Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, MACHINE THREAD

Active
SPE4A7-26-T-724EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of 698 machine thread bushings identified by NSN 5365-01-270-7546. The contract requires delivery within 128 days after order and is categorized as a commercial item under NAICS code 332510. Performance is centered in Texarkana, Texas, with the primary point of contact being Jamiah Sutton. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging and marking standards. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.

General Info

DoD procurement of 698 machine thread bushings for delivery in Texarkana, Texas.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-724E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,MACHINE THREAD
BUSHING,MACHINE THREAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-270-7546 Quantity: 698 EA Purchase Request: 7018248570QTY: 698 Delivery: 128 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-724K
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of 793 plate spacers under NSN 5365-01-333-9929. The contract requires delivery within 171 days after receipt of order and falls under NAICS code 332510. Performance is designated for New Cumberland, Pennsylvania. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires. Additionally, all shipments must comply with DLA packaging requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A7-26-T-722F
This solicitation is for the procurement of 271 retaining rings under NSN 5325-00-551-6040. The contract identifies Honeywell International Inc as the primary source for part number 59676, with Kitco Inc listed as an acceptable alternative source. This is classified as a commercial item requiring critical item source inspection and adherence to DLA packaging requirements and quality standards. The delivery timeline is set for 138 days after receipt of order. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The procurement is managed by the Department of Defense ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MENDING
Solicitation # SPE7L1-26-T-08N9
This contract is for the procurement of one mending plate, identified by NSN 5340017255661 and part number 4730-010-573 from Advanced Technology and Research. The item is designated as a critical application item and must be delivered FOB Origin to Port Hueneme, California, within 20 days. The required delivery date is set for September 3, 2026, and the contract specifies a zero percent quantity variance. The supplier must adhere to DLA master lists for technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. A strict prohibition is placed on the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and RP001, with specific instructions to use the fastest traceable means for shipping rather than parcel post. Inspection and acceptance will take place at the destination.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-08S4
This solicitation, issued by the Department of Defense Land Supply Chain for a cushioning pad under NSN 5340-01-707-6503, requires the delivery of one unit within 10 days after the order is received. The contract is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating packaging standards and the removal of government identification from non-accepted supplies. A strict prohibition is placed on the use of Class I ozone-depleting chemicals, requiring approved substitutes if necessary. The agreement includes stringent security and compliance mandates, including the protection of covered defense information and adherence to ITAR and EAR export controls. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training. Quality assurance is managed through authorized certificate of conformance procedures unless otherwise specified by a quality assurance letter of instruction.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-641A
This contract is for the procurement of five shims, identified by NSN 5365011910761 and part number 20435-1140 from Sargent Controls and Aerospace. The order is designated as a critical application item and requires strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Delivery is set for 171 days after the order, with a required delivery date of May 19, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific NAVSEA standards. All technical and quality requirements are integrated via the DLA Master List, and the contract specifies a zero percent quantity variance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIN, HOLLOW
Solicitation # SPE4A0-26-T-4535
This solicitation is for the procurement of two hollow pins, identified by NSN 5315-00-098-6736, for the Department of Defense Aviation Supply Chain. The contract requires adherence to specific technical standards, including ASTM A513 or A519, MIL-DTL-16232, and MIL-PRF-3150. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots unless otherwise specified. Delivery is required within five days after the order is placed. The contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training. All packaging and quality requirements are governed by the DLA Master List of Technical and Quality Requirements.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-723H
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Div, is for the procurement of 24 machine thread bushings and sleeve bearings under NSN 5365-01-070-2243. The contract requires delivery within 171 days after receipt of order, with the place of performance located in Bremerton, Washington. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific mandates for packaging, physical identification, and inspection at origin. Notably, this contract involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE7M4-26-T-384N
This contract is for the procurement of 510 packages of Safety Cable Kits, identified by NSN 5340014520343 and part number C10-318PKG from Daniels Manufacturing Corporation. The order is designated as a critical application item and is a total small business set-aside under NAICS code 332510. Delivery is required within 49 days, with a need ship date of November 10, 2026, and a final required delivery date of December 17, 2026. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. Compliance with DLA Master List technical and quality requirements is mandatory, specifically regarding packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to MIL-STD-129 and ASTM D3951, with specific instructions for hazardous materials if applicable. Inspection and acceptance will take place at the destination.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L3-26-U-0715
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L3-26-U-0715 for the procurement of 52 units of webbing straps, identified by NSN 5340-01-649-2493. This federal requirement is tracked under purchase request 1000240638 and was officially posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 8, 2026. Further details and submission instructions are available through the DIBBS portal via the provided solicitation link.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-27TH
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-27TH, is for the procurement of 630 blind rivets identified by NSN 5320-01-460-3828. The contract requires delivery within 171 days after the order is placed, with the place of performance located at Tinker AFB. The response deadline for this federal requirement is September 17, 2026. The procurement is subject to several technical and quality requirements as defined by the DLA Master List. Key compliance mandates include specific documentation for source approval requests, adherence to DLA packaging requirements, the removal of government identification from non-accepted supplies, and strict physical identification and bare item marking standards. Primary contact for this solicitation is Susan Barlow.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-27SZ
This solicitation is for the procurement of 14,576 threaded pin-rivets under NSN 5320-01-338-5738. Issued by the Department of Defense ASC Commodities Division, the contract is a total small business set-aside under NAICS code 332510. The delivery requirement is set for 207 days after order, with the place of performance located at Tinker AFB. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and rules regarding government identification and item marking. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned to critical, major, and minor attributes. Additionally, the supplier must provide necessary documentation for the Source Approval Request process.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-02U8
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of three detent plungers identified by NSN/Part Number 5340-01-487-6900. The request is tracked under purchase request 7016886565 and falls under NAICS code 339994. The solicitation, numbered SPE7L1-26-T-02U8, was posted on August 25, 2026, with a response deadline of September 8, 2026. Interested parties should direct inquiries to the buyer via the provided DIBBS email contact or the official solicitation portal.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A7-26-T-722E
This contract is for the procurement of 75 close tolerance bolts under solicitation SPE4A7-26-T-722E for the Department of Defense. The items are designated as critical application items and must adhere to specific technical data packages and reference drawings. Delivery is required within 171 days after order, with a required delivery date of January 14, 2027, shipping FOB Origin to DLA Distribution Warner Robins in Georgia. Quality assurance is stringent, requiring inspection and acceptance at the origin. Sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must follow ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract incorporates various technical and quality requirements from the DLA Master List, including protocols for configuration change management and physical identification.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A7-26-T-726U
This contract is a solicitation for the procurement of one machine bolt, identified by NSN 5306014790338 and Kubota Tractor Corp part number 01153-50828. The order is issued by the Department of Defense under solicitation number SPE4A7-26-T-726U, with a required delivery date of September 3, 2026. Delivery is set for five days after order, with shipping handled FOB Origin and the final destination being the Letterkenny Army Depot in Chambersburg, Pennsylvania. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards RP001 and marking guidelines per MIL-STD-129. Specific packaging instructions include MIL-STD-2073-1E and the use of the fastest traceable shipping means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination point.
Nonferrous Forging

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A7-26-T-722W
This contract is for the procurement of 648 screw thread inserts, identified by NSN 5325007839139 and part number MS51830-204L. The items must be manufactured according to the current revision of the applicable part standard, specifically MS51830G. This is designated as a critical application item, requiring critical item source inspection and adherence to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. The delivery is set for 171 days after the order, with a required delivery date of April 18, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the use of mercury or mercury-containing compounds is strictly prohibited in the hardware, preservation, and packaging.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUAL BREAKAWAY, AUX
Solicitation # SPE4A7-26-T-725N
This contract is a Women-Owned Small Business Set-Aside solicitation issued by the Department of Defense for the procurement of six units of a 1-1/2 inch Dual Breakaway, Aux component, identified by NSN 1680-01-587-6928 and part number 21901-939. The delivery is required within 171 days after the order, with a need ship date of March 8, 2027, and a final delivery destination at the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to technical and quality standards, including MIL-STD-130 for Item Unique Identification and CMMC Level 2 self-assessment for cybersecurity. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. The item is designated as a critical application item, and the contract incorporates the DLA Master List of Technical and Quality Requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A7-26-T-723X
This solicitation is for the procurement of 126 eye bolts under part number 5306-01-206-3141 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contract requires delivery within 171 days after the order date and specifies performance in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, with a focus on zero-based sampling plans for acceptance. Additionally, the contract requires compliance with regulations regarding physical item marking, the removal of government identification from non-accepted supplies, and the provision of documentation for source approval requests.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A7-26-T-727F
This contract is for the procurement of 537 retaining rings, identified by NSN 5325-00-804-7639 and part number MS16624-4027. The items must adhere to the technical specifications of MS16624E and are designated as critical application items. Delivery is required within 171 days, with a required delivery date of March 17, 2027, shipping FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Quality assurance is governed by strict sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the use of mercury or mercury-containing compounds is strictly prohibited in the hardware and packaging. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A7-26-T-726Q
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of four headless grooved pins under NSN 5315-01-669-8148. The contract requires delivery within 171 days after receipt of order and is categorized under NAICS code 332618. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality standards as defined by the DLA Master List, including specific packaging requirements and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and is subject to ITAR and EAR export controls. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed Department of Defense export-control training.
Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RING, SPRING, LANDING
Solicitation # SPE4A7-26-T-722U
This contract is for the procurement of nine landing spring rings, identified by NSN 1620010134933 and part number 8437-1 from CEF Industries, LLC. The agreement is a total small business set-aside under the Department of Defense, specifically the ASC Supplier OE and AF Division. Delivery is required within 171 days, with a need ship date of March 8, 2027, and a final delivery date of March 22, 2027. The items are to be delivered FOB Origin and will be accepted and inspected at the destination, the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformance required for acceptance. Additionally, the supplier must comply with cybersecurity and data protection standards, including CMMC Level 2 self-assessment and Covered Defense Information requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS