This Solicitation opportunity from Department Of Defense was posted on June 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BRUSH, PAINT

Awarded

SPE8E7-26-Q-0250Federal

Submission Closed06/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339994

New

DIBBS

High-Grade Hog Bristle Paint Brush SupplierThis subcontract through the Department of Defense and DLA DIST SAN JOAQUIN requires the supply of 378 high-grade hog bristle paint brushes for prime contractors. The brushes must be manufactured according to Basic CID A-A-3192A Revision A specifications, featuring a 3.5-inch size, 3.937-inch length, and 1.000-inch thickness. Delivery is set as FOB Origin to Tracy, California. The supplier must adhere to strict packaging and labeling standards, specifically RP001, ASTM D3951, and MIL-STD-129. Compliance with the Berry Amendment, the Buy American Act, and NIST SP 800-171 is mandatory. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 339994.

POSTED

DEADLINE

Supply of Utility Grade Synthetic Paint Brushes (NSN 8020-00-200-3487)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0259

Solicitation SPE8E7-27-T-0259 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 378 high-grade hog bristle paint brushes. The items must adhere to Basic CID A-A-3192A Revision A and meet specific dimensions, including a 3.5-inch size, a brush part length of 3.937 inches, and a thickness of 1.000 inch. Delivery is required within 167 days after order, with a need ship date of April 26, 2027, and an original required delivery date of June 18, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with all marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. The primary point of contact for this acquisition is Kelly Mitchell.

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0260

Solicitation SPE8E7-27-T-0260 is a request for quotations for the procurement of 2,784 high-grade synthetic filament paint brushes, identified by NSN 8020002454517. The items must adhere to Commercial Item Description A-A-3192A, specifically Type II, Grade A, Size 3, with a brush part length of 3.187 inches and a thickness of 1.000 inch. The contract is issued by DLA Troop Support Construction and Equipment, with a required delivery date of July 23, 2027, and a need ship date of July 18, 2027. Delivery is set for 250 days after the award, with terms specified as FOB Origin and delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement includes strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American and Balance of Payments Program under DFARS 252.225-7001, as well as cybersecurity reporting standards per DFARS 252.204-7012. Payment and invoicing must be processed through the Wide Area WorkFlow system. Evaluation for award may include a price preference for certified HUBZone Small Business Concerns, and the solicitation may be eligible for automated award. Quotations are due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0293

Solicitation SPE8E9-27-T-0293 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 8,500 synthetic filament paint brushes. The required items are Grade A high grade, size 1.5 (38 mm), with a brush part length of 2.563 inches and a thickness of 0.688 inches, identified by NSN 8020-00-559-9842. The procurement is fully competitive and must adhere to the technical specifications of Basic CID A-A-3192A Revision NR A. Delivery is required within 166 days after the order date, with a need ship date of April 25, 2027, and an original required delivery date of June 14, 2027. Shipping terms are FOB Origin, while inspection and acceptance will occur at the destination in Bremerton, Washington. The contract is designated as a HUBZone set-aside and requires compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS standards for safeguarding covered defense information. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, while marking must comply with MIL-STD-129. Invoicing and payment processing must be handled electronically through the Wide Area WorkFlow system. Offerors are required to provide representations regarding their small business status and the use of covered defense telecommunications equipment. Technical and quality requirements are further governed by the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0262

Solicitation SPE8E7-27-T-0262 is a request for quotations for the procurement of 6,475 synthetic paint roller covers, identified by NSN 8020-00-6826489. The required items must adhere to Commercial Item Description A-A-2851C, featuring a woven acrylic/modacrylic blend, a length of 7.00 inches, and a pile height of 3/8 inch. The contract is issued by DLA Distribution San Joaquin, with a need ship date of October 28, 2026, and an original required delivery date of March 7, 2027. Delivery is specified as FOB Origin with a delivery timeframe of 70 days, and both inspection and acceptance will occur at the destination in Tracy, California. The contractor must comply with rigorous packaging and marking standards, including ASTM D3951 and MIL-STD-129R(3), with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001), safeguarding of covered defense information (DFARS 252.204-7012), and prohibitions on covered defense telecommunications equipment. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow system. While some metadata suggests a small business set-aside, the primary solicitation text specifies that this RFQ is not a small business set-aside.

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0356

Solicitation SPE8E5-27-T-0356 is a request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment for the procurement of cleaning cloth, identified by NSN 7920-01-614-3522. The requirement consists of one box containing 100 individual cloths. The delivery is specified as FOB Origin with a required delivery date of October 29, 2026, and a delivery window of 20 days after the order. Inspection and acceptance will take place at the destination, with the final shipment directed to the Aviation Support Detachment at Joint Base McGuire-Dix-Lakehurst in Fort Dix, New Jersey. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. The items are classified as Type 2 (Code 4) with an extendable shelf life of 12 months per requirement RS055. Compliance with the Buy American and Balance of Payments Program is required for quotes exceeding the micro-purchase threshold, and the agency may apply a HUBZone price evaluation preference. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the submission of all quotes via the DLA Internet Bid Board System. Additionally, the contractor must comply with DFARS regulations regarding safeguarding covered defense information and the prohibition of certain telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0291

This solicitation, issued by the Department of Defense through DLA Troop Support Construction and Equipment MRO SVC I, is for the procurement of 5,130 synthetic filament paint brushes (NSN 8020-00-200-3487). The required brushes must be utility grade, size 4 (102 mm), with a brush part length of 2.937 inches and a thickness of 0.875 inches. The items are to be delivered to the DLA Distribution Depot Puget Sound in Bremerton, Washington, with a delivery period of 139 days and a required delivery date of May 8, 2027. The contract is designated as FOB Origin, and inspection and acceptance will occur at the destination. The procurement is fully competitive and is not a small business set-aside. Contractors must comply with several regulatory standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the DLA Master List of Technical and Quality Requirements. Key legal and regulatory requirements include adherence to the Buy American Act, the Berry Amendment, and DFARS clauses regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

146903 BRUSHES, TAPERED TUBE

Solicitation # 232689

The Los Angeles Department of Water and Power is seeking bids for the procurement of tapered tube brushes under solicitation number 232689. This opportunity is managed by the agency in California, with the place of performance located in Los Angeles. Interested parties must adhere to all submittal requirements detailed in the bid documentation. All bids must be submitted electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The solicitation was posted on October 26, 2026, and the deadline for responses is November 6, 2026, at 10:00 PM. For further inquiries, Eric P. Lau serves as the designated point of contact.

POSTED

DEADLINE

MOBL - Inmate Hygiene Products, Toothbrush

Solicitation # SRC0000037350

Solicitation SRC0000037350 is a request for inmate hygiene products, specifically toothbrushes, for the Alabama Department of Corrections in Mobile, Alabama. The procurement is managed by the State of Alabama Office of the Chief Procurement Officer and requires electronic submission through the Alabama Buys portal. The resulting contract may be renewed annually for up to five years or until a total contract value of 25,000 dollars is reached. Award evaluation is based on pricing, with the state reserving the right to analyze cost realism and price reasonableness, and may require proof of manufacturer reseller authorization, professional licenses, or insurance certificates. Suppliers must comply with several state-specific mandates, including registration with the Alabama Secretary of State for foreign entities, enrollment in E-Verify for those with employees in Alabama, and adherence to the Beason-Hammon Alabama Taxpayer and Citizen Protection Act. Payment must be accepted via electronic methods, such as EFT or state-issued P-cards, at no additional cost to the state. All delivered products are subject to inspection by the state in accordance with the Universal Commerce Code, and formal acceptance occurs only after a satisfactory inspection is completed.

Department Of Corrections, Mobile Wr

POSTED

DEADLINE

Supply of Artist’s Brushes (Commercial Off-the-Shelf Item)The contract entails the procurement and delivery of 5,700 units of artist’s brushes designated by NSN 8020006641375, classified as a commercial off-the-shelf item, to be supplied in full compliance with federal packaging, labeling, and logistics requirements. The shipment will be delivered on an FOB Origin basis, meaning all risk and responsibility transfer to the buyer once the carrier accepts the goods at the point of origin. This procurement is managed under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense, with the North American Industry Classification System code 339994 indicating it falls under Other Miscellaneous Manufacturing. The solicitation was posted on August 5, 2026, and performance is not restricted to a specific geographic location beyond the FOB terms. The contract identifier is SPE8E926V2075 and is accessible through the DIBBS system for official records.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Wipe Cloths SupplyThe contract requires the supply and delivery of five boxes of commercial wipe cloths, identified by NSN 6850014872859 and manufacturer part number AC9165, to Luke Air Force Base in Arizona. All items must fully comply with the specified contractual requirements and be delivered no later than August 20, 2026. Shipments must be sent using a traceable express method to ensure accurate monitoring and timely confirmation of delivery. This agreement is classified as a subcontract under the NAICS code 339994, and the contracting authority is the Defense Logistics Agency, operating under the Department of Defense. The solicitation details are tied to the contract reference SPE4AX16D9008 and delivery reference SPE4A726FA9K3, with the posting date listed as August 5, 2026.

Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

This solicitation, issued by the Department of Defense DDSP New Cumberland Facility, is for the procurement of 2,436 high-grade synthetic filament paint brushes. The brushes must adhere to Commercial Item Description A-A-3192A, specifically Type II Grade A, with a size of 4 inches, a part length of 3.687 inches, and a thickness of 1.000 inch. The items are identified by NSN 8020-00-245-4519 and are being procured through a fully competitive process. The contract requires compliance with several DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Delivery is required within 200 days after the order is placed. Interested parties must refer to the DLA Master List of Technical and Quality Requirements and the provided solicitation number SPE8E7-26-Q-0250 for full compliance details.

General Info

DoD procurement of 2,436 synthetic filament paint brushes delivered within 200 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Contract Value

$11,035.08

NAICS

339994 - Broom, Brush, and Mop Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

THE DELAWARE PAINT COMPANY LTD

Award Issued Date

07/07/2026, 12:00:00 AM UTC

Documents

SPE8E7-26-Q-0250.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJun 3

Solicitation

AwardedJul 7

Contract was awarded

Submission Closed

06/07/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressUSA

Contacts

Inessa Kaufman

contact@example.gov

+1 (555) 000-0000

Full Description

BRUSH,PAINT DESCRIPTION In accordance with Commercial Item Description A-A-3192A, Brushes, Paint, dated April 28, 2010 Type: II (Synthetic Filament) Grade: A (High Grade) Size: 4 (102 mm, 4.00") Brush Part Length: 3.687" Brush Part Thickness: 1.000" RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS (CIDS) MAY BE OBTAINED FROM THE WEB SITE
http://quicksearch.dla.mil/ http://quicksearch.dla.mil/
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 8020-00-245-4519 Quantity: 2,436 EA Purchase Request: 7015212113QTY: 2436 Delivery: 200 days ADO