Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-27DTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of 38 sleeve bushings under NSN 3120-01-256-2309 for the Department of Defense ASC Commodities Division. The contract requires a delivery period of 269 days after the order is placed. Because the manufacturing process may involve casting or forging and requires specific tooling that the government may not possess, contractors are advised to seek assistance through the DLA Casting and Forging Assistance Request channels. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to strict export controls under ITAR and EAR regulations. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Additional mandates include specific DLA packaging requirements, inspection and acceptance at origin, and the application of covered defense information protocols.

General Info

DoD procurement of 38 sleeve bushings requiring CMMC Level 2 and ITAR compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-27DT Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Robye Dewitt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING,SLEEVE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE4A6-26-T-27DT
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-01-256-2309 Quantity: 38 EA Purchase Request: 7017869989QTY: 38 Delivery: 269 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, BALL AND RO
Solicitation # SPE4A6-26-T-27ED
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-27ED, is for the procurement of four ball and roller bearings identified by NSN 3110-01-653-2309. The items are classified as commercial critical application items and must adhere to technical specifications including TDP Rev A Gen 1 and basic CID A-A-59585C. Delivery is required within 193 days, with inspection and acceptance occurring at the point of origin. A strict domestic sourcing restriction applies, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Quality and sampling must comply with MIL-STD-1916 or ASQ H1331, and packaging must follow MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-27EA
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27EA, is for the procurement of nine thrust washer bearings, identified by NSN 3120-01-129-0508. The contract falls under NAICS code 332991 and requires delivery within 87 days after receipt of order. Performance is centered in New Cumberland, Pennsylvania, and the primary point of contact is Robye Dewitt. The agreement is subject to stringent technical and quality standards, including DLA packaging requirements, origin inspection and acceptance, and specific measuring and test equipment standards. Notably, the contract involves covered defense information and is subject to export controls under ITAR and EAR regulations. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
Federal
67--CASE,PHOTOGRAPHIC EQUI
Solicitation # SPE8E926T3745
DLA Troop Support is seeking quotes for the procurement of 350 photographic equipment cases under solicitation SPE8E926T3745. The required items must be black and conform to approved source 65442 1470, with delivery to the DLA Distribution Depot in Oklahoma required within 90 days after the order is placed. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 332991. Interested parties must submit their quotes electronically by the deadline of September 18, 2026. The solicitation is available exclusively online, and no hard copies or separate technical drawings are provided. All inquiries should be directed to the buyer via the DLA Dibbs portal.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332991
New
DIBBS
CASE ASSEMBLY, FILTER
Solicitation # SPE4A6-26-R-XD40
This federal solicitation, issued by the Department of Defense under the ASC Commodities Division, is for the procurement of Case Assembly, Filter units identified by NSN 2915-00-673-9595. The contract is designated as a total small business set-aside under FAR 19.5, with the solicitation posted on September 4, 2026, and a response deadline of September 14, 2026. The required delivery timeline is 390 days after the order is received. Primary coordination for this requirement is managed by Brittany Greene, and interested parties can access further details through the DIBBS portal using solicitation number SPE4A6-26-R-XD40.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 332991
New
SLED
Dump Body Supplier and Installer
Comptroller of Public Accounts

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 332991
New
Federal
Supply of Bonded Inserts (NIIN 016501786)
SPRMM1 DLA Mechanicsburg

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 332991
New
Federal
INSERT, BONDED
Solicitation # SPRMM126QKH87
This solicitation, issued by DLA Mechanicsburg, seeks the manufacture of bonded inserts. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria and is issued under SEPA-EAF authority. Key requirements include adherence to MIL-I-45208 or ISO 9001 quality standards, marking in accordance with MIL-STD-130, and strict compliance with mercury-free mandates for use on submarines and surface ships. Contractors must submit invoices and receiving reports electronically via PIEE-WAWF and are required to maintain CMMC Level 1 certification. If the offeror is not the original equipment manufacturer, they must identify the OEM and their CAGE code. The contract prohibits unauthorized changes to production facilities and requires specific documentation for any design or part number substitutions. All packaging must comply with MIL-STD 2073.
SPRMM1 DLA Mechanicsburg

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 332991
New
Federal
BEARING,SLEEVE
Solicitation # SPRMM126QMJ17
This solicitation from DLA Mechanicsburg is for the manufacture and supply of sleeve bearings. The procurement utilizes Lowest Price Technically Acceptable criteria for award evaluations and requires compliance with ISO9001 higher-level quality standards. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073. Contractors must provide proof of being an authorized distributor of the original manufacturer's item to be considered for award. Key administrative requirements include the use of PIEE-WAWF for electronic submission of invoices and receiving reports. The contract mandates strict adherence to design specifications, with a specific process for requesting substitutions or part number changes. Additionally, the government requires a minimum quote validity of 60 days and prohibits the performance of work at any facility other than the one named in the contract without prior written approval and a corresponding administrative fee.
SPRMM1 DLA Mechanicsburg

POSTED

4 days ago

DEADLINE

in 16 days
View Details
NAICS: 332991
New
SLED
270000900053,RFQ,82,1 - BEARING BLOCKS, HOUSING, MFR.: FLOWSERVE
Solicitation # 231863
The City of Los Angeles has issued Request for Quotation number 231863 for the procurement of bearing block housings manufactured by Flowserve. This local government solicitation is managed by the City of Los Angeles and requires responses to be submitted by September 10, 2026, at 2:00 PM. Interested vendors should coordinate with Katherine Quinn for specific inquiries regarding the bid. Participation may require registration on the official City of Los Angeles website to complete the bidding process. Performance of the contract will take place in Los Angeles, California.
City of Los Angeles

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
Supply of Ball Rod End Bearings (NSN 3110012897898)
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
Supply of Fluid Filters (NSN 4330010752013)
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 332991
New
DIBBS
Supply of Machine Screws (NSN 5305016170692)
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

5 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-27DA
This contract is for the procurement of two special purpose electrical cable assemblies, identified by NSN 6150-01-347-0052 and part number 29105605. The items are designated as critical application items and must be produced in accordance with the technical data package Revision A Gen 1. Delivery is required within five days after the order, with the shipment destined for the DHS CBP Office of Air and Marine in Tucson, Arizona. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically RP001, MIL-STD-129, and ASTM D3951. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contractor must comply with CMMC Level 2 self-assessment and covered defense information requirements.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-4082
This solicitation is for the procurement of 198 blind rivets under NSN 5320-00-161-2398 for the Department of Defense ASC Commodities Division. The contract is a total small business set-aside with a delivery requirement of 161 days after order. The items must be manufactured according to the current revision of the applicable military or consensus non-government part standard, though hardware produced previously to a then-current revision remains acceptable. Quality and technical compliance are governed by DLA master requirements, including specific mandates for packaging, bare item marking, and the removal of government identification from non-accepted supplies. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels and AQLs assigned to critical, major, and minor attributes.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-27DE
This contract is for the procurement of 30 hexagon head cap screws, identified by NSN 5305016688703 and part number BRKD-DBC-MHGB from JDCI Enterprises, Inc. The item is classified as a Commercial Off The Shelf product. Due to the proprietary nature of the technical data, there is no approved technical data package available for competitive procurement. The delivery requirement is set for 20 days after order, with shipping and inspection points designated as destination. The shipment is destined for Fleet Activities Sasebo in Japan, with packaging and marking requirements adhering to MIL-STD-2073-1E and MIL-STD-129. The contract incorporates specific DLA master list technical and quality requirements, including the removal of government identification from non-accepted supplies and the potential application of covered defense information. The original required delivery date is August 27, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, RIBBED SHOULDER
Solicitation # SPE4A6-26-T-27DK
This contract is for the procurement of 12,112 ribbed shoulder bolts, identified by NSN 5306014109087. The items are designated as critical application items and must adhere to strict quality and technical requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards. A key restriction is the prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. The agreement specifies a delivery timeframe of 121 days, with a required delivery date of May 6, 2027, shipping FOB Origin to DLA Distribution Red River in Texarkana, Texas. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-27EG
This contract is a solicitation for the procurement of 10 machine bolts, identified by NSN 5306-66-150-7810 and part number 10302 for Thales Australia Bendigo Land. The agreement specifies a delivery timeframe of 10 days after receipt of order, with a required delivery date of January 29, 2026. Delivery is set as FOB Origin, while both inspection and acceptance will occur at the destination, which is the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances in sample lots unless otherwise specified. There is no allowed quantity variance, meaning the exact amount of 10 units must be supplied.
Nonferrous Forging

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-27DM
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DM, is for the procurement of three shoulder screws identified by NSN 5305-01-508-1718. The contract requires delivery within 203 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, with a response deadline of September 16, 2026. The agreement includes stringent regulatory and security requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and marking standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additionally, the contract mandates the removal of government identification from non-accepted supplies and compliance with the DLA Master List of Technical and Quality Requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-27CM
This contract is for the procurement of five cable assemblies, identified by NSN 6150-01-724-2744 and part number 81007 from Nishati Inc. The order is managed under purchase request 7018068236 with a required delivery date of November 21, 2026, and a delivery window of 65 days. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract specifies a zero percent quantity variance, meaning the exact amount of five units must be delivered.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANC
Solicitation # SPE4A6-26-T-26XK
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-26XK, is for the procurement of one close tolerance bolt, identified by NSN 5306-00-582-6419. The requirement is fully competitive and adheres to military and federal specifications. Delivery is required within five days after receipt of order, with the place of performance located at Fort Campbell. The contract incorporates several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. While covered defense information potentially applies, item unique identification is not required per the service customer. The response deadline for this solicitation is September 15, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPEA46-26-T-26TS
Solicitation SPE4A6-26-T-26TS, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for close tolerance screws identified by NSN 5305010666750 and part number NAS1580A4T6. The procurement involves multiple line items with varying quantities, delivered as packages of 50 units. Delivery is required within five days of order, with shipping terms set as FOB Destination. Shipments are destined for various government locations, including the USS Theodore Roosevelt, USS George H W Bush, ASD Oceana in Virginia Beach, and other military installations. The contract mandates strict quality and technical compliance, requiring adherence to the DLA Master List of Technical and Quality Requirements and the current revision of the applicable part standard. Inspection and acceptance are conducted at the origin, with sampling performed according to MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific requirements for fasteners to have the entire length of the shank and threads protected by a wrap or sleeve. Offerors must submit quotes via the DIBBS portal by September 11, 2026, and are prohibited from using additive manufacturing processes unless specifically authorized.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-27DL
This solicitation is for the procurement of 25 flat washers, identified by NSN 5310-00-182-6787 and part number LM307-34 from Lord Corp. The contract is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DL, with a required delivery timeframe of 5 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements and physical identification marking standards. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Technical and quality requirements are governed by the DLA Master List, and any non-accepted supplies must have government identification removed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, RATCHET
Solicitation # SPE4A6-26-T-27DH
This contract is for the procurement of four ratchet wrenches, identified by NSN 5120410026077 and part number 2300716-0 from Steyr Motors AG. The order is managed under solicitation SPE4A6-26-T-27DH by the Department of Defense ASC Commodities Division. Delivery is required within 64 days of order, with a final required delivery date of April 17, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. A critical restriction is placed on the use of mercury, which shall not be intentionally added to the hardware except in specific functional exceptions. Quality assurance will be conducted at the destination using sampling methods aligned with MIL-STD-1916 or ASQ H1331.
Saw Blade and Handtool Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-26-T-27CY
This contract is for the procurement of 121 cotter pins under solicitation number SPE4A6-26-T-27CY for the Department of Defense. The items must adhere to specific technical standards, including NASM24665 Revision 03 and ASME B18.8.1, and are classified as critical application items. Delivery is required within 90 days, with a need ship date of December 16, 2026, and a final delivery date of December 20, 2026. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality conformance is managed through a Certificate of Quality Compliance and specific sampling methods based on MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the origin, and the contract specifies a zero percent quantity variance. Physical identification must follow MIL-STD-130N, although Item Unique Identification is not required.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS