This Solicitation opportunity from Department Of Defense was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BUSHING, SLEEVE

Closed

SPE4A6-25-T-17MVFederal

Submission Closed05/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991

New

DIBBS

BEARING, BALL, ANNULAThis contract pertains to the procurement of nine units of ball bearings identified by NSN/Part Number 3110-01-481-4603, specifically described as "BEARING, BALL, ANNULA." The solicitation, numbered SPE4A6-26-T-94H8, was issued by the Defense Logistics Agency under the Department of Defense and posted on June 16, 2026. Interested parties had until June 24, 2026, to submit their responses. The solicitation type is classified as a request for proposals or bids, but it does not specify any set-aside categories or applicable NAICS codes. The contract is a federal acquisition effort by the Department of Defense through the Defense Logistics Agency, with no specific geographic location for delivery or performance provided. The details such as contact points and precise office addresses were not included in the contract data. The procurement process is hosted on the DIBBS platform, indicating standard government procurement procedures for sourcing these mechanical components.

Defense Logistics Agency

POSTED

DEADLINE

BEARING, BALL, ANNULAThe contract involves the procurement of 25 units of a ball bearing, specifically the item identified by NSN/Part Number 3110-01-300-1103. The solicitation, titled "BEARING, BALL, ANNULA," was issued by the Defense Logistics Agency under the Department of Defense. The posting date for this solicitation was June 16, 2026, with a response deadline set for June 24, 2026. This contract is classified as a solicitation, but there is no indication of a set-aside type or specific NAICS code associated with it. The purchase request number is 7017199885, and the contract is intended to be executed by a federal organization. While detailed information about the place of performance and point of contact is not specified, the contract is accessible through the Defense Logistics Agency’s bidding system. This acquisition aims to fulfill departmental needs for the specified ball bearings within the stated timeframe.

Defense Logistics Agency

POSTED

DEADLINE

BEARING, WASHER, THRUThe contract pertains to the procurement of six units of a bearing washer thru, identified by the NSN/Part Number 3120-01-491-4708. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is aimed at acquiring these items through a formal response process. The solicitation number for this procurement is SPE4A6-26-T-94J6, with the posting date on June 16, 2026, and a response deadline set for June 24, 2026. This solicitation is designated as a federal procurement but does not specify any set-aside type or NAICS code. The contract’s place of performance and agency office location details are not provided in the available data. Interested parties are expected to follow the response procedures outlined in the solicitation, accessible via the provided DIBBS (Defense Internet Bid Board System) link for submission and further contract details.

Defense Logistics Agency

POSTED

DEADLINE

BEARING, SLEEVEThe contract involves the procurement of two sleeve bearings identified by NSN/Part Number 3120-01-075-1022. Issued by the Defense Logistics Agency under the Department of Defense, the solicitation number is SPE4A6-26-T-94A4. The solicitation was posted on June 16, 2026, and responses were due by June 24, 2026. This federal contract does not specify any set-aside type or related preferences, nor does it include a NAICS code, indicating it is open without designated small business or socio-economic restrictions. The contract details focus primarily on acquiring the specified quantity of sleeve bearings, with no particular location information provided for performance or office address. The solicitation was published and managed through the Defense Logistics Agency’s procurement system, emphasizing its role in supporting defense logistics needs. Key contact and performance location details remain unspecified.

Defense Logistics Agency

POSTED

DEADLINE

BEARING, SLEEVEThe contract involves the procurement of 12 units of bearing sleeves, identified by the NSN/Part Number 3120-00-300-7924. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 16, 2026, with a response deadline set for June 24, 2026. This procurement opportunity is designated under solicitation number SPE4A6-26-T-93X7 and is intended for federal organizations. While specific details such as the type of set-aside, NAICS code, and exact location for performance are not provided, the contract reflects a straightforward acquisition of these components by the Department of Defense. Interested vendors were directed to submit their responses through the official DLA procurement website within the set timeframe. The contract aims to support military and defense operations by ensuring the supply of these essential bearing sleeves.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract covers the procurement of 1,142 units of a bushing sleeve designated by NSN 3120-01-505-0246 and part number 66-9266-1 from The Boeing Company. The item is a critical application component requiring possible casting or forging processes, which may involve specialized tooling potentially not possessed by the government. Technical and quality requirements are governed by the Defense Logistics Agency’s (DLA) master list, with inspection and acceptance conducted at the origin site. Packaging and marking conform to military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for identification marking, with specific instructions to wrap each sleeve in neutral paper to prevent damage. The contract specifies strict adherence to DLA packaging requirements and includes instructions for handling and transportation to the DLA Distribution Depot located at Tinker Air Force Base, Oklahoma. The contract stipulates delivery within 179 days with an original required delivery date of February 21, 2026, and a need-by ship date of June 10, 2025. Pricing is based on a per-unit cost with no quantity variance allowed. Source and design control are maintained by Boeing, following their internal quality assurance procedures, and item unique identification is not required per customer request. The solicitation is managed by the Department of Defense’s ASC Commodities Division with the place of performance at Tinker AFB, and includes contact information for the primary point of contact for sourcing and technical assistance.

General Info

Procurement of 1,142 bushing sleeves from Boeing with strict DLA quality, packaging, and delivery requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-25-T-17MV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 7

Solicitation

Response DeadlineMay 12

Deadline has passed

Submission Closed

05/12/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Kameron Heningburg

contact@example.gov

+1 (555) 000-0000

Full Description

BUSHING,SLEEVE
BUSHING, SLEEVE
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION MAY APPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SOURCE / DESIGN CONTROLLED MATERIAL
BOEING COMPANY
CAGE 82918
P/N: 66-9266-1
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 82918 P/N 66-9266-1
IAW REFERENCE QAP 13873 QAP-B02
REVISION NR B DTD 12/11/2013
PART PIECE NUMBER:
SPE4A6-25-T-17MV
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://www.dla.mil/Portals/104/Documents/DLMS/eApplications/LogDataAdmin/ UnitofIssueandPurchaseUnit.xlsx
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7010328263 0001 EA 1,142.000
NSN/MATERIAL:3120015050246
DELIVERY (IN DAYS):0179
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:EA CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WRAP EACH SLEEVE IN NEUTRAL PAPER TO PREVENT CONTACT/DAMAGE.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:06/10/2025
SPE4A6-25-T-17MV
SECTION B
PR: 7010328263 PRLI: 0001 CONT’D
Original Required Delivery Date:02/21/2026
SPE4A6-25-T-17MV NSN/Part Number: 3120-01-505-0246 Quantity: 1,142 EA Purchase Request: 7010328263QTY: 1142 Delivery: 179 days ADO