Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

C/KC-130 Various (Kinston): FUEL SYSTEM PRESERVATION CART P/N: S-277LM

Awarded

N6833526P1107Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, specifically the Navair Warfare Ctr Aircraft Division, has awarded a sole-source contract to Maney Aircraft, Inc for the procurement of a fuel system preservation cart, part number S-277LM, intended for C/KC-130 aircraft in Kinston. This acquisition was conducted under the statutory authority of Title 10, U.S.C. 3204(a)(1) and FAR 6.302-1(a)(2)(iii), as the government determined that Maney Aircraft, Inc is the only responsible source capable of satisfying the agency's specific requirements. The contract, identified by solicitation number N6833526P1107, falls under NAICS code 334514. While the contracting office is located at Joint Base MDL in New Jersey, the place of performance for this award is situated in Ontario, California. The procurement was processed without a set-aside designation.

General Info

DoD awarded Maney Aircraft a sole-source contract for C/KC-130 fuel preservation carts.

Agency

Department Of Defense → Navair Warfare Ctr Aircraft Division

Contract Value

$134,000

NAICS

334514 - Totalizing Fluid Meter and Counting Device Manufacturing

Place of Performance

Ontario, CA, 91761, USA

Set-Aside

NONE

Awardee

MANEY AIRCRAFT, INC.

Award Issued Date

07/07/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 7

Award Notice

AwardedJul 7

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Contacts1 person available

OfficeJOINT BASE MDL, NJ, 08733, USA

Organization / AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Office AddressJOINT BASE MDL, NJ, 08733, USA

Contacts

Duane Hines

contact@example.gov

Full Description

Show more

This acquisition is awarded to Maney Aircraft, Inc CAGE: 10000 on a sole-source basis under the statutory authority of Title 10, U.S.C. 3204(a)(1) as implemented by the Federal Acquisition Regulation (FAR) 6.302-1(a)(2)(iii), only one responsible source and no other supplies or services will satisfy the agency requirements.

Similar Contracts

Same NAICS industry code

TEST SET, RELAY

Solicitation # SPE7M1-27-T-0473

Solicitation SPE7M1-27-T-0473 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one relay test set, NSN 6625017011760, part number SMRT46-30P1G0A3S1 from AVO Multi-Amp Corp. This acquisition is specifically set aside for certified Women-Owned Small Business (WOSB) concerns. The required delivery date is October 6, 2026, with a delivery lead time of 20 days after order. The item is to be delivered FOB Destination to the US Army Prime Power School at Fort Leonard Wood, Missouri, with the bulk break point located at the USALCRTR Fort Leonard Wood Trans Freight Branch. The contract mandates strict adherence to technical and quality requirements RA001, RP001, and RQ011, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and represent that they will not provide covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

INDICATOR, LIQUID QU

Solicitation # SPE4A6-27-T-5184

Solicitation SPE4A6-27-T-5184 is a fixed-price contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of one liquid quantity indicator. The item is identified as a Commercial Off The Shelf product, specifically Brunswick Corp part number 8M0052845, with NSN 6680016516759. Delivery is required within five days after order, with the destination for both inspection and acceptance located at the Distribution Management Office in Albany, Georgia. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Additionally, the contract mandates compliance with the Buy American Act and prohibits the use of mercury compounds in preservation and packaging.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

TEST SET, BATTERY

Solicitation # SPE7M2-27-T-0268

Solicitation SPE7M2-27-T-0268 is a fixed-price procurement issued by the DLA Weapons Support Nuclear Reactor Program for the acquisition of 16 battery test sets (NSN 6625-01-737-4917). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with an original required delivery date of July 12, 2027, and a delivery period of 106 days. Inspection and acceptance will occur at the destination. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 30, 2026. The contract includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Environmental restrictions prohibit the intentional addition of mercury, except for functional use in batteries. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Additionally, the solicitation incorporates Buy American Act requirements and offers price evaluation preferences for certified HUBZone small businesses.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SHOP EQUIPMENT, UTILITY

Solicitation # SPE7M4-27-T-0408

Solicitation SPE7M4-27-T-0408, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 14 kits of general purpose utility shop equipment, specifically Winzer Corporation part number C9411145 (NSN 4940-01-633-1550). The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of March 1, 2027, and an original required delivery date of October 31, 2027. Terms are FOB Origin for offer submission, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with specific packaging according to ASTM D3951. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Notably, the government will not evaluate or award offers containing items produced via additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

HYDRAULIC SERVICING UN

Solicitation # SPE7L3-27-T-0363

Solicitation SPE7L3-27-T-0363 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of two Hydraulic Servicing Units. The required items are identified by NSN 4910016025069 and part number 080026-100 from Hydraulics International, Inc. Delivery is required within 184 days after order, with a need ship date of April 22, 2027, and an original required delivery date of October 31, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled per MIL-STD-129, and palletization must follow RP001 requirements. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals, and the contractor must remove government identification from any non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

METER KIT, FLOW RATE IN

Solicitation # SPE4A1-27-T-0170

Solicitation SPE4A1-27-T-0170 is a fixed-price contract issued by the Defense Logistics Agency (DLA) Weapons Support Aviation Supply Chain for the procurement of one flow rate indicating meter kit, identified by NSN 6680-01-737-7180. The delivery is required within 20 days after receipt of order, with the shipping destination being the Naval Station Supply Department in Mayport, Florida. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1 Appendix D for kit packaging and MIL-STD-129 for marking and bar-coding. All kit components must be housed in a single cushioned box accompanied by a detailed contents list of NSNs and part numbers. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Eligibility for award requires an approved US/Canada Joint Certification Program (JCP) certification due to the export-controlled nature of the technical data, which is subject to ITAR or EAR regulations. The solicitation also emphasizes compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Price is a primary evaluation factor, with a specific preference provided to certified HUBZone small business concerns. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Supply of Special Scale Meters (NSN 6625014564423)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

66--METER,SPECIAL SCALE

Solicitation # SPE7M1-27-T-1091

Solicitation SPE7M1-27-T-1091 is a total small business set-aside request for quote issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 86 units of special scale meters, identified by NSN 6625014564423. The contract is a fixed-price agreement with a delivery period of 51 days, specifying a need ship date of March 13, 2024, and an original required delivery date of May 9, 2024. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with terms set as FOB Origin under the First Destination Transportation program, though inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 334514 and includes strict adherence to DLA packaging requirements via RP001, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Technical and quality requirements are incorporated by reference through the DLA Master List. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and specific hazardous material labeling per 29 CFR 1910.1200. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

10--DEPLOYMENT KIT

Solicitation # SPE7LX-27-U-0257

Solicitation SPE7LX-27-U-0257 is a total small business set-aside request for quotes issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of Deployment Kits (NSN 1005016299733). This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches 350,000.00 dollars. The estimated annual demand is 11 kits, with a guaranteed minimum quantity of one and an estimated two orders per year. The minimum delivery order quantity is two kits, and the required delivery timeline is 62 days after receipt of order. Items will be shipped to various CONUS and OCONUS DLA Depots, with inspection and acceptance occurring at the destination. The contract requires strict adherence to packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with DLA Master List requirements taking precedence. Palletization must follow RP001 standards. All hazardous materials must be labeled according to the Hazard Communication Standard, and corresponding Material Safety Data Sheets must be submitted prior to award. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and comply with the Buy American Act and other domestic material restrictions. Evaluation for award will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

Supply of Test Adapters (NSN 6625016830656)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the manufacture or procurement of 57 test adapters under NSN 6625016830656. The project is designated as a Total Small Business Set-Aside under NAICS code 334514, with performance taking place in New Cumberland, Pennsylvania. The contractor must ensure all units comply with MIL-STD-129 for marking and storage, while adhering to the Buy American Act and DFARS 252.204-7012 standards. The final deliverable consists of 57 properly marked and packaged test adapters delivered according to the specified requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Solenoid Valves (NSN 4810004500491)This subcontract involves the supply of 11 solenoid valves, identified by NSN 4810004500491, for prime contractors delivering to the DLA Weapons Support Maritime Hardware/Electrical agency. The project is a total small business set-aside under NAICS code 334514 and is managed by the Department of Defense through the DDSP New Cumberland Facility. Performance will take place in New Cumberland, Pennsylvania. The contractor must ensure all units are compliant with MIL-STD-129 for marking and shipment and adhere to the First Destination Transportation program requirements. Additionally, the provider is responsible for submitting Safety Data Sheets for any hazardous materials in accordance with FAR 52.223-3. The response deadline for this opportunity is October 29, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PARTS KIT, FLOW RATE

Solicitation # SPE4A5-27-T-1417

Solicitation SPE4A5-27-T-1417 is a fixed-price supply contract issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the acquisition of one flow rate parts kit, identified by NSN 6680-01-732-6536. The kit is to be delivered to the USS WICHITA LCS 13 with a required delivery date of August 6, 2026, and a delivery lead time of 20 days. Shipping must be conducted via the fastest traceable means, and parcel post is strictly prohibited. Inspection and acceptance will take place at the origin, with the manufacturer's quality system required to comply with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1 Appendix D for kits, requiring all components to be placed in a single, cushioned box containing a detailed contents list of NSNs, part numbers, and quantities. Marking and bar-coding must comply with MIL-STD-129, using special marking code ZZ. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. Item Unique Identification is not required for this procurement, and the material has no shelf life requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

Shipboard Power Systems and Mechanical Interface Analysis

Engineering Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

SE Engineering Drawing and Documentation Services

Surveying and Mapping (except Geophysical) Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

RM&S and Environmental Compliance Consulting

Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

SE/ALRE Prototype Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

SE/ALRE Design and Development Engineering

Engineering Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Engineering and Technical Services for Support Equipment Department at NAWCADLKE

Solicitation # N6833527R1000

Solicitation N6833527R1000 is a total small business set-aside for comprehensive mechanical and electrical engineering and technical services to support the Support Equipment Department at the Naval Air Warfare Center Aircraft Division Lakehurst, New Jersey. The scope of work includes the design, development, acquisition, evaluation, sustainment, and logistics of support equipment and aircraft launch and recovery equipment across organizational, intermediate, and depot-level maintenance environments. Technical activities involve utilizing industry-standard design tools such as AutoCAD and LABVIEW, performing avionics fault detection, managing data in platforms like AUTOSERD and SERMIS, and participating in critical design and system engineering reviews. The contract is structured with a five-year period of performance, consisting of one base year and four option years, with a maximum duration of five years and six months. The government will award one task order based on a best-value tradeoff analysis, where technical and past performance factors are significantly more important than cost. Technical evaluation focuses on the understanding of the work and key personnel resumes, the latter of which is a pass/fail requirement that can render a proposal unawardable. A material condition for award is the possession of CMMC Level 2 self-certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to strict cybersecurity standards, including NIST SP 800-171. Proposals must be submitted electronically via the PIEE portal by December 3, 2026, following specific volume and page limit constraints.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

F/A-18 Fuel Pressure Gage Kit, P/N: 3867AS2060-1

Solicitation # N68335-27-Q-1005

The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm Fixed Price contract to manufacture and assemble seventy Fuel Pressure Gage Kits (Part Number 3867AS2060-1) in support of the F/A-18 E/F program. This procurement is a 100 percent Small Business Set-Aside under NAICS code 334513. Award will be granted to the responsible offeror based on the Lowest Price Technically Acceptable (LPTA) basis. To be considered technically acceptable, offerors must be registered as a small business in SAM, provide pricing for all CLINs, commit to a delivery schedule of 100 days after contract award, and maintain an acceptable or neutral past performance record in the Supplier Performance Risk System. Due to the inclusion of Controlled Unclassified Information and export-controlled data, strict cybersecurity and security protocols are in place. Offerors must possess a current DD Form 2345 and provide proof of CMMC Level 2 self-assessment certification to access the Technical Data Package via the DoD SAFE website. Additionally, technical acceptability requires a current NIST SP 800-171 assessment and CMMC Level 2 certification recorded in the Supplier Performance Risk System. All delivered equipment must be new, covered by a manufacturer warranty, and packaged and marked in accordance with ASTM D3951-18 and MIL-STD-129R standards. Proposals are due by October 22, 2026, at 4:00 pm EST.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 23 hours ago

DEADLINE

Japan E-2D Static Frequency Converter

Solicitation # N68335-26-RFI-1218

The Department of Defense, specifically the Navair Warfare Ctr Aircraft Division, has issued a Sources Sought notice under solicitation N68335-26-RFI-1218. This request is for information regarding the procurement of one Static Frequency Converter, part number 1000AG1000-2, intended for the Japan Air Self-Defense Force. The required equipment must be capable of converting incoming electrical power to the specific frequency and voltage necessary for aircraft system operations. This action is a Request for Information only and does not constitute a formal solicitation, invitation for bid, or request for proposal. Interested parties must submit company details, including their CAGE Code, DUNS number, and business size status under NAICS code 335312, along with descriptive product literature to the primary point of contact. All responses must be submitted electronically by the deadline of October 21, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

MATS Functional Test Set (FMS)

Solicitation # N6833526Q1183

The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm-Fixed-Price contract to manufacture, assemble, inspect, and deliver one MATS Functional Test Set (Part Number 90249, NSN 4920-01-566-8231). This Intermediate Level Peculiar Support Equipment is required to support the V-22 aircraft program, specifically for the Japan Ground Self-Defense Force MV-22B Block C program via Foreign Military Sales. The solicitation, originally numbered N6833526Q1183 and updated to N68335-27-Q-1021, is a 100 percent Small Business Set-Aside under NAICS code 334519. Delivery is required within 26 weeks from the date of award, with inspection and acceptance occurring at the origin. To access the export-controlled Build-to-Print Technical Drawing Package, which contains Controlled Unclassified Information, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 Self-Assessment certification. Award will be granted to the responsible offeror proposing the lowest evaluated price who meets all technical and non-price requirements, including ISO9001 certification and a satisfactory past performance rating in the Supplier Performance Risk System. Proposals must be submitted electronically via email and must include CMMC unique identifiers for any systems processing federal contract information or controlled unclassified information. Packaging and marking must adhere to MIL-STD-129R and MIL-STD-130 standards, with a strict prohibition on loose fill materials and asbestos.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Proof Load Testing and Certification ServicesThis small business set-aside subcontract involves providing proof load testing and certification services for the Navair Warfare Ctr Aircraft Division under the Department of Defense. The selected vendor will be responsible for conducting proof load tests on part number 4097AS200-1, strictly adhering to Government drawing 4097AS200 through the use of specialized load testing rigs. A critical requirement for this contract is that the vendor must be certified to issue government-acceptable proof load certificates. Final deliverables include both hardcopy and electronic versions of these certificates. The solicitation was posted on October 15, 2026, with a response deadline of November 23, 2026, falling under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Fabrication and Assembly of MHU-191 Munitions LoadersThis small business set-aside subcontract involves the fabrication and assembly of new MHU-191 Munitions Loader/Transporters for prime contractors supporting the Navair Warfare Ctr Aircraft Division. The selected provider must perform all work in strict accordance with Government drawing 1500AS125 and ensure that equipment identification plates are permanently affixed according to MIL-STD-130 standards. The project requires strict adherence to cybersecurity standards, specifically NIST SP 800-171 and CMMC Level 2 compliance. Interested parties must submit their responses by November 23, 2026, to provide the completed munitions loaders under NAICS code 332312 for the Department of Defense.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Fabrication and Assembly of ADU-952/E Push Up AdaptersThis small business set-aside subcontract involves the fabrication and assembly of new ADU-952/E Push Up Adapters for prime contractors supporting the Navair Warfare Ctr Aircraft Division. The selected provider must perform all work in strict accordance with Government drawing 4097AS200 and ensure that equipment identification plates are permanently affixed according to MIL-STD-130 standards. Due to the nature of the project, the contractor is required to maintain NIST SP 800-171 and CMMC Level 2 compliance. The contract was posted on October 15, 2026, with a response deadline of November 23, 2026. The primary objective is the delivery of completed ADU-952/E Push Up Adapters under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS