Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on September 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CABLE ASSEMBLY,MAIN

Closed
SPRMM126QHD18Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335311
New
SLED
ITB-2027-003 Padmount Transformers
Solicitation # ITB-2027-003
The Town of Bedford Electric Department in Virginia is soliciting bids under ITB-2027-003 for the purchase of several padmount transformers with specifications of 12470GY/7200 – 240/120V. The required equipment must feature a secondary voltage of 240/120 Volt, 30 kV BIL, and be rated 8.3 kV Phase to Ground. Technical requirements include sealed tank construction capable of withstanding 7 psig without permanent distortion and 15 psig without rupture, aluminum secondary windings, and Bay-O-Net style removable fuses shipped for 12 kV operation. All units must adhere to ANSI/NEMA C57.12.35 for bar coding and ANSI C57.28 for tank coating, with specific yellow lettering requirements for kVA ratings and voltage markings on the exterior case. The contract will be awarded to the lowest responsive and responsible bidder, with the Town reserving the right to exclude bidders involved in litigation or those with prior defaults. Bids must be submitted by 3:00 p.m. local time on December 4, 2026, and must include a bid worksheet and detailed technical literature. Delivery is required to the Town of Bedford Electric Department at 877 Monroe Street, Bedford, VA, with all pricing inclusive of packing charges. Awarded contractors must maintain comprehensive insurance, including Workers Compensation, Commercial General Liability, and Professional Liability with a $1,000,000 minimum limit. Additionally, bidders must certify compliance with non-discrimination laws and the Virginia Public Procurement Act, and are encouraged to utilize certified SWaM businesses.
Town of Bedford

POSTED

about 17 hours ago

DEADLINE

in 16 days

AI Contract Overview

Show more

Solicitation SPRMM1-26-Q-HD18, issued by DLA Mechanicsburg, is a small business set-aside request for quotations for the manufacture and supply of a Main Cable Assembly (NSN 7HH 6150-01-627-7301). While the original request included a second line item for an electrical cable assembly, CLIN 0002 has been canceled in its entirety via Amendment 0002. The solicitation has undergone multiple extensions, with the final response deadline set for October 30, 2026, at 4:30 PM local time. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering technical compliance and risk assessments from the Supplier Performance Risk System. The contractor is responsible for all inspection requirements, with inspection and acceptance occurring at the source. All deliverables must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073. Invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) system. Key compliance requirements include adherence to the Buy American-Balance of Payments Program, cybersecurity standards under DFARS 252.204-7012, and the provision of Original Equipment Manufacturer (OEM) details if the offeror is a distributor. Shipping is designated as FOB Origin to destination W25G1U.

General Info

DLA small business solicitation for Main Cable Assembly manufacture, due October 30, 2026.

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

PA

Set-Aside

small business

Documents

3
PDF, High priority: read this firstamendment
High
PDF, High priority: read this firstrfq
High
PDF, High priority: read this first4 pages · amendment
High

Read all 3 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • CABLE ASSEMBLY SPECIAL PURPOSE, ELECTRICAL BRANCHED-W102Open now, due in 33 days
  • 61--CABLE ASSEMBLY,SPECOpen now, due in 21 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

2 updates
PhaseClosed
Posted

Solicitation

Notice updated

Response deadline changed from Jul 27, 2026 to Aug 31, 2026. The notice description changed.

Notice updated

Response deadline changed from Aug 31, 2026 to Oct 30, 2026. The notice title changed. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
Contacts1 person available
OfficeMECHANICSBURG, PA, 17055-0788, USA

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|x||x|||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)||TBD|SPRMM1|TBD|TBD|TBD|TBD|||TBD|||||TBD| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL VESSELS (DEV 2026-O0047)(MAR 2026))|2||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| SMALL BUSINESS PROGRAM REPRESENTATIONS (DEV 2026-O0037)(FEB 2026)|20|335311|800||||||||||||||||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|x|x|x|||x|||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| CLIN 002 HAS BEEN CANCELED. THIS FILE HAS BEEN EXTENDED UNTIL 29 OCT 2026. This amendment is to extend the soliciationtion until 31 AUG 2026. 1. All contractual documents (i.e. contracts, purchase orders, task orders, Delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 2. Drawings or technical data are not available for this item. 3. Delivery days_________aro. 4. Offer valid for _____ days. 5. When submitting quotes via Electronic Data Interchange (EDI), make sure you specify any exceptions (i.e. Mil specs/standards, packaging, Inspection & Acceptance (I&A), packaging houses etc) or follow up with a hardcopy of the exceptions. If nothing is indicated or received, award will be based upon solicitation requirements. Changes or requests for changes after award will have consideration costs deducted on modifications. 6. If you are not the manufacturer of the material you are offering, you MUST state who the Original Equipment Manufacturer (OEM) is - Commercial and Government Entity Code (CAGE) code and the part number you are offering. 7. Please provide an email address for follow up communications. ____________________________________________________________ 8. It is recommended that vendors provide contact information to NAVSUP Weapon System Support (WSS) Mechanicsburg in order to receive automated notifications from Navy Electronic Commerce Online (NECO) when contracts/modifications are issued by Defense Logistics Agency (DLA) Weapons Support Mechanicsburg and posted on Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA). To receive these notifications, contact: NAVSUPWSS code 025, procurement systems design and contract support division Via email at Sign up to see this detail. Please include the following information with your request: CAGE code, company name, address and Point-of-Contact (POC) with phone number and email address. 9. Contractors can view their orders, contracts and modifications at the EDA web tool. This web tool is located at the PIEE website. It is recommended that the contractor register for EDA at https://piee.eb.mil/. Click on new user and registration. Any order resulting from this Request for Quotation will require electronic submittal of Invoice and Receiving Report (COMBO) through PIEE-WAWF. 10. The following DLA Procurement Notes are applicable to this requirement: E06 Inspection and Acceptance at Source (JUN 2018) 11. INSPECTION OF MATERIAL WILL BE AT (CAGE & ADDRESS): ______________________________________________________________ INSPECTION OF PACKAGING AND FINAL ACCEPTANCE OF MATERIAL WILL BE AT (CAGE & ADDRESS): ______________________________________________________________ 12. UCF SECTION F PRODUCTION FACILITY CHANGES (a) The performance of any of the work contracted for in any place other than that named in the contract is prohibited unless specifically approved by the Contracting Officer. Written requests for a change in production facilities must be submitted in writing to the Contracting Officer. Changes in production facilities may be approved, provided: (1) Performance by small business or in labor surplus areas as required by the contract will not be changed; (2) The change will not cause a delay in delivery or necessitate a change in the purchase description; (3) The free on board (f.o.b.) point is not changed; and (4) Each request is supported by a price reduction of $250.00 to cover the Government's administrative costs to process the change. (b) The Government reserves the right to deny approval even if these four elements are met. Award evaluations will be made using the Lowest Price Technically Acceptable (LPTA) criteria per DFARS 215.101-2-70(a)(1)(i). This solicitation is being issued under SEPA-EAF Authority. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the CABLE ASSEMBLY,MAIN . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The CABLE ASSEMBLY,MAIN furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;53711 8355420; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer. 6.3 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161.

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 334511
New
Federal
RODMETER,UNDERWATER
Solicitation # SPRMM126QHC31
The contract pertains to the procurement of the RODMETER, UNDERWATER (NSN 7HH 6605-00-932-3713) under solicitation SPRMM126QHC31, issued by DLA Mechanicsburg with a response deadline of August 28, 2026. The item must be manufactured to exact specifications, marked in accordance with MIL-STD-130 Rev N, and produced under the CAGE code 14058 IC/E100-6FX. All supplies are subject to fixed-price terms, with inspection responsibilities primarily assigned to the contractor, though the government retains the right to conduct inspections at the contractor’s facility or destination as permitted by Procurement Note E06, and final acceptance occurs at a designated government location with specified CAGE and address. Packaging and preservation must strictly comply with MIL-STD-2073-1, with differentiated requirements for domestic (CONUS) and overseas (OCONUS) shipments, including Level A and B packaging standards, ISPM 15-compliant wood packaging, and barrier materials from qualified lists. Marking must follow MIL-STD-129 with mandatory inclusion of the Procurement Instrument Identifier, CLIN, and SubCLIN, and specialized DLR labeling for items with specific Cognizance codes, using yellow-on-blue labels per NAVSUP forms. The contractor must maintain quality records for 365 days after delivery and ensure all hazardous materials are properly documented with SDS and GHS compliance. Compliance with cybersecurity regulations, including NIST SP 800-171 and clause 252.204-7012, is required, along with flow-down obligations to subcontractors. The contract prohibits procurement from certain foreign entities and enforces strict representation and certification requirements, including Small Business status under recent deviations, DEI discrimination prohibitions, and prohibitions against inverted domestic corporations. Invoice and receipt reporting must be submitted electronically through WAWF, and payment will be processed via EFT. The solicitation emphasizes past performance as the most significant evaluation factor, assessed via SPRS color ratings, with price being secondary; awards will be made on a trade-off basis, not LPTA. Contractors must register with PIEE-EDA, provide authorized distributor proof if not the OEM, supply contact information for notifications, and ensure all changes to design, materials, or part numbers are pre-approved via written
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS