This Award Notice opportunity from Department Of Defense was posted on October 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BUSHING, SLEEVE

Awarded

SPE4A6-26-T-35UDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

Pin Assemblies

Solicitation # pin-assemblies

Mercer Engineering Research Center is soliciting bids from qualified suppliers for the fabrication of precision ground pin assemblies. The required components feature diameters ranging from 0.155 to 3 inches and lengths between 3 and 10 inches. This opportunity is open to performance across all U.S. states and is specifically set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Interested parties must respond by November 13, 2026. The procurement falls under NAICS code 332721, and further technical details can be obtained by contacting Michael Lange. This solicitation is managed by the Mercer Engineering Research Center to ensure the acquisition of high-precision engineering components.

Mercer Engineering Research Center

POSTED

DEADLINE

Manufacture of Straight Headless Pins (MS16555-68)This subcontract involves the precision machining and manufacturing of 31 straight headless pins, identified by NSN 5315-01-353-3706, for the Department of Defense DLA Weapons Support ASC. The project requires strict adherence to TDP Rev A Gen 1 and NASM16555 Revision 4 standards using CNC machining, with a specific prohibition against the use of additive manufacturing. To ensure quality and compliance, the contractor must utilize ISO 9001 or SAE AS9003 inspection systems and employ MIL-STD-1916 or ASQ H1331 sampling methods. The work is categorized under NAICS code 332721 and is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture of Straight Headless Pins (NSN 5315-01-242-0898)This subcontract involves the manufacture of 953 precision straight, headless pins (NSN 5315-01-242-0898) for the DLA Weapons Support ASC Commodities Division. The contractor is required to machine and form the pins to DLA Master List dimensions using lathes, grinders, or cold-heading machinery, though the use of additive manufacturing is strictly prohibited. All finished products must be packaged according to MIL-STD-129 and undergo quality sampling in compliance with MIL-STD-1916 or ASQ H1331. To be eligible for this project, the contractor must hold US/Canada Joint Certification Program (JCP) certification and maintain ITAR/EAR approval. The work is associated with NAICS code 332721 and will be performed in Anniston. Interested parties must respond by November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacturing of Straight Headed Pins (NSN 5315-01-658-7014)This subcontract involves the precision manufacturing of 236 straight headed pins, identified by NSN 5315-01-658-7014, for the DLA Weapons Support ASC Commodities Division. The pins must be fabricated in accordance with technical standards NASM20392 and NASM5673, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Performance will take place at Robins Air Force Base. The project strictly requires the use of precision machining equipment and explicitly prohibits additive manufacturing. Additionally, all materials used in production must comply with the Buy American Act and the Berry Amendment. Interested parties must respond by November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacturing of Headless Shoulder PinsThis subcontract involves the precision manufacturing of 196 headless shoulder pins, identified as NSN 5315-00-445-4614, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must adhere to MIL-DTL-16232 requirements and utilize precision CNC machining. As part of the quality assurance process, the contractor is required to perform a First Article Test on two units and provide Certificates of Quality Compliance upon delivery. To be eligible, the manufacturer must maintain a quality system compliant with ISO 9001 or SAE AS9003 and hold certification under the US/Canada Joint Certification Program for export control. The project is categorized under NAICS code 332721, with the place of performance located in Barstow, California. Responses to this solicitation are due by November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Retaining Rings (NSN 5325008661471)This subcontract involves the manufacture and supply of 34 finished retaining rings, part number MS16632-4012, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced in accordance with specifications MS16632C and MIL-DTL-21248F, with final delivery designated for Tinker AFB. To ensure quality and security, the provider must maintain SAE AS9003 or ISO 9001 certification and demonstrate compliance with NIST SP 800-171. Additionally, the contract mandates strict adherence to NAVAIR Aircraft Launch and Recovery Equipment traceability standards for Critical Application Items.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Straight Headless Pins (MS16556-17)This subcontract involves the precision machining of 76 straight headless pins (MS16556-17) for the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere to NASM16556 Revision 3 specifications using CNC turning or grinding, with a strict prohibition on additive manufacturing. All deliverables must be finished, inspected, and packaged according to specific military and industry standards, including MIL-STD-1916 or ASQ H1331 for quality inspection, ASTM D3951 for packaging, and MIL-STD-129 for marking. The project requires full compliance with DFARS 252.204-7012 and falls under NAICS code 332721. Performance of the contract is centered in Jacksonville, Florida. Interested parties must respond by November 17, 2026, to provide the required quantity of inspected and packaged pins.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Quick Release Pins (NSN 5315-01-487-1961)This subcontract involves the manufacture of 45 precision quick release pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires fabrication according to NSN 5315-01-487-1961 specifications and the most current applicable part standards. Using precision machining to achieve strict aerospace and defense tolerances, the manufacturer must ensure zero non-conformance in alignment with MIL-STD-105/ASQ Z1.4 and adhere to MIL-STD-1916 for quality sampling. The contract is governed by the Buy American Act and falls under NAICS code 332721. Performance for this Department of Defense requirement will take place in Jacksonville, Florida. Interested parties must note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Screw Thread Inserts (NAS1130-4FL20)This subcontract involves the manufacture of 1,200 screw thread inserts, specifically part NAS1130-4FL20, for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The project requires precision machining and forming using CNC turning and threading equipment to meet National Aerospace Standard specifications. All delivered inserts must be fully inspected and certified, and the use of additive manufacturing is strictly prohibited. To qualify, the provider must hold SAE AS9003 or ISO 9001 certification and maintain compliance with DFARS 252.204-7012. The work is categorized under NAICS code 332721 and will be performed in New Cumberland. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining and Fabrication of Shear Bolts (NSN 5306-01-353-6112)This subcontract involves the precision machining, threading, and finishing of 5,451 shear bolts for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the bolts using CNC lathes in accordance with NAS6303 through NAS6320 and QAP 13873 standards. All components must meet Class 3A and 3B thread gages per SAE AS8879 or MIL-S-7742, and the final delivery must consist of fully finished and inspected shear bolts. To be eligible, the provider must hold ISO 9001 or SAE AS9003 certification, and the use of additive manufacturing is strictly prohibited. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332721. Interested parties must respond by November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Manufacture of Sleeve BushingsThis subcontract involves the precision machining and manufacture of 40 sleeve bushings for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. Production must strictly adhere to Basic Drawing 53711 7124790, Revision Nov 15, 2004, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Final deliverables must be packaged in compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain CMMC Level 2 certification and participate in the US/Canada Joint Certification Program to handle export-controlled data. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332721. The response deadline for this requirement is November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Wire Braid Supplier (NSN 6145007654280)This subcontract involves the supply of 6,900 feet of wire braid for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The material must be manufactured or sourced according to Basic CID A-A-59569D Revision D and delivered in continuous lengths of 100 feet per spool. Performance will take place at Tinker AFB. The supplier must ensure strict adherence to the Berry Amendment for domestic sourcing and comply with prohibitions regarding mercury and ozone-depleting chemicals. Additionally, the contractor is required to meet NIST SP 800-171 cybersecurity standards. Responses to this requirement are due by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 9 days

AI Contract Overview

Solicitation SPE4A6-26-T-35UD is issued by the DLA Aviation ASC Commodities Division for the procurement of 118 sleeve bushings, identified by NSN 3120-00-235-8071. The contract requires the delivery of these items to Robins AFB, Georgia, with a standard delivery window of 519 days and a need ship date of February 7, 2027. A critical requirement includes First Article Testing, where the contractor must deliver two units within 180 calendar days of the award for government approval. Inspection and acceptance will occur at the point of origin. The manufacturer must maintain a quality inspection system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract mandates compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while hazardous materials must be labeled per the Hazard Communication Standard. The government will utilize a HUBZone price evaluation preference for eligible certified concerns and will not evaluate offers utilizing additive manufacturing.

General Info

DLA Aviation seeks 118 sleeve bushings for Robins AFB by February 7, 2027.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$4,065

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Awardee

PRECI-MANUFACTURING, INCORPORATED

Award Issued Date

10/14/2026, 12:00:00 AM UTC

Documents

21 pages · rfq

High

award

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseAwarded

PostedSep 22

Solicitation

Notice updatedSep 22

The notice title changed. The notice description changed.

AwardedOct 14

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

NIYANA YARBER

contact@example.gov

+1 (555) 000-0000

Full Description

DLA award SPE4A627P1819 posted on DIBBS. Awardee: PRECI-MANUFACTURING, INCORPORATED (CAGE 66841) Total Contract Price: $4,065.00 Award Date: 10-14-2026 Solicitation: SPE4A6-26-T-35UD Line items: - BUSHING, SLEEVE (NSN/Part 3120002358071, PR 7017838809) - GOVERNMENT FIRST ARTICLE TEST (NSN/Part 0001S00000052)