Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-16PJFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of two sleeve bushings, identified by NSN 3120-00-053-8629 and part number 3100131 from Whippany Actuation Systems, LLC. The requirement specifies strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for configuration change management, physical identification, and the removal of government identification from non-accepted supplies. While item identification must follow MIL-STD-130N, Item Unique Identification is not required by the service customer. Delivery is set for 162 days after order, with a need ship date of January 31, 2027, and an original required delivery date of June 14, 2028. The items are to be delivered FOB Origin and inspected and accepted at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements for procurement.

General Info

DoD procurement of two sleeve bushings from Whippany Actuation Systems for Tinker AFB.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-16PJ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
CHARLEEN WEBER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING, SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
CONFIGURATION CONTROL ITEM IAW CITED DRAWING AND/OR PART NUMBER. DOCUMENTATION REQUIREMENTS OF CLAUSE 52.211-9042 APPLY FOR NEW OFFERORS NOT CITED HEREIN. ITEM IDENTIFICATION IAW MIL-STD-130N, DTD 16-NOV-2012.
WHIPPANY ACTUATION SYSTEMS, LLC 81039 P/N 3100131
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740359 0001 EA 2.000
NSN/MATERIAL:3120000538629
SPE4A6-26-T-16PJ
SECTION B
PR: 7017740359 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:06/14/2028
SPE4A6-26-T-16PJ NSN/Part Number: 3120-00-053-8629 Quantity: 2 EA Purchase Request: 7017740359QTY: 2 Delivery: 162 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
PLATE, RETAINING, BEARIN
Solicitation # SPE4A6-26-T-16QD
This solicitation is for the procurement of 20 bearing retaining plates, identified by NSN 3110-01-568-8512 and Deere and Company part number T49100. The contract mandates strict domestic sourcing requirements under DFARS 252.225-7016, requiring that the bearings be manufactured in the United States or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. The agreement specifies a rapid delivery timeline of five days after order and requires adherence to various technical and quality standards, including CMMC Level 2 self-assessment and specific DLA packaging requirements. Preservation and marking must comply with MIL-DTL-197M and MIL-STD-129. Inspection and acceptance will occur at the point of origin, and the item is classified as a commercial product.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-16QR
This solicitation, identified as SPE4A6-26-T-16QR and issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 41 units of part number 0001S00000062. The contract requires a delivery timeline of 580 days after the order is placed. The primary focus of the technical requirements involves Production Lot Testing, where the contractor must submit a detailed test report to the Quality Assurance Representative for review. To ensure compliance, all shipments of Production Lot Test reports must be accompanied by specific documentation, including DD Form 1222, DD Form 250 or iRAPT receiving reports, material and process certifications, and inspection method sheets. Additionally, the contractor must provide copies of the contract, applicable test reports showing actual results against technical data package tolerances, and the drawings used during manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-Q-1323
This contract is for the procurement of 465 roller bearing units under solicitation SPE4A6-26-Q-1323. The items are designated as Air Force Critical Safety Items and Critical Application Items, requiring strict adherence to technical and quality requirements, including specific TDP revisions and QAP standards. All requests for waivers or deviations must be approved by the DSC contracting officer. The contractor must comply with DLA packaging requirements and MIL-STD-129 marking standards, ensuring each unit pack includes the lot number, serial number, part number, and applicable CAGE codes. Inspection and acceptance will occur at the origin, with a delivery timeline of 261 days after order. The final destination for shipment is DLA Distribution Cherry Point in North Carolina.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
BEARING, STAVE SHAPE
Solicitation # SPE7M4-26-T-337J
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of eight stave shape bearings under NSN 2010-01-271-6040. The contract requires delivery within 20 days after receipt of order and adheres to DLA packaging requirements. The item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification and completed mandatory export control training.
FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-16PV
This contract is a solicitation for the procurement of one sleeve bushing, identified as a critical application commercial item with NSN 3120-01-241-1591 and part number 106037029 from Bird-Johnson Propeller Company. The requirement includes strict adherence to DLA technical and quality standards, specifically regarding source approval, packaging, and the use of measuring and test equipment. A significant restriction is placed on the use of mercury or mercury-containing compounds, which are prohibited in the hardware, preservation, and packaging, with very limited exceptions for specific functional components. The delivery is set for 270 days after order, with a required delivery date of May 19, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Because the manufacturing of this item may require specific casting or forging and specialized tooling that the government may not possess, contractors are directed to submit a Casting and Forging Assistance Request if necessary. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the item must be physically identified according to specified bare item marking requirements.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A6-26-T-16MN
This contract is for the procurement of one liquid quantity transmitter, identified by NSN 6680-01-487-6252 and L3Harris Maritime Power and Energy part number 900-25001. The delivery is required within 20 days after the order, with the final destination being the USS Pinckney DDG 91. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. Compliance with DLA technical and quality requirements is mandatory, including specific packaging standards under MIL-STD-2073-1E and marking per MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-16MM
This solicitation, identified as SPE4A6-26-T-16MM, is for the procurement of one thrust washer bearing under NSN 3120-01-485-1838 for the Department of Defense ASC Commodities Division. The contract requires a rapid delivery turnaround of five days after order and adheres to strict quality and technical standards, including specific sampling methods based on MIL-STD-1916 or ASQ H1331. Compliance requirements include CMMC Level 2 certification, adherence to DLA packaging standards, and the use of approved measuring and test equipment. Furthermore, the item is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to handle the associated technical data.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, TRAC
Solicitation # SPE4A6-26-T-16SM
This contract is a solicitation for the procurement of three track roller bearings, identified by NSN 3110-01-497-9467. The items are designated as critical application items and must adhere to specific manufacturer part numbers from Electric Boat Corporation or Kamatics Corporation. Delivery is required within 169 days, with inspection and acceptance occurring at the origin. The contract mandates strict sourcing restrictions, requiring the bearings to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract enforces a mercury-free environment and requires compliance with DLA packaging, marking, and preservation standards, specifically MIL-STD-129 and MIL-DTL-197M.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
SLEEVE, BELT
Solicitation # SPE4A6-26-T-16TA
This contract is for the procurement of one belt sleeve bushing, identified by NSN 3120-13-118-8985 and part number 3632051520 from FN Herstal S.A. The order is managed under solicitation SPE4A6-26-T-16TA with a required delivery date of August 4, 2026, and a delivery timeframe of 20 days after order. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically for the Marine Aviation Logistics Squadron 26 in Jacksonville, North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Additionally, the contract specifies the application of covered defense information and requires the removal of government identification from any non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
ROLLER, LINEAR-ROTAR
Solicitation # SPE4A6-26-T-16SL
This contract is for the procurement of three linear-rotary motion rollers, identified by part number 5787883 and NSN 3120-01-421-3181. The items are designated as critical application items and must be manufactured according to TDP Rev A Gen 3 and basic drawing 53711. Delivery is required within 147 days, with a required delivery date of February 3, 2027, shipped FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, measuring and test equipment, and physical identification. Quality assurance will be managed through inspection and acceptance at the origin, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-16MV
This contract is a solicitation for the procurement of 12 annular ball bearings under NSN 3110-99-950-0076. The agreement mandates strict adherence to domestic sourcing restrictions, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. Quality and delivery requirements are stringent, with a delivery window of five days and inspection and acceptance occurring at the destination. Packaging and preservation must comply with MIL-DTL-197M and MIL-STD-129, and sampling methods must follow MIL-STD-1916 or ASQ H1331. The contract also incorporates specific DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and specific packaging requirements for procurement.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Precision Hardware Manufacturing – Thrust Bushing
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Handling and Certification
Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541618
New
DIBBS
Airworthiness Documentation and DART Database Upload
Other Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Compliance for DLA Shipment
Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332721
New
DIBBS
Manufacture of Critical Turnlock Fasteners (Stud Type)
Precision Turned Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Roadway Paving and Asphalt Services
Highway, Street, and Bridge Construction

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
FASTENER TAPE, HOOK
Solicitation # SPE4A6-26-T-16RB
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of 12 units of hook fastener tape under part number 5325-01-609-1508. The delivery requirement is set for 202 days after the order is placed. The procurement is governed by specific technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Compliance requires adherence to Cybersecurity Maturity Model Certification Level 2 and strict export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a focus on zero non-conformance for acceptance. The place of performance is located in New Cumberland, Pennsylvania.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-16QJ
This contract is for the procurement of one machine screw, identified by NSN 5305017018101 and part number 8543862-ITEM 34. The item must be manufactured according to basic drawing 53711 8543862 Revision A. Delivery is required within 20 days after the order, with a required delivery date of July 28, 2026. The shipment is FOB Origin and will be delivered to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg, Pennsylvania, using traceable shipping methods. The agreement incorporates several technical and quality requirements, including DLA packaging standards, covered defense information protocols, and specific marking and identification guidelines. Quality assurance is governed by certificate of conformance procedures and strict sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA procurement requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three structural aluminum plates under NSN 1560-01-723-7586. The contract requires delivery within 198 days after receipt of order and is categorized under NAICS code 336413. Performance is to take place in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details