Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BUSHING, SLEEVE

Active
SPE4A0-26-T-4006Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to a bushing, sleeve item with part number 6785340, revision C, manufactured by Rolls-Royce Corporation (CAGE 63005), and identified by NSN 3120-00-883-4612. The item is classified as a configuration control item and a critical application item, requiring strict adherence to the referenced drawing and technical specifications. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable clauses including configuration change management, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and packaging requirements aligned with MIL-STD-2073-1E and DLA standards. The item must be marked in accordance with MIL-STD-129 and MIL-STD-130N, though Unique Item Identification is not mandated per the service customer’s request. Packaging, labeling, and palletization must conform to specified DLA guidelines, with no special marking required. The contract specifies a quantity of 19 units to be delivered within five days of award, FOB origin, with zero variance allowed in the quantity. Acceptance and inspection occur at the point of origin, and the end delivery point is the Tainan Branch Warehouse No. 859-1 in Taiwan. The item is procured under solicitation SPE4A0-26-T-4006, with a required delivery date of December 15, 2025, and no FAT (Factory Acceptance Test) is required as updated per SAW changes. The purchase price is $19.00 per unit, totaling $361.00, and the order is funded under project 9AB TP 1. Transportation is managed via multiple freight forwarders as defined in DLA procedural notes, and all documentation must comply with the DFARS and DLA contractual clauses referenced throughout the document.

General Info

19 bushing sleeves, NSN 3120-00-883-4612, Rev C, FOB origin, delivery by Dec 15, 2025, $19/unit, Tainan, Taiwan.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4006.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING, SLEEVE
CONFIGURATION CONTROL ITEM IAW CITED DRAWING AND/OR PART NUMBER.
DOCUMENTATION REQUIREMENTS OF CLAUSE 52.211-9042 APPLY FOR
NEW OFFERORS NOT CITED HEREIN.
ITEM IDENTIFICATION IAW MIL-STD-130N, DTD 16-NOV-2012.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CONFIGURATION CONTROL ITEM
ROLLS ROYCE
CAGE: 63005
DWG: 6785340 LATEST REV C
P/N:6785340
ACCEPTABLE SOURCE(S):
ROLLS-ROYCE CORPORATION
CAGE: 63005
Update: FAT no longer required per updated SAW / 761. (FAT SHALL BE
SPE4A0-26-T-4006
SECTION B
PERFORMED IN THE PRESENCE OF THE COGNIZANT QAR.THE FAT RESULTS SHALL BE
SENT TO DLA AVIATION-FAWB FOR FINAL APPROVAL.)
CRITICAL APPLICATION ITEM
ROLLS-ROYCE CORPORATION 63005 P/N 6785340
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016700381 0001 EA 19.000
NSN/MATERIAL:3120008834612
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DTW700
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
SPE4A0-26-T-4006
SECTION B
PR: 7016700381 PRLI: 0001 CONT’D
MARKFOR
DTW700
PARTS-ATTACH GENERAL DEPOT (PAGD)
TAINAN BRANCH WAREHOUSE NO.859-1
NO 195 BAOREN RD. RENDE DISTRICT
TAINAN CITY, 717
TW
M/F: (TCN) PTW75V53363853
RDD:
PROJ: 9AB TP 1
SUPP ADD: DA4KMZ SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:12/15/2025
SPE4A0-26-T-4006 NSN/Part Number: 3120-00-883-4612 Quantity: 19 EA Purchase Request: 7016700381QTY: 19 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
Sleeve Bushing Manufacturing and SupplyThe contract involves the manufacture and supply of 28 military-specification sleeve bushings identified by NSN 3120-00-968-5612, requiring full compliance with defense standards for performance, materials, and quality. All units must be accompanied by properly compliant packaging and labeling that meet federal and military regulations, including accurate origin documentation and inspection protocols to verify adherence to sourcing and manufacturing requirements. The product is intended for delivery to Tinker Air Force Base, with the place of performance specified as 73145-8000. The solicitation is classified as a subcontract under NAICS code 332991, managed by the ASC Commodities Division of the Department of Defense, and the response deadline is set for July 30, 2026, with the opportunity posted on July 22, 2026. All bidders must ensure full compliance with defense supply chain directives and be prepared for rigorous inspection and certification processes prior to acceptance.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Small Business Prime Contractor Representation & ComplianceThis contract is a total small business set-aside under the SBA program, requiring the prime contractor to be a certified small business as defined by the Small Business Administration. The solicitation is exclusively open to small businesses seeking to serve as either the prime contractor or a supplier through designated set-aside channels, ensuring priority access for eligible small businesses in the defense supply chain. The NAICS code 332991 applies to other fabricated metal product manufacturing, indicating the scope involves specialized metal components or systems, likely for aviation or defense applications. The opportunity is managed by the Aviation Supply Chain ESOC Buys office under the Department of Defense, with performance required in Bremerton, Washington, at the 98314-5001 ZIP code. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, providing a limited window for interested small businesses to submit proposals. Compliance with small business representation requirements is mandatory, and all applicants must attest to their size and status in accordance with federal regulations. The contract is accessible through the DIBBS platform, and prospective bidders must ensure they meet all eligibility and certification criteria prior to submission.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Tapered Roller Bearing Supply (NSN 3110-01-510-0315)The contract calls for the supply of tapered roller bearings meeting military NSN 3110-01-510-0315 specifications, with strict adherence to domestic content requirements under DFARS 252.225-7016, ensuring that all manufacturing and materials originate entirely within the United States. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses classified under NAICS code 332991, which covers other fabricated metal product manufacturing. Performance is required at a designated location in Bremerton, Washington, with all deliveries and compliance documentation tied to the Department of Defense’s aviation supply chain needs. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, with the procurement managed through the DLA DIBBS platform under contract number SPE4A026T4002.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Precision Bearing Manufacturing and SupplyThe contract entails the manufacture and supply of thirteen units of plain rod end bearings with the National Stock Number 3120-00-541-0136, specifically engineered to comply with military specifications for safety-critical thread design and material composition. These components are essential for high-reliability applications where structural integrity and performance under stress are non-negotiable, and all units must meet stringent quality and durability standards established by defense requirements. The solicitation is issued as a subcontract under the NAICS code 332991, indicating a focus on other fabricated metal product manufacturing. The contract is managed by the ASC Commodities Division of the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, ZIP 73145-8000. Bidders must submit responses by July 30, 2026, following the posting date of July 22, 2026, with all details accessible via the official DIBBS platform. Compliance with military-grade specifications, timely delivery, and certification of material and threading authenticity are mandatory for award consideration.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
ROLLER, BEARINGThis contract is for the procurement of one roller bearing, NSN 3110-01-689-8553, under solicitation SPE4A6-26-T-09EG, with a delivery requirement of 20 days FOB destination. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, and the cost of components made in these regions must exceed 50% of the total bearing cost, as mandated by DFARS clause 252.225-7016. A contractor declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to do so will disqualify the offer. The item is subject to stringent technical and quality requirements referenced in the DLA Master List, including packaging, preservation, and marking standards per MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods must align with bearing type and closure, utilizing approved lubricants and controls as specified. Mercury and mercury-containing compounds are prohibited from direct contact with the bearing except in specified exempted applications, and portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. No item unique identification is required. Packaging must comply with DLA-specific requirements, including palletization and protective measures, and the contractor’s facility must meet quality assurance verification standards under MIL-DTL-197M. The solicitation may be canceled or held pending a waiver if no compliant bearings are offered, and all marking and documentation must adhere to prescribed government formats with no deviations permitted without approval.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, TAPEREDThe contract pertains to the procurement of two tapered roller bearings with NSN 3110-01-510-0315, subject to strict domestic sourcing requirements under DFARS 252.225-7016, mandating that each bearing be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all components—rolling elements, retainer, inner race, or outer race—originating from these regions. Contractors must submit a completed Declaration on the Domestic/Foreign Nature of Materials via the DLA Foreign Bearing website; failure to provide this document disqualifies the quote. The bearings must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E, including preservation per MIL-DTL-197M, which dictates protective lubrication and packaging methods based on bearing type and closure, and requires quality assurance adherence at the contractor’s facility. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except in specific exempted applications such as functional batteries, fluorescent lamps, or weapon systems, with portable devices containing mercury requiring shockproof design and a secondary containment barrier as defined by NAVSEA 5100-003D. Item Unique Identification is not required per the service customer’s request, and the items are to be delivered FOB origin within five days with no variance allowed in quantity. Inspection and acceptance occur at destination, and all marking must follow MIL-STD-129 with special codes as specified. The solicitation is a total small business set-aside under NAICS 332991, with a response deadline of July 30, 2026, and is issued by the Department of Defense’s Aviation Supply Chain ESO Buy Unit.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThis solicitation, identified as SPE4A6-26-T-09BS, is issued by the Defense Logistics Agency’s ASC Commodities Division for the procurement of 28 bushings, sleeves with NSN 3120-00-968-5612, with a total estimated value of $28.00. The delivery is required at Tinker AFB, Oklahoma, with a need ship date of January 17, 2027, and an original delivery deadline of May 22, 2027, under FOB destination terms. The solicitation explicitly excludes Fast Pay and requires offerors to submit quantity ranges due to the volatile and fluctuating nature of purchase requests, allowing flexibility in awarding without administrative delays, although this does not apply to Auto IDC. All quotes must be submitted electronically via DIBBS by the closing date of July 30, 2026. Offerors anticipating a delay in submission are encouraged to file a “No Bid” notice to prevent unnecessary follow-ups. Compliance with the Berry Amendment is mandatory, with a threshold lowered to $150,000, and any use of non-domestic materials requires explicit disclosure. The contract enforces strict adherence to the prohibition on covered telecommunications equipment and services under FAR 52.204-24 and DFARS 252.204-7016, and also prohibits the use of additive manufactured parts unless specifically approved. Packaging and marking must meet MIL-STD-2073-1E and MIL-STD-129 standards, including unit container type D3, intermediate container type E5, and preservation code “33 CLNG/DRY.” All items must be labeled with part number, CAGE codes, lot and serial numbers, and hazardous materials must be properly marked per 29 CFR 1910.1200 and other federal regulations. Inspection and acceptance occur at origin, requiring compliance with SAE AS9100 quality systems and RQ006 criteria. Vendors must register with DLA’s AMPS system within two months to access the Vendor Shipment Module and update their WebServices schema if applicable. Contractors must affirm representations regarding socioeconomic status, including small business, WOSB, EDWOSB, SDVOSB, or HUBZone eligibility, and if bidding as a joint venture, provide partner UEI and C
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract is for a single sleeve bearing with NSN 3120-01-701-7423 and part number 32-747-026, supplied by Engineered Coil Company under solicitation SPE4A6-26-T-09EH. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with all containers clearly marked and labeled per government specifications, and palletization must follow RP001 guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes not otherwise classified are treated as major with a 1.0 AQL. Physical identification of the bare item is mandatory under RQ017, and government identification must be removed from non-accepted supplies per RQ011. The item must be shipped using the fastest traceable means—parcel post is prohibited—and delivered to the designated U.S. Naval Station facility in National City, California. The original required delivery date is June 23, 2026, and procurement is managed by the Department of Defense under NAICS code 332991.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLIThis contract solicitation is for 73 cylindrical roller bearings identified by NSN 3110012165737 and part number 23048580, issued by the Department of Defense under solicitation SPE4A6-26-T-09BV. The bearings must be manufactured in the United States, its outlying areas, or Canada, with more than 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these locations, as mandated by DFARS Clause 252.225-7016. Contractors are required to submit a declaration affirming the domestic or foreign origin of materials, obtainable from the DLA Foreign Bearing website; failure to provide this documentation may disqualify the quote. If no qualifying offers are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. Delivery is required within five days FOB origin, with no quantity variance permitted. Inspection and acceptance occur at origin, and all packaging must comply with MIL-STD-2073-1E and MIL-DTL-197M, including preservation methods specific to bearing type and closure, proper marking in accordance with MIL-STD-129, and palletization as defined by DLA packaging requirements. The contract stipulates adherence to quality assurance verification procedures outlined in Section 4 of MIL-DTL-197M, and all technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation response deadline is July 30, 2026, and inquiries may be directed to Kameron Heningburg at DLA.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CUP, TAPERED ROLLERThe contract is for the procurement of nine units of a tapered roller cup, NSN 3110016537449, manufactured by Timken Corporation under part number LM120710-20629, with a total value of $81.00. Delivery is required within 228 days of the award, FOB Origin, with final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the contractor’s origin, and the item is classified as a critical application requiring strict adherence to military and defense standards. All bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the cost of all components originating from these regions, in compliance with DFARS 252.225-7016; contractors must submit a signed declaration of origin to qualify. Quality control follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sample lots unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Supply chain traceability documentation must be retained as mandated by DLA Directive C03, and preservation, packaging, and marking must conform to MIL-DTL-197M and MIL-STD-129, including special code ZZ markings. Packaging uses MIL-STD-2073-1E, with palletization per DLA’s RP001 requirements. Contractors must comply with mandatory clauses related to trafficking in persons, employment eligibility, sustainable products, cybersecurity safeguards, hazardous materials prohibitions, export control, and electronic payment submission via WAWF. No foreign sourcing waivers are anticipated unless the requirement remains unsatisfied, and failure to provide origin documentation will disqualify a bid. The contract incorporates deviations on multiple FAR and DFARS clauses, including cybersecurity, equal opportunity, and subcontracting requirements, all effective February 2026. Electronic submission through DIBBS and CFolders is mandatory, with a response deadline of July 30, 2026.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract is for a single sleeve bearing with NSN 3120-01-452-9123, issued under solicitation SPE4A6-26-T-09BY by the ASC Commodities Division of the Department of Defense. The item is required for delivery within 20 days of award, and responses are due by July 30, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, strictly prohibiting any disclosure to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled technical data, and only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and authorized access may receive it. The place of performance is Silverdale, Washington, and all packaging must comply with DLA requirements. Additionally, the contractor must be CMMC Level 2 certified, and the item must be physically marked in accordance with specified identification standards. Cybersecurity and physical marking requirements are binding, and failure to meet any of these conditions may result in noncompliance.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 484121
New
DIBBS
Logistics, FOB Origin Delivery, and WAWF Invoicing SupportThe contract requires coordination of domestic FOB origin shipments, ensuring compliance with MIL-STD-129 marking standards for all outgoing logistics. All invoices must be submitted through the Wide Area Workflow system to meet federal payment and documentation requirements. The work is categorized as a subcontract under NAICS code 484121, which corresponds to truck transportation, and is managed by the Aviation Supply Chain ESOC Buys office within the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and performance will occur across domestic locations without specified city or state restrictions. No set-aside classification is designated, and the contract is open to eligible subcontractors capable of handling end-to-end logistics and invoicing in alignment with military standards.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Level 2 ImplementationThe contract requires comprehensive support to achieve and maintain CMMC Level 2 compliance for the handling of controlled unclassified information, focusing on the development and implementation of a System Security Plan, a Plan of Action and Milestones, and full adherence to all NIST SP 800-171 security controls. This effort is critical for ensuring the protection of sensitive data within the defense supply chain and must be executed in alignment with Department of Defense cybersecurity requirements. The subcontract is scoped to include all necessary assessments, documentation, and remediation activities to meet CMMC Level 2 standards, with an emphasis on operational readiness and audit preparedness. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and falls under NAICS code 541512 for computer systems design services. It is issued under the Aviation Supply Chain ESOC Buys initiative within the Department of Defense, and performance is expected to support defense-related operations, though no specific location is designated. The work is classified as a subcontract and does not include a set-aside designation, making it open to any qualified vendor capable of delivering CMMC Level 2 compliance services without restriction based on business size or ownership type.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and SDS ComplianceThe contract requires full compliance with hazard communication standards for hazardous substances used in conductor materials and manufacturing processes, emphasizing accurate labeling and up-to-date Safety Data Sheet (SDS) documentation. All procedures must align with regulatory requirements to ensure safe handling, storage, and transport of hazardous materials throughout the supply chain, with particular attention to maintaining consistency and clarity in hazard information for personnel and downstream users. This subcontract, issued under NAICS code 541690 by the Department of Defense’s Aviation Supply Chain ESOC Buys division, is open for response until July 30, 2026, and pertains to activities conducted across unspecified locations within the U.S. The scope centers on technical oversight of chemical safety documentation and communication protocols, targeting contractors with expertise in industrial safety compliance and materials handling within aerospace or defense manufacturing contexts.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
High-Precision Electrical Conductor Manufacturing and SupplyThe contract calls for the manufacture and delivery of a single unit of a high-precision electrical conductor, identified by NSN 6150-01-281-4640, to meet strict military specifications covering material composition, dimensional tolerances, electrical conductivity, and packaging requirements. This component is essential for mission-critical aviation systems and must adhere to rigorous standards ensuring reliability under extreme operational conditions. The work is being procured as a subcontract under the Department of Defense’s Aviation Supply Chain ESOC Buys initiative, with performance expected to fulfill defense logistics needs without public solicitation or set-aside provisions. The opportunity was posted on July 22, 2026, with a firm response deadline of July 30, 2026, and is accessible through the DIBBS procurement portal. Though no specific location for performance or point of contact is provided, the procurement falls under NAICS code 335999 for Other Electrical Equipment and Component Manufacturing, indicating specialized electrical manufacturing capabilities are required. All deliverables must satisfy exacting military quality benchmarks, and the successful subcontractor will be responsible for full compliance with technical and packaging protocols to ensure seamless integration into defense infrastructure.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811411
New
DIBBS
Barcoding and Item Marking ComplianceThe contract requires the application of UPCI and Data Matrix barcodes along with direct part markings to packages and bare items in strict compliance with MIL-STD-129 and RQ017 standards to ensure federal item identification and full traceability throughout the supply chain. This work is critical for meeting Department of Defense requirements for accurate, scannable, and durable markings that support inventory management, logistics, and operational readiness. All markings must be legible, permanent, and properly formatted to align with government-mandated specifications for serialization and data encoding. The contract is classified as a subcontract under NAICS code 811411 and is issued by the Aviation Supply Chain ESOC Buys division of the Department of Defense. Performance is to be carried out at a specified location in Chesapeake, Virginia, with a zip code of 23320. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026. No set aside designation is specified, and the contract is accessible through the DIBBS portal for interested subcontractors to review detailed requirements and submit proposals.
Home and Garden Equipment Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military-Grade Palletization and Unit PackingThe contract requires precise palletization and unit packing of military components in strict accordance with DLA RP001 standards, utilizing B3, E5, and M containers under controlled dry climate conditions and preservation method 33 to ensure long-term integrity and readiness. All work must adhere to the rigorous environmental and procedural requirements mandated for defense logistics, ensuring components remain protected from moisture, corrosion, and degradation during storage and transit. The performance location is firmly established in Chesapeake, Virginia, with a zip code of 23320, indicating the operational and logistical hub for this activity. This is a subcontract under the Department of Defense’s Aviation Supply Chain ESOC Buys organization, classified under NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 22, 2026, with a firm deadline for responses on July 30, 2026, indicating a compressed timeline for qualified subcontractors to submit proposals. The requirement is focused on specialized packaging expertise for defense-grade equipment, demanding proven compliance with military preservation protocols and the ability to scale operations in alignment with supply chain demands. All submissions must be made through the designated DIBBS platform, and contractors must demonstrate capacity to maintain environmental controls and documentation compliance throughout the packing process.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Oxygen-Clean Packaging ServicesThe contract requires specialized oxygen-clean packaging services compliant with IP042 and MIL-STD-2073-1E standards for components sensitive to contamination, where the presence of particulates, oils, or moisture could pose oxidation or combustion hazards. All packaging must be performed in a controlled environment to ensure absolute cleanliness and prevent any introduction of contaminants that could compromise operational safety, particularly in aerospace or defense systems. The work must adhere strictly to the prescribed technical procedures for cleaning, handling, and sealing components to maintain integrity through storage and transit. This subcontract is issued under NAICS code 332999 for other fabricated metal product manufacturing and is managed by the Aviation Supply Chain ESOC Buys organization within the Department of Defense. The place of performance is designated as Chesapeake, Virginia, with a zip code of 23320. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, providing a limited window for qualified vendors to submit proposals. Participation requires the capability to meet military-grade contamination control standards and access to accredited cleanroom or controlled facility environments capable of executing oxygen-clean protocols without deviation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Hazardous and Radioactive Materials Packaging and LabelingThe contract requires comprehensive packaging, labeling, and marking services for hazardous and radioactive materials in strict alignment with federal and military standards, including Hazard Communication, MIL-STD-129, and DFARS requirements. The work demands adherence to precise regulatory frameworks to ensure safe handling, transport, and storage of dangerous goods, with a focus on compliance, accuracy, and traceability throughout the supply chain. All activities must meet the rigorous oversight expected by the Department of Defense and support operational readiness by ensuring materials are properly identified and documented before distribution. This subcontract is solicited under the NAICS code 561910 for other support services and is issued by the Aviation Supply Chain ESOC Buys office within the Department of Defense. The place of performance is specified as Chesapeake, Virginia, with a zip code of 23320, indicating the physical location where the services must be executed. The proposal must be submitted by the response deadline of July 30, 2026, and the solicitation was posted on July 22, 2026, providing a narrow window for interested parties to prepare and deliver compliant responses. The contract does not specify a set-aside designation or point of contact, suggesting a standard competitive procurement process open to qualified subcontractors.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493130
New
DIBBS
DLA Packaging & Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services for bearings in strict accordance with DLA standards, specifically MIL-STD-129 and MIL-STD-2073-1E, ensuring all items meet federal defense supply chain requirements for handling, storage, and identification. The work must be performed to support the Aviation Supply Chain ESOC Buys unit under the Department of Defense, with performance located in Bremerton, Washington, 98314-5001, and delivery timelines aligned with the solicitation's response deadline of July 30, 2026. This subcontract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, classified under NAICS code 493130 for warehousing and storage, indicating the focus is on logistics and preparation services rather than manufacturing. The opportunity is open for qualified small business contractors to submit proposals by the stated deadline, with the requirement to adhere to all military packaging specifications and documentation standards to ensure full compliance with defense logistics protocols throughout the supply chain.
Farm Product Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Documentation ServicesThe contract entails the preparation and ongoing maintenance of Safety Data Sheets and hazard labels for items containing hazardous materials, ensuring full compliance with OSHA and Department of Defense standards. All documentation must accurately reflect the chemical composition, potential health and physical hazards, and appropriate handling and emergency response procedures as required by federal regulations. The work is specifically scoped to support defense-related supply chain operations and must be performed in accordance with the strict regulatory framework governing hazardous materials handling within military logistics. This is a small business set-aside subcontract under NAICS code 541690, exclusively available to small businesses as defined by the SBA. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026, and the place of performance is designated as Bremerton, Washington, ZIP code 98314-5001. The contracting activity falls under the Department of Defense’s Aviation Supply Chain ESOC Buys organization, and the work is critical to ensuring safe material handling across defense systems. Contractors must demonstrate proven capability in regulatory compliance documentation and be prepared to meet rigorous quality and timeliness standards for hazard communication across a dynamic operational environment.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details