and resilience under harsh environmental conditions. These shelters are designed to support military and defense operations by providing temporary yet robust accommodation and functional spaces that can be quickly assembled and relocated as mission requirements evolve. The work is classified under NAICS code 332323, indicating manufacturing of building structures for mobile or modular use, and is issued as a subcontract under the Department of Defense through the W6QK Acc-Dta organization. Performance of the contract is located in Warren, with a response deadline set for August 29, 2026, and the opportunity was posted on July 29, 2026. The shelters must meet stringent operational standards for transportability, structural integrity, climate adaptability, and ease of field maintenance to ensure reliable performance in varied and challenging terrains.

POSTED

DEADLINE

Transportable Enclosure & ISO Container IntegrationThe contract requires the design and fabrication of a transportable, modular manufacturing unit engineered to fit within a standard ISO or ISU-90 container, ensuring compatibility with global logistics systems. The unit must be fully functional and self-contained, capable of being rapidly deployed via C-130 aircraft, commercial or military trucks, or helicopter sling-load operations, without requiring extensive setup or external infrastructure. Emphasis is placed on durability, ease of transport, and operational readiness under field conditions, making it suitable for dynamic military or contingency environments. The manufacturing unit must integrate seamlessly with the container structure while maintaining structural integrity during transit and deployment. It should support core manufacturing functions, likely including precision tooling, power systems, climate control, and secure data connectivity, all calibrated to operate reliably in austere locations. The work falls under NAICS code 332323, indicating specialized fabrication of metal containers and related components, and is classified as a subcontract opportunity managed by the Department of Defense through office FA8684 Aflcmc Rodk. The proposal deadline is August 28, 2026, with performance expected at Edwards, and the project demands adherence to military-grade standards for portability, resilience, and rapid deployment.

FA8684 Aflcmc Rodk

POSTED

DEADLINE

More opportunities from Department Of Defense → W072 Endist Pittsburgh

Same awarding agency

Insulation Resistance Testing Services

Solicitation # W911WN26QA564

The U.S. Army Corps of Engineers, Pittsburgh District, is seeking qualified small business concerns to perform insulation resistance testing, commonly known as megger testing, at four locks and dams located in Pennsylvania and West Virginia: Opekiska, Hildebrand, Morgantown, and Point Marion. The contractor must provide all labor, supervision, transportation, calibrated testing equipment, tools, and incidental services necessary to inspect electrical cables, coordinate hazardous-energy-control activities, conduct conductor-to-conductor and conductor-to-ground insulation resistance tests, document results, restore circuits to service, and submit final reports. This is a firm-fixed-price requirement with a single contract line item and a 90-day period of performance from the date of award. The acquisition is strictly a 100 percent small business set-aside under NAICS code 238210, with a size standard of $19 million in average annual receipts. Only eligible small businesses may respond, including the five existing Pittsburgh District Electrical Services Blanket Purchase Agreement (BPA) holders; if a current BPA holder is selected, a call will be issued under their existing agreement, whereas a non-BPA awardee will first have a new Electrical Services BPA established before issuance of the call. Testing must adhere to specified technical standards, including NFPA 70, NFPA 70B, ANSI/NETA ATS-2025, OSHA 29 CFR 1910, and EM 385-1-1, with voltage applications of 500 volts DC for 300-volt rated cables and 1000 volts DC for 600-volt rated cables, and valid readings must remain stable for at least 15 seconds over a one-minute duration. Measurements must include phase-to-phase, phase-to-ground, and phase-to-neutral, all conducted per manufacturer procedures, with results documented as pass or fail in the final report. Inspections and acceptance occur on-site at the project locations, with the contractor responsible for execution and the Government retaining authority for review and formal acceptance. All personnel must undergo NCIC-III and TSDB background checks for unescorted site access, comply with E-Verify requirements, complete initial security awareness training within 30 days of award, and follow strict identification, access control, and force protection protocols. Wage rates for labor categories are established under the Service Contract Act, and compliance with Davis-Bacon requirements, including conformance requests for unlisted classifications,

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Dashields Locks and Dam Hydraulic System Upgrade

Solicitation # W911WN26RA012

The Dashields Locks and Dam Hydraulic System Upgrade project entails the complete replacement of the existing hydraulic system with a new, modernized system at the facility located in Coraopolis, Pennsylvania, along the Ohio River. This includes the demolition and removal of all existing hydraulic components such as motors, pumps, reservoirs, filters, piping, valves, and manifolds, with embedded piping being drained, cut flush with concrete, and abandoned in place. The contractor must furnish and install three new hydraulic power units (HPUs) within two newly constructed two-story buildings on the land and middle lock walls, and a fourth HPU on an elevated platform in the river wall, all designed and built per contract drawings and performance specifications. The new HPUs will deliver hydraulic power through stainless-steel piping and manifold-mounted components to nine new cylinders provided by the contractor and five provided by the government. All new hydraulic and control systems must be integrated with newly installed electronic control panels within each HPU building and an additional panel in the middle wall operations building, alongside new control consoles located in three existing and one newly constructed one-story control shelter, which the contractor is also responsible for designing and building. Associated electrical work involves removing old wiring, junction boxes, switches, and hardware, while civil work includes concrete demolition and placement to support new buildings, utility trenches, and routing for piping and cabling. A geotechnical and civil site analysis is required to verify foundation integrity and drainage, with minimal steel grating installed over utility trenches. All new equipment must be thoroughly tested and commissioned before handover. Due to the site’s location on the Ohio River, a floating work plant and work boats are mandatory for construction activities. As-built drawings must be stamped by a registered Professional Engineer, and the entire project must be completed within 730 days after written Notice to Proceed. The acquisition is issued as a 100% Small Business Set-Aside under NAICS code 237990, with a size standard of $45 million, and will be awarded as a Firm-Fixed-Price contract. Offerors must be registered in SAM.gov with active status and registered in PIEE with the Proposal Manager role to submit proposals. The RFP was issued on or about June 18, 2026, with amendments released through July 2026, and responses are due by August 18, 2026.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Town of Cairo - Water System Improvement Project

Solicitation # W911WN26BA011

The U.S. Army Corps of Engineers Pittsburgh District is undertaking significant water system improvements in the Town of Cairo, West Virginia, aiming to modernize aging infrastructure across three primary areas: water distribution lines, meter settings, and a storage tank. The project involves installing roughly 5,600 linear feet of 6-inch water line, 450 feet of 4-inch line, and 1,750 feet of 2-inch line, along with 22 gate valves, 18 line tie-ins, 11 new fire hydrants, and the removal of 13 existing hydrants. Road restoration totaling 8,250 linear feet will accompany these upgrades, encompassing HMA, gravel, and concrete surfaces within and outside state rights-of-way. Additionally, approximately 6,800 linear feet of polyethylene service tubing, sized from 3/4-inch to 2-inch, will be installed with 195 new meter settings and 188 customer reconnections, while 119 existing service saddles are to be repaired or replaced. The water storage tank will be drained, inspected, cleaned, repaired, disinfected, and refilled to ensure safe and reliable supply. All work must comply with USACE Construction Quality Management standards, and the contractor is fully responsible for supplying materials and properly disposing or recycling all removed components at licensed facilities. The contract is valued between one and five million dollars and will be awarded as a Firm-Fixed-Price agreement through full and open competition. Bids must be submitted via the Procurement Integrated Enterprise Environment (PIEE) following the issuance of the Invitation for Bid on or about July 17, 2026, with a deadline of September 8, 2026. Companies must be actively registered in the System for Award Management (SAM) and possess the Proposal Manager role in PIEE to submit a bid; registration in both systems can take at least ten business days and must remain active through award and performance. The project falls under NAICS Code 237110 with a small business size standard of $45 million. The place of performance is Cairo, West Virginia, with the contracting office located in Pittsburgh, Pennsylvania. All interested parties are encouraged to participate, and no hardcopies of solicitation documents will be provided. The primary point of contact for inquiries is Aaron Barr, with secondary support from Leanna Lesefka, both reachable through official U.S. Army Corps of

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month

Specialized Electrical Testing Equipment Rental/SupplyThe contract seeks the supply or rental of calibrated megger testers, VLF test sets, and infrared thermography tools to support electrical testing operations at remote U.S. Army Corps of Engineers sites, with performance centered in Fairmont, West Virginia, under zip code 26554. Equipment must be fully calibrated and ready for immediate deployment to ensure accurate diagnostics and safety compliance in field conditions. The acquisition is structured as a subcontract with a total small business set-aside under SBA guidelines, reserving eligibility exclusively for small businesses as defined by the NAICS code 423830, which pertains to miscellaneous electronic parts and equipment merchants. All proposals are due by August 10, 2026, at 9:00 PM Eastern Time, and the solicitation was posted on July 27, 2026, under the Department of Defense’s W072 Endist Pittsburgh office. Respondents are expected to meet strict calibration, delivery, and maintenance standards to support critical infrastructure evaluations in remote and often challenging environments.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Security & Access Compliance CoordinationThe contract requires comprehensive coordination of security and access compliance for contractor personnel, focusing on managing background checks and the secure submission of personally identifiable information through the Department of Defense Secure Access File Environment. It mandates strict adherence to National Crime Information Center Level III and Terrorist Screening Database vetting protocols to ensure all individuals granted access meet federal security standards. The work must be executed in accordance with evolving regulatory requirements to maintain compliance across the entire contractor lifecycle. This is a total small business set-aside subcontract under NAICS code 561612, awarded by the Department of Defense through W072 Endist Pittsburgh, with performance designated to occur in Fairmont, West Virginia, at ZIP code 26554. Bids must be submitted by August 10, 2026, and the opportunity was posted on July 27, 2026. The scope centers on ensuring seamless integration of security processes with DoD systems while maintaining full accountability for personnel vetting and PII protection, all within a small business contractual framework.

Security Guards and Patrol Services

POSTED

DEADLINE

Field Data Collection & Reporting ServicesThe contract seeks a small business to provide field data collection and reporting services focused on megger test data, including accurate logging, formatting, and generation of pass/fail reports that adhere strictly to USACE reporting standards. All work must be performed in Fairmont, West Virginia, with strict compliance required for data integrity and regulatory alignment. The opportunity is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 541330 for engineering services. Proposals must be submitted by August 10, 2026, and the contract is issued under the Department of Defense through W072 Endist Pittsburgh. While no point of contact is listed, all communications and submissions must follow federal acquisition guidelines, and performance is tied to precise technical specifications for test data handling and reporting formats. The location of performance is firmly established, and contractors are expected to ensure all deliverables meet U.S. Army Corps of Engineers requirements without deviations.

Engineering Services

POSTED

DEADLINE

Electrical Safety & Hazard Analysis Documentation SupportThe contract seeks qualified small businesses to develop and maintain comprehensive safety documentation for electrical operations at U.S. Army Corps of Engineers facilities, specifically in Fairmont, West Virginia. The work involves creating Accident Prevention Plans, Activity Hazard Analyses, and field condition logs that strictly adhere to the requirements of EM 385-1-1, OSHA standards, and NFPA 70E to ensure compliance with federal electrical safety regulations. All documentation must be accurate, up-to-date, and tailored to the specific hazards present during field operations, supporting safe work practices in potentially high-risk environments. This is a total small business set-aside under NAICS code 541380, meaning only small business concerns can compete for performance. The opportunity is issued as a subcontract, indicating it may be part of a larger government contract structure under the Department of Defense, with the managing office identified as W072 Endist Pittsburgh. Prospective bidders must submit responses by August 10, 2026, and are expected to demonstrate expertise in industrial safety documentation, knowledge of military and federal safety codes, and the ability to work on-site at USACE locations to gather real-time field conditions. Successful performance requires consistent collaboration with site personnel and strict adherence to procedural and regulatory precision throughout the contract term.

Testing Laboratories and Services

POSTED

DEADLINE

Electrical Insulation Resistance (Megger) Testing ServicesThe contract calls for the performance of electrical insulation resistance testing, commonly known as megger testing, on electrical cables across four U.S. Army Corps of Engineers lock and dam facilities. The scope includes conducting conductor-to-conductor and conductor-to-ground tests to evaluate cable integrity, restoring circuits after testing, and delivering comprehensive test reports for each location. All work must be completed in accordance with industry standards to ensure the safety and reliability of the electrical systems at these critical infrastructure sites. The place of performance is designated as Fairmont, West Virginia, with testing expected to occur at multiple nearby lock and dam sites within the region. This is a subcontract under a Total Small Business Set-Aside, meaning only small business concerns as defined by the SBA are eligible to bid, with the NAICS code 238210 applying to electrical contracting services. The solicitation was posted on July 27, 2026, and responses are due by August 10, 2026, at 9:00 PM Eastern Time. The contracting activity falls under the U.S. Department of Defense through the W072 Endist Pittsburgh office, and the successful bidder will be required to meet all technical, safety, and reporting requirements to support the operational readiness of the facilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Purchase of Conemaugh Gantry Crane Hoist Brakes

Solicitation # W911WN26QA053

The U.S. Army Corps of Engineers, through the Office of W072 Endist Pittsburgh in Pittsburgh, Pennsylvania, is soliciting bids for the purchase of hoist brakes for the gantry crane at Conemaugh Dam under solicitation number W911WN26QA053. This is a total small business set-aside as defined by FAR 19.5, meaning only small businesses certified under the Small Business Administration program are eligible to respond. The contract falls under NAICS code 332999 for other fabricated metal product manufacturing. Vendors must complete and submit the W911WN26QA053 form and review Attachment 1, which contains the technical specifications for the gantry hoist brakes. There will be no formal site visit, and all requirements must be met based on the provided documentation. Responses are due by August 10, 2026, at 2:00 PM Eastern Time, with the point of contact being Isaiah Johnson at isaiah.m.johnson@usace.army.mil.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Crooked Creek Jib Crane Work Platform and Safety Updates

Solicitation # W911WN26QA044

The U.S. Army Corps of Engineers, Pittsburgh District, is seeking a contractor to install a structural steel work platform on the exterior of the Control Tower at Crooked Creek Lake in Armstrong County, Pennsylvania, to enable safe and effective maintenance of an outdated jib crane that has gone without regular service since the 1990s. The crane, critical for operating stoplogs on the raking platform, is currently unreachable without unsafe methods such as leaning from a ladder or rappelling. To facilitate access, the existing ladder cage will be removed in alignment with updated OSHA standards that prohibit such cages, while the existing fall protection system remains in place. The platform, constructed with aluminum bar grating and handrails, will be positioned to allow workers to walk the full length of the parked jib crane for routine maintenance. A mezzanine slide gate will permit the crane’s hoist to swing clear of the platform’s railing without obstruction. To comply with fall protection regulations, a step-off platform will be installed between the work platform and the raking platform to ensure no free fall exceeds 24 feet; no additional fall protection is required on the tower’s exterior. Concurrently, the exterior ladder near the platform will be updated to meet current safety codes. The contract is a Firm-Fixed Price award under a 100% Small Business Set-Aside, with a performance period of 365 calendar days after Notice to Proceed. The NAICS code is 237990 with a size standard of $45 million, and submissions must be made electronically via PIEE and SAM.gov; hard copy requests are not accepted. Amendment 0001 has canceled this solicitation.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

VIAVI T-BERD Analyzer Purchase

Solicitation # W911WN26Q1BU2

The U.S. Army Corps of Engineers, Pittsburgh District, is preparing to issue a solicitation for the procurement of two T-BERD handheld test instruments from the TB5800-FAMILY3 series, along with the TB/MTS 5800 Family Configurator and dual-port 100G capabilities, to be delivered to authorized distributors. This procurement is identified under solicitation number W911WN26Q1BU2, with a posted date of July 17, 2026, and falls under NAICS code 334515 for other electronic component manufacturing. The contracting office is part of the Department of Defense, specifically under W072 Endist Pittsburgh, located at 15222-4198 in Pittsburgh, Pennsylvania. Interested vendors are directed to contact Contract Specialist Isaiah Johnson at isaiah.m.johnson@usace.army.mil to express interest and obtain further details. The place of performance and delivery specifics are not yet defined, and no set-aside type has been designated for this opportunity.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Shenango River Lake Water Tank Rehabilitation Project

Solicitation # W911WN26BA012

The U.S. Army Corps of Engineers, Pittsburgh District, is undertaking the rehabilitation of the elevated water tank at Shenango River Lake in Mercer County, Pennsylvania, with work focused on replacing critical interior components including all piping, valves, risers, overflow and drain lines, heat tracing, insulation, supports, and appurtenances in kind. The project also involves removing and replacing the interior 6-inch concrete slab and removable grating to accommodate new embedded piping, along with upgrading the interior electrical systems by replacing the Lighting Panel, Safety Switch, Cathodic Protection Panel, and Pump Control Panel to functionally match existing configurations. The existing access ladder will be removed and replaced with an OSHA-compliant climbing system featuring a flexible cable and full body harness for worker safety. All removed materials, including electrical equipment and construction waste, must be disposed of at licensed commercial facilities. Work will occur near flood mitigation and recreation areas, and the tank must be emptied during the off-season in either fall 2026/winter 2027 or fall 2027/winter 2028, with refill mandated by May 15 of the following year to ensure public access to recreational areas. Substantial completion requires full installation, testing, disinfection, and government acceptance of all water-contact equipment. The project falls under NAICS code 237110 and is a 100% Small Business Set-Aside with a size standard of $45 million, awarded as a Firm Fixed-Price contract. The Invitation for Bids will be released via PIEE on or about May 19, 2026, with a 540-calendar-day performance period following Notice to Proceed. Bidders must maintain active SAM and PIEE registrations with the Proposal Manager role, with SAM registration required to be active at time of bid submission and throughout the award period.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE