Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-11YPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 81 units of a BUSHING, SLEEVE with part number SLS102D10-10 and NSN 3120-01-417-0143, supplied by SPS TECHNOLOGIES LLC. The item must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which take precedence over any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization following RP001 guidelines. The item does not require Unique Identification per the Service customer’s request, and government identification must be removed from non-accepted supplies. Delivery is FOB origin, with inspection and acceptance occurring at destination. The unit of issue is each, with no variance allowed in quantity. The required delivery date is 171 days after award, with an original deadline of September 7, 2027, and a need ship date of January 31, 2027. All items must be delivered to the designated DLA distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE4A6-26-T-11YP, and pricing is set at $81.00 per unit for a total of $6,561.00. The procurement follows DoD authorized units of issue and is subject to transportation directives outlined in DLAD Proc Notes C19 and C20.

General Info

81 bushings SLS102D10-10 at $81 each delivered to New Cumberland by Jan 31, 2027, FOB origin, per DLA specs.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11YP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Kameron Heningburg
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING<(>,<)> SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPS TECHNOLOGIES LLC 97393 P/N SLS102D10-10
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739971 0001 EA 81.000
NSN/MATERIAL:3120014170143
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-11YP
SECTION B
PR: 7017739971 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:09/07/2027
SPE4A6-26-T-11YP NSN/Part Number: 3120-01-417-0143 Quantity: 81 EA Purchase Request: 7017739971QTY: 81 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
Precision Titanium Forging and CastingThe contract entails the precision manufacturing of a titanium tube elbow using either forging or casting techniques, with all tooling designed and fabricated in-house to comply with stringent military specifications. The work requires advanced metallurgical expertise and strict adherence to quality control standards to ensure the component meets the performance and durability requirements for defense applications. The contractor must demonstrate capability in titanium processing, including thermal and mechanical control during fabrication, and must maintain full traceability of materials and processes throughout production. The contract is issued under the NAICS code 332111 for forged steel and forging shops, and the performance location is specified as Lemoore, California, with a delivery deadline of August 17, 2026. Offerors must respond by the stated deadline, and while the solicitation is classified as a subcontract, no set-aside provisions are designated, indicating it is open to all qualified entities. The contracting activity falls under the Department of Defense’s Fluid Handling Division, and the project is expected to integrate into critical fluid systems requiring high-strength, corrosion-resistant titanium components.
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting of Copper Alloy Pipe FittingThe contract calls for the precision casting of 1-inch nominal copper alloy socket-type pipe tees, identified by NSN 4730-00-542-5250, to meet the stringent requirements of MIL-DTL-1183K(2) and related military specifications. Production must adhere to lot-based manufacturing protocols with rigorous quality control measures to ensure dimensional accuracy, material integrity, and performance under operational conditions. The work is designated as a total small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 332111 classifying the activity as copper foundries. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the casting and associated quality assurance activities must occur. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, and is structured as a subcontract opportunity under the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
Supply of Metal Bar (NSN 9530-01-691-7904)The Defense Logistics Agency is seeking subcontractors to supply four precision metal bar components with part number 7053887-3 and CAGE code 53711, each conforming to strict technical and quality standards set by DLA. The item is identified by NSN 9530-01-691-7904 and falls under the NAICS code 332111, indicating it pertains to forged steel and forged ferrous alloy product manufacturing. The solicitation was posted on August 4, 2026, with responses due by August 18, 2026, and delivery must occur to meet DLA's operational requirements. The contract is classified as a subcontract, with no set-aside provisions specified, and performance location details are not provided. All submissions must adhere to DLA's specifications to ensure compatibility and reliability in defense applications.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332111
New
DIBBS
PIN, SPRING
Solicitation # SPE4A6-26-T-11VB
This contract pertains to the procurement of a PIN, SPRING with NSN 5315011565226, under solicitation SPE4A6-26-T-11VB, issued by the Department of Defense’s ASC Commodities Division. A total quantity of 37 units is requested at a unit price of $37.00, with delivery required within 171 days and FOB origin terms. The item is classified as a critical application component supplied by Cooper Cameron Corp, with part number 5448-37528. Upon exhaustion of existing stock and surplus inventory, future procurements will be restricted to surplus sources only, and the item will be designated as non-procurable. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Palletization and preservation must adhere to DLA packaging requirements, and the use of mercury or mercury-containing compounds is strictly prohibited in preservation, packaging, and direct contact with the item, except for specific functional uses such as batteries, fluorescent lamps, sensors, or regulated chemical reagents, which must include secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at destination, with sampling governed by MIL-STD-1916 or ASQ H1331, and zero non-conformances required unless otherwise specified. The delivery address is DLA District San Joaquin in Tracy, California, and transportation guidelines reference DLAD procedural notes C19 and C20. Technical and quality requirements are enforced through the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the solicitation is subject to the revision of the master in effect as of the award date.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11ZF
The contract specifies the procurement of a bushing sleeve with part number NAS72-7-009 and NSN 3120-01-445-4645, requiring 84 units to be delivered FOB origin within 171 days, with a final delivery deadline of March 23, 2027. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data that the government cannot provide; only vendors with direct access to this data or traceability to approved sources are eligible to quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific mandates including tailored higher-level quality standards, inspection and acceptance at origin, and removal of government identification from non-accepted items. Packaging must comply with ASTM D3951 and MIL-STD-129, in alignment with DLA Packaging Requirements, including palletization per RP001, and all markings must adhere to RQ017 for physical identification. Item Unique Identification is not required per customer request. The contract mandates the use of approved measuring and test equipment per RT001 and requires SAR package submission for any new source approval. Delivery is directed to Tracy, CA, with no quantity variance permitted. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A6-26-T-11ZF, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A6-26-T-12FX
The contract pertains to the procurement of 54 units of a PIN, SHOULDER, HEADED component identified by NSN 5315-01-434-1336, under solicitation SPE4A6-26-T-12FX, which is a Total Small Business Set-Aside as defined by FAR 19.5. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and delivery is required within 171 days after order. The item is subject to comprehensive DLA packaging, technical, and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for configuration change management, inspection and acceptance at origin, removal of government identification from non-accepted items, and physical identification marking. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and requiring authorized access only to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory training and been approved by DLA. The place of performance is specified as New Cumberland, PA, and the contracting activity falls under the Department of Defense’s ASC Commodities Division, with Michael Jefferson designated as the primary point of contact. The NAICS code 332111 indicates the industry classification for metal forgings and stampings, and all performance obligations are governed by federal acquisition rules and DLA-specific compliance protocols.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1941
The contract specifies the procurement of 10 feet of cold-finished, annealed steel bar made from Type 303 alloy, with a diameter of exactly 1.000 inch and a nominal weight of 2.670 pounds per foot. The material must be supplied in whole-foot lengths between 8 and 16 feet, with no fractional measurements permitted. Comprehensive technical and quality requirements are mandated as defined in the DLA Master List of Technical and Quality Requirements, and compliance with ASTM A582/A582M, MIL-STD-129R, ASTM A700-14, and SAE AMS2806 is required. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings on each unit must include the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions, with acceptable methods limited to stamping or stenciling using non-contaminating, waterproof inks. Adhesive labels are required for small-diameter bars, tubes, and shapes under 0.250 inch, and tags are acceptable for wire. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared. The QSL program mandates full compliance, and non-compliant products may result in criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, with special codes Z and ZZ applied per ASTM A700 for preservation and packaging. Markings must follow MIL-STD-129, including dual-unit labeling when applicable, and shipments must not use parcel post. Delivery is FOB origin with a five-day lead time and a 10% quantity variance allowed upward only. The delivery address is the USS Jeremiah Denton warehouse at Gulfport, Mississippi, with a required delivery date of August 6, 2026. The contract references multiple data requirements including CDRL-METALSCERT, and all documentation must align with the technical data package and procurement notes governing qualified supplier status.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332111
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-09YL
This contract issued by the ASC Commodities Division of the Department of Defense specifies the procurement of 391 units of PIN, SHOULDER, HEADLESS (NSN 5315012165810) under solicitation SPE4A6-26-T-09YL, with a required delivery date of April 23, 2027, and a 155-day delivery window from order placement. The item is source-controlled and must be manufactured and tested in accordance with limited rights data that only approved vendors can access; vendors without direct access to this data or traceability to approved sources such as The Boeing Company, Reid Products Inc., SPS Technologies LLC, and others must submit a Source Approval Request (SAR) package. All supplies must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override other standards like ASTM D3951. Packaging must align with MIL-STD-129 for labeling and marking, and palletization must follow RP001 requirements; bare item marking per RQ017 and removal of government identification from non-accepted supplies per RQ011 are mandatory. Inspection and acceptance occur at the destination facility in Jacksonville, Florida, with sampling governed by MIL-STD-1916 or ASQ H1331, mandating zero non-conformances for acceptance unless otherwise directed, and attributing critical, major, and minor characteristics to verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Hazardous materials must be labeled per OSHA standards and DFARS clauses, with Safety Data Sheets required, and radioactive materials must conform to MIL-STD-129 thresholds. Ocean transportation requires use of U.S.-flag vessels unless exempted, and subcontractors must flow down these requirements. Compliance with cybersecurity clauses including 252.204-7012 for safeguarding covered defense information and 52.222-50 for combating trafficking in persons is required. Offerors must have a valid UEI and CAGE code, and socioeconomic status representations for small business set-asides must be submitted. The contract employs a fixed-price structure with no price listed, implying an LPTA award approach, and all proposals must be submitted electronically via DIBBS by the August 7, 2026,
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332111
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-12BT
The contract pertains to the procurement of 534 units of PIN, STRAIGHT, HEADED with NSN 5315-01-382-7440 under solicitation SPE4A6-26-T-12BT, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, with responses due by August 12, 2026, and the solicitation posted on August 4, 2026. The item is governed by DLA packaging requirements and incorporates technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The technical data associated with this item is subject to export control under either ITAR or EAR, requiring authorized clearance before any disclosure or transfer to foreign persons or entities, including foreign nationals within the U.S., and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, having completed mandated DOD export training and the DLA questionnaire, and receiving formal approval from DLA authorities. The place of performance is Anniston, Alabama, 36201-4199, and the primary point of contact is Samantha Hopkins, reachable via email and phone as provided.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
ADAPTER, STORES HOIS
Solicitation # SPE4A7-26-Q-0967
The contract pertains to the procurement of 12 units of an ADAPTER, STORES HOIST with NSN 1560-01-309-1892, under solicitation SPE4A7-26-Q-0967, with a response deadline of August 18, 2026, and a delivery requirement of 157 days after award. Manufacturing may require casting or forging processes, and specialized tooling is likely involved; if the government does not possess such tooling, vendors must submit a Casting and Forging Assistance Request through the designated DLA portal. The contract incorporates applicable technical and quality requirements from the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. It is subject to Covered Defense Information protocols and mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 certification by a third-party assessment organization. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per specified requirements. The use of mercury or mercury-containing compounds is strictly prohibited except in specific exempted applications such as certain batteries, fluorescent lights, sensors, weapon systems, or chemical reagents, with additional containment and shock-proofing requirements for portable devices containing mercury. Export control regulations under ITAR or EAR apply to associated technical data, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling controlled data, and formal DLA authorization. The point of contact for inquiries is Shelbye Booker of the Department of Defense, ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332111
New
DIBBS
Precision Forging of Aerospace-Grade Hinge ComponentsThe contract calls for the precision forging of butt hinge leaf components using 4130 or 4140 steel, strictly adhering to aerospace-grade material specifications. The work encompasses full manufacturing processes including die preparation, heat forming, and initial shaping to ensure dimensional accuracy and structural integrity required for defense applications. All activities must comply with rigorous industry standards for material composition, heat treatment, and mechanical properties to meet the demanding performance criteria of aerospace systems. Performance is mandated at Tinker Air Force Base, Oklahoma, with a submission deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. Classified as a subcontract under NAICS code 332111, the opportunity is issued by the Department of Defense through LAND SUPPLY CHAIN. The contract requires proven capability in high-precision metalworking for defense-related components, with no set-aside preferences indicated. Interested parties must respond through the designated DIBBS portal by the specified deadline to be considered for award.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332111
New
DIBBS
Precision Sleeve Spacer ManufacturingThe contract calls for the manufacture of a single precision spacer sleeve identified by NSN 5365-01-702-9009, constructed to meet stringent technical specifications mandated by the Defense Logistics Agency. Critical to compliance is the requirement to subject the component to accelerated life testing at 105 percent plus or minus 0.5 percent of its rated voltage, ensuring operational reliability under extreme conditions. The project falls under the NAICS code 332111, indicating it is a precision manufacturing subcontract focused on machine shop work. Performance is to be carried out in Mechanicsburg, Pennsylvania, with a zip code of 17050-2411, and the work is under the purview of the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 3, 2026, with a firm deadline for responses set for August 11, 2026, leaving a narrow window of eight days for qualified vendors to submit proposals. This is a subcontract opportunity, meaning the award will be made to a supplier engaging directly with a prime contractor, not the government entity itself. No set-aside status or specific small business designation is indicated, and there is no designated point of contact listed in the public data. All submissions must be made through the DIBBS system via the provided UI link, and adherence to technical and testing parameters is non-negotiable for contract award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335314
New
DIBBS
Small Business Teaming / Joint Venture ParticipationSmall businesses certified as Women-Owned Small Businesses, Economically Disadvantaged Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, or HUBZone firms are invited to participate in a subcontract opportunity under the Department of Defense’s ASC Commodities Division. This opportunity allows eligible firms to form teaming arrangements or joint ventures after award, with small business representation permitted in accordance with FAR clauses, ensuring compliance with federal small business program requirements. The contract, classified under NAICS code 335314 for Electric Lamp Bulb and Part Manufacturing, requires performance at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation opens on August 4, 2026, and responses must be submitted by August 7, 2026, though no formal solicitation number is provided. Participation is exclusively available to qualified small businesses seeking to collaborate under teaming or joint venture structures, with the intent to promote small business involvement in defense-related subcontracting.
Relay and Industrial Control Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding for SubcontractorsSubcontractors are required to implement all NIST SP 800-171 controls to safeguard Controlled Unclassified Information (CUI) within their systems, in full compliance with DFARS contractual obligations. This mandate applies to any entity handling CUI on behalf of the Department of Defense through the ASC Commodities Division, ensuring consistent protection of sensitive but unclassified data across the supply chain. The contract is positioned as a subcontract under NAICS code 541512 and requires immediate action, with responses due by August 7, 2026, following an August 4, 2026 posting. Performance must occur at the specified location in New Cumberland, Pennsylvania, with zip code 17070-5002, and all contractual obligations must be met without exception to maintain eligibility and avoid noncompliance penalties.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract titled Hazardous Materials Packaging and Labeling Services requires specialized work in the safe containment, labeling, and documentation of hazardous materials adhering strictly to military and OSHA regulatory standards. The work is intended for the ASC COMMODITIES DIVISION under the Department of Defense and must be performed at the designated location in New Cumberland with a ZIP code of 17070-5002. All packaging and labeling must ensure compliance with federal safety protocols for transport, storage, and handling of hazardous substances, with particular attention to accuracy, durability, and traceability of documentation. The solicitation is structured as a subcontract and remains open for responses until August 7, 2026, with a posted date of August 4, 2026, indicating a tight turnaround window for qualified vendors to submit proposals. The NAICS code 561910 classifies this as other support services for waste management and remediation, emphasizing the technical and regulatory precision needed for successful performance.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
Technical Component Supply (Unspecified Items)The contract involves the supply of unspecified technical components under CLINs PR:0002 to PR:0004, with an emphasis on items likely related to electrical or hazardous systems requiring strict regulatory compliance. These components are sourced under a subcontract and fall under the NAICS code 335314, indicating a focus on electric lighting equipment manufacturing, though the exact nature of the items remains undisclosed. The performance location is designated as New Cumberland with a ZIP code of 17070-5002, and the awarding organization is the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline set for August 7, 2026, indicating a short procurement window typical for urgent or time-sensitive military supply needs. The absence of set-aside designation and point of contact details suggests this is a straightforward procurement process handled internally by the agency with minimal vendor categorization requirements.
Relay and Industrial Control Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
Control Panel Manufacturing and AssemblyThe contract encompasses the manufacture and assembly of control box panels identified by NSN 6220-00-573-7385, requiring strict adherence to military specifications for labeling, packaging, and quality assurance protocols. All work must meet rigorous defense standards to ensure reliability and compatibility in operational environments, with full compliance expected across production, testing, and documentation processes. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical site where交付 and inspections will occur. Issued under the Department of Defense through the ASC Commodities Division, this subcontract solicitation falls under NAICS code 335314, which classifies it within the electrical equipment manufacturing sector. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, creating a tight three-day window for proposers to submit bids. The contract opportunity is accessible via the DIBBS platform, and while no specific set-aside designation or point of contact is listed, the requirement remains open to qualified subcontractors capable of fulfilling the technical and compliance demands of a defense-related procurement.
Relay and Industrial Control Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Sampling ServicesThe contract calls for third-party acceptance sampling and inspection of fasteners in accordance with MIL-STD-1916, using specified acceptance quality limits for critical, major, and minor defects to ensure compliance with military standards. The work involves rigorous quality control procedures to verify that fastener batches meet required specifications prior to acceptance, with inspections conducted at defined sampling levels tied to defect classifications. Performance is tied to strict adherence to the standard and accurate documentation of results to support supply chain integrity. The contract is a subcontract under the Department of Defense’s ASC Commodities Division, with the place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. It was posted on August 4, 2026, and responses are due by August 12, 2026. The North American Industry Classification System code of 541330 indicates the work falls under professional, scientific, and technical services related to analytical and testing laboratories. The solicitation is managed through the DIBBS platform, and bidders must be prepared to meet all technical, logistical, and compliance requirements for defense-related quality assurance services.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Hazard Labeling ServicesThe contract requires the provision of military-compliant packaging, marking, and hazard warning labels for screws delivered under strict adherence to MIL-STD-2073-1E for packaging standards, MIL-STD-129 for marking requirements, and OSHA HAZCOM regulations for hazard communication. All materials and labeling must meet exacting defense and safety protocols to ensure proper handling, identification, and safety compliance throughout the supply chain. The work is designated as a subcontract under NAICS code 561910 and is managed by the ASC Commodities Division of the Department of Defense. Performance is mandated at New Cumberland, Pennsylvania, with the zip code 17070-5002 as the specified location for delivery and compliance verification. Proposals must be submitted by August 12, 2026, with the solicitation posted on August 4, 2026, and all responses must be directed through the DIBBS portal linked in the official notice.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
Precision Fastener Manufacturing and SupplyThe contract involves the manufacture and supply of 272 hexagon head cap screws identified by NSN 5305010280747, all of which must fully comply with established military specifications covering material composition, dimensional tolerances, packaging requirements, marking standards, and quality assurance protocols. The work is being procured under a subcontract by the ASC Commodities Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026, with the NAICS code 332996 designating this as a specialized manufacturing activity in the fastener and hardware sector. All deliverables must meet rigorous defense standards to ensure compatibility, durability, and reliability under operational conditions.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423690
New
DIBBS
Electrical Components and Raw Materials Supply for Defense Cable AssemblyThe contract solicits the supply of military specification electrical components including conductors, connectors, shielding, and insulating materials essential for manufacturing defense-grade cable assemblies. These materials must meet rigorous performance and reliability standards required for military applications, ensuring compatibility and durability under extreme operational conditions. The procurement is structured as a subcontract under NAICS code 423690, with performance obligations tied to the location in Tracy, California, identified by the zip code 95304-5000. The issuing agency is the ASC Commodities Division within the Department of Defense, which oversees the procurement to support critical defense systems. Solicitation opened on August 4, 2026, with a strict response deadline of August 7, 2026, indicating a tight turnaround for vendor submissions. Interested parties must ensure compliance with all mil-spec requirements and submit proposals through the official DIBBS portal at the provided URL. Although no set-aside designation is specified, participation requires adherence to federal defense contracting protocols, and successful bidders will be expected to deliver materials that fully conform to technical specifications for use in mission-critical defense cable assemblies.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
Special Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture and delivery of two special-purpose electrical cable assemblies that must fully comply with military specifications and meet DLA quality standards. The work is to be performed in Tracy, California, with the zip code 95304-5000 designated as the place of performance. The solicitation, issued under the NAICS code 334419 for other electrical equipment and component manufacturing, is classified as a subcontract and was posted on August 4, 2026, with a response deadline of August 7, 2026. The contracting activity is managed by the ASC Commodities Division within the Department of Defense. All deliverables must adhere strictly to the required technical and quality benchmarks established by military and DLA requirements to ensure operational suitability and reliability in authorized applications.
Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Technical Compliance SupportThe contract titled Quality Assurance and Technical Compliance Support encompasses a range of quality control, testing, and documentation services designed to ensure full adherence to military standards. This includes the preparation and management of Material Safety Data Sheets, detailed inspection reports, and comprehensive traceability systems to guarantee the integrity and compliance of all materials and processes. The work is critical to maintaining defense-grade quality and regulatory alignment across the supply chain, requiring strict procedural discipline and technical expertise. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 541330 indicating its classification under engineering services. The solicitation is managed by the ASC Commodities Division within the Department of Defense and is open for response until August 19, 2026, with the original posting date of August 4, 2026. The place of performance and specific location details are not specified, but all deliverables must meet the rigorous technical and administrative requirements demanded by military specifications. Participation is restricted to small businesses qualifying under the SBA’s set-aside program.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Logistics and Worldwide Distribution SupportThe contract titled Logistics and Worldwide Distribution Support is a small business set-aside subcontract under the SBA program, assigned the NAICS code 493190 for warehousing and storage, and issued by the ASC Commodities Division within the Department of Defense. It requires comprehensive global coordination of shipping, storage, and order fulfillment for cable assemblies, ensuring timely delivery to DLA depots while maintaining strict federal logistics compliance. The contractor must manage inventory levels, track shipments across international borders, and adhere to all military supply chain protocols, including documentation, reporting, and regulatory standards for defense-related materials. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the performance location spans worldwide, with no specific city or state designated. The work demands end-to-end supply chain visibility, reliable logistics infrastructure, and proven experience in supporting federal defense operations. Only small businesses are eligible to bid, and the successful vendor will be responsible for end-to-end execution from warehouse receipt to depot delivery, with an emphasis on operational precision, accountability, and adherence to defense logistics requirements.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details