Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from California was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

C5613375-D - Landfill, Sampling, Testing and Monitoring Service

Closed
0000039547State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
DIBBS
Non-Destructive Testing (NDT) and Inspection ServicesThis subcontract for Non-Destructive Testing (NDT) and Inspection Services supports prime contractors on DLA Weapons Support ASC projects for the Department of Defense. The scope of work involves performing critical inspections using X-ray, ultrasonic, magnetic particle, or dye penetrant testing in accordance with the Technical Data Package to ensure sample lots have zero non-conformances. All work must be executed using calibrated Measuring and Test Equipment per RT001, and the provider must maintain NDT accreditation per RQ040. The selected contractor is responsible for delivering detailed NDT inspection reports and certifications of conformance. This opportunity falls under NAICS code 541380 and was posted on October 23, 2026, with a response deadline of November 23, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Soil Analysis and Testing ServicesThis subcontract for Soil Analysis and Testing Services involves performing specialized soil chemistry analysis for prime contractors working on University of Georgia projects located at Fort Benning. The scope of work focuses on testing sandy-clay-loam soils to determine acidity levels and nutrient deficiencies using professional laboratory equipment. The primary objective is to provide detailed soil analysis reports and specific amendment recommendations for sites identified as strongly acidic. The selected provider must hold a valid environmental testing certification to perform these services. This opportunity is categorized under NAICS code 541380 and was posted on October 23, 2026, with a response deadline of November 23, 2026.
University of Georgia

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Environmental Testing & Inspection
City of Houston

POSTED

about 7 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Pipeline Condition Assessment and NDT ServicesThe Pipeline Condition Assessment and NDT Services subcontract involves performing exterior visual inspections and non-destructive testing for prime contractors on Santa Fe Irrigation District pipeline projects in Rancho Santa Fe, California. The scope of work focuses on evaluating the material condition and estimating the remaining useful life of above-ground steel pipeline bridge crossings, couplings, and supports while the pipelines remain in service. Qualified providers must utilize ultrasonic, radiographic, or magnetic particle inspection equipment and hold the necessary ASNT certifications and California professional licenses. The primary objective is to deliver detailed condition assessment findings. Responses for this opportunity are due by December 3, 2026.
Santa Fe Irrigation District

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
Federal
First Article Test and Inspection (FATI)
Ok DLA Aviation At Oklahoma City

POSTED

about 10 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Sludge Analysis and Laboratory Testing ServicesThis subcontract for Sludge Analysis and Laboratory Testing Services involves performing specialized laboratory testing on sewage sludge for prime contractors working on Town of Glastonbury Water Pollution Control Division projects. The selected provider will analyze sludge samples according to specific parameters and schedules to ensure all materials meet the necessary regulatory standards and disposal facility requirements. The contractor is responsible for delivering detailed test results and compliance reports. To be eligible, the laboratory must hold the required certifications to perform sewage sludge disposal parameters within the State of Connecticut. This opportunity is managed by DAS Procurement for the state of Connecticut under NAICS code 541380. The solicitation was posted on October 23, 2026, with a response deadline of November 10, 2026.
DAS Procurement

POSTED

about 10 hours ago

DEADLINE

in 18 days
NAICS: 541380
New
SLED
Street Geotechnical Testing Services
City of Holtville

POSTED

about 10 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
SLED
PFAS/AFFF Laboratory Analysis and Compliance Reporting
CITY OF SANTA MONICA

POSTED

about 10 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
SLED
Testing & Disinfection Services
Antelope Valley - East Kern Water Agency

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 541380
New
SLED
RFB-IS-27200285 - OCEAN WATER TESTING - AS-NEEDED - Closing: 11/5/2026 12:00 PM
Solicitation # 232647
Los Angeles County

POSTED

about 14 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
International
Quality Assurance & Testing ServicesThis subcontract for Quality Assurance and Testing Services involves providing independent testing and validation for proof of concept installations on PRASA ticket validation projects. The selected provider will be responsible for conducting a comprehensive suite of evaluations, including functional, integration, security, performance, and recovery testing, to ensure all user-acceptance results are fully validated. The final deliverables for this engagement consist of approved demonstrations and signed testing results. The project is managed by the Passenger Rail Agency of SA (PRASA) and will be performed in South Africa. To be eligible, the contractor must hold a professional certification as a testing and quality-assurance specialist. Interested parties must submit their responses by October 30, 2026, under NAICS code 541380.
PRASA - Passenger Rail Agency of SA PRASA House

POSTED

about 14 hours ago

DEADLINE

in 6 days
NAICS: 541380
New
International
Lifting Equipment Inspection and Certification ServicesThis subcontract for Lifting Equipment Inspection and Certification Services involves performing technical inspections and certifications for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes conducting physical inspections of cranes, hoists, and rigging gear through the use of load testing and non-destructive testing tools to ensure full compliance with local safety standards as well as ASME and LOLER regulations. The selected provider must employ Certified Lifting Equipment Inspectors to deliver detailed inspection reports and official safety certificates. Interested parties should note that the response deadline is November 10, 2026, and the services will be performed on-site within Pakistan under NAICS code 541380.
Oil & Gas Development Company Limited (OGDCL)

POSTED

about 15 hours ago

DEADLINE

in 17 days

AI Contract Overview

Show more

The contract requires the contractor to provide comprehensive landfill sampling, testing, and monitoring services for the California Department of Corrections and Rehabilitation at the Sierra Conservation Center in Jamestown, California. The scope includes providing all labor, travel, per diem, materials, non-consumable supplies, transportation, equipment, and any other necessary expenses to complete the work. The services are aimed at ensuring proper environmental management and compliance related to landfill operations at the specified facility. This solicitation, identified as C5613375-D with the solicitation number 0000039547, was posted on June 12, 2026, and has a response deadline of July 9, 2026. The contract is managed under the California Department of Corrections and Rehabilitation, and the primary point of contact for this opportunity is Nakia Breckenridge, who can be reached via email or phone. The work location is in California, specifically at the Sierra Conservation Center at 5100 O'Byrne's Ferry Road in Jamestown.

General Info

Provide landfill sampling, testing, and monitoring services at Sierra Conservation Center, California.

Agency

California Department of Corrections & Rehabilitation

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

2

IFB C5613375-D Landfill Sampling, Testing, and Monitoring Services

PDF, High priority: read this firstifb
High

IFB Exhibit B-1 Rate Sheet for Landfill Sampling Services C5613375-D

VNDOPENXMLFORMATS-OFFICEDOCUMENT.SPREADSHEET.SHEET, High priority: read this firstrate-sheet
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia Department of Corrections & Rehabilitation
Contacts1 person available
OfficeN/A
Organization / AgencyCalifornia Department of Corrections & Rehabilitation
Office AddressN/A
Contacts
Nakia Breckenridge
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
The Contractor shall furnish all labor, including travel and per diem, materials, non-consumable supplies, transportation, equipment, and every other item of expense necessary to perform Landfill Sampling, Testing, and Monitoring Services for the California Department of Corrections and Rehabilitation (CDCR), Sierra Conservation Center (SCC), located at 5100 O'Byrne's Ferry Road, Jamestown, California 95327.

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

NAICS: 562111
New
SLED
Refuse Collection & Disposal ServicesThis subcontract for Refuse Collection and Disposal Services supports prime contractors working on projects for the California Department of Corrections and Rehabilitation. The selected provider will be responsible for collecting general refuse from designated areas using dumpsters and collection trucks, ensuring all materials are hauled to authorized landfills. The contractor must maintain strict compliance with environmental health requirements and the standards set by the local Authority Having Jurisdiction. Key deliverables include the documented disposal of all refuse. Interested parties should note the response deadline of November 18, 2026, for this opportunity categorized under NAICS code 562111.
Solid Waste Collection

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 484220
New
SLED
Specialized Waste Hauling & TransportationThis subcontract for Specialized Waste Hauling and Transportation involves the transport of non-hazardous sludge and refuse for prime contractors working on California Department of Corrections and Rehabilitation projects. The selected provider will operate heavy-duty trucking vehicles to move sealed containers from various facilities to authorized disposal sites, with operations potentially crossing both site and state lines. To qualify, the contractor must secure all required hauling permits and licenses, and all drivers must obtain necessary background clearances. This opportunity is categorized under NAICS code 484220, with a response deadline set for November 18, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 562219
New
SLED
Non-Hazardous Sludge Removal & Vacuum ServicesThis subcontract for Non-Hazardous Sludge Removal and Vacuum Services involves providing extraction and loading services for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes using vacuum trucks to remove sludge from containers and ensuring all containers are properly sealed in accordance with US EPA 503 Federal Regulations and California Regional Water Quality Control Board requirements. The selected provider is responsible for the delivery of the loaded and sealed containers. Due to the nature of the work sites, all staff members are required to obtain background clearance. This opportunity is categorized under NAICS code 562219, with a response deadline set for November 18, 2026.
Other Nonhazardous Waste Treatment and Disposal

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 562219
New
SLED
C5613442-D Non-Hazardous Sludge Removal, Hauling and Refuse Services
Solicitation # C5613442-D
Solicitation C5613442-D is a Master Agreement for the California Department of Corrections and Rehabilitation (CDCR) to secure non-hazardous sludge removal, hauling, and refuse services across various participating locations in California. The contractor is responsible for all labor, transportation, equipment, and permits required to perform these services, which must comply with California Regional Water Quality Control Board requirements and US EPA 503 Federal Regulations. Sludge is classified as Sub Class B, and the contractor must ensure strict adherence to fecal coliform and pathogen reduction standards. All services are subject to inspection by a CDCR Contract Liaison, and the contractor must provide a minimum ninety-day guarantee on all services and replaced parts. The contract is awarded based on the lowest price, calculated by multiplying the unit rate per ton by the estimated quantity for each location. Bidders may benefit from a DVBE incentive ranging from 1% to 5% or a 5% preference for non-small businesses with at least 25% SB/MB subcontractor participation. Compensation is based on the rates specified in the Exhibit B-1 Rate Sheet, with invoices submitted monthly in arrears. Compliance requirements include adherence to Cal/OSHA bloodborne pathogen and aerosol transmissible disease regulations, the Americans with Disabilities Act, and various state and federal certifications including the Darfur and Iran Contracting Acts. Submission of bids requires a comprehensive package of PDF documents, including the OBS 300 Bidder Acknowledgement/Certification and the Rate Sheet, delivered via email by the specified deadline.
Other Nonhazardous Waste Treatment and Disposal

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 333517
New
SLED
CDCR-DRP DESKTOP MILL AND DESKTOP LATHE
Solicitation # 10846575-1
The California Department of Corrections and Rehabilitation, Division of Rehabilitative Programs, is soliciting quotes for the acquisition of ten Desktop CNC 3-Axis Mills and eight Desktop CNC Lathes. This equipment is designated for the Career Technical Education Manufacturing, Design and Engineering Program serving incarcerated individuals at the Central California Womens Facility and the Correctional Institution for Women. The contractor is responsible for providing new, latest-model equipment, installation on locking mobile and stationary toolboxes, and comprehensive professional services. These services include eight hours of initial onsite operational training per machine and annual refresher training for up to five instructors per institution for a period of five years. Additionally, the contractor must provide a five-year service contract and a five-year preventive maintenance plan from the date of installation. The procurement follows a Value-Effective award methodology, with the contract awarded to the bidder achieving the highest total weighted score based on technical requirements (60 percent), the deliverables table (30 percent), and cost (10 percent). Bidders must submit their responses in two separate emails by November 3, 2026, consisting of an administrative and technical proposal and a separate cost proposal. Key compliance requirements include F.O.B. Destination shipping, mandatory GenAI usage disclosures, and certifications regarding California civil rights laws and postconsumer recycled content. Proposals that respond with no to any mandatory technical or deliverable requirement will be deemed non-responsive and disqualified.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 541930
New
SLED
C5613444-D American Sign Language (ASL) Video Remote Interpreting (VRI) Services
Solicitation # C5613444-D
The California Department of Corrections and Rehabilitation (CDCR) is soliciting bids for a Master Agreement to provide Temporary Relief American Sign Language (ASL) Video Remote Interpreting (VRI) services across various statewide institutions, parole offices, and community-based programs. The projected contract term runs from January 1, 2027, to December 31, 2029. Services must be available 24 hours a day, 7 days a week, with on-demand interpreters connecting within an average of 30 seconds and no longer than 5 minutes. The contractor is required to provide a minimum of one interpreter per assignment via an approved VRI platform to support deaf, speech, or hearing-impaired incarcerated persons, staff, and visitors. Bids are due by November 30, 2026, and will be evaluated based on a comparison of rates provided in the bid schedule, which includes a 25 percent allowance for as-needed services. Award decisions may be influenced by DVBE incentives of up to 5 percent or $500,000. Qualified interpreters must hold certifications from the Registry of Interpreters for the Deaf (RID), the National Association for the Deaf (NAD), or the California Department of Rehabilitation (DOR), with additional court certification required for the Office of Legal Affairs. Contractors must comply with strict security and privacy protocols, including signing Non-Redisclosure Agreements, adhering to HIPAA and PII/PHI laws, and maintaining comprehensive general liability, automobile, and workers compensation insurance.
Translation and Interpretation Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
SLED
C5613351-D - Concrete Debris Removal and Slope Stabilization Services
Solicitation # C5613351-D
The California Department of Corrections and Rehabilitation is soliciting bids for contract C5613351-D to provide concrete debris removal and slope stabilization services at the Richard J. Donovan Correctional Facility in San Diego, California. The project involves remediating the illegal placement of inert fill material through activities such as clearing and grubbing the top six inches of debris, site grading, excavation, and rock slope protection. The contractor is responsible for transporting crushed concrete to approved recycling or landfill facilities and implementing a Storm Water Pollution Prevention Plan. All work must adhere to strict compaction standards of 90 percent relative compaction and comply with the California Building Code for Essential Services Buildings. The estimated contract value is 702,614.00 dollars, with the award based on the lowest responsive bid. Bidders must submit their rates via the Public Works Rate Sheet and provide a bid security of at least 10 percent of the base bid. Performance and payment bonds are required upon award. The project mandates strict adherence to a Community Health and Safety Plan and a Revised Soil Management Plan to manage environmental hazards and illegal fill. Bids must be submitted electronically by December 9, 2026, and include various certifications, including DVBE declarations and prevailing wage compliance. Payment will be made via electronic invoicing, either monthly in arrears or as a lump sum upon completion.
Site Preparation Contractors

POSTED

3 days ago

DEADLINE

in about 2 months
View Details
NAICS: 562998
New
SLED
C5613678-D, Concrete and Asphalt Crushing Services
Solicitation # C5613678-D
The California Department of Corrections and Rehabilitation is soliciting bids for concrete and asphalt crushing services to support the Correctional Construction Mentorship Program at the Richard J. Donovan Correctional Facility in San Diego. The contractor will provide all labor, materials, equipment, and transportation to operate an on-site crushing plant featuring a jaw seizer capable of producing a 3/4 inch base from concrete with or without rebar, as well as performing asphalt grinding. Services are required on an as-needed basis with equipment operation scheduled Monday through Friday from 6:30 a.m. to 3:00 p.m. The anticipated period of performance begins January 1, 2027, and extends through December 31, 2029, with an estimated total contract value of 250,000 dollars. Awards will be based on the lowest responsive and responsible net bid price derived from the Exhibit B-1 Rate Sheet, with price reduction incentives available for certified Disabled Veteran Business Enterprise participation. Bidders must submit a comprehensive PDF package by December 1, 2026, including a valid California business license and a DMV Motor Carrier Permit. Key compliance requirements include adherence to Cal OSHA bloodborne pathogen regulations, the Americans with Disabilities Act, and strict prohibitions regarding the employment of certain ex-offenders. Invoices must be submitted electronically in PDF format no later than 60 days after services are rendered and must be accompanied by required service reports to avoid disputes.
All Other Miscellaneous Waste Management Services

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 611430
New
SLED
Technical Training and Instructional SupportThis subcontract for Technical Training and Instructional Support involves providing specialized training and technical assistance for CNC equipment operation on projects within California Department of Corrections and Rehabilitation facilities. The selected provider will deliver instruction to both staff and incarcerated individuals, utilizing training manuals and materials that align with the DRP machining certification curriculum. Key deliverables include the successful completion of training sessions and the submission of detailed technical assistance reports. The opportunity is categorized under NAICS code 611430 and is associated with the state of California. Interested parties should note that the response deadline is November 3, 2026, following a posting date of October 20, 2026. This engagement focuses on enhancing technical skills and certification alignment for prime contractors operating within the CDCR system.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 238990
New
SLED
Equipment Installation and Technical IntegrationThis subcontract for Equipment Installation and Technical Integration involves the physical installation and integration of new CNC Mill and Lathe equipment for prime contractors at California Department of Corrections and Rehabilitation facility projects. The scope of work includes integrating hardware and software into existing workshop layouts and utilizing industrial rigging tools to ensure all systems are fully operational. The project falls under NAICS code 238990 and requires strict adherence to all CDCR security and safety protocols. Interested parties should note the posted date of October 20, 2026, with a response deadline of November 3, 2026.
All Other Specialty Trade Contractors

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333517
New
SLED
CNC Lathe Equipment SupplyThis subcontract agreement concerns the supply of CNC Lathe equipment for prime contractors working on projects for the California Department of Corrections and Rehabilitation. The scope of work involves delivering hardware that adheres to specific technical requirements to ensure full compatibility with Haas ST-10 and ST-25Y lathes. All provided equipment must strictly comply with the security and safety standards mandated by the agency. The contract is categorized under NAICS code 333517, with a response deadline set for November 3, 2026.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333517
New
SLED
CNC Mill Equipment SupplyThis subcontract for CNC Mill Equipment Supply involves the provision of Desktop CNC Mill 3 Axis hardware for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The equipment must strictly adhere to the technical specifications outlined in Exhibit A-1 to ensure full compatibility with Haas VF-1, VF-2 SS, and UMC-750 SS mills. Beyond technical compatibility, all delivered hardware must comply with the rigorous security and safety requirements mandated by the CDCR. The procurement process is categorized under NAICS code 333517, with a response deadline set for November 3, 2026.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS