BRUSH, ARTIST'S

BRUSH,ARTIST'S
BRUSH,ARTIST'S
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
This technical description covers a 7/8 by 1/2 inch Fitch brush intended primarily for use in coating chairs, garden tools, ladders, metal furniture, radiators, scrollwork, small pipe, trellises, windows, etc. Salient Characteristics: Design and construction: Brushes shall consist of a handle with bristles held in place by means of a ferrule and setting compound. Bristle: The bristle shall be natural hog bristle 70 percent top size. The bristle shall be boiled or steamed and straightened so that it will not twist or curl, and shall be free from reconditioned bristle or adulterants. Ferrule: The ferrule shall be made from corrosion-resistant metal or metal made corrosion-resistant by electroplating. The ferrule shall have a minimum wall thickness of 0.2 mm (0.009 inch). The ferrule shall be seamless aluminum or lapped and soldered. The minimum lap shall be 3 mm (1/8 inch). Handle: The handle shall be of close-grained hardwood smoothly finished with varnish, lacquer, or other transparent organic finish; or the handle shall be of a synthetic material of any color. Assembly: The 7/8 by 1/2 inch brush shall be crimped or prick-punched at the handle end of the ferrule. Screw-type nails shall be used on brushes with synthetic handles. If brushes are nailed corrosion resistant nails shall be used. Handle: The handle shall be artist type Set: The butt end of the bristle shall be set in a setting compound made of brush maker s cement. Filler strips: The filler trips used to fill out the ferrule shall be made of wood, metal, or plastic. Trim: The brush shall have a cup-chiseled edge with flag end of the bristle preserved. The brush shall conform to the following physical requirements: Size: 7/8 by 1/2 inch Ferrule: Width at bristle end: 7/8 inch minimum Thickness at bristle end: 1/2 inch minimum Diameter, handle, end: 1/2 inch minimum Depth of ferrule: 1-7/8 inches, 1-27/32 inches minimum Thickness of metal in ferrule: 0.010 inches, 0.009 inches minimum Bristle: Hold in ferrule: 1/2 inch minimum Length of bristle out of ferrule: 1-7/8 inch minimum
SPE8E7-27-T-0002
SECTION B
Weight of bristle: 5/16 ounces Handle length out of ferrule: 8-1/4 +/-1/4 inches
Part number 8020-00-244-0156
MURALO COMPANY, INC., THE cage 0ZSS6 P/N E18163
DELAWARE PAINT COMPANY, LTD THE cage 5FUY6 P/N 156
SPECTRUM PAINT APPLICATOR CORP cage 1M4C5 P/N X2440156
THE DELAWARE PAINT COMPANY LTD 5FUY6 P/N 156
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018587942 0001 EA 12,491.000
NSN/MATERIAL:8020002440156
DELIVERY (IN DAYS):0082
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE8E7-27-T-0002
SECTION B
PR: 7018587942 PRLI: 0001 CONT’D
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:08/28/2026 Original Required Delivery Date:02/23/2027
SPE8E7-27-T-0002 NSN/Part Number: 8020-00-244-0156 Quantity: 12,491 EA Purchase Request: 7018587942QTY: 12491 Delivery: 82 days ADO