Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cable Assembly Manufacturing and Delivery

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, testing, labeling, packaging, and delivery of a military-spec cable assembly identified by NSN 6150-01-713-4440, to be shipped to Tracy, CA with destination inspection as the final requirement. All work must strictly comply with MIL-STD-129 for labeling and packaging standards, and hazardous materials must be properly labeled according to applicable regulations. The product must meet all military specifications and undergo full testing to ensure performance and reliability under operational conditions. The delivery destination is fixed at Tracy, CA with ZIP code 95304-5000, and no alternative delivery points are permitted. The contract is structured as a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, and falls under NAICS code 335311 which pertains to other electronic component manufacturing. Responses are due by August 7, 2026, with the solicitation posted on July 30, 2026, and the performance location is solely at the designated delivery site. All parties must ensure full adherence to federal defense logistics standards and documentation protocols throughout the manufacturing and delivery process.

General Info

Manufacture and deliver military-spec cable assembly NSN 6150-01-713-4440 to Tracy, CA, per MIL-STD-129 and defense standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, test, label, package, and deliver a military-spec cable assembly (NSN: 6150-01-713-4440) to Tracy, CA with destination inspection. Compliance with MIL-STD-129 and hazardous materials labeling required.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-26-T-220J

The Defense Logistics Agency is soliciting 45 power supplies identified by NSN 6120-01-705-6913 under solicitation SPE7M1-26-T-220J, with a delivery requirement of 181 days ADO to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is structured as a fixed-price supply contract with FOB Origin terms and mandates full compliance with the DLA Master List of Technical and Quality Requirements, which supersedes all other packaging and quality standards such as ASTM D3951. Packaging and labeling must strictly follow MIL-STD-129, including appropriate barcoding and hazardous material markings in accordance with 29 CFR 1910.1200, while palletization adheres to DLA's RP001 requirements. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaire. Cybersecurity compliance is required at CMMC Level 2, either through a self-assessment or via a certified third-party assessment organization. All contractors must comply with safeguarding requirements for covered defense information per DFARS 252.204-7008 and 252.222-7006, including cyber incident reporting and system protections. The contract prohibits the use of foreign-flag vessels for ocean transportation unless a waiver is granted, and contractors must submit post-shipment documentation including bills of lading with ten required data elements. Invoicing must be conducted through WAWF, with no alternative systems permitted, and payments will be processed per the designated DoDAAC upon successful delivery and inspection at the destination. The contracting officer, Michael Reese of DLA Land and Maritime, is the primary point of contact, while the COR/COTR will be designated upon award. Offerors must provide their UEI and CAGE code, and are required to certify their small business status and socioeconomic classifications as applicable. The contract includes no specified pricing, and the acquisition is not subject to a set-aside; it is governed by standard FAR and DFARS clauses, including those relating to contractor representation, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, and prohibition of hexavalent chromium. Any deviations or waivers from specifications require formal engineering change proposals, and all supplies must conform to the source-controlled drawing referenced

MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # N0010426QXB46

This contract solicitation, identified as N0010426QXB46, is for the procurement of a CABLE ASSY,MAI under a Firm-Fixed Price arrangement, with all quotations required to be submitted electronically to russell.w.kreider.civ@us.navy.mil by the deadline of August 14, 2026. The award is contingent upon the vendor being an authorized distributor of the original equipment manufacturer, requiring official documentation confirming authorization, and strict adherence to Item Unique Identification (IUID) requirements per DFARS 252.211-7003 and MIL-STD-130 Rev N for physical marking. The contract specifies FOB Origin delivery, mandatory compliance with MIL-STD-2073 packaging standards, and Government Source Inspection, with all supplies subject to inspection and acceptance in accordance with the terms outlined. The contractor must provide a detailed cost breakdown including unit price, total price, lead time, CAGE codes for award and inspection, and a quotation expiration date valid for at least 90 days, and must not make any design, material, or part number changes without prior written approval from the contracting officer, using designated change codes to categorize modifications. The contract imposes comprehensive quality assurance obligations, requiring the contractor to maintain complete and accessible inspection records for 365 days after final delivery and to ensure full compliance with all technical specifications without reliance on sampling to justify defective material submission. Alterations to the part must be flagged using specific design change codes ranging from simple part number updates to non-interchangeable redesigns, with supporting drawings and explanations required for evaluation. All referenced documents must be obtained through authorized DoD sources, with special procedures outlined for restricted documents such as NOFORN or classified materials, which require formal request processes. The solicitation emphasizes that only authorized distributors will be considered for award, and failure to submit proof of authorization disqualifies the offer. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with all communications and submissions directed to the designated point of contact.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 2 months

DOH Office Electrical Work Travis AFB

Solicitation # FA442726Q1114

The contract seeks contractor support to upgrade the Mobility Operations Flight (DOH) facilities at Travis AFB in compliance with the Statement of Work dated July 30, 2026. The work involves electrical improvements and is designated as a Small Business Set Aside, total, under NAICS code 335311, ensuring eligibility for small businesses only. The solicitation number is FA442726Q1114, posted on July 31, 2026, with responses due by August 20, 2026. All work must be performed at Travis AFB, California, 94535, and is managed by the Department of Defense office under the 60th Contracting Logic unit. Primary point of contact is Vanessa Siegel, reachable via email and phone, with Brandon Spratt serving as the secondary contact for coordination. The opportunity is publicly accessible through the SAM.gov portal for interested small business contractors.

FA4427 60 Cons Lgc

POSTED

about 21 hours ago

DEADLINE

USAGM Transformer Parts, Kuwait TS

Solicitation # 951700-26-Q-T00051

The solicitation for USAGM Transformer Parts in Kuwait, identified by number 951700-26-Q-T00051, was posted on July 31, 2026, with a response deadline of August 6, 2026, at 4:00 PM Eastern Time. This is a combined solicitation with no set-aside designated, targeting vendors supplying transformer parts under NAICS code 335311. The contract is managed by the Office of Contracts within the U.S. Agency for Global Media, with the primary point of contact being Nicole Wright, Contracting Officer, reachable at NWright@usagm.gov. The place of performance is in Sterling, Virginia, while the work supports operations in Kuwait. The solicitation has been amended to include responses to vendor questions and a revised Statement of Work, both provided as attachments, while all other terms and conditions remain unaltered. Interested parties must review the updated documents and submit proposals through the SAM.gov portal by the stated deadline.

Office Of Contracts

POSTED

about 21 hours ago

DEADLINE

100KVA Padmount Transformers

Solicitation # 26-061

The City of Dothan, Alabama, has issued a solicitation for 100KVA Padmount Transformers under bid number 26-061, which is currently open for bidding and closing in approximately 11 days. The request is categorized as a SLED procurement and is being processed offline with the base currency set to USD. The solicitation was posted on July 30, 2026, and responses are due by August 11, 2026, at 7:00 PM Eastern Time. All bid documents, addendums, and clarification submissions must be accessed and completed through the official procurement portal, requiring vendor login. The primary point of contact for inquiries is Thad Taylor, reachable at purchasing@dothan.org or 334-615-3154. Performance of the contract will occur within the state of Alabama, with no specific city or zip code designated. No set-aside or NAICS code information is provided, and the bid is not restricted to any specific vendor classification.

POSTED

DEADLINE

Power Transformer Manufacturing and SupplyThe contract requires the manufacture and supply of nine military-specification power transformers meeting stringent defense standards, with full compliance mandated for MIL-STD-129, FED-STD-313, and DLA packaging requirements. These transformers are to be produced to exacting military performance and durability criteria, ensuring reliability under operational conditions. The work must be executed in accordance with federal supply chain protocols, emphasizing proper labeling, documentation, and packaging to support seamless logistics and field deployment. The contract is classified as a subcontract under NAICS code 335311, tied to the Department of Defense’s Maritime Supply Chain initiative, with performance based at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. Although no specific set-aside classification is noted, all bidders must adhere to the technical and administrative obligations outlined in the referenced military and federal standards to be considered for award. The contract opportunity is accessible through the DIBBS portal under the specified RFQ number.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Power Transformer Supply (NSN 5950012612472)The contract specifies the supply of a single military-specification power transformer with National Stock Number 5950-01-261-2472, adhering strictly to Defense Logistics Agency technical, packaging, and labeling requirements. This is a small business set-aside contract under the SBA program, designated as a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, in accordance with FAR 19.5. The North American Industry Classification System code 335311 identifies the industry as Transformer and Power Device Manufacturing. Performance of the contract is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses must be submitted by August 10, 2026, with the transaction conducted under the DLA’s DIBBS platform. The contracting organization is the Maritime Supply Chain under the Department of Defense, and the agreement is structured as a subcontract.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Cable Assembly Manufacturing and TestingThe contract requires the manufacture, testing, packaging, and delivery of 11 units of a military-spec cable assembly identified by NSN 6150-01-719-6909, with full compliance to DLA Master List specifications and adherence to zero-defect quality standards. All work must be performed to ensure every unit meets rigorous defense requirements for reliability and performance under operational conditions. The project falls under NAICS Code 335311 and is classified as a subcontract opportunity issued by the Nuclear Reactor Program within the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and all deliverables must be completed and shipped to this location. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, requiring proposers to submit detailed technical and logistical bids within this narrow window. Compliance with contractual obligations is non-negotiable, with an emphasis on defect-free fabrication, rigorous testing protocols, and precise packaging for secure transport.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Power Transformer Manufacturing & SupplyThe contract requires the design, engineering, testing, and supply of four military-compliant power transformers that meet strict Department of Defense technical standards, including DLA specifications, National Stock Number requirements, and environmental conditions for operational reliability in demanding settings. All deliverables must be manufactured to ensure full compliance with federal military procurement protocols, and the transformers must undergo rigorous verification processes to validate performance under specified thermal, vibration, and electromagnetic conditions. The work is scoped as a subcontract under NAICS code 335311, and performance is to be conducted at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, under the oversight of the Maritime Supply Chain within the Department of Defense.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Power Autotransformer SupplyThe contract seeks the supply of six military-specification power autotransformers identified by NSN 5950008108717, with strict adherence to established packaging and marking standards. All units must meet rigorous defense specifications to ensure reliability and interoperability in operational environments. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses qualify to respond, aligning with FAR 19.5 guidelines. The NAICS code 335311, which classifies the manufacture of electric power distribution equipment, confirms the nature of the required manufacturing capabilities. The performance location is specified as Tracy, California, with a zip code of 95304-5000, indicating the deliverables must be delivered to this designated site. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, leaving a narrow window for submission. The contract falls under the Maritime Supply Chain division of the Department of Defense, emphasizing its connection to naval or maritime operations requiring robust electrical infrastructure. The official reference for submissions and further details is accessible through the DIBBS portal at the provided URL.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Transformer Assembly ManufacturingThe contract entails the full build-to-specification manufacturing of three transformer assemblies, encompassing all phases from initial design validation through core and coil fabrication, tank assembly, comprehensive testing, and complete documentation. This is a subcontract under the NAICS code 335311, specifically for the Department of Defense through its Maritime Supply Chain organization, with performance required at a facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, requiring timely submission of technical and compliance proposals to meet the rigorous standards for defense-grade electrical equipment. All deliverables must adhere to precise engineering specifications and include full traceability and quality assurance records to support military operational requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Cable Assembly Manufacturing & TestingThe contract requires the manufacture, testing, and quality verification of seven military-specification power cable assemblies in full compliance with DLA R&I requirements, ensuring adherence to MIL-STD-2073-1E packaging standards and inspection levels defined in QAP 19200. Each assembly must meet rigorous military performance and durability criteria, with all work subject to strict quality control measures to guarantee reliability in operational environments. The project is scoped as a subcontract under the Department of Defense's ASC Commodities Division, with performance obligations centered at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and falls under NAICS code 335311 for Electric Equipment and Appliance Manufacturing. No set-aside preferences or specific eligibility criteria are indicated, and the procurement is open to qualified subcontractors capable of delivering fully qualified, inspected, and packaged cable assemblies to federal military standards. All deliverables must include certification of compliance with specified documentation and inspection protocols prior to acceptance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.

Commercial Printing (except Screen and Books)

POSTED

about 16 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

POSTED

about 16 hours ago

DEADLINE

NUT, PLAIN, EXTENDED

Solicitation # SPE4A6-26-T-09HS

The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-08MV

The contract solicitation SPE4A6-26-T-08MV pertains to the procurement of a sleeve bearing with NSN 3120012860906, Quantity: 4 units, under a fixed-price delivery order. Delivery is required within 171 days after award, with FOB Origin terms, meaning title and risk transfer to the government upon delivery to the carrier at the contractor’s location. The sole approved sources are Kamatics Corporation and Roller Bearing Company of America, with specific part numbers mandated for compliance, and tooling or casting/forging may be required in manufacturing, for which contractors must seek assistance through DLA’s specialized forging and casting support channels if not already equipped. Packaging and preservation must fully comply with MIL-STD-2073-1E, using preservation method 33, clean and dry condition, preservation material 49, and wrapping material EA, with intermediate and unit containers coded E5 and packaging code U. Marking requirements adhere strictly to MIL-STD-129, with no special marking codes applied, and bare item identification must be present per RQ017. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Quality assurance systems must align with SAE AS9003 or ISO 9001 tailored to AS9003. The offeror must hold a valid UEI and CAGE code and represent its small business status if claiming socioeconomic status such as WOSB, EDWOSB, SDVOSB, or HUBZone, and must provide UEIs for all joint venture partners if applicable. Invoicing is exclusively required through WAWF, and electronic submission of proposals is mandatory via DIBBS by the deadline of August 5, 2026. Compliance with multiple DFARS clauses is enforced, including safeguarding covered defense information (252.204-7012), prohibition of hexavalent chromium (252.223-7008), export control (

Support Activities for Coal Mining

POSTED

about 16 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-04MJ

The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-09HR

The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

NUT, PLAIN, SLOTTED, H

Solicitation # SPE4A6-26-T-08RR

The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

PIN, STRAIGHT, THREAD

Solicitation # SPE4A6-26-T-02AQ

The contract is for the procurement of 30 straight threaded pins identified by the NSN 5315-01-424-1861 under solicitation number SPE4A6-26-T-02AQ, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline of July 8, 2026, and is classified as a federal procurement under NAICS code 339993 which pertains to other miscellaneous fabricated metal product manufacturing. The place of performance and specific office address details are not provided, and no set-aside provisions are indicated, meaning the opportunity is open to all eligible contractors. The solicitation is accessible through the DIBBS system for potential vendors seeking to respond to the requirement.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-09KV

The contract solicits ten bushings, sleeves with NSN 3120010145565, sourced exclusively from the approved manufacturer Boeing under CAGE 81205 and part number 66-29042, designated as a critical application item requiring adherence to the Technical Data Package Revision A General 1 per reference QAP 13873 QAP-B02 Revision NR B dated 12/11/2013. Delivery is required within 20 days after award to Prince Sultan Air Base in Al Kharj, Saudi Arabia, under FOB Origin terms, with no variance permitted in quantity. All items must be packaged in accordance with MIL-STD-2073-1E, using QUP 001, preservation method 31, clean/dry condition 1, and no preservation material; packaging level is B with packaging code Q and unit container BL, intermediate container E5, and outer packaging indicator M. Marking must strictly conform to MIL-STD-129 with no special marking code applied, and palletization must meet DLA packaging requirements. Inspection and acceptance occur at origin, contingent upon compliance with FAR 52.246-2 and quality systems aligned with SAE AS9003 or ISO 9001 as tailored to AS9003. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, safety of covered defense information, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, whistleblower rights, subcontracting, and safeguarding government information, including specific compliance with NIST SP 800-171 and DFARS 252.204-7012. Offerors must certify their entity status via Unique Entity ID and CAGE code per DFARS 252.204-7017, disclose any covered defense telecommunications equipment or services, and submit Safety Data Sheets and hazard warning labels for all applicable hazardous materials under 29 CFR 1910.1200 and Federal Standard No. 313, unless exempt under specified federal statutes. Proposals must be submitted electronically via DIBBS by the deadline of July 31, 2026, and all invoicing must follow the WAWF system. The contract does not specify unit prices, total value, or award methodology, and it includes no option quantities

Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE