Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUS, CONDUCTOR

Active
SPE4A6-26-T-14RTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two BUS, CONDUCTOR units with NSN 6150-01-577-6478, under solicitation SPE4A6-26-T-14RT, with a response deadline of August 18, 2026, and a required delivery within 20 days of award. This procurement is governed by multiple technical and compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2 certification for the third-party assessment organization, adherence to DLA packaging standards, and strict protocols for the removal of government identification from non-accepted supplies. The item involves technical data subject to export control under either ITAR or EAR, requiring explicit authorization prior to any export or disclosure to foreign persons, including foreign nationals within the United States, and DFARS 252.225-7048 applies to ensure compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DLA-mandated training on export-controlled technical data handling, and formal approval from DLA authorities. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The point of contact is Chinh Le at the ASC Commodities Division, Department of Defense, and performance is to occur at FPO, ZIP 96694.

General Info

Procure two BUS, CONDUCTOR units by August 18, 2026, deliver in 20 days, CMMC Level 2, ITAR/EAR controlled, DLA compliance required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

UNIT 100409 BOX 1, FPO, AP, 96694, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14RT DLA Aviation 2026-08-11

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHINH LE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUS,CONDUCTOR
BUS,CONDUCTOR
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-577-6478 Quantity: 2 EA Purchase Request: 7017747226QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5929
The contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-136-2648, quantity of seven units, under purchase request 7017775655. The item is classified as a commercial item, including commercial of a type, and no specific technical or quality data is provided directly in the contract; instead, all such requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. The revision of the Master List in effect on the solicitation issue date governs compliance unless an amendment supersedes it. The supplier must provide a complete data package for both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. Delivery is required within 164 days of delivery order issuance, with performance to occur at Cherry Point, North Carolina, 28533-5040. The solicitation, numbered SPE7M8-26-T-5929, was posted on August 10, 2026, with responses due by August 21, 2026. The North American Industry Classification System code is 334419, and the contracting agency is the Electrical Devices Division within the Department of Defense. The contract is a federal solicitation with no designated set-aside classification. Primary point of contact is Dondiego Boler, reachable via email at dondiego.boler@dla.mil or phone at 6146927047. Additional details and documents may be accessed through the DIBBS portal using the provided UI link.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
TAPE, SHIELDING, ELEC
Solicitation # SPE7M5-26-T-400T
The contract pertains to the procurement of electrical shielding tape, specifically identified by NSN 5999-01-655-1087 and part number 416T2211-4, with a requirement for one unit per line item, delivered FOB origin within 20 days. The item is designated as a critical application component for Boeing and is subject to stringent technical and quality controls, including compliance with MIL-STD-130 for Item Unique Identification (IUID) and MIL-STD-129 for marking. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016, and all packaging and preservation must conform to MIL-STD-2073-1E and DLA packaging standards, with specific preservation methods, wrap materials, and packaging codes defined. The item carries a Type 2 shelf life of 12 months, extendable, and requires FAA airworthiness approval. Sampling and inspection procedures follow MIL-STD-1916 or equivalent zero-defect acceptance criteria, with all unspecified attributes treated as major. Delivery must be made via traceable freight methods—parcel post is prohibited—with designated freight and parcel post addresses identified for two separate locations: Altus Air Force Base, Oklahoma, and McConnell Air Force Base, Kansas. The contract enforces strict configuration change management, requiring formal engineering change proposals for any deviations, and no quantity variance is permitted beyond zero percent. The original required delivery date is August 3, 2026, for the first line item and August 6, 2026, for the second. All technical requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contractor is obligated to adhere to all applicable clauses under DFARS 252.211-7003 and related DLA directives.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-14SH
The contract specifies the procurement of a cable assembly with NSN 6150016095688, issued under solicitation SPE4A6-26-T-14SH by the Department of Defense’s ASC Commodities Division. Four identical quantities of one unit each are ordered under separate CLINs, each destined for different U.S. Navy ships—USS Roosevelt, USS McCampbell, USS Chafee, and USS Bulkeley—with delivery required within 20 days of contract award to FOB destination. Strict packaging and handling protocols mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including preservation methods, unit container types, and palletization per DLA’s packaging requirements. The use of mercury or mercury compounds in any phase of preservation, packaging, or marking is strictly prohibited. All items must be inspected and accepted at the delivery point with zero tolerance for quantity variance. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. Shipping is coordinated through DLA’s vendor systems, with transportation instructions referencing specific DLA procedural notes. The required delivery dates range from August 4 to August 7, 2026, with a centralized point of contact provided for procurement inquiries.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M5-26-T-400M
The contract pertains to the procurement of a SWITCH, TOGGLE, identified by part number 407-43105 and NSN 5930-01-560-7497, with a quantity of 30 units at a unit price of $30.00, totaling $900.00. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, specifically referencing technical requirement IP025, which supersedes general commercial packaging standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement (RP001). If the item is deemed hazardous under FED-STD-313, it must be packaged in accordance with SPE7M5-26-T-400M; otherwise, commercial packaging per ASTM D3951 is acceptable, provided DLA standards take precedence. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery window is 111 days from the contract award, with a target ship date of December 11, 2026, and original delivery due by December 24, 2026. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, using the specified parcel post and freight shipping addresses. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE7M5-26-T-400M, with a response deadline of August 21, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5925
The contract pertains to the procurement of a sensitive switch, identified by NSN 5930-00-052-3260 and part number MS16106-3, with a strict requirement that no mercury or mercury-containing compounds be intentionally added or come into direct contact with the hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents designated by NAVSEA. Portable devices containing mercury must be shockproof and equipped with a secondary containment boundary in compliance with NAVSEA 5100-003D. Preservation, packaging, and marking must entirely exclude mercury and adhere to ASTM-D3951 commercial packaging standards, while packaging and labeling follow MIL-STD-2073-1E and MIL-STD-129 with no special marking codes. The item is classified as a critical application and must be sourced from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List, with technical design controlled under MIL-PRF-8805K and MIL-PRF-8805/3M specifications. Delivery is required within 164 days, with an original delivery date of July 1, 2027, and a need-by date of February 2, 2027, under FOB origin terms, with inspection and acceptance occurring at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the unit of issue is each. The contract calls for 118 units at a unit price of $118.00, totaling $13,924, under solicitation SPE7M8-26-T-5925, issued by the Department of Defense’s Electrical Devices Division with a response deadline of August 21, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6200
This contract is for the procurement of 52 push switches designated by NSN 5930009692683 and associated part numbers from DRS Naval Power Systems Inc and Eaton Corp, categorized as critical application items. The supplies must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lights, instruments, weapon systems, or specified reagents. Mercury-containing portable lamps and instruments must feature shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The items are subject to inspection and acceptance at the destination, with no tolerance for quantity variance. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-28786, with marking following MIL-STD-129 and no special marking required. Palletization shall conform to DLA packaging requirements, and hazardous materials handling must meet IP025 specifications. Delivery is FOB origin with a required delivery date of April 4, 2027, and a shipment deadline of February 26, 2027. All supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under the solicitation SPE7M2-26-T-6200, which was issued on August 10, 2026, with responses due by August 21, 2026. The unit of issue is each (EA), at a fixed price of $52.00 per unit.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FILTER, BAND PASS
Solicitation # SPE7M5-26-Q-0817
A band pass filter with NSN 5915-01-025-5052 is being solicited under contract SPE7M5-26-Q-0817 by the Defense Logistics Agency under the Department of Defense. The requirement calls for 13 units and was posted on August 10, 2026, with responses due by August 19, 2026. The solicitation is open to federal entities with no specific set-aside classification indicated. The place of performance and point of contact details are not provided, and delivery is expected within the United States. Bidders must submit proposals through the official DIBBS portal using the provided UI link to ensure proper consideration.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-Q-0838
This contract pertains to the procurement of 54 units of a radio frequency filter identified by NSN 5915-01-725-3943, with a delivery requirement 425 days after the award date. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 for marking and labeling; hazardous materials must be packaged per TQ requirement IP025 while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Palletization must follow DLA guidelines, and the unit of issue is each (EA) with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The item is to be delivered to the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7M5-26-Q-0838 with a response deadline of August 20, 2026, and a posted date of August 10, 2026. The requesting activity is the Department of Defense, and the point of contact is Jeffrey Heck. The material need date is January 19, 2026, and the procurement falls under NAICS code 334419. All packaging must include the specified QUP and comply with DLA’s unit of issue standards, and government identification must be removed from any non-accepted supplies in accordance with RQ011.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-5927
The contract is for the procurement of three rotary switches with NSN 5930-01-086-9167 under solicitation SPE7M8-26-T-5927, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 164 days from award, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and is classified under NAICS code 334419 for other electrical equipment and component manufacturing. Packaging and technical specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The alternate offeror must provide a complete data package including full documentation for both the approved and alternate parts. Government identification must be removed from any non-accepted supplies. Primary point of contact is Dondiego Boler, reachable via email and phone provided, with additional details accessible through the DIBBS portal.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-Q-0840
The contract pertains to the procurement of 60 units of a Radio Frequency Filter with NSN 5915-01-721-6658 and part number RF14034-2A from EMS Development Corporation, issued under solicitation SPE7M5-26-Q-0840. Delivery is required 382 days after award of contract, with FOB origin and inspection and acceptance both occurring at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any general commercial standards. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 for marking and labeling, and must follow RP001 for palletization; if the material is non-hazardous per FED-STD-313, it must be packaged per ASTM D3951, but DLA requirements take precedence. Hazardous materials require compliance with TQ requirement IP025. The Unit of Issue is each (EA), with no variance permitted in quantity. All packaging and shipping must meet DLA’s procedural standards, with delivery directed to the DLA Distribution facility at New Cumberland, Pennsylvania. The contract is governed by DLA systems and procedures, including transportation rules specified in DLAD Proc Note C19 and C20, and the purchase request number is 7015892854. The contract was posted August 10, 2026, with responses due August 25, 2026, and the material is needed for shipment no later than June 8, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M5-26-T-400G
This contract specifies the procurement of six crystal oscillators under Solicitation SPE7M5-26-T-400G, with a delivery window of 478 days after contract award. The item is identified by NSN 0001S00000052 and falls under a total small business set-aside, targeting manufacturers classified under NAICS code 334419. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation issue date. The contract imposes stringent quality controls including tailored higher-level requirements, configuration change management, and inspection and acceptance at the manufacturer’s origin. All supplies must adhere to DLA packaging standards and require removal of government identification from non-accepted items. Export control is strictly enforced due to the presence of technical data subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization may access this controlled data. Cybersecurity compliance mandates CMMC Level 2 certification from a certified third-party assessment organization, and covered defense information protocols apply. Performance is designated at Robins Air Force Base, Georgia, with the point of contact being Jeremy Etringer of the Department of Defense’s Active Devices Division. The solicitation was posted August 10, 2026, with responses due by August 21, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-U-3316
The contract is for the procurement of 239 units of a special-purpose electrical cable assembly, identified by NSN 6150-01-513-3345, under solicitation SPE4A6-26-U-3316, which is a total small business set-aside under NAICS code 334419. Delivery is required within 242 days after award, with the solicitation issued on August 10, 2026, and responses due by August 25, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, using zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs—VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor—with unspecified features treated as major. Physical identification and marking of items must comply with RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. Packaging must adhere to DLA standards and export control regulations for technical data under ITAR or EAR, prohibiting any disclosure to foreign persons without authorization. Only contractors with an approved US/Canada Joint Certification Program status, completed export control training, and DLA approval may handle the controlled data, with DFARS 252.225-7048 applicable. Additionally, the vendor must be a CMMC Level 2 certified C3PAO, ensuring compliance with cybersecurity maturity standards tied to the performance of this contract.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-14SY
This contract specifies the procurement of a single power cable assembly with part number 024314-000 and NSN 6150017031861, supplied by SAFT AMERICA INC. and SATAIR USA INC. The item is designated as a critical application component and must comply with stringent quality and technical requirements referenced in PROC NOTE L32 and the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. The product must meet FAA airworthiness standards for commercial derivative aircraft parts, and while unique identification is not required per customer request, all marking, packaging, and preservation must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA-specific packaging directives including RP001 and RP003. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Configuration changes require formal engineering change proposals and deviations must be formally requested. The cable assembly is to be delivered FOB origin in a single unit within 288 days after contract award, with delivery directed to Robins Air Force Base, Georgia, under strict DLA shipping and marking protocols. The contract imposes a zero variance in quantity, requires destination inspection and acceptance, and mandates compliance with all federal aviation and defense logistics standards governing procurement, preservation, and documentation.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
NAIL
Solicitation # SPE4A6-26-T-14SZ
The contract specifies the procurement of 4 pounds of nails identified by NSN 5315-00-616-0359 under solicitation SPE4A6-26-T-14SZ, with a required delivery date of August 4, 2026, and a 20-day delivery window. The product must conform to ASTM F1667-05 and be packaged in accordance with ASTM D3951, subject to the higher precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must follow DLA’s RP001 packaging standards. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned specific verification levels or AQLs. Inspection and acceptance occur at the destination, and the item must be shipped via traceable freight, explicitly prohibiting parcel post. The delivery destination is Cannon AFB, New Mexico, with a unit price of $4.00 per pound, zero variance allowed in quantity, and FOB origin terms. The contract mandates compliance with all federal procurement standards and includes specific identification and tracking requirements, including a government-use-only code and designated point of contact for inquiries.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-14SW
The contract pertains to the procurement of three straight headless pins with part number 5315012138959 under solicitation SPE4A6-26-T-14SW, issued by the DLA Commodities Division of the Department of Defense for delivery to the Government of Israel, Ministry of Defense. The items must comply with DLA packaging requirements as defined in RP001 and technical quality standards referenced through R numbers from the DLA Master List, with sampling methods governed by MIL-STD-1916 or ASQ Z1.4 using zero-defect acceptance unless otherwise stated. Critical attributes require verification at Level VII or an AQL of 0.1, while unspecified attributes are treated as major. The pins are designated as a critical application item for Hamilton Sundstrand Corporation, and all packaging must conform to MIL-STD-2073-1E with packing code Q and level B, marking per MIL-STD-129 with no special marking requirements. Delivery is FOB origin within 20 days, with no variance allowed in quantity and inspection and acceptance occurring at origin. The unit of issue is each, with a total price of $3.00 per unit. The shipment is to be handled by G&B Packing Company and directed to the specified Israeli Ministry of Defense address under project 533 TP 2, with required delivery set for July 21, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-14SF
The contract pertains to the procurement of two set screws identified by NSN 5305-01-533-7412, with a purchase request number 7017761043, at a unit price of $2.00 for a total value of $4.00. Delivery is required within ten days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all technical and quality standards from the DLA Master List of Technical and Quality Requirements supersede any conflicting provisions. The set screws must be physically marked per MIL-STD-130N, 16 Nov 2012, with the manufacturer identified as Premier Reticles Ltd, Winchester, VA, and the part number PR561-41. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor distinctions. The shipment is to be sent via traceable freight to the 2nd Marine Raider Support Battalion at Camp Lejeune, NC, and parcel post is strictly prohibited. The requirement is sourced under solicitation SPE4A6-26-T-14SF, with the original delivery date set for August 4, 2026, and the solicitation was posted on August 10, 2026, with responses due by August 18, 2026. The primary point of contact is Alexander Sotos of the ASC Commodities Division, Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-14SL
The contract pertains to the procurement of 111 machine bolts with NSN 5306-00-207-2490 under solicitation SPE4A6-26-T-14SL, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 135 days of award, and the solicitation was posted on August 10, 2026, with responses due by August 18, 2026. The item is classified under NAICS code 332721 and performance is designated for New Cumberland, Pennsylvania, 17070-5002. The contract incorporates mandatory DLA packaging and quality conformance requirements, including the Certificate of Quality Compliance (COQC), which must be furnished in hard copy for each manufacturing lot and electronically uploaded to the iRAPT system as an attachment to the Receiving Report. Each COQC must adhere to the Supplemental Quality Assurance Provision and be available for review by Government inspectors at source if applicable. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The supplier must ensure all Government identification is removed from non-accepted supplies and that all documentation is accurate, complete, and timely submitted. The cost of fulfilling these data and compliance requirements is included in the item’s price. Point of contact for the contract is Jeremy Stokes, and additional details can be accessed via the provided DIBBS portal link. The contract emphasizes strict adherence to quality documentation standards and electronic submission protocols to ensure traceability and compliance throughout the delivery and acceptance process.
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-14SN
The contract pertains to the procurement of 1,054 plain hexagon nuts with NSN 5310-01-190-1724 and part number 021-11609, supplied by BORG-WARNER CORP YORK DIV. Delivery is required within 29 days of award, under solicitation SPE4A6-26-T-14SN, which is a Total Small Business Set-Aside with NAICS code 332722. The solicitation was posted on August 10, 2026, with responses due by August 18, 2026, and performance will occur in Tracy, California, 95304-5000. The contract incorporates mandatory technical and quality requirements from the DLA Master List, including physical identification and bare item marking standards, packaging protocols per DLA guidelines, and source approval documentation provisions. Government identification must be removed from non-accepted supplies. A strict prohibition against the intentional addition of mercury or mercury-containing compounds applies to all furnished hardware, with exceptions limited to functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shock-proof and equipped with a secondary containment boundary, in compliance with NAVSEA 5100-003D. Contact for inquiries is Sibel Claywell, primary point of contact at the ASC Commodities Division, Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335132
New
DIBBS
FILTER, LIGHT, UTILIT
Solicitation # SPE4A6-26-T-14RR
This contract pertains to the procurement of five units of a general-purpose light filter identified by NSN 6230015402347, with a delivery requirement of 107 days from the contract award, to be shipped FOB origin under strict packaging and marking guidelines. The items must comply with MIL-STD-2073-1E for preservation and packaging, including specific codes for method, material, and container type, and must be marked per MIL-STD-129 with a fragile designation. All packaging and preservation materials are prohibited from containing mercury or mercury compounds, and the filters themselves must not contain intentional mercury additions except as permitted under narrow exceptions for functional uses in certain instruments or lighting, which must include a secondary containment system per NAVSEA 5100-003D. Sampling and inspection follow zero-defect criteria under MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major and acceptance requiring zero non-conformances in the sample lot. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with identical shipping and parcel post addresses, and the contract enforces a strict zero variance in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The contract was issued under solicitation SPE4A6-26-T-14RR, with a response deadline in August 2026 and a required delivery date of December 4, 2026.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-14SX
The contract pertains to the procurement of 11 close tolerance bolts, identified by NSN 5306-00-596-7420, under solicitation SPE4A6-26-T-14SX, with a delivery deadline of 159 days after award. The item is classified as a commercial item and must comply with a suite of technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R-numbered clauses. These include DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Item Unique Identification is waived per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exclusion. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise defined. MIL-STD-105/ASQ Z1.4 may determine sample size, but acceptance requires zero non-conformances unless the contract specifies otherwise. Measuring and test equipment must meet applicable standards. The place of performance is Tinker AFB, Oklahoma, with Priscilla Holmes as the primary point of contact. The procurement is fully competitive under a military specification and falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14SR
This contract pertains to the procurement of PIN-RIVET items with part number HST13W5-5 and NSN 5320017140189, requiring a quantity of six units delivered FOB origin within 98 days from the contract date, with no tolerance for quantity variance. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific packaging requirements per MIL-STD-2073-1E and marking in accordance with MIL-STD-129. The product is classified as a critical application item, and sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes assigned verification levels or AQLs based on criticality. Packaging must adhere to DLA’s RP001 guidelines, palletization standards, and include prescribed internal and external container details, with no special marking required beyond standard identification. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes. The contract is issued under solicitation SPE4A6-26-T-14SR, with a required delivery date of September 7, 2026, and the unit of issue is each. The contracting office is under the Department of Defense’s ASC Commodities Division, and inquiries should be directed to Ericka Mosley.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
HEADLIGHT
Solicitation # SPE4A6-26-T-14RU
This contract pertains to the procurement of a single headlight unit, identified by NSN 6220017223176 and part number 628-6039, supplied by John Bean Technologies Corp or Oshkosh Aerotech, LLC. The item is classified as a critical application item with no shelf life requirement, and unique identification is not mandated per the service customer’s request under DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required for acceptance unless contract exceptions apply. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including labeling per MIL-STD-129 with a fragile marking code and proper palletization. Delivery is due within 20 days FOB origin to the Navy Expeditionary Logistics Support Group in Williamsburg, VA, with no quantity variance permitted. The item must be shipped via fastest traceable means—parcel post is prohibited. Inspection and acceptance occur at the destination, with the original required delivery date set for May 22, 2026. The contract is issued under SPE4A6-26-T-14RU and incorporates all referenced technical and quality requirements from the DLA Master List, including documentation, marking, and packaging standards.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14ST
The contract pertains to the procurement of 20 units of PIN-RIVET with NSN 5320-01-716-3258 under solicitation SPE4A6-26-T-14ST, with a delivery requirement of 98 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked as per RQ017, and sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains export-controlled technical data subject to ITAR or EAR regulations, requiring prior authorization for any foreign disclosure, including to foreign nationals in the U.S., and is restricted to contractors with JCP certification, completed DOD export training, and DLA approval. Configuration changes require formal engineering change proposals, and the contract incorporates DFARS 252.225-7048 for export control. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and covered defense information provisions apply. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance located in Cherry Point, NC, and primary point of contact is Ahoefa Simons De Fanti.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details