Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cable Assembly Manufacturing – NSN 6150016275151

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of a military-spec cable assembly identified by NSN 6150016275151, adhering strictly to defense standards for performance, durability, and reliability. The scope encompasses full-cycle production including material sourcing, assembly, rigorous quality control protocols, proper packaging, and timely shipment to the prime contractor’s designated facility. All components and processes must comply with military specifications to ensure compatibility and operational readiness in demanding environments. This subcontract falls under NAICS code 335929 and is managed by the Defense Logistics Agency under the Department of Defense. The project is scheduled to be awarded following a solicitation posted on July 17, 2026, with no set-aside provisions specified. While the exact delivery location and point of contact are not provided, performance is expected to meet all military logistics requirements as defined by the agency. The contract is linked to DIBBS award record SPE4A626P9542, indicating formal tracking and compliance oversight within the defense procurement system.

General Info

Manufacture and deliver military-spec cable assembly per defense standards to DLA by 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of a military-spec cable assembly per NSN 6150016275151, including material sourcing, production, quality control, packaging, and delivery to the prime contractor's facility.

Similar Contracts

Same NAICS industry code

Cable Assembly Manufacturing and TestingThe contract encompasses the full lifecycle production of a specialized military cable assembly, requiring end-to-end execution from fabrication through final testing and delivery. All manufacturing processes must adhere to strict quality standards including ISO 9001:2015, with comprehensive quality assurance procedures applied at every stage. The deliverables must pass a formal first article inspection and comply with MIL-STD-129 for packaging and labeling, ensuring traceability and readiness for military logistics. Additionally, the contractor is required to implement and maintain robust cybersecurity controls in alignment with NIST SP 800-171 and achieve CMMC compliance, reflecting the sensitive nature of the hardware and accompanying data. Production activities are expected to occur under the oversight of the ASC Commodities Division within the Department of Defense, though the precise performance location is not specified. The solicitation, titled Cable Assembly Manufacturing and Testing, was posted on July 23, 2026, with responses due by August 22, 2026. It is classified as a subcontract opportunity under NAICS code 335929, which pertains to other electrical equipment and component manufacturing. There is no set-aside designation or specific point of contact provided, and performance details including location remain unspecified. Contractors must be prepared to meet all technical, quality, and cybersecurity requirements without deviation, as failure to comply could result in rejection of proposals or non-performance penalties. The contract is accessible via the DIBBS portal and expects capable suppliers with proven expertise in defense-grade cable systems and certified compliance programs.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE, SPECIAL PURPOThe contract pertains to the procurement of a special-purpose electrical cable identified by NSN 6145-01-561-8975 and part number 22SP1P01-21, with a unit of issue changed from EA to FT effective July 1, 2016. The requirement is for 500 feet of cable to be delivered within five days under FOB origin terms, with a quantity variance allowance of plus 10 percent and no tolerance for negative variation. Inspection and acceptance occur at the destination, and preservation and packaging must comply with MIL-DTL-12000 and MIL-STD-2073-1E standards, including marking per MIL-STD-129. Packaging must adhere to DLA’s procurement requirements, with no parcel post allowed; shipments must use the fastest traceable means. The delivery address is the Fleet Readiness Center Southeast in Jacksonville, Florida, with specific freight and parcel post addresses provided. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. All technical and quality specifications are referenced by R and I numbers from the DLA master list. The solicitation number is SPE7M0-26-T-018C, with a required delivery date of July 23, 2026, and response deadline of August 3, 2026. The NAICS code is 335929, and the contracting activity is under the Department of Defense’s Maritime Supply Chain ESOc Buys.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CABLE ASSEMBLY, POWER, EThe contractor must supply 102 cable assemblies, each with a minimum length of 150 feet, meeting strict technical and quality standards outlined in NAVSEA S9320-AM-PRO-020/MLDG. All production must occur at a facility currently certified under PRO-020, and this certification must remain valid throughout the contract period, with proof available upon request. The contractor is required to adhere to PRO-020’s mandates for molding operations, materials selection, process controls, inspections, testing, and documentation. The item is subject to export control under ITAR or EAR, restricting the dissemination of technical data to foreign persons without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program certification, who have completed required training and the DLA questionnaire, are permitted access to the controlled technical data. The assembly must not contain mercury or mercury compounds unless explicitly exempted for functional components like batteries or sensors, and any exempted mercury-containing items must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must meet DLA requirements, government identification must be removed from non-accepted items, and bare items must be physically marked. The contract is a total small business set-aside with a 102-day delivery deadline starting from award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE, RADIO FREQUENThe contract specifies the procurement of 1,500 feet of continuous radio frequency cable, designated as LMR-240 through part number 6145-01-517-6451, intended for critical microwave systems applications. The cable must be supplied in a single continuous length unless the advice code indicates otherwise, with advice codes 2N, 28, or 34 requiring uninterrupted spooling and codes 2P or 39 permitting multiple unit packs—where conflicts arise, the advice code takes precedent over the schedule. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation and packaging, with marking adhering to MIL-STD-129 and palletization governed by DLA’s packaging requirements. The item is to be delivered FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a delivery window of 168 days from contract award and a permitted quantity variance of plus or minus five percent. Inspection and acceptance occur at the destination, and the contract enforces strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7M1-26-T-228T, with a response deadline of August 3, 2026, and the required ship date is January 19, 2027, with an original delivery due date of January 26, 2027. The point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain organization.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract is for the procurement of 318 units of a special-purpose electrical cable assembly identified by NSN 6150-01-506-9685, with a delivery deadline of 451 days after award. The item is governed by strict export control regulations under either ITAR or EAR, meaning all technical data associated with it is restricted and cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training on handling export-controlled technical data and submitted the DLA questionnaire, are permitted access. The solicitation was issued by the Department of Defense’s ASC Commodities Division under reference SPE4A6-26-R-0262, with proposals due by August 22, 2026, and publicly posted on July 23, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE, SPECIAL PURPOSE,This contract specifies the procurement of a special-purpose electrical cable with a total length of 285 feet, supplied as one continuous length on a 250-foot reel. The item is identified by NSN 6145-00-184-4343 and is solicited under SPE7M1-26-T-223M with a response deadline of August 3, 2026, and a delivery requirement of 168 days after award. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, ensuring compliance with the revision in effect on the RFP issue date for large acquisitions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The alternate offeror must provide a complete data package, including all technical data for both the approved and alternate parts, as no data is currently available. The place of performance is New Cumberland, PA, and the contracting office is under the Department of Defense’s Maritime Supply Chain, with Alisha Blanton as the primary point of contact.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE, POWER, ELECTRIThe contract specifies the procurement of 3,000 linear feet of electrical cable identified by NSN 6145016231184, with delivery required within 168 days to the Defense Logistics Agency distribution facility in Tracy, California. The cable must be supplied in continuous length, with packaging and preservation strictly compliant with MIL-STD-2073-1E and MIL-DTL-12000, and marked in accordance with MIL-STD-129. The qualified products list applies as this item is listed as a primary QPL or QML, and the configuration and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with revisions controlled based on solicitation timing. Advice code determinations dictate packaging formats—continuous lengths are mandatory under codes 2N, 28, or 34, while 2P or 39 allow multiple unit packs, with advice code taking precedence over schedule inconsistencies. The procurement is under a fixed-price arrangement with a 5% quantity variance allowance, delivered FOB origin, and accepted at destination. Packaging and palletization must meet DLA’s RP001 standards, and all materials must conform to the latest NEMA WC 27500-2025 standard. The contract was solicited under SPE7M1-26-T-231G, with a response deadline in August 2026 and a required ship date of January 2027. Point of contact is Alisha Blanton at DLA, and all shipments must comply with DLAD procedural notes C19 and C20 for transportation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

BELDEN 18AWG 6 PAIR CABLE

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture, testing, and delivery of six special-purpose electrical cable assemblies identified by NSN 5995-01-091-6410, in full compliance with specified technical drawings and applicable military standards. All units must meet rigorous quality and performance criteria to ensure operational reliability under demanding conditions, with exacting attention to materials, construction, and electrical characteristics. The work is to be performed under a subcontract arrangement, and the deliverables must be completed and submitted by the response deadline of July 30, 2026. The solicitation is managed by the ASC Commodities Division within the Department of Defense under NAICS code 335929, which categorizes it under Other Electrical Equipment and Component Manufacturing. The contract was posted on July 22, 2026, and all interested parties must submit proposals by the deadline. The place of performance and point of contact details are not provided, but all work and delivery must adhere to military specifications and be traceable through documented compliance procedures. The official solicitation can be accessed via the DIBBS portal for additional procedural requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIALThe contract is for the procurement of six cable assemblies of a special-purpose electrical nature, identified by NSN 5995-01-091-6410 and associated with Purchase Request 7017572408. The delivery must be completed within 150 days after order placement. This is a federal solicitation issued by the ASC Commodities Division under the Department of Defense, with the solicitation number SPE4A6-26-Q-1200, posted on July 22, 2026, and responses due by July 30, 2026. Production lot testing is required and must be conducted at the designated government test location W31P0W. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, and any disclosure — including to foreign nationals within the United States — requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs this data, and only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and approved through the DLA questionnaire may access the technical data. The primary point of contact is Amanda Stewart, reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aluminum Triplex Cable Manufacturing and Supply

Nashville Electric Service

POSTED

DEADLINE

CableThe cable specified is a 600-volt aluminum conductor cable with cross-linked polyethylene insulation, rated for 90 degrees Celsius and compliant with ICEA standards and UL labeling. It features two 4/0 AWG 19-strand aluminum conductors and one 2/0 AWG 19-strand aluminum neutral conductor, with the neutral insulated in white or yellow striped marking. The insulation must be a minimum of 5/64 inch thick, and the cable must be imprinted with the manufacturer’s name, size, “AL 600V XLPE,” and the year of manufacture. The neutral conductor must include sequential footage markings, and all cable ends must be sealed to prevent water ingress. Approved manufacturers include Prysmian, Southwire, GenCabl, and NexN, with codenames REGIS/XLP/EYS or SWEETBRIAR/XLP/EYS. Cable must be shipped on wooden reels with either wood or steel drums, each equipped with a metal center hub collar. Reel dimensions are limited to a maximum of 42 inches by 28 inches by 21 inches, with approximately 1000 circuit feet per reel. Each reel must be clearly stamped with tare weight, net weight, and gross weight. The solicitation is issued by Nashville Electric Service in Tennessee under solicitation number Z4843, with a response deadline of August 3, 2026, and a close date of March 2, 2026. Primary point of contact for procurement inquiries is Tiffany Caruthers, reachable at tcaruthers@nespower.com.

Nashville Electric Service

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 5 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 5 hours ago

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

about 5 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information

Computer Systems Design Services

POSTED

DEADLINE

Hazard Communication & Regulatory Compliance Support

Environmental Consulting Services

POSTED

DEADLINE

Packaging and Labeling Services for Hazardous/Regulated Items

All Other Support Services

POSTED

DEADLINE

Supply of Respirator Cartridges (Air Filtering)

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Quality Assurance and Third-Party Certification Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE