Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

POWER SUPPLY

Active
SPE7M1-26-T-220JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 45 power supply units identified by NSN 6120-01-705-6913 under solicitation SPE7M1-26-T-220J, with a delivery deadline of 181 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to source-controlled drawing requirements, meaning only the approved sources listed on the drawing are currently authorized, though additional approved sources may exist and have not yet been reflected. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Configuration changes require formal engineering change proposals and variance requests. Cybersecurity compliance mandates CMMC Level 2 certification, either through a self-assessment or third-party assessment by a certified organization. Technical data associated with the item is subject to strict export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and DLA authorization. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Michael Reese at the provided DLA contact information.

General Info

Procure 45 power units, deliver in 181 days, CMMC Level 2, ITAR/EAR controlled, New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-220J for DLA Maritime Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
POWER SUPPLY
POWER SUPPLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE7M1-26-T-220J
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6120-01-705-6913 Quantity: 45 EA Purchase Request: 7017226510QTY: 45 Delivery: 181 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
Manufacture and Supply of Convoluted Reinforce (NSN: 5975-00-602-5945)The contract requires the manufacture and delivery of 16 units of CONVOLUTE REINFORCE with part number CRN1137-3, a specialized electrical component designed for use in motor and generator systems. Each unit must meet precise military specifications and include full material traceability to ensure quality, reliability, and compliance with defense standards. The item is identified by the National Stock Number 5975-00-602-5945 and falls under the NAICS code 335311, which classifies the work within the Electrical Equipment and Appliance Manufacturing sector. The contract is structured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense, and is intended to support military hardware needs through secure, standardized production practices. Although no specific delivery location or point of contact is provided, the procurement is tied to DLA’s award system and is listed with a public record link for tracking purposes. The solicitation was posted in July 2026, indicating this is a planned future procurement requiring timely preparation and adherence to defense manufacturing protocols.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
DIBBS
Power Transformer Supply for DLAThe contract entails the supply of 16 military-specification power transformers, identified by NSN 5950-01-024-1940, to support operational requirements for the USS GUNSTON HALL. These transformers must meet strict military standards for performance, durability, and environmental resilience, and are subject to detailed packaging, labeling, and delivery protocols to ensure compatibility with Department of Defense logistics systems. The procurement is classified as a subcontract under the NAICS code 335311, indicating it is for electric transformer manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The award is linked to contract SPE7M526P4096, with a posted date of July 20, 2026, signaling the anticipated timeline for award and fulfillment. Delivery is targeted to the USS GUNSTON HALL, requiring precise coordination to meet operational deployment schedules and compliance with defense supply chain regulations.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
DIBBS
Manufacture of Special-Purpose Branched Electrical Cable AssemblyThe contract is for the design, fabrication, testing, and delivery of 23 specialized branched electrical cable assemblies that must meet stringent military specifications and comply with DLA technical requirements, including origin inspection to ensure adherence to sourcing and quality standards. The assemblies are classified as special-purpose components, indicating they are customized for unique operational environments or systems, and must be manufactured in full compliance with applicable defense industry protocols. The project is issued as a subcontract under the NAICS code 335311, which categorizes it within the Electrical Equipment and Wiring Assembly Manufacturing sector. Performance of the work is required at a designated location in Tracy, California, with a zip code of 95304-5000, and the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense, indicating this is part of a larger defense logistics and supply chain initiative. All units must pass rigorous quality control and inspection processes prior to delivery, and the contractor is expected to demonstrate full capability in meeting technical, schedule, and compliance benchmarks without deviation.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
Precision Optical Cable Assembly ManufacturingThe contract involves the manufacture of a military-specification optical cable assembly with part number ART-0500-X-X-G and NSN 6150017028231, designed for mission-critical defense applications where reliability, traceability, and durability are essential. The product must fully comply with all Department of Defense standards and DLA requirements, ensuring it meets the rigorous environmental, performance, and quality criteria necessary for operational use. Full component traceability and adherence to defense-grade manufacturing processes are non-negotiable, with strict documentation and control measures required throughout production. The solicitation is issued as a subcontract under NAICS code 335311 by the ASC Commodities Division of the Department of Defense, with performance required at Camp Lejeune, North Carolina, zip code 28542-0105. The opportunity was posted on July 20, 2026, and responses are due by July 28, 2026, leaving a narrow window for qualified suppliers to submit proposals. The contract details are accessible via the DIBBS platform, and potential bidders must demonstrate proven capability in producing defense-certified optical assemblies, with experience in meeting stringent military specifications and supporting defense logistics systems.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
Magnetic Contactor Manufacturing & SupplyThe contract involves the manufacturing and supply of eleven magnetic contactors conforming to the National Stock Number NSN 6110011235125 and applicable military specifications, intended for delivery to the Defense Logistics Agency’s San Joaquin location. The work is classified as a subcontract under the NAICS code 335311, which corresponds to the manufacturing of electric motors and generators, indicating that the contractor must meet rigorous defense-grade standards for performance, durability, and environmental resilience. Although the solicitation number and specific point of contact are not provided, the contract was posted on July 20, 2026, signaling an active procurement timeline within the Department of Defense infrastructure. Performance is expected to support military operations through reliable electrical control components, with no set-aside type specified, meaning the award is open to all qualified vendors regardless of business size or ownership characteristics.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
DIBBS
Power Transformer Supply and DeliveryThe contract involves the procurement and delivery of two power transformers designed to meet military compliance standards, including specialized packaging, labeling, and documentation for hazardous materials. All items must be shipped under FOB Origin terms, meaning the buyer assumes responsibility for transportation and associated risks once the transformers are loaded at the seller’s location. The work is linked to a subcontract under the NAICS code 335311, which pertains to electric transformer and power distribution equipment manufacturing, and is administered by the Department of Defense through the Maritime Supply Chain office. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with the opportunity accessible through the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
Power Transformer ManufacturingThe contract requires full manufacturing of a military-specification power transformer aligned with MIL-T-31000 standards and listed under DLA Master List RA001, demanding strict adherence to all technical and quality requirements. Engineering source approval is mandatory, and comprehensive critical process documentation must be maintained and submitted throughout production. The transformer must also undergo rigorous shock testing to ensure operational reliability under extreme environmental conditions typical of military applications. Performance is to be executed in San Diego, California, with all deliverables subject to Department of Defense oversight through the Active Devices Division. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is issued as a subcontract under NAICS code 335311 for electrical equipment manufacturing. Participation requires proven capability in defense-grade transformer fabrication, full compliance with federal defense procurement protocols, and the ability to support military logistics through certified documentation and quality control measures.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
Cable Assembly Manufacturing & TestingThe contract calls for the full-scale production of military-spec cable assemblies requiring precise crimping, termination, shielding, and comprehensive electrical testing to verify continuity and dielectric strength. All work must adhere to stringent defense standards to ensure reliability under harsh operational conditions. The place of performance is fixed at New Cumberland, Pennsylvania, with the contract issued under NAICS code 335311 for electrical component manufacturing. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, with responses due by July 28, 2026. The solicitation is open through the DIBBS portal and requires full compliance with military-grade specifications for materials, processes, and testing protocols.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
Supply of Alternating Current Motor (NSN: 6105015754869)The contract entails the procurement and delivery of 53 units of an alternating current motor identified by NSN 6105015754869, manufactured and supplied in full compliance with Department of Defense logistics standards. All units must meet precise NSN specifications, including proper packaging and marking requirements to ensure traceability, readiness, and integration into military supply chains. The work is being executed under a subcontract aligned with NAICS code 335311, indicating focus on electric motor, generator, and transformer manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, with performance obligations tied to DoD logistical frameworks, though specific delivery location and point of contact details are not provided. The contract is accessible through the DIBBS system under award number SPE7M026V4749.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
DIBBS
CONTACTOR, MAGNETICThis contract specifies the procurement of a magnetic contactor with part number 4281003-9 and NSN 6110012173945, for a quantity of two units, to be delivered FOB origin within 168 days. The item is designated as a critical application item and must comply with strict DLA packaging and handling standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All packaging must incorporate ESD and EMI protective measures per MIL-PRF-81705, requiring Type I and Type III barrier materials from qualified manufacturers listed on QPL-81705 unless otherwise specified. The supplier is responsible for ensuring that all ESD/EMI protective materials meet these standards and for providing technical packaging data if the solicitation does not explicitly require them. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the product, except for specified functional uses in batteries, lighting, instruments, weapon systems, or reagents approved by NAVSEA, with portable devices requiring shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is April 19, 2027, with an earlier need date of January 5, 2027. The procurement is governed under solicitation SPE7M1-26-T-193H and incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance verified against the applicable revision date. No variance in quantity is permitted, and inspection and acceptance occur at the destination. The contract is issued under a Federal solicitation with NAICS code 335311, and the primary point of contact is Michael Reese of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POTENTIThe contract pertains to the procurement of three transformers designated by NSN 5950-01-167-4976 under solicitation SPE4A5-26-T-296P, with a delivery requirement of 165 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to stringent documentation and compliance controls including source approval requests, configuration change management via engineering change proposals, and variance requests for deviations. Packaging must adhere to DLA standards, and physical identification of the item must follow specified marking protocols. Sampling and inspection are to conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs corresponding to critical, major, or minor classifications. The transformer contains technical data subject to export controls under either ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, regardless of location. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export-control training, and explicit approval from DLA. DFARS 252.225-7048 governs compliance with export restrictions. Measuring and test equipment must meet RT001 requirements, and government identification must be removed from non-accepted supplies as per RQ011. Although item unique identification is not required per the Service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance at Hill AFB, and inquiries should be directed to Danielle Richardson at the provided contact details.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICALThis contract is for the procurement of 44 electrical coils with NSN 5950-01-411-9561 and part number 851019-024VDC, supplied by approved vendors including AMZ ALABAMA INC., PARKER-HANNIFIN CORPORATION, and BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP. The item is classified as critical application and must comply with strict restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware except in specific exempted cases such as functional use in batteries, fluorescent lights, instrument sensors, weapon systems, or chemical reagents specified by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract requires full adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit packaging codes, with marking fully aligned to MIL-STD-129 and no special marking required. Delivery is FOB origin with a strict 168-day lead time, and the required delivery date is February 14, 2027. The item must be shipped to the designated DLA distribution center in Tracy, California, with transportation procedures governed by DLAD Proc Note C19 and C20. No quantity variance is permitted, and inspection and acceptance will occur at the destination. The purchase request number is 7017439165, and the total contract value is $1,936 at $44.00 per unit. The solicitation was issued under contract number SPE7L4-26-T-5526 with a response deadline of July 23, 2026, and is classified under NAICS code 335311 for electrical equipment manufacturing.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334511
New
DIBBS
Small Business Subcontracting & Accelerated PaymentsSmall businesses are invited to subcontract under a Department of Defense opportunity managed by the Maritime Supply Chain, with accelerated payment terms available under FAR 52.232-40 to improve cash flow and financial agility. The contract is categorized under NAICS code 334511 and requires seamless integration into the prime contractor’s WAWF invoicing and compliance systems to ensure efficient financial processing and regulatory alignment. Subcontractors must be prepared to meet all system requirements for electronic submission and documentation to qualify for accelerated payments. The solicitation is open with a narrow response window, closing just three days after posting, and no set-aside designation is specified, meaning eligibility is based on the ability to perform under the stated terms rather than size or status-based preferences. Interested parties should act swiftly and ensure full technical and administrative readiness to interface with the prime’s automated systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight & U.S.-Flag Vessel TransportationThe contract requires the provision of ocean freight services using U.S.-flag vessels in full compliance with the Jones Act, ensuring that all transportation of supplies adheres to federal regulations governing maritime commerce. When U.S.-flag vessels are unavailable to meet required schedules or capacity needs, the contractor must prepare and submit waiver requests to secure authorization for alternative vessel arrangements. This subcontract is tied to the Department of Defense’s Maritime Supply Chain and is classified under NAICS code 483111, which pertains to deep sea, coastal, and Great Lakes water transportation. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, indicating a rapid procurement timeline. Performance of the contract may occur across unspecified locations, as no specific place of performance is designated, but the focus is clearly on ensuring reliable and compliant maritime logistics support for defense-related supply needs.
Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract requires the identification, documentation, and proper labeling of hazardous materials in strict accordance with OSHA’s Hazard Communication Standard and Department of Defense regulations. Contractors must ensure all hazardous substances are accurately cataloged, clearly labeled with required hazard warnings, and accompanied by comprehensive safety data documentation to meet federal compliance standards. Work must be performed to support the Maritime Supply Chain under the Department of Defense, with a focus on maintaining operational safety and regulatory alignment across all handling and storage environments. The solicitation is structured as a subcontract with a narrow response window, closing just three days after posting on July 23, 2026, indicating an urgent need for qualified providers. The North American Industry Classification System code 541620 points to specialized environmental and scientific consulting services, emphasizing the technical expertise required for accurate hazardous material management. Performance is expected to support DoD logistics infrastructure, though specific geographic location details are not provided, suggesting the work may span multiple sites under the Maritime Supply Chain’s jurisdiction.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with DFARS cyber incident reporting requirements. It is structured as a subcontract under the Department of Defense, specifically managed by the Maritime Supply Chain agency, and falls under NAICS code 541512 for computer systems design services. The primary focus is on establishing a robust cybersecurity framework that aligns with federal standards to protect sensitive defense data and respond promptly to any cyber incidents as mandated by regulation. The solicitation is open for a very limited window, with responses due by July 23, 2026, and posted on July 20, 2026, indicating a tight turnaround for interested parties. The place of performance and point of contact details are not specified, suggesting flexibility in execution locations, but the requirement to adhere to NIST and DFARS standards is absolute. Compliance with these controls is not optional; failure to implement or maintain them could result in contract breach, loss of eligibility, or reporting obligations. Contractors must demonstrate proven experience in securing controlled unclassified information and maintaining continuous compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
Electromechanical Toggle Switch SupplyThe contract calls for the supply of a Defense Department-compliant electromechanical toggle switch identified by NSN 5930005221425, requiring strict adherence to all military specifications for inspection, packaging, and hazardous material handling. The product must meet rigorous DoD standards to ensure reliability, safety, and compatibility with existing military systems, with no deviations permitted in manufacturing, testing, or documentation. All units must be fully traceable and prepared for immediate deployment in operational environments governed by federal defense protocols. The solicitation is posted as a subcontract under NAICS code 334511 and is managed by the Department of Defense through the Maritime Supply Chain organization. Interested parties must respond by July 23, 2026, at 5:00 PM, with no flexibility in deadline adherence. The contracting activity is conducted entirely through the DIBBS platform, and bidders are expected to comply with all procurement guidelines tied to federal subcontracting under defense contracts. While specific delivery locations and point of contact details are not provided, performance is expected to align with overarching DoD logistics and supply chain requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation and Reverse Engineering SupportThe contract seeks the development of comprehensive technical data packages for defense-related systems, including manufacturing drawings, process sheets, and shock test reports compliant with MIL-S-901 and DI-ENVR-80706 standards. The scope includes potential reverse engineering analysis to support documentation and manufacturing readiness, ensuring accurate reproduction or modification of existing components. All deliverables must meet stringent military specifications and be tailored for production use within defense supply chains. This is a small business set-aside subcontract under NAICS code 541330, administered by the Department of Defense through its Maritime Supply Chain division. The opportunity was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapidly timed procurement cycle. The work is expected to support critical defense infrastructure, requiring precise technical execution and adherence to government standards, though the specific place of performance and point of contact are not provided in the available data.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488999
New
DIBBS
Hazardous and Radioactive Material Handling & TransportationThe contract is for the safe handling, labeling, and transportation of hazardous and radioactive materials, requiring strict adherence to Department of Transportation, Occupational Safety and Health Administration, and military standards. It includes responsibilities for FOB coordination and thorough vetting of carriers to ensure compliance and operational integrity throughout the supply chain. All activities must meet or exceed regulatory requirements for security, documentation, and employee safety, particularly when transporting sensitive or dangerous goods within defense-related operations. This is a total small business set-aside subcontract under the NAICS code 488999, issued by the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a compressed timeline for qualified small businesses to submit proposals. Performance location details are unspecified, suggesting flexibility based on operational needs, but all work must align with federal, military, and industry-specific protocols for hazardous material management. Participation is limited to small business concerns as defined under SBA regulations.
All Other Support Activities for Transportation

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Supply of Filter Elements for Engine Fuel Pumps (NSN: 4330004718599)The contract is a total small business set-aside under the SBA program for the supply of filter elements with NSN 4330004718599, which must comply with military specifications for use in engine fuel pumps. Delivery is structured under future delivery orders to be issued by the Department of Defense through the Maritime Supply Chain, with shipments made FOB origin meaning the buyer assumes responsibility once goods leave the supplier’s facility. The item is classified under NAICS code 332996, indicating it involves other fabricated metal product manufacturing, and the solicitation is exclusively reserved for small businesses as defined by the Small Business Administration. The deadline to respond is set for July 23, 2026, with the solicitation posted on July 20, 2026, through the DIBBS platform, indicating the procurement is being managed under a subcontracting framework to support defense logistics requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 322220
New
DIBBS
Packaging and Preservation of Sensitive/Military-Grade MaterialsThis contract requires the packaging and preservation of sensitive and military-grade materials in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring secure, standardized handling for defense applications. All items, particularly mercury-containing devices, must be enclosed in shockproof packaging to prevent damage during transport and storage, and must be properly marked with accurate barcoding systems as mandated by federal military specifications. The work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the NAICS code 322220 indicating the primary industrial classification applies to paperboard container manufacturing. The solicitation is closed to responses after July 23, 2026, and the award will be managed under the Maritime Supply Chain division of the Department of Defense, with performance expected to support defense logistics requirements across unspecified locations.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract entails the preparation, submission, and ongoing management of Safety Data Sheets for hazardous materials in full alignment with OSHA’s 29 CFR 1910.1200 regulations, ensuring all documentation meets federal safety and compliance standards. This includes continuous monitoring and implementation of regulatory updates, with responsibilities extending to the accurate flow-down of updated SDS requirements to all subcontractors involved in the supply chain. The work is structured to maintain consistent compliance across all tiers of operations, emphasizing timely communication and documentation integrity. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the Maritime Supply Chain office, with a competitive bid window closing on July 23, 2026. The solicitation is open exclusively to certified small businesses, reflecting a federal commitment to fostering small business participation in critical safety compliance services. All activities are expected to be performed in support of defense-related logistics, requiring rigorous adherence to federal hazardous materials handling standards and proactive responsiveness to evolving regulatory requirements.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Transportation and Delivery Coordination via Sea FreightThe contract requires coordination of sea freight transportation to deliver valve seats to the USNS MT WHITNEY at FPO AE 09517-3310, with strict adherence to DLA procedures and a mandatory 5-day FOB destination delivery timeline. All logistics must be structured to meet military supply chain standards, ensuring timely and compliant movement of goods under the Department of Defense’s maritime supply chain oversight. The performance location is specified as a floating military postal address, indicating delivery to a vessel at sea or in a designated naval port, necessitating precise coordination with naval logistics teams. This is a subcontract under NAICS code 483111, which pertains to coastal and Great Lakes water transportation, and was posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity falls under the Agency Name MARITIME SUPPLY CHAIN and the Department of Defense, requiring bidders to align with federal defense logistics protocols. The absence of solicitation number or point of contact suggests reliance on the DIBBS portal for detailed submission guidance and documentation, and all operations must be executed within the stringent timelines and regulatory framework governing military maritime deliveries.
Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the provision of compliant packaging, labeling, and hazard communication documentation specifically for valve seats, ensuring full adherence to regulatory standards. This includes the preparation and delivery of Safety Data Sheets (SDS) and OSHA-compliant hazard labels that accurately convey chemical and physical risks associated with the product. The documentation must meet all federal requirements for workplace safety and transport regulations, with emphasis on clarity, accuracy, and alignment with current OSHA and GHS guidelines. This is a subcontract under the Department of Defense’s Maritime Supply Chain, with performance required at FPO, 09517-3310. The solicitation, identified by the NAICS code 541380 for other scientific and technical consulting services, was posted on July 20, 2026, and responses are due by July 31, 2026. All submitted materials must be thoroughly vetted for compliance before delivery, and failure to meet labeling or documentation standards could result in rejection or contract non-fulfillment. The work scope is strictly focused on hazard communication and packaging compliance, with no mention of manufacturing or supply of the valve seats themselves.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details