C--A&E Replace Water Mains & Valves, Project No. 542-19-106

ACQUISITION INFORMATION: PROJECT NO. 542-19-106, REPLACE WATER MAINS & VALVES, PHASE 1 The VA Medical Center (CVAMC) in Coatesville, PA is seeking professional Architect and Engineering (A&E) services for Project No. 542-19-106, REPLACE WATER MAINS & VALVES, PHASE 1. This announcement is being issued in accordance with the Selection of Architects and Engineering firms (Public Law 92-582) and implemented in the Federal Acquisitions Regulations (FAR) Part 36. Architectural and Engineering (A&E) firms permitted by law to practice the professions of architecture or engineering are requested to send two copies of an SF 330 (8/2016 Edition) and CD from qualified and eligible firms classified as 100% SERVICE DISABLED VETERAN OWNED SMALL BUSINESS CONCERNS. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This is not a Request for Proposal and an award will not be made with this announcement. This announcement is a request for SF 330s from qualified firms that meet the professional and set aside requirements listed in this announcement. GENERAL SCOPE OF WORK: The consultant shall provide all architectural and engineering services as defined to accomplish complete contract drawings, specifications, technical reports and cost estimates for the scope of work. Scope of Work: This project will install new water mains and valves, and new service feeds to each of the buildings and fire hydrants to the extent that budget allows. The new mains and service feeds will be independent of the existing mains and service feeds, and will be cross tied as appropriate to the existing system. The new domestic water distribution system must be designed with the ability to isolate any leak and still be able to feed domestic water to all buildings and hydrants not otherwise affected directly by the leak. The project must consider storm water management and erosion control, and include all required permitting and any associated drawing revisions. The design must include full subsurface investigation to minimize potential construction period change orders. The project includes repair of any pavement or walkways, and repair of any grounds, damaged by the construction activities. The project includes removal of any trees impacting the construction efforts and the planting of new trees as appropriate. The A/E shall complete the subsurface investigation and develop options for routing of the new distribution, and must keep the VA COR abreast of all developments and assumptions during this process. In the Schematic Design submission, the A/E shall provide options and recommendations for the new domestic water distribution routing, along with pricing, so that the extent of the new distribution may be matched to the construction budget, with identifiable deduct alternates. The scope of work includes but is not limited to the following: Coordination with appropriate VA staff through the COR to ensure that all VA services are maintained through construction. Re-landscape any existing landscaping damaged or removed during construction activities such that the final conditions match or improve upon the pre-construction landscape conditions. (The construction contractor shall photograph all areas of the CVAMC campus to be affected by construction activities, equipment, vehicles or materials staging prior to commencement of such activities.) Provide new materials as required. Patch all surfaces and finishes where existing surfaces and finishes are damaged by the construction and removal activities. Instruct designated VAMC staff in the new distribution system layout and proper operation and isolation of the new system. All construction activities shall comply with OSHA requirements. The Following Investigative Work shall also be included Within the Scope of this Project: Perform a Code analysis to ensure that the applicable Codes are being applied. Provide any civil, structural, architectural, electrical and mechanical and underground utility investigative work of existing systems necessary to insure the accuracy of your design. Prepare any measured drawings of existing systems or facility required to insure the accuracy of your design. Take digital photos of site major features and connection points. Digital format must be compatible with VA software. VAMC Coatesville photo ID badges are required to be worn by all A/E personnel during all project site visits. Other: Complete review and analysis of contractor's project cost proposals. The A/E shall check Government furnished and/or the Construction Contractor's shop drawings, detail drawings, schedules, descriptive literature and samples, testing labor atory reports, field test data and review the color, texture and suitability of materials for conformity with the design concept and construction documents. The A/E shall recommend approval, disapproval, or other suitable disposition. The A/E shall evaluate the submittals with reference to any companion submittals that constitute a system. When necessary, the A/E shall, through the Contracting Officer's Technical Representative, request the Contractor to submit related components of a system before acting on a single component. The A/E may be required to hold joint reviews with the VA technical staff on complicated system submittals. The A/E shall notify the Contracting Officer's Technical Representative in writing of any and all deviations from the requirements of the construction documents that he has found in the Construction Contractor's submittals. Such responsibility shall be carried out with reasonable promptness as to cause no delay. Site visits as required. Include ten (10) full-day visits; eight (8) hours each for budget purposes. (Please include the price for additional site visits should they be desired.) Reproduction costs Include the cost of reproducing contract documents (drawings and specifications) and delivery to the VA Contracting Officer. Specifications are to be spiral-bound (as made by GPC) with a clear plastic front cover and a back cover. Infection Control: The A/E shall incorporate into their documents engineering asepsis controls. The A/E shall coordinate with the VA s Infection Control Practitioner to determine the infection control measures required during the projects construction period. Additionally, the "Pre-Construction Risk Assessment, (PCRA)", shall be completed and incorporated into the final construction documents. The A/E shall update all AutoCAD Drawings to reflect as-built conditions, based upon mark-ups provided by the Contractor. The A/E shall provide to the COR a complete set of mylar as-built drawings and compact disks (CD) of electronic contract documents as described in Article III, CONSTRUCTION PERIOD SERVICE REQUIREMENTS. Drawing Requirements: Submitted drawings must be completed in accordance with VA Design and Construction Procedures. Media submission CD compact disk requirements include: Drawings in AutoCAD 2014 format: font selection limited to "Bold.SHX" and "ROMANS.SHX", menu must be set to "ACAD.MNU" and drawing must be layered and named in accordance with approved VA layering guidelines. II. TIME SCHEDULE REVIEW AND SUBMITTAL REQUIREMENTS: This article specifies documents and contents required to be submitted by the A/E consultant to the Department of Veterans Affairs (VA) for each scheduled review and the due dates for each submission. Available reference materials pertinent to the design and submittal requirements are indicated in Article IV, AVAILABLE REFERENCE MATERIALS. The A/E shall complete the design within 180 days. Schematic Documents Review The objective of this submission is to provide the VA with an overview of the A/E design approach, to present any fundamental design options for consideration and selection by the VA, and to ensure that the design development of the project is properly focused, aligned with VA requirements and within the scope of the Contract. Provide complete sets of documents as outlined and in quantities as required. 50% Construction Documents Review The objective of this submission is to provide the VA with project documents in sufficient detail to evaluate the design, its adherence to the project scope and the A/E's ability to interpret the design criteria and prepare biddable documents. Provide complete sets of documents as outlined and in quantities as required. 95% Construction Documents Review The objective of this submission is to provide the VA with construction documents which are technically complete, in the proper format, biddable, constructible, coordinated between all disciplines and adhering to the project scope for final review by the VA. Provide complete sets of documents as outlined and in quantities as required. Final Submission of Construction Documents Provide complete sets of documents as outlined and in quantities as required. III. CONSTRUCTION PERIOD SERVICE REQUIREMENTS: Review of Contractor's Cost Proposal: Review and evaluate cost proposals submitted by selected construction contractor(s) prior to contract award when requested by the Contracting Officer. The A/E shall provide written analysis of the cost proposal(s), specifically citing areas of excess cost (labor, materials, etc.) or omissions of key requirements of the contract. The A/E should reference and compare costs for items as listed in the A/E's final cost estimate. Review of Submittals: The A/E shall review all submittals (material submittals, shop drawings and test reports (if required), etc.) and return them to the Contracting Officer's Technical Representative (COR) within 10 working days, or as otherwise required by the Contract. Review of Change Order Requests and Requests for Information (RFI): The A/E shall respond promptly to all Change Order Requests and Requests for Information as required by the Contract. Site Visits: The A/E shall provide up to ten (10) full-days; eight (8) hours each. Construction Phase site visits including the final inspection when requested by the COR. (Please include price for additional site visits should they be desired by the Resident Engineer). Written meeting minutes and recommendations shall be provided to the VA by the COB (Close of Business) on the following workday. Electronic-mail copies of digital photographs from site visits when requested by the COR. "As-Built" Document Requirements: Drawings: The A/E shall update all AutoCAD Drawings to reflect as-built conditions, based upon mark-ups provided by the Contractor. The A/E shall provide a complete set of mylar as-built drawings and three (3) compact disks (CD) to the COR, each containing a complete set of as-built drawings in Adobe PDF format and a copy of all of the AutoCAD as-built files with "xrefs" bound and A/E title block information erased per A/E requirements. Specifications: The A/E shall update the complete set of specifications to reflect all changes issued. The A/E shall provide two compact disks (CD) to the COR, each containing this complete set of the final specifications in Adobe PDF format. IV. AVAILABLE REFERENCE MATERIALS: Prints of the station site, utility drawings and building floor plans may or may not be available. The accuracies of these drawings are not guaranteed and shall be used only for general information. Actual conditions must be field verified by the A/E. A/E Submission Instructions for Minor and NRM Construction Program: Program Guide PG-18-15 Volume C, November 2008 available on-line at https://www.cfm.va.gov/til/aeDesSubReq.asp. Otherwise, navigate as follows: Office of Construction and Facility Management Web Site (https://www.cfm.va.gov/) Tech Info Library (from menu on right side of web page) "A/E Submission & Review" link under "TIL NAVIGATION" section and the TIL CATALOG index of resources heading on the right side of the web page "Volume C - Minor and NRM Projects" link under "PG-18-15 A/E Submission Requirements" heading in the middle of the web page. Additionally, the A/E Submission Requirements for VA Medical Center Major New Facilities, Additions, & Renovations spreadsheet: Program Guide PG-18-15 Volume B, March 1, 2017, has good information regarding the levels of documentation suitable for each submission. It is available on-line from the same web page. Download from the Technical Information Library (TIL) copies of the Master Construction Specifications list and unedited copies of each specification section applicable to this project as determined by the A/E. The VA unedited master Specifications are available on line from the Technical Information Library at https://www.cfm.va.gov/til/spec.asp. Otherwise navigate as follows: Office of Construction and Facility Management Web Site (http://www.cfm.va.gov/) Tech Info Library (from menu on right side of web page) "PG-18-1 Master Construction Specifications" link under the "VA Numbered Standards for Construction" heading near the bottom of the web page Drawing Requirements Overview: Refer to "Topic 02 Drawings" from the VA Program Guide PG-18-3, available on line in the TIL (Technical Information Library) at http://www.cfm.va.gov/TIL/cPro.asp. Otherwise navigate as follows: Office of Construction and Facility Management Web Site (https://www.cfm.va.gov/) Tech Info Library (from menu on right side of web page) "PG-18-3 Design and Construction Procedures" link under the "VA Numbered Standards for Construction" heading near the bottom of the web page "Topic 02 Drawings" link from the list on the web page CAD deliverables must conform to the current VA Drawing Deliverable Requirements (DDR), available on line at https://www.cfm.va.gov/til/bim/DwgDelivRqmts.pdf. Otherwise navigate as follows: Office of Construction and Facility Management Web Site (https://www.cfm.va.gov/) Tech Info Library (from menu on right side of web page) "PG-18-4 Standard Details and CAD Standards" link under the "VA Numbered Standards for Construction" heading near the bottom of the web page "VA CAD Standards" link from the list of Divisions in the middle of the web page (and above the links to Standard Details) VA Drawing Deliverables (DDR) link under the heading VA BIM Standard Other relevant information is available on the web page, as well. One copy of the legal documents and bidding forms applicable to this project. Contact Acquisitions Management Service (AMS) Contracting Officer as listed in the solicitation. Cost Estimates: Review the Manual for Preparation of Cost Estimates & Related Documents for VA Facilities, available from the following link: https://www.cfm.va.gov/til/dManual/dmCost.pdf. Otherwise navigate as follows: Office of Construction and Facility Management (CFM) web site (https://www.cfm.va.gov/) Click on Cost Estimating link listed under the TIL Quick Links heading in the middle of the web page) "Manual for Preparation of Cost Estimates" link in the middle of the web page under the Cost Estimating heading. Labor Rates: Current Construction Wage Rate Requirements labor rates are available through the Contracting Officer. Energy, Water Efficiency and Renewable Energy: The A/E shall specify in the construction specifications the use of the maximum practicable amount of recovered materials consistent with the performance requirements, availability, price reasonableness, and cost-effectiveness. The A/E shall also consider energy conservation, pollution prevention, and waste reduction to the maximum extent practicable in developing the construction design specifications. Energy-consuming products must comply with the requirements of 42 U.S.C. § 8259b. When acquiring energy-consuming products listed in the ENERGY STAR® Program or Federal Energy Management Program (FEMP): Agencies shall purchase ENERGY STAR® or FEMP-designated products; and For products that consume power in a standby mode and are listed on FEMP s Low Standby Power Devices product listing, agencies shall Purchase items which meet FEMP s standby power wattage recommendation or document the reason for not purchasing such items; or If FEMP has listed a product without a corresponding wattage recommendation, purchase items which use no more than one watt in their standby power consuming mode. When it is impracticable to meet the maximum one-watt requirement, agencies shall purchase items with the lowest standby wattage practicable. Information is available via the Internet about ENERGY STAR® at https://www.energystar.gov/products; and FEMP at https://www.energy.gov/eere/femp/search-energy-efficient-products. V. Evaluation Criteria: The A&E selection criteria for this acquisition is listed in descending order of importance. Sub-elements are of equal importance. Team Proposed for This Project Background of Personnel Project manager Other key personnel Consultants Previous Experience of Proposed Team Project experience Water Mains, Underground Utilities, Hospital, VAMC At least three similar projects in size and scope and specialization Proposed Design Approach Primary factors of consideration Project specific approach Proposed Management Plan Design phase Construction phase Client communication Project Control Techniques planned to control quality of design and documentation Techniques planned to control the schedule and estimated construction costs Personnel responsible for schedule and cost control Estimating Effectiveness Five example projects Five most recently bid projects Construction Period Services Experience Change Orders Cost Percentages (of total construction budget) Organization and Turn-around time for RFI's and Submittals VI. Contract Award Procedure: Interested A&E firms shall submit two (2) copies of SF330 (8/2016 Edition) and CD with appropriate documentation and information to Elizabeth Morin, Contracting Officer (542/90C), VAMC, 1400 Black Horse Hill Road, Building 16, Coatesville, PA 19320 by 10:00 AM, EST, February 21, 2019. A&E firms shall be registered at www.sam.gov and www.vetbiz.gov. If available, please include your firm's VetBiz.gov SDVOSB status verification. Failure of a proposed SDVOSB A&E firm to be certified by the CVE at the time of the SF330 is submitted shall result in elimination from further consideration for award. Following an evaluation of the qualifications and performance data submitted, three or more firms considered to be the most highly qualified firms to provide the type of services required will be chosen for interviews. After interviews, the most highly qualified firm will be issued the solicitation and requested to submit a proposal. The Government will not pay, nor reimburse, any costs associated with responding to this announcement. The Government is under no obligation to award a contract as a result of this announcement. A&E firms will be selected based on demonstrated competence and qualifications for the required work. NAICS 541330 and size standard $15M apply. The award of a Firm Fixed-Price contract is contemplated and is subject to the availability of FY 19 funding. Magnitude of construction project estimate is between $2,000,000 and $5,000,000. (End of Document)