Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUS, CONDUCTOR

Active
SPE4A6-26-T-11XLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five BUS, CONDUCTOR units with NSN 6150-01-444-8038 under solicitation SPE4A6-26-T-11XL, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days of award, with performance to take place in Tracy, California, 95304-5000. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical and quality standards identified by R or I numbers. Removal of government identification from non-accepted items and physical marking of bare items are mandatory per RQ011 and RQ017. Sampling and inspection procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may elect attribute or variable inspection under MIL-STD-1916 unless directed otherwise by the contract. The solicitation opened on August 4, 2026, with responses due by August 12, 2026, and the primary point of contact is Berkeley Vaughan, reachable via email and phone listed in the contract data.

General Info

Procure five BUS CONDUCTOR units, deliver in 171 days to Tracy, CA, comply with DoD quality and inspection standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11XL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Berkeley Vaughan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUS,CONDUCTOR
BUS,CONDUCTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR THE NSN/Part Number: 6150-01-444-8038 Quantity: 5 EA Purchase Request: 7017742230QTY: 5 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-5698
The contract pertains to the procurement of a rotary switch with NSN 5930-01-236-0272, quantity one unit, under purchase request 7017726926, with a delivery requirement of 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The alternate offeror must submit a complete data package that includes detailed information for both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5698, issued on August 4, 2026, with responses due by August 17, 2026. The contract is classified under NAICS code 334419 and is administered by the Electrical Devices Division of the Department of Defense. Performance will occur at Holloman AFB, ZIP 88330-7706, with Dondiego Boler listed as the primary point of contact, reachable via email and phone. No government identification removal requirements are applicable due to lack of available data.
ELECTRICAL DEVICES DIV

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5973
The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11YL
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-496-9541, in a quantity of 26 units, under solicitation SPE4A6-26-T-11YL, issued by the ASC Commodities Division of the Department of Defense. The procurement is a total small business set-aside, with responses due by August 12, 2026, and delivery required 291 days after order. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and explicit DLA authorization may access the controlled data. The place of performance is New Cumberland, PA, 17070-5002, and the primary point of contact is Jessica Fuentes-OSSIO, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12CF
The contract pertains to the procurement of four cable assemblies under solicitation SPE4A6-26-T-12CF, with a specific NSN 5995-01-610-0427 and a delivery deadline of 171 days after award. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels and sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The contractor must comply with DLA packaging standards, ensure physical identification and bare item marking, and remove government identification from non-accepted supplies. The technical data associated with this cable assembly is controlled under ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract also enforces CMMC Level 2 certification for any third-party assessor and applies covered defense information protocols, with all requirements binding under the version of the DLA Master List effective on the solicitation issue date. The point of contact for inquiries is Kory Walker of the Department of Defense’s ASC Commodities Division, and performance is required at New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12AC
This contract is for the procurement of 11 special-purpose electrical cable assemblies, designated by NSN 6150-01-469-9741, under solicitation SPE4A6-26-T-12AC. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed, transferred, or exported to foreign persons or entities without prior authorization from the Department of State or the Department of Commerce. This restriction applies universally, including to foreign nationals within the United States and to foreign subsidiaries of U.S. companies. Access to this controlled technical data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been officially approved by DLA. The Defense Logistics Agency enforces these requirements through DFARS 252.225-7048 and mandates adherence to its packaging and data handling standards. The delivery must be completed within 171 days after contract award, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the ASC Commodities Division of the Department of Defense, with Jessica Fuentes-Ossio listed as the primary point of contact. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 334419 for other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12JH
The contract pertains to the procurement of a wiring harness identified by part number PE20777 and NSN 6150991855341, with a total quantity of two units to be delivered FOB origin. Delivery is required within 171 days of contract award, with the original required delivery date set for March 16, 2027, and a needed ship date of January 31, 2027. All items must comply with DLA packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging must be palletized according to DLA procurement guidelines, and the delivery destination is clearly specified as the DLA Distribution San Joaquin warehouse in Tracy, California. Quality verification follows zero-defect sampling protocols consistent with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise defined. Inspection and acceptance occur at the destination point, with no variance allowed in quantity. The contract is issued under solicitation SPE4A6-26-T-12JH, and technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements. The unit of issue is each, at a price of $2.00 per unit, for a total contract value of $4.00. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under the NAICS code 334419, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-12JY
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-12JY, with a quantity of 16 units, each identified by NSN 5995-01-301-8654, to be delivered in 285 days to Robins Air Force Base, Georgia. The item is designated as a critical application item with approved suppliers including TE Connectivity Corporation, FrontGrade Technologies Inc., and DCX-Chol Enterprises, Inc., each using specific part numbers. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and must be complied with in full. Packaging and labeling must follow MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001, while cybersecurity compliance mandates a CMMC Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols based on MIL-STD-1916 or comparable zero-based plans. All government identification must be removed from non-accepted supplies, and physical markings must be applied per RQ017. Delivery is FOB origin with no variance allowed in quantity, and the required ship date is May 25, 2027. The unit of issue is each, and transportation logistics adhere to DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12CU
The contract pertains to the procurement of eight wiring harnesses with NSN 6150-01-568-9945 under solicitation SPE4A6-26-T-12CU, issued by the Defense Logistics Agency’s ASC Commodities Division. Deliveries are due within 171 days of award, and all supplies must comply with stringent quality, security, and export control requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring third-party assessment organization certification, and is governed by technical and quality requirements from the DLA Master List, including physical identification and bare item marking standards. No surplus material is acceptable, and government identification must be removed from rejected items. Components must originate from qualified manufacturers or products listed on official QPLs or QMLs as specified in procurement note H02. Technical data associated with the item is controlled under either ITAR or EAR regulations, and its export or disclosure to foreign persons—even within the U.S.—is strictly prohibited without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 applying. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval, may access the controlled technical data. The place of performance is Anniston, Alabama, and the point of contact is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-11QX
The contract pertains to the procurement of two Indicator Light Assemblies with NSN/Part Number 6210-00-551-3748, under solicitation SPE4A6-26-T-11QX, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, and the response deadline for submissions is August 12, 2026. The technical specifications and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as ISO 9001:2015 for quality management, along with specific protocols for inspection at origin, measuring and test equipment compliance, and removal of government identification from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and only U.S. contractors with approved JCP certification, completed DLA training, and formal authorization may access such data. DFARS 252.225-7048 applies to the handling of this controlled information, and additional requirements address covered defense information under RD002. The place of performance is Tracy, California, with Shenika Thompson as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details