Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BUSHING, NONMETALLIC

Active
SPE4A7-26-T-580HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 215 nonmetallic bushings with NSN 5365-01-624-6947 under solicitation SPE4A7-26-T-580H, with a response deadline of July 27, 2026, and a delivery requirement of 169 days after order. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers, inspection and acceptance at origin, and strict protocols for removing government identification from non-accepted supplies. Physical identification and bare item marking must comply with specified standards, and the technical data associated with the bushing is controlled under export regulations, either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, including those located within the United States. Access to this data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training on handling export-controlled technical data and received formal approval from DLA. Packaging must adhere to DLA procurement standards, and cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors involved in the supply chain. The place of performance is specified as New Cumberland, PA, 17070-5002, and the primary point of contact is Jamiah Sutton of the Department of Defense, ASC Supplier Operations AE and AF Division.

General Info

Procure 215 nonmetallic bushings, NSN 5365-01-624-6947, by July 27, 2026, with CMMC Level 2, ITAR/EAR controls, and DLA quality standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-580H DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,NONMETALLIC
BUSHING, NONMETALLIC
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-624-6947 Quantity: 215 EA Purchase Request: 7017536490QTY: 215 Delivery: 169 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
Fabrication and Supply of Sleeve BushingsThe contract seeks the manufacture and delivery of 100 precision sleeve bushings to meet stringent military quality and packaging requirements, ensuring full compliance with defense sector standards. The work is classified as a subcontract under NAICS code 332119, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, leaving a limited window for interested parties to submit proposals. The contracting entity is the ASC Supplier Oper AE and AF Division under the Department of Defense, indicating the critical nature of the components for defense systems. All delivered items must adhere to strict military specifications for dimensional accuracy, material integrity, and packaging to withstand transport and storage in operational environments.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
Precision Sleeve Bushing SupplyThe contract seeks the manufacture and delivery of one precision sleeve bushing per military drawing NR 53711 8840300, Revision H, with full compliance to Defense Logistics Agency requirements, applicable Military Standards, and hazardous materials regulations. The component must meet exacting technical specifications outlined in the drawing and adhere to all quality, safety, and environmental standards mandated by federal defense procurement protocols. The work is classified as a subcontract under NAICS code 332119, indicating it falls within the Other Metal Valve and Pipe Fitting Manufacturing category, and the place of performance is designated as Mechanicsburg, Pennsylvania, with a zip code of 17050-2411. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, giving potential suppliers a limited window to submit proposals. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the official link for the request for quotation is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to any qualified contractor regardless of business size or socio-economic status. All submissions must be responsive to the drawing and regulatory standards to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of 100 units of a BUSHING, SLEEVE with NSN 5365-01-658-7233 under solicitation SPE4A7-26-T-580J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The delivery is scheduled for 169 days after award, with a response deadline of July 27, 2026, and the place of performance is designated as New Cumberland, PA, 17070-5002. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer, including to foreign nationals within the United States. The Defense Logistics Agency restricts access to this controlled data exclusively to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory training and questionnaire requirements and received explicit approval from DLA. Contracting personnel must comply with DFARS 252.225-7048 regarding the handling of export-controlled technical data, and only qualified entities authorized by DLA may access or handle the associated information. The contract is classified as a federal solicitation with no set-aside designation, and the NAICS code 332119 indicates it falls under other fabricated metal product manufacturing. Primary point of contact for inquiries is Brandon Smith, reachable via email or phone as listed, with additional details accessible through the DIBBS portal. All parties must ensure strict adherence to export compliance protocols throughout the lifecycle of this procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of SPACER, SLEEVE items under solicitation SPE4A7-26-T-580R, specifying a quantity of 36 units with a unit price of $36.00 and a total contract value of $1,296.00. Delivery is required FOB origin within 85 days, with zero variance allowed in quantity, and inspection and acceptance are to occur at the origin. The item is identified by NSN 5365-01-643-4773 and must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and unit containment protocols. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 standards. The technical specifications are governed by referenced drawings and technical data packages, with quality assurance requirements aligned with MIL-STD-1916 or ASQ H1331, mandating zero non-conformances in sampling unless otherwise stated, and assigning verification levels based on attribute criticality. The material has no shelf-life requirement, and government identification must be removed from any non-accepted supplies per RQ011. The contract references DLA’s Master List of Technical and Quality Requirements for all incorporated R and I numbers, and revision control is tied to the solicitation or award date depending on acquisition size. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation instructions governed by DLAD Proc Note C19 and C20. The need ship date is May 17, 2026, with an original required delivery date of July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract is for one bushing, sleeve with part number 342-8840300-24 and NSN 5365017184315, issued under solicitation SPE4A7-26-T-581Z. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based acceptance plan unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics, with unspecified attributes treated as major. The item must conform to TDP Rev B Gen 2 per basic drawing NR 53711 8840300 revision H dated 09/19/2025, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA packaging guidelines and traceable shipping methods are mandatory; parcel post is prohibited. Delivery is FOB origin with a strict 20-day lead time to be completed by June 12, 2026, and inspection and acceptance occur at destination with zero variance permitted in quantity. The delivery address is the Naval Supply Systems Command warehouse in Mechanicsburg, Pennsylvania, and the contract is managed by the Department of Defense under ASC Supplier Operations AE and AF Division with Hannah Leonard as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe item is a bushing sleeve with NSN 5365-01-625-3773, ordered in a quantity of 99 units under purchase request 7017536491, with a delivery schedule of 169 days after order. The contract is issued under solicitation SPE4A7-26-T-580K, posted on July 19, 2026, with responses due by July 27, 2026, and falls under NAICS code 332119. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Erica Adams at erica.adams@dla.mil is the primary point of contact. Technical data associated with this item is subject to export control under either ITAR or EAR, and its dissemination to foreign persons, whether inside or outside the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data. Only DLA contractors holding a valid US/Canada Joint Certification Program certification, who have completed the required DOD export control training and questionnaire, and have received formal approval from the DLA controlling authority may access this technical information. Packaging must comply with DLA requirements, and all handling procedures must strictly adhere to export control regulations applicable to U.S. companies and their foreign subsidiaries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe item specified is a spacer plate with NSN 5365-01-696-8438, requiring one unit to be delivered within 20 days after order. This procurement is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Department of Commerce. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training and the DLA questionnaire, and receive explicit approval from DLA to handle the controlled data, with DFARS 252.225-7048 fully applicable. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation, issued by the ASC Commodities Division under the Department of Defense, has a response deadline of July 27, 2026, and the place of performance is designated as Mechanicsburg, PA, 17050-2411. Point of contact is Emma Garrett, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of one retaining ring, designated as a commercial off-the-shelf item with part number 25489 and NSN 5325-01-691-1724, supplied by TULSA WINCH, INC. The total contract value is $1.00, with a delivery requirement of five days after receipt of order, and the item must be delivered FOB origin to Fort Stewart, Georgia. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods using cling/dry technique, and marking must strictly adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 packaging requirements, and the shipment must use traceable freight methods, explicitly excluding parcel post. Inspection and acceptance occur at the destination point, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, applying zero non-conformances unless otherwise stipulated, and attribute classifications tied to specified verification levels or AQLs. The item is subject to all applicable technical and quality requirements from the DLA Master List, referenced by R and I numbers, and must be accompanied by compliance with hazardous materials labeling under 29 CFR 1910.1200 and DFARS clause 252.223-7001, which mandates prior submission of hazard labels and safety data sheets for non-exempt materials. The contractor is bound by multiple FAR and DFARS clauses addressing cybersecurity, prohibitions on covered telecommunications equipment, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, and electronic invoicing via WAWF. Additionally, the contractor must maintain current SAM.gov registration, provide UEI and CAGE code where applicable, and affirm socioeconomic status for potential small business preferences. The contract is awarded without specified type, but the structure and terms suggest an LPTA basis. All documentation and compliance obligations must be met, with no allowances for deviations unless formally authorized, and failure to comply with any clause, especially those concerning hazardous substances or prohibited equipment, may result in rejection or contract termination.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract specifies the procurement of 100 units of a spacer sleeve identified by NSN 5365-01-653-6539 and part number NAS42HT4A-46, manufactured in compliance with NAS42 Revision 11. All items must meet stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Critical application status requires adherence to strict verification levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes. Packaging must conform to MIL-STD-2073-1E with preservation methods including preservative coating, dry storage, and no cushioning, while marking follows MIL-STD-129 with no special markings required. Palletization complies with DLA packaging standards, and the shipment must be transported via traceable means, excluding parcel post. Delivery is required at origin within five days of contract award, with no tolerance for quantity variance. The consignee and shipping address is the Central Receive and Ship Point at Fort Rucker, Alabama, with the same location designated as the markfor point. The required delivery date is June 15, 2026, with no need ship date specified. Inspection and acceptance occur at origin, and the contract is issued under solicitation SPE4A6-26-T-07SP with a total price of $100.00 for the lot. The item is classified for federal use, with procurement managed by the DLA Commodities Division, and all references to unit of issue align with ANSI X12 standards. Final documentation must reflect the DLA-mandated tracking codes, project codes, and government-used identifiers including IPD and DIC codes.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
WINDOW, DIALThe contract involves the procurement of six WINDOW DIAL units under NSN 5355-01-654-5859, with a delivery requirement within 31 days of award. The solicitation number is SPE7L5-26-T-4310, issued on July 17, 2026, with responses due by July 22, 2026, and is managed by the Department of Defense under the Land Supplier Ops Engines organization. The place of performance is identified as New Cumberland, Pennsylvania with a zip code of 17070-5002, and the primary point of contact is Paul Doerfler, reachable via email and phone. This procurement operates under the DLA Packaging Requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are accessible online; the applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The NAICS code is 332119 and the acquisition type is federal, with no set-aside designation. The contract mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
Federal
PLUG,MACHINE THREADThis contract pertains to the procurement of a machine thread plug designated as SPECIAL EMPHASIS material (Level I), critical to a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must be manufactured strictly in accordance with Naval Sea Systems Command drawing 6758076 and associated liability ER2643-820-23C4, with material specified as ASTM-B139, UNS C51000, Temper H04. All materials require full traceability from raw stock to finished component, with mandatory heat-lot or traceability markings permanently affixed in compliance with MIL-STD-792, and must be accompanied by certified chemical and mechanical test reports that meet exacting standards. Electronic submission of Objective Quality Evidence (OQE), including certifications and test data, is required via the Wide Area WorkFlow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286 for shipping, inspection, and acceptance, with a mandatory notification email to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is granted. The contract mandates a comprehensive quality assurance program requiring ISO-9001 with ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025 compliance, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, with all processes subject to government inspection at source. Welding and brazing must follow S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with prior submission and approval of weld procedures and qualification data. All weld filler metals require certification of LOT numbers and conformity to specification, and electronic signatures on documentation are permitted with strict controls to ensure authenticity and prevent tampering. Final inspection demands 100% verification of traceability, certification legibility, and compliance with zero defect acceptance criteria, with sampling guided by ANSI/ASQ Z1.4 unless otherwise specified. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and subject to a one-year warranty from date of delivery. The contract also enforces Buy American Act compliance, mercury-free requirements, and strict configuration control, requiring Engineering Change Proposals for any modifications impacting form,
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 332119
New
DIBBS
Precision Spacer Sleeve SupplyThe contract requires the manufacture or supply of 16 precision spacer sleeves identified by NSN 5365017364566, engineered to meet exact federal specifications for form, fit, and function, ensuring seamless integration into military systems. Full compliance documentation must be provided to verify adherence to all technical and quality standards, with no deviations permitted. The work is classified as a subcontract under NAICS code 332119, indicating it falls within miscellaneous fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is designated for New Cumberland, Pennsylvania, with the zip code 17070-5002 as the sole place of delivery or execution. All bids must be submitted by the response deadline of July 24, 2026, with the solicitation posted on July 16, 2026, allowing potential suppliers a precise eight-day window to prepare and respond. The contract does not specify a set-aside type, meaning it is open to all qualified vendors regardless of business size or ownership status. There is no designated point of contact listed, and the official solicitation details can be accessed via the provided DIBBS link, which serves as the authoritative source for submission instructions and technical requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 531020
New
DIBBS
Packaging, Marking, and Logistics (MIL-STD-129 & MIL-STD-2073-1E Compliance)The contract requires full compliance with military packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, ensuring all items are properly enclosed, protected, and labeled for defense logistics. Each package must include NSN labeling, the contractor’s CAGE code, lot traceability information, and be prepared for direct delivery to a designated U.S. government facility under FOB destination terms. The work is subcontracted as a total small business set-aside under NAICS code 531020, restricted exclusively to small businesses as defined by SBA regulations. The solicitation was posted on July 20, 2026, with proposals due by July 31, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, though specific performance location and contact details are not provided.

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332812
New
DIBBS
Specialty Coating and Surface Treatment (QQ-C-533 Compliance)This contract requires the application of chemical conversion coatings in accordance with QQ-C-533 specifications to copper alloy washers, ensuring enhanced corrosion resistance and maintained electrical conductivity for military-grade components. The work demands strict adherence to documented processes and full traceability throughout production to meet federal defense compliance standards, with all steps thoroughly recorded to support quality assurance and audit readiness. The coating process must consistently deliver performance characteristics aligned with military requirements, and all materials, procedures, and inspections must be verifiable from start to finish. The contract is structured as a small business set-aside under the SBA program, designated for total small business participation, and falls under NAICS code 332812 for metal coating, engraving, and related services. It is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 31, 2026, and was posted on July 20, 2026. While no specific point of contact or place of performance is listed, bidders must be prepared to fulfill all requirements from a certified small business entity capable of delivering military-compliant surface treatments with full documentation and quality control measures in place.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Quality Certification ServicesThe contract award is for Independent Testing and Certification Services to verify that the first production unit meets all specified material, dimensional, coating, and performance requirements. This effort, known as First Article Testing, is critical to confirming that the product conforms to the technical standards before full-scale production begins. The successful bidder will be responsible for conducting the required tests, documenting results, and submitting the official DI-NDTI-80809B report, which serves as the formal certification of compliance. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to compete. The solicitation falls under NAICS code 541380, which covers other scientific and technical consulting services, and is managed by the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. Responses must be submitted by July 31, 2026, with the opportunity posted on July 20, 2026, and all performance activities are tied to the defense supply chain through this procurement channel.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining and Fabrication of Washer (NSN 5310-01-175-9192)A precision copper alloy washer manufactured to NSN 5310-01-175-9192 must conform strictly to engineering drawing 81755-16Z001 and meet the material and coating standards specified by ASTM B194 and QQ-C-533. The contract requires full compliance with all technical specifications including first article testing to verify dimensional accuracy, material properties, and coating adherence prior to production. Packaging and marking must align with military and federal guidelines to ensure traceability and handling integrity. The vendor is obligated to complete all manufacturing, inspection, and delivery activities within 716 days after award, with no flexibility in the timeline. The opportunity is issued as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively available to small businesses classified under NAICS code 332722 for stamping and pressing operations. The U.S. Department of Defense, through the ASC SUPPLIER OPER AE AND AF DIV, is managing the solicitation with a response deadline of July 31, 2026, and the contract will be executed through the DLA Dibbs platform.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 Compliance and CUI Protection ServicesThe contract entails the implementation and evaluation of cybersecurity controls designed to safeguard Controlled Unclassified Information in alignment with NIST Special Publication 800-171 and Defense Federal Acquisition Regulation Supplement requirements. The work focuses on establishing, documenting, and testing technical and administrative safeguards to ensure compliance with federal standards for protecting sensitive but unclassified data handled by defense contractors. This subcontract is part of a broader effort by the Department of Defense to enforce stringent information security practices across its supply chain, ensuring that all entities handling CUI meet mandated protective measures. The solicitation is open for responses until July 27, 2026, and is classified under NAICS code 541512, indicating it relates to computer systems design services. The performing organization is the ASC SUPPLIER OPER AE AND AF DIV, operating under the Department of Defense. Although no specific location is provided for performance or point of contact, the work is expected to be carried out in environments where CUI is processed, stored, or transmitted. Compliance with NIST SP 800-171 will require a thorough gap assessment, remediation of identified weaknesses, and ongoing monitoring to maintain continuous adherence to the standard throughout the contract period.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Technical Data Package (TDP) Development and Engineering SupportThe contract seeks the development of a comprehensive Technical Data Package (TDP) to support a government procurement effort, focusing on detailed technical documentation for design, materials, performance characteristics, and interchangeability requirements. This deliverable is critical to enabling a competitive contract offer and ensuring compliance with all applicable Department of Defense specifications and standards. The work involves engineering support to produce accurate, complete, and government-ready data that facilitates evaluation, manufacturing, and lifecycle management of the system or component under consideration. Submission is required by July 27, 2026, and the opportunity is structured as a subcontract under NAICS code 541330 for engineering services. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no set-aside designation or specific performance location is provided, the documentation must meet federal contractual and technical expectations. Interested parties must respond through the DIBBS portal by the deadline to be considered for award.
Engineering Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493130
New
DIBBS
Packaging, Marking, and Shipment Preparation ServicesThe contract calls for comprehensive packaging, marking, and shipment preparation services aligned with MIL-STD-129 specifications to ensure all military shipments and storage containers are properly labeled and documented for seamless logistics reception by the Defense Logistics Agency. All work must adhere to F.O.B. Origin delivery terms, meaning the contractor is responsible for preparing and loading goods at the point of origin, with ownership and risk transferring to the government upon loading. The services are critical to maintaining compliance with DoD logistics standards, ensuring traceability, accuracy, and operational readiness during the movement of materiel. The contract is classified as a subcontract under NAICS code 493130, which corresponds to freight transportation arrangement, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation opened on July 20, 2026, with responses due by July 27, 2026. There is no specified set-aside status, and performance location details are not provided, implying the work may occur at any facility owned or operated by the contractor as long as delivery is F.O.B. Origin. Interested parties must submit proposals through the DIBBS portal at the provided UI link to be considered for award.
Farm Product Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks services for the development and validation of hazard warning labels for non-exempt hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard and the Globally Harmonized System of Classification and Labelling of Chemicals. The work requires precise technical expertise in chemical hazard classification, standardized pictograms, signal words, hazard statements, and precautionary language to produce compliant, durable, and universally understandable labels. The contractor must validate that all labeling accurately reflects the chemical risks and meets regulatory expectations through documented testing, review, and quality control. This is a subcontract issued under the NAICS code 541690 for other scientific and technical consulting services by the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is accessible via the DIBBS platform. The place of performance and point of contact details are not specified, indicating flexibility in execution but requiring proposers to clarify logistical and operational requirements in their submissions. All offerings must demonstrate proven capability in regulatory compliance and label design within the defense or industrial sector.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Industrial/Defense CommoditiesThe contract entails the manufacture and supply of industrial or defense-related commodities, potentially involving hazardous materials, under strict compliance with military standards for marking, warranty, inspection, and interchangeability. All items must meet rigorous technical and safety specifications to ensure consistent performance and compatibility within military systems, with no tolerance for deviation in quality or documentation. The work is classified as a subcontract and falls under NAICS code 332999, indicating non-specified industrial machinery and equipment manufacturing, with performance obligations tied to Department of Defense requirements. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. No set-aside designation or specific place of performance has been identified, leaving flexibility for the subcontractor’s operational locations. The contract does not include a point of contact, and all inquiries must be directed through the official DIBBS portal linked in the posting. Participation requires full adherence to defense procurement regulations, including handling, labeling, and tracking protocols for any materials classified as hazardous, and bidders must be prepared to demonstrate capability in meeting military-grade quality assurance and logistical standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Palletization ServicesThe contract requires the provision of military-compliant packaging, labeling, barcoding, and palletization services for hazardous absorbent pillows, strictly adhering to DLA and MIL-STD-129 standards to ensure full operational and regulatory alignment with Department of Defense requirements. All work must meet rigorous specifications for handling, identification, and logistics readiness, with an emphasis on safety, traceability, and interoperability within military supply chains. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses certified by the SBA are eligible to bid, promoting equitable opportunity within the defense contracting landscape. This subcontract opportunity, classified under NAICS code 493190, is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense and is open for responses until August 3, 2026. The place of performance and official office location details are not specified, but performance is expected to align with the logistical needs of the DLA. Interested parties must submit their proposals through the DIBBS portal prior to the deadline to be considered, and compliance with all technical, administrative, and regulatory requirements is mandatory for award eligibility.
Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Documentation ServicesThe contract titled Hazardous Materials Compliance & Documentation Services is a Small Business Set-Aside subcontract under NAICS code 541620, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. It seeks comprehensive regulatory compliance support centered on hazardous materials, requiring full adherence to OSHA, DLA, and other federal standards. Key deliverables include the preparation of Safety Data Sheets, accurate hazard labeling in compliance with global and domestic regulations, and thorough documentation review to ensure all materials are properly classified, declared, and documented throughout their lifecycle. Responses are due by August 3, 2026, and the contract is open exclusively to small businesses as defined by the SBA. Performance location details are unspecified, but the work will support defense supply chain operations requiring strict environmental, health, and safety compliance. This subcontract emphasizes precision in documentation and labeling to mitigate regulatory risk and ensure seamless integration into federal logistics and handling protocols. The solicitation is posted on DIBBS, and eligible firms must demonstrate proven experience in hazardous materials compliance, SDS development, and federal regulatory frameworks.
Environmental Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326220
New
DIBBS
Absorbent Hazardous Material Pillow SupplyThe contract calls for the supply of absorbent pillows specifically engineered to contain hazardous materials, with all products required to fully comply with federal and military performance standards for absorption efficiency, durability, and safety. Each unit must be packaged and labeled according to strict regulatory guidelines to ensure proper identification, handling, and deployment in sensitive defense and emergency response scenarios. The solicitation is designated as a total small business set-aside under SBA guidelines, meaning only eligible small businesses can compete, and it falls under NAICS code 326220 for plastic product manufacturing. Responses are due by August 3, 2026, and the contract is structured as a subcontract under the Department of Defense, administered by the ASC Supplier Operations AE and AF Division. All work must meet the required specifications for use in military and defense applications, with performance and compliance as primary evaluation criteria.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details