BRL- CAD Software Development and User Support

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is W911QX-17-T-0014. This acquisition is issued as a Request for Quote (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-92 effective 19 Dec 2016. (iv) This acquisition is set-aside for HUBZone Small Businesses. The associated NAICS code is 541330. The small business size standard is $15.0 million. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN 0001: BRL-CAD Software Development and Support (Firm Fixed Price (FFP) CLIN) The Contractor shall provide the requirements as stated in the performance work statement (PWS), Quantity (QTY) 12 months CLIN 0002: Travel (Unpriced FFP CLIN) The purpose of this CLIN is to cover the cost of incidental travel and incidental Other Direct Costs (ODCs) by the Contractor. The Contractor may bill against this unpriced line item (not to exceed (NTE) $10,000.00 annually) for Contracting Officer's Representative (COR) approved travel/ODCs no more than once per month. In accordance with FAR 13.302-2, the $10,000.00 NTE monetary limitation is an obligation subject to adjustment when the firm price is established. The Contracting Officer will establish the firm fixed price for this CLIN via unilateral modification on an annual basis. The Government is not obligated to pay for, and the Contractor is not obligated to incur, any repair costs incurred in excess of $10,000.00, QTY 1 LOT CLIN 0003: Data The Contractor shall furnish all data in accordance with the PWS and the DD1423s (CDRLs). CLIN 0004: Contractor Manpower Reporting (CMR) Cost for Providing Accounting for Contract Services - Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section C. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil. CLIN 0005 (Option Year one (1)): BRL-CAD Software Development and Support (Firm Fixed Price (FFP) CLIN) The Contractor shall provide the requirements as stated in the performance work statement (PWS), Quantity (QTY) 12 months CLIN 0006: Travel/ODC (Option Year one (1)): (Unpriced FFP CLIN) The purpose of this CLIN is to cover the cost of incidental travel and incidental Other Direct Costs (ODCs) by the Contractor. The Contractor may bill against this unpriced line item (not to exceed (NTE) $10,000.00 annually) for Contracting Officer's Representative (COR) approved travel/ODCs no more than once per month. In accordance with FAR 13.302-2, the $10,000.00 NTE monetary limitation is an obligation subject to adjustment when the firm price is established. The Contracting Officer will establish the firm fixed price for this CLIN via unilateral modification on an annual basis. The Government is not obligated to pay for, and the Contractor is not obligated to incur, any repair costs incurred in excess of $10,000.00, QTY 1 LOT CLIN 0007 (Option Year one (1)): Contractor Manpower Reporting (CMR) Cost for Providing Accounting for Contract Services - Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section C. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil. CLIN 0008 (Option Year two (2)): BRL-CAD Software Development and Support (Firm Fixed Price (FFP) CLIN) The Contractor shall provide the requirements as stated in the performance work statement (PWS), Quantity (QTY) 12 months CLIN 0009: Travel/ODC (Option Year two (2)): (Unpriced FFP CLIN) The purpose of this CLIN is to cover the cost of incidental travel and incidental Other Direct Costs (ODCs) by the Contractor. The Contractor may bill against this unpriced line item (not to exceed (NTE) $10,000.00 annually) for Contracting Officer's Representative (COR) approved travel/ODCs no more than once per month. In accordance with FAR 13.302-2, the $10,000.00 NTE monetary limitation is an obligation subject to adjustment when the firm price is established. The Contracting Officer will establish the firm fixed price for this CLIN via unilateral modification on an annual basis. The Government is not obligated to pay for, and the Contractor is not obligated to incur, any repair costs incurred in excess of $10,000.00, QTY 1 LOT CLIN 0010 (Option Year two (2)): Contractor Manpower Reporting (CMR) Cost for Providing Accounting for Contract Services - Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section C. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil CLIN 0011 (Option Year three (3)): BRL-CAD Software Development and Support (Firm Fixed Price (FFP) CLIN) The Contractor shall provide the requirements as stated in the performance work statement (PWS), Quantity (QTY) 12 months CLIN 0012: Travel/ODC (Option Year three (3)): (Unpriced FFP CLIN) The purpose of this CLIN is to cover the cost of incidental travel and incidental Other Direct Costs (ODCs) by the Contractor. The Contractor may bill against this unpriced line item (not to exceed (NTE) $10,000.00 annually) for Contracting Officer's Representative (COR) approved travel/ODCs no more than once per month. In accordance with FAR 13.302-2, the $10,000.00 NTE monetary limitation is an obligation subject to adjustment when the firm price is established. The Contracting Officer will establish the firm fixed price for this CLIN via unilateral modification on an annual basis. The Government is not obligated to pay for, and the Contractor is not obligated to incur, any repair costs incurred in excess of $10,000.00, QTY 1 LOT CLIN 0013 (Option Year three (3)): Contractor Manpower Reporting (CMR) Cost for Providing Accounting for Contract Services - Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section C. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil CLIN 0014 (Option Year four (4)): BRL-CAD Software Development and Support (Firm Fixed Price (FFP) CLIN) The Contractor shall provide the requirements as stated in the performance work statement (PWS), Quantity (QTY) 12 months CLIN 0015: Travel/ODC (Option Year four (4)): (Unpriced FFP CLIN) The purpose of this CLIN is to cover the cost of incidental travel and incidental Other Direct Costs (ODCs) by the Contractor. The Contractor may bill against this unpriced line item (not to exceed (NTE) $10,000.00 annually) for Contracting Officer's Representative (COR) approved travel/ODCs no more than once per month. In accordance with FAR 13.302-2, the $10,000.00 NTE monetary limitation is an obligation subject to adjustment when the firm price is established. The Contracting Officer will establish the firm fixed price for this CLIN via unilateral modification on an annual basis. The Government is not obligated to pay for, and the Contractor is not obligated to incur, any repair costs incurred in excess of $10,000.00, QTY 1 LOT CLIN 0016 (Option Year four (4)): Contractor Manpower Reporting (CMR) Cost for Providing Accounting for Contract Services - Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section C. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil (vi) Description of requirements: Performance Work Statement (PWS) BRL- CAD Software Development and User Support for SLAD C.1 Background The Survivability/Lethality Analysis Directorate (SLAD) of the U.S. Army Research Laboratory (ARL) is the Army's focal point for survivability, lethality, and vulnerability (SLV) analysis and expertise. SLAD helps Program Managers (PMs) enhance system and soldier survivability/lethality in the systems they are developing. Results of SLAD's SLV efforts, against the full spectrum of battlefield threats, are provided to the PMs, Evaluators, and Department of the Army decision makers. SLAD conducts the necessary investigations, simulations, laboratory/field experiments, and analyses to quantify the SLV of Army and select foreign combat, combat support, and combat service support systems when faced with electronic warfare (EW), information warfare (IW), ballistic, directed energy, nuclear/biological/chemical (NBC) contamination effects, and environmental threats. SLAD is in need of additional engineering, software development, and analytical support in order to satisfy the needs of its customers. C.2 Objective The objective of this effort is for the Contractor to provide analytical, technical, and development support to SLAD for SLV Modeling and Simulation software development projects using best industry practices. C.3 Scope This project definition outlines the tasks required to ensure software engineering and development, and analysis support to SLAD. The Contractor shall perform tasks requiring the application of established methods, practices, and techniques, and shall recommend new procedures as applicable for SLV software development projects. The work ranges from specific tasks to complex work for which guidelines and precedents are usually applicable, but interpretation and analysis may be required. The Contractor shall apply professional judgment in providing software development, engineering, and analysis services or resolving problems of a procedural or factual nature. Assignment characteristics include, but are not limited to: gathering, researching, verifying and analyzing facts; skilled use of basic tools and techniques of the field (e.g., surveys, data bases, MS Windows based software, financial systems, data collection methods, JAVA, C); selecting and applying established methods, practices and procedures, requiring only minor changes; supporting in the development of work proposal documents using historical data and researching new sources and coordinating with managers, employees, or ARL Contractors to obtain information. Work products shall be delivered in both written and electronic format. Work shall be performed at SLAD facilities. C.4 Requirements The Contractor shall support experimental and applied research to assess technologies which minimize vulnerability, maximize lethality, and maximize survivability for those technologies in accordance with the following sections. Formal deliverables provided for C.4 marked in accordance with C.11 and provided electronically using appropriate operating system and software specified in C.14.1 and C.14.2. C.4.1 Ballistic Research Laboratory -Computer Aided Design (BRL-CAD) and Related Development C.4.1.1 The Contractor shall provide and implement a software engineering solution and related software development to produce software enhancements to the BRL-CAD project with the approval of the model manager. Major enhancements, that will require a quarter or more of effort to complete, shall have a project plan and requirements that will be reviewed and/or modified by the SLAD, Ballistics, Vulnerability, and Lethality Division (BVLD) Modeling and Simulation Technology Review Group (TRG) and the BVLD Enterprise Steering Committee (ESC). The project plan shall identify goals, risks, assets and costs associated with the project. A schedule of software development milestones shall also be provided. The end software product shall be tested by the Contractor to verify that the requirements are satisfied, and approved by the BRL-CAD Model Manager. C.4.1.2 The Contractor shall provide and implement a software engineering solution to perform maintenance on the BRL-CAD project. This maintenance shall be categorized, tracked and documented. The major categories of maintenance are corrective, adaptive, perfective, and preventive maintenance. C.4.1.3 The Contractor shall support and inform the TRG or ESC of all user-visible software changes and bug fixes. C.4.1.4 The Contractor shall provide help desk support for BRL-CAD and related software packages. The Contractor shall identify, analyze, develop work-arounds, and eliminate common problems with BRL-CAD encountered by users. Helpdesk activities shall be documented in monthly e-mail progress reports the Contractor in order to inform end users about commonly asked questions, issues, and their resolutions. C.4.2 System Development The Contractor shall provide code that is able to be run on all BVLD development and production machines (workstations and servers) that use Mac OS X, FreeBSD, Windows, and Linux operating systems as well work seamlessly with the related software (e.g. Source Forge and Subversion) that supports the software development activities. C.4.3 Software Development The Contractor shall provide software development for any of the SLV software activities within SLAD (BRL-CAD, MUVES, ORCA, VSL, etc.) to include gathering requirements, designing the software, writing software, developing test cases, writing user documentation, and providing user training. C.4.4 Briefing Materials, Technical Papers, and Plans C.4.4.1 The Contractor shall prepare briefing materials, technical papers, and plans addressing technical projects, processes and capabilities, for presentation within SLAD, to SLAD customers and higher headquarters. The Contractor shall provide this to the COR on an ad-hoc basis. C.4.4.2 The Contractor shall prepare multi-media content for World-Wide-Web presence. C.5 Personnel Management The Contractor shall retain the appropriate number of key personnel, as identified in the key personnel clause in the contract award, who have the necessary skills, education, and experience to effectively meet contract requirements. The Contractor shall maintain an active training, recruitment, and retention program to ensure qualified and clearable personnel sufficient to meet the contract requirements, including fill rate, are made available to support this effort. C.6 Program Management C.6.1 The Contractor shall provide one (1) Program Manager (PM) to be available via e-mail and telephone during normal work hours (reference C.10). This position may be located at the Contractor's facility. C.6.2 To facilitate efficient operations under this contract, the Contractor shall ensure the PM: C.6.2.1 Serves as the main point of contact for all Contractor personnel C.6.2.2 Is responsible for overall management of the contract C.6.2.3 Conducts regularly scheduled meetings with the COR at a minimum of once per month, and additional meetings at the discretion of the COR. C.6.2.4 Has a technical background that facilitates understanding of Government technical requirements and communication with the COR. C.6.2.5 Has a management background that facilitates supervision of Contractor personnel's performance. C.6.2.6 Ensures that all work performed meets the PWS requirements within the funding, timing and staffing constraints of the contract. C.6.2.7 Facilitates effective planning and accomplishment of critical objectives in a timely manner. C.6.2.8 Responds within twenty-four (24) hours and has emergency contact information available to the COR at all times. C.6.2.9 If the Contractor uses subcontractors, manages all subcontractor interface requirements. C.6.2.10 Notifies the COR, immediately, of any problems or issues. C.6.3 The PM shall have the following minimum Qualifications: C.6.3.1 A minimum of five (5) years of supervisory experience to provide supervision, direction, and control of Contractor personnel. C.6.3.2 Demonstrate successful past project management within the past five (5) years, through certification such as Project Management Professional, equivalent certification or experience documented in resume. C.6.3.3 Familiarity with complex laboratory operations and associated personnel qualifications. C.6.3.4 At a minimum, a scientific or engineering degree from an accredited school. Accredited schools are those reported to the US Department of Education and maintained within the Secretary of Education's database. C.7 Recruitment and Retention C.7.1 The Contractor shall provide a recruitment and retention plan sufficient for recruiting, attracting, hiring and retaining the high caliber scientists, engineers, and subject matter experts necessary to meet the personnel qualification requirements. The Contractor's recruitment plan shall describe and demonstrate an approach for recruiting, vetting, preparing, hiring, and replacing personnel with the appropriate background, knowledge, and skills/expertise necessary to meet the requirements. C.7.2 The Contractor's retention plan shall include: C.7.2.1 Procedures to ensure Contractor personnel meet and maintain the skills/expertise necessary to meet the requirements established in this PWS. C.7.2.2 Ensure performance of Contractor personnel meet the requirements established in this PWS. C.7.2.3 A Quality Assurance Surveillance Plan (QASP) that ensures proper oversight of personnel, training, certifications, subcontractors, and compliance with Operational Security requirements. C.7.2.4 Procedures to identifying and removing any personnel not adequately performing required activities. C.7.2.5 Procedures to help minimize disruption to government requirements caused by employee turnover, C.7.2.6 Procedures for addressing government concerns that the Contractor staff is not meeting requirements. C.7.2.7 Procedures for in processing new or returning employees. C.7.2.8 Procedures for out-processing departing employees. C.8 Program Management Plan C.8.1 The Contractor shall prepare a Program Management Plan. The Contractor shall submit the Program Management Plan to the COR in accordance with C.12.5 below. Program Management Plan Content: The Program Management Plan shall address at a minimum: C.8.1.1 Personnel Management Plan (see Section C.6) C.7.1.2 Occupational Safety and Health Program (see Section C.14) C.8.1.3 Safety Plan (see Section C.15) C.8.1.4 Telework Plan (see Section C.10) C.8.1.5 Additional Contractor procedures for ensuring efficient operation of this contract C.8.2 The Program Management Plan shall be maintained and implemented. The Contractor shall update and submit to the COR electronically and in hard copy a revised Program Management Plan on a bi-annual basis at a minimum. C.9 Contractor Products C.9.1 All products, including materials, software, source code and data, produced through the performance of this contract shall remain the sole property of ARL. The Contractor shall not use these items for any other purpose without prior written approval from ARL. Upon completion of this contract, the Contractor shall return all government furnished data, information, and materials. The Contractor shall remove and delete Government furnished data, information and materials from Contractor's computers and hard copy files. C.9.2 The Contractor shall place the BRL-CAD source code, as well as all files needed to build the BRL-CAD source tree, in the BRL-CAD project repository, unless otherwise required by the COR. All software committed to the BRL-CAD project repository shall adhere to the terms of the BRL-CAD license. No explicit survivability, lethality, and vulnerability (SLV) technologies shall be committed to the BRL-CAD project repository. C.9.3 All BRL-CAD-related software created and required to be delivered under the contract is to be copyrighted by the Contractor and the copyright is to be assigned to ARL per DFAR 252.227-7020(c) (2). C.9.4 All publicly released briefing materials, abstracts, technical papers, manuals, web content and reports shall adhere to the ARL FORM 1 process. All BRL-CAD related documentation shall be written so as to be approved for distribution A, Public Release in according with the release of open source code base. Documentation related to specific SVL tasks that may be required for further support under this contract will have distribution consistent with that specific task. This is subject to the approval by the BRL-CAD Model Manager. C.10 Place of Performance/Work Hours C.10.1 The Contractor shall perform C.3 at ARL facilities located in the Aberdeen Area of Aberdeen Proving Ground (APG-AA), Maryland. Travel to other facilities (Government and non-Government) may be required at the discretion of the COR. C.10.2 While working at APG-AA facilities, the work day shall be consistent with the options included in the current ARL Work Life Program, and subject to the approval of the COR. Cumulative work hours for a two (2) week period shall not exceed 80 hours with no more than 50 hours per week. The Contractor shall perform this effort from Monday through Friday, excluding Federal holidays. The Contractor shall request permission from the COR in writing and in advance to perform work outside of normal duty hours (i.e., 0630-1800, Monday through Friday). The Contractor shall request permission from the COR in writing and in advance to perform work on a Federal holiday, Saturday or Sunday. The Contractor shall attend meetings conducted Monday through Friday that lie outside the core work day hours of 0900-1500; most ARL meetings are scheduled between the hours of 0800-1700. C.10.3 The Contractor shall request permission from the COR in writing and in advance to perform work at places that do not concur with C.10.1 and/or with hours that do not concur with C.10.2. C.11 Release of Information - Distribution Statements C.11.1 Determination of the PWS document: Distribution A: Approved for public release; distribution is unlimited (22 September 2016) C.11.2 Determination for Information Generated from the Contract: Distribution F: Further dissemination only as authorized by Director, U.S. ARL, ATTN: RDRL-SLB-W, Aberdeen Proving Ground, MD 21005-5068 (22 September 2016) C.12 Meetings and Contractor Deliverables C.12.1 Kick Off Meeting: The Contractor shall meet with the COR, as well as the Branch Chief of RDRL-SLB-S, for a contract kick-off meeting within thirty (30) days after date of contract award. C.12.2 Monthly Reports: The Contractor shall provide Monthly Status Reports containing all efforts scheduled/accomplished for the reporting period and a schedule for the next sixty (60) days, current costs/status/updates, identified issues/problems with any action required by the Government. The Contractor shall provide the first monthly report to the COR on the first working day of the first whole month ACA. The Contractor shall provide all subsequent reports to the COR by the tenth (10th) day of every month thereafter. C.12.3 Monthly Funds and Man-Hour Expenditure Reports: The Contractor shall provide a Monthly Funds and Man-hour Expenditure Report due in conjunction with and corresponding to the Monthly Status Report in section C.11.2. The Contractor shall provide the first monthly report to the COR on the first working day of the first whole month after date of contract. The Contractor shall provide all subsequent reports to the COR by the tenth (10th) day of every month thereafter. These reports shall include cost breakout for each person and complete documentation of updates, conclusions, recommendations, and suggested approaches for each area as described in C.4. C.12.4 Software Engineering Solution: The Contractor shall provide a Software Engineering Solution to provide software enhancements in accordance with requirements at C.4.1. These enhancements shall have a Project Plan. This shall be provided to the COR within fourteen (14) days of proposed initiation dates for proposed software solutions. C.12.5 Software Development: The Contractor shall propose software development solutions in briefing format for review by the TRG or ESC on a quarterly basis in accordance with C.4.3. Approved development activities shall be reported on via monthly status reports to be provided to COR by the 10th of each month for activities incurred the month prior. C.12.6 Recruitment and Retention Plan: The Contractor shall provide a recruitment and retention plan within sixty (60) days after contract award. The Plan shall provide information sufficient for recruiting, attracting, hiring and retaining the high caliber scientists, engineers, and subject matter experts necessary to meet the personnel qualification requirements as stated in Section C.7. C.12.7 Program Management Plan: The Contractor shall submit the Program Management Plan in both electronically and hard copy thirty (30) days after date of contract award. The COR will provide approval or comments within two (2) weeks of receipt. The Contractor shall submit a final Program Management Plan to the COR both electronically and in hard copy within one (1) week of receipt of approval. The Plan shall contain the information as stated in section C.8. C.12.8 Annual Contract Summary Report: The Contractor shall provide an Annual Contract Summary Report detailing all work performed and deliverables received during that Period of Performance. The Contractor shall submit a summary technical report at the conclusion of every fiscal year and thirty (30) days prior to the end of the contract. The Government will review and respond within fifteen (15) days. The Contractor's final submissions are due within fifteen (15) days from receipt of Government remarks. These reports will contain a summary of major changes and enhancements done to the code during the contract period that was covered. C.13 Government Furnished Property, Equipment and Data C.13.1 The Government will provide the Contractor with ARL computer and network access (as deemed necessary by the COR) and project-specific licensed software access to perform MUVES 3 project tasks. The Contractor shall adhere to all software license agreements, user agreement, and memorandum of agreements. Contractor employees shall sign software license agreements, user agreement, and memorandum of agreements to use Government-owned computer assets (hardware or software). C.13.2 The Government will provide Contractor employees with access to object and source code for ORCA, VSL, MUVES, and other government programs required by this effort. The Government may, at the COR's discretion, provide Contractor employees with access to object and source code for other Government-owned or licensed software. C.13.3 The Government will provide Contractor employees working at APG-AA facilities with the use of conference room facilities, office equipment (such as facsimile machines, copiers, printers, document binding devices, electric staplers and shredders), telephones, and operating supplies (such as paper, toner, and staples). C.13.4 The Government will provide Contractor employees working at APG-AA facilities with access and use of the ARL's libraries, including research collections, electronic databases, and interlibrary loans to perform tasks. Contractor employees shall complete a need-to-know form (COSATI form) approved by the COR, verified by the ARL Security Office (for a favorable national authorization check) before ARL libraries and staff may be accessed. The ARL library staff may require verification by the COR prior to assisting a Contractor employee with a specific request from the ARL library collection or to borrow interlibrary loan materials. The Contractor shall obtain COR signature for all materials that a Contractor employee seeks to borrow from the ARL libraries. The Contractor employee shall promptly return all borrowed ARL library materials to the COR when finished with borrowed materials. The Contractor employee shall return all borrowed materials within 15 days prior to the end of the contract period of performance. The Contractor shall replace all unreturned materials borrowed by the Contractor in accordance with AR-735.17. C.14 Software packages and methodologies C.14.1 The Contractor shall use the following software operating systems: MAC OS (version X.8 and higher), Windows OS (version 7 and higher), and UNIX variants. C.14.2 The Contractor shall use the following software packages and tools: Microsoft Office [version 7 or higher; includes MS Word, MS Excel, MS PowerPoint, MS Access], Subversion version control system (SVN) (version 1.6 or higher); and Java development kit (JDK) (version 1.7 or higher), C, C++, shell scripting, NetBeans integrated development environment (version 8.0.1 or higher), and NetBeans rich client platform. C.14.3 The Contractor shall use the following Government-owned and maintained software packages: MUVES, BRL-CAD, ORCA, and VSL. Access to ARL owned codes (MUVES, BRL-CAD, and ORCA) will be made available at contract award. C.15 Safety and Medical Requirements C.15.1 The Contractor shall comply with Public Law 91-596 and each occupational safety and health standard promulgated under this act. The Contractor shall execute supervision to insure immediate compliance with pertinent provisions of applicable regulations. Safety regulations, standard operating procedures, and guidance issued by the Department of the Army, U.S. Army Material Command (AMC), U.S. Army Research Laboratory, and Aberdeen Proving Ground Installation Commander also apply to the Contractor. C.15.2 The Contractor shall perform all operations in strict compliance with all applicable safety and health procedures. The Contractor shall report incidents of injury or occupational illness or disease, and/or damages to Government property resulting from work performed at APG-AA location to the COR. Each incident shall be reported within 72 hours of occurrence and shall be delivered using applicable Government-furnished guidance and forms. C.16 Contractor Motor Vehicles Vehicle registration and certification of insurance are required for each vehicle driven onto APG-AA. Upon entry to APG-AA, each vehicle driver and adult vehicle occupant is required to show federal or state-issued identification (e.g., driver's license or identification issued by the Department of the Army) to authorized force protection personnel. Each vehicle entering APG-AA is also subject to random searches conducted by authorized force pr...