Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, POWE

Active
SPE4A6-26-T-05NQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits the procurement of eight units of a power cable assembly identified by NSN 6150-01-351-3351, with a delivery deadline of 87 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined based on the solicitation issue date or award date depending on the acquisition scale. The item is subject to defense data controls under RD002 and must comply with DLA packaging standards, tailored quality requirements for manufacturers and non-manufacturers, and inspection acceptance procedures at the origin. Government identification must be removed from any non-accepted supplies. The technical data associated with this item is classified under export control regulations, either ITAR or EAR, making unauthorized disclosure or export—including to foreign nationals in the U.S.—a violation. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval. The solicitation, issued under number SPE4A6-26-T-05NQ, was posted on July 13, 2026, with responses due by July 21, 2026, and is managed by the Department of Defense's ASC Commodities Division, with performance required at Texarkana, Texas, 75507-5000. Point of contact for inquiries is Traci Beaudoin at traci.beaudoin@dla.mil.

General Info

Procure eight power cable assemblies per NSN 6150-01-351-3351, deliver in 87 days, comply with DLA and export control rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05NQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
TRACI BEAUDOIN
contact@example.gov

Full Description

Show more
CABLE ASSEMBLY,POWE
CABLE ASSEMBLY, POWER,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-351-3351 Quantity: 8 EA Purchase Request: 7015599749QTY: 8 Delivery: 87 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
ELECTRON TUBEThis contract solicitation is for the procurement of 34 electron tubes identified by NSN 5960-01-467-0961 under a Small Business Set-Aside, with a response deadline of July 24, 2026 and a delivery requirement of 345 days after award. The item is designated as a restricted source requiring engineering source approval from the government design control activity. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issuance or award date. Compliance with CMMC Level 2 Cybersecurity Self-Assessment is mandatory, and the contract is subject to requirements covering defense information. Configuration changes necessitate an Engineering Change Proposal with formal variance or waiver requests, and any non-accepted supplies must have government identification removed. Offerors must submit comprehensive documentation per MIL-T-31000 including all manufacturing drawings, detailed process and inspection sheets, identification of critical process suppliers, purchase order copies, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If original OEM drawings are unavailable, an engineering analysis detailing development methodology is required, including full documentation of any reverse engineering procedures such as sample counts, measurement techniques, data compilation, and justifications for dimensional tolerances and acceptance criteria. All submitted data will be reviewed by the government’s engineering support activity. The solicitation is managed by the Department of Defense’s Active Devices Division with primary point of contact Thomas Mitchell.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract is for a special-purpose electrical cable assembly identified by NSN 6150-01-259-4632, with a quantity of 14 units, issued under solicitation SPE4A6-26-T-05NM by the Defense Logistics Agency’s Commodities Division. The item is subject to strict export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer of technical data to foreign persons, including foreign national employees and overseas subsidiaries. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Packaging must adhere to DLA’s procurement requirements, and the assembly must be physically marked in accordance with specified identification standards. The contract is set aside for Service-Disabled Veteran-Owned Small Business Concerns, with a NAICS code of 334419 and a delivery period of 224 days after award. The place of performance is New Cumberland, Pennsylvania, and inquiries may be directed to Amanda Stewart, the primary point of contact. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and includes a requirement for the vendor to hold CMMC Level 2 certification as a third-party assessment organization. Compliance with cybersecurity standards is mandatory to ensure the protection of controlled technical data throughout the supply chain. The contract also enforces full adherence to DFARS 252.225-7048 regarding the handling and safeguarding of export-controlled information. Vendors must demonstrate capability to meet all physical marking, packaging, cybersecurity, and export compliance obligations prior to contract award. Failure to comply with any of these requirements will render a bid nonresponsive.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to the procurement of a cable assembly with the NSN 5995-01-569-4420, quantity of 120 units, under solicitation SPE4A6-26-T-02WW. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E with specific handling, preservation, and marking protocols per MIL-STD-129 and RP001. Sampling for quality verification follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, and acceptance requires zero non-conformances unless otherwise stipulated. The contract mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. Delivery is FOB origin with no variance allowed in quantity, and the item must be delivered to the designated DLA Distribution facility in New Cumberland, PA, with a required delivery date of August 7, 2027. The contractor is responsible for palletization, labeling, and shipping in accordance with DLA procedural notes C19 and C20, and unit of issue is EA, with pricing set at $120.00 per unit. All government identification must be removed from non-accepted supplies, and physical marking of the bare item must conform to RQ017 requirements.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
BRACKET, PIPE, SECTThe item is a bracket for pipe section with NSN 5342-01-314-3610 and a quantity of 142 units, solicited under contract number SPE4A7-26-T-567K with a response deadline of July 21, 2026, and a delivery requirement of 73 days after order. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and applying equally to foreign nationals employed by U.S. companies or their subsidiaries. Access to this controlled data is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have been formally approved by the DLA authority. DFARS 252.225-7048 governs the handling and protection of this data. The solicitation is issued by the Department of Defense under agency name ASC SUPPLIER OPER AE AND AF DIV, with performance located in Tracy, California, 95304-5000, and point of contact is Tamera Greene at tamera.greene@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVEThis contract pertains to the procurement of a sensitive switch item, identified by NSN 5930-00-666-1927 and part numbers 3HF5 and 316, with a requirement for eleven units to be delivered FOB origin within 132 days. The item is classified as a critical application component, subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and must comply with MIL-DTL-28786 for preservation and packaging. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and the packaging must include shock-proof containment for any mercury-containing components permitted only in specific functional applications such as batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA, with a secondary containment boundary mandated. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination, and the item must be shipped by the required date of December 3, 2024, despite the original delivery window extending to June 22, 2025. The contract is a total small business set-aside under NAICS code 334419, issued under solicitation SPE7M8-26-T-5383 with a unit price of $11.00 per unit, and no variance in quantity is permitted. All hazardous material shipping follows DLAD Proc Note C19 and C20, and the mercury restriction applies strictly unless explicitly exempted by NAVSEA specifications.
ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details