Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, RADI

Active
SPE4A6-26-R-XB81Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a radio frequency cable assembly with NSN 5995-01-283-3311, with a quantity of 100 units requiring delivery within 163 days after order. This procurement is a total small business set-aside under FAR 19.5, issued by the ASC Commodities Division under the U.S. Department of Defense. The solicitation remains open until August 7, 2026, and is publicly accessible through the DIBBS system. The contract incorporates all technical and quality requirements listed in the DLA Master List, with the applicable revision determined by the solicitation issuance date. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and the item is subject to covered defense information protocols. Packaging must adhere to DLA standards, and manufacturers and non-manufacturers must meet tailored higher-level quality requirements. Configuration changes require formal engineering change proposals for any deviation or waiver. All supplies must be marked per physical identification requirements, and any non-accepted items must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and formal approval by DLA.

General Info

100 RF cable assemblies, small business set-aside, CMMC Level 2, ITAR/EAR controlled, delivery in 163 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A6-26-R-XB81 DLA Aviation Jul 28 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Joshua Tuggle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY, RADIO FREQUENCY
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5995-01-283-3311 Quantity: 100 EA Delivery: 163 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
Qualified Manufacturer Sourcing for Electrical ConnectorsThe contract entails the supply of electrical connectors identified by NSN 5935-01-025-9618, which must be manufactured by a supplier qualified under the Defense Logistics Agency’s Qualified Products List or Qualified Manufacturer List for Federal Supply Class 5935. All products must fully comply with applicable military specifications and include complete traceability documentation to ensure authenticity, quality, and adherence to defense standards. The work is sourced as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 334417 which pertains to other electrical equipment and component manufacturing. The contract was posted on July 27, 2026, and the performance location and point of contact are unspecified, with the procurement managed through the DIBBS system via the reference contract SPE7M226P3139.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of electrical plug connectors identified by part number M39012/30-0503 and NSN 5935004304109, with a total quantity of 360 units divided into two line items: 36 units at $7017602347-0001 and 324 units at $7017602347-0002, both at a unit price of $1.00. Delivery is required within 84 days from the contract date, with FOB origin terms, zero variance in quantity, and inspection and acceptance occurring at the destination. The item is classified as a commercial item and must comply with MIL-PRF-39012F Sup 1 and MIL-PRF-39012/30J specifications. It is subject to strict quality and technical requirements mandated by the DLA Master List of Technical and Quality Requirements, which override all other standards. Zero-defect sampling is required under MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. The product must be marked and packaged per MIL-STD-129, commercially packaged per ASTM D3951 unless hazardous, in which case Fed-Std-313 IP025 applies, and palletization must meet DLA packaging rules. Use of ozone-depleting substances is prohibited unless prior written approval is obtained, and the item is restricted to qualified products listed under QPL for FSC 5935. Two distinct delivery addresses are specified—one for San Diego, CA and one for Robins AFB, GA—with required ship dates of January 15, 2026 and January 1, 2027 respectively, though the original delivery deadline for both is December 5, 2026. All documentation and compliance must adhere to DLA procedures and the solicitation SPE7M5-26-T-354T, issued under NASIC code 334417 by the Department of Defense's Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, PLUThis contract specifies the procurement of 230 units of a dummy connector, plug, identified by drawing number 1555424 Revision W and NSN 5935-00-911-7195, under solicitation SPE7M5-26-T-327A. The item is source-controlled, meaning only approved manufacturers—DCX-Chol Enterprises Inc, Diehl Defence GmbH & Co. KG, ITT Cannon LLC, Thermal Electronics Inc, and BAE Systems—are eligible to supply the component, and all delivered units must strictly conform to the drawing and associated limited rights data, which the government does not provide. Offerors must have direct access to this data or traceability to the approved sources, and any new vendors seeking qualification must contact the cognizant design activity. The contract prohibits the use of ozone-depleting chemicals and intentional inclusion of mercury or mercury-containing compounds, except for specific functional applications like batteries, sensors, and instruments specified by NAVSEA, which must include a secondary containment. Packaging must comply with MIL-STD-2073-1E using a clean/dry preservation method, unit pack with sealed plastic bag and fiberboard box, and labeling must adhere to MIL-STD-129 with no special marking required. Delivery is FOB origin, with a 186-day ADO timeline, and inspection and acceptance occur at the destination location, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates electronic invoicing and receiving reports through WAWF and requires compliance with all applicable cybersecurity standards, including NIST SP 800-171 and safeguarding of covered defense information under DFARS 252.204-7012. Offerors must also certify compliance with federal regulations on trafficking in persons, employment eligibility verification, sustainable products, and hazardous materials handling. The solicitation incorporates numerous FAR and DFARS clauses related to subcontracting, changes, inspection, default, payment, whistleblower rights, cybersecurity, and prohibitions on acquiring equipment from designated Chinese vendors or using hexavalent chromium. Socioeconomic set-asides for small businesses, WOSB, SDVOSB, HUBZone, and 8(a) firms are eligible, and the contract is subject to all applicable federal procurement rules with no defined contract type specified but clearly fixed-price in nature given the clauses referenced.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract is for the procurement of 14 units of a CONNECTOR, RECEPTACL identified by NSN 5935-01-699-2808 under solicitation SPE7M5-26-T-330T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 72 days of order receipt, with a mandatory delivery date of October 8, 2026, and shipment must be FOB Origin to the designated receiving warehouse in Tracy, California. Full and open competition applies, and the contract follows simplified acquisition procedures. The item must meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling, barcoding, and palletization per RP001, while hazardous materials require adherence to FED-STD-313 and TQ Requirement IP025, and non-hazardous items must be commercially packaged. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0, and any unspecified attributes are deemed major. Acceptance requires zero non-conformances if sampling is based on MIL-STD-105/ASQ Z1.4 unless otherwise noted. The contractor must comply with stringent cybersecurity mandates including DFARS 252.204-7012 for safeguarding covered defense information and 252.240-7997 for NIST SP 800-171 compliance, submitting an assessment score via the Supplier Performance Risk System. Export-controlled items are restricted under DFARS 252.225-7048, and the use of telecommunications equipment from prohibited entities such as Huawei or ZTE is banned
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLEThe contract solicits 162 units of a connector, receptacle with NSN 5935-01-599-8583, to be delivered FOB origin within 91 days after order receipt, with a required delivery date of October 27, 2026. All items must be packaged in strict compliance with MIL-STD-2073-1E, using preservation method 31 (cleaning and drying only, no chemical preservative), wrapped in FA material, and without cushioning or dunnage. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and each item must be marked per MIL-STD-129 with no special marking codes applied. Physical identification of bare items must follow RQ017, and hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200). Inspection and acceptance occur at the destination facility located at DDSP New Cumberland, 2083 Normandy Drive, New Cumberland, PA 17070-5002, with no variance allowed in quantity — exactly 162 units are required. Transportation must comply with DLA procedures and specify use of U.S.-flag vessels for sea shipments. The contract incorporates multiple FAR and DFARS clauses related to employment equity, trafficking prevention, eligibility verification, sustainable purchasing, hazardous material identification, subcontracting, NIST SP 800-171 cybersecurity assessments, whistleblower rights, and payment obligations, with deviations applied as specified. The contracting officer is responsible for completing the contract type and inserting pricing, though no unit price is currently listed, rendering the total value indeterminate. Proposals must be submitted electronically through the DIBBS portal by July 27, 2026, and offerors are required to provide their UEI and CAGE code, indicate size status, and disclose any covered defense telecommunications equipment or joint venture participation. No evaluation factors are explicitly detailed in the available documentation, and no attachments are formally listed. All deliverables must conform to technical specifications referenced in the DLA Master List of Technical and Quality Requirements, and electronic invoicing via WAWF is mandated upon award.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL COThe contract pertains to the procurement of five electrical cover units with part number 660-050XM25N and NSN 5935-01-688-5512, sourced from GLENAIR INC. under solicitation SPE7M5-26-T-354R. Delivery is required within 87 days of award, shipped FOB origin with zero tolerance for quantity variance, and must be delivered to the designated reception warehouse in Tracy, California. The item is classified as a critical application under FAA airworthiness requirements, demanding strict adherence to federal aviation regulations and the inclusion of FAA Airworthiness Approval documentation. All packaging and preservation must comply with MIL-STD-2073-1E, MIL-DTL-55330 for connectors, and MIL-STD-129 for marking, with no special marking codes applicable. Traceability documentation as defined in DLA Directive Procurement Note C03 must be retained by the contractor throughout the supply chain, and configuration control is governed by RQ002 requirements for any proposed engineering changes or deviations. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 TABLE 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with specific verification levels or AQLs. The contract incorporates technical and quality standards referenced through R or I numbers from the DLA Master List and includes additional requirements for preservation, packaging, and handling per RP001 and RP003. Transportation logistics are governed by DLAD Procurement Notes C19 and C20. The item is subject to Covered Defense Information protocols under RD002, and all data requirements are detailed in the associated Technical Data Package and CDRL FAACERTCOM-25015 Revision D dated January 14, 2025. The unit price is $5.00 per unit, totaling $25.00, and the offer response deadline is August 7, 2026, with the original delivery target set for June 13, 2026, and the required ship date by November 3, 2026.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL CThe contract pertains to the procurement of 12 units of a backsheel electrical connector adapter and cable clamp, identified by NSN 5935012395247 and part number G2804N22-28B, to be delivered FOB origin to the designated receiving warehouse in Tracy, California, with a required delivery window of 111 days after the delivery order. The item must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 for packaging unless overridden. Packaging must follow RP001 for palletization and MIL-STD-129 for labeling and marking, with bare item marking required per RQ017 for traceability. The use of ozone-depleting substances is strictly prohibited unless prior written approval is obtained from the Contracting Officer, and mercury or mercury-containing compounds are banned unless specifically exempted for functional components such as batteries, instruments, or sensors, with additional requirements for shock-proof design and secondary containment where applicable. Sampling inspection must adhere to MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. All deliveries are subject to government inspection and acceptance at the destination point, with strict compliance mandated for hazardous material handling in accordance with FED-STD-313 and TQ requirement IP025. Electronic invoicing is required via Wide Area WorkFlow, and the contractor must adhere to cybersecurity protocols including NIST SP 800-171 safeguards, cyber incident reporting, and prohibition of equipment from certain Chinese military entities. Additional compliance obligations include affirmative representations regarding small business status, UEI and CAGE codes, whistleblower rights, trafficking in persons, employment eligibility verification, and environmental standards for sustainable products. Payment is contingent upon timely submission of electronically filed receiving reports and invoices, with the contractor subject to accelerated payment terms for small business subcontractors. The contract prohibits the use of hexavalent chromium, mandates adherence to the DoD’s prohibition on acquiring covered defense telecommunications equipment from restricted foreign vendors, and requires compliance with all applicable transport regulations including the use of U.S.-flag vessels for ocean shipments unless waived. The contract also incorporates clauses related to contract changes, default remedies, unauthorized obligations, and
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
INSERT, ELECTRICAL CONNThe contract pertains to the procurement of electrical connector inserts identified by NSN 5935-01-104-6333, with a total quantity of 550 units divided into two line items of 50 and 500 units respectively. All items are to be supplied under a Firm Fixed Price agreement with no variance allowed in quantity, and delivery is required within 200 days after award. Inspection and acceptance occur at the origin point, and FOB terms are also set at origin. Packaging and preservation must strictly comply with MIL-STD-2073-1E and MIL-DTL-55330 for connectors, with marking following MIL-STD-129 and no special markings required. The use of any Class I ozone-depleting substances in manufacturing or processing is prohibited without prior written approval from the Contracting Officer, though this restriction does not extend to commercial items as defined by FAR 11.001 or purely part-numbered items. Technical data provided is for reference only and is not complete. The items are destined for the Egyptian Ministry of Defense, Armor Department, Store No. 67 in El Naser City, Cairo, with DF Young identified as the freight forwarder. Government use codes and project identifiers are included for internal tracking. The solicitation number is SPE7M5-26-Q-0773, issued under the Defense Logistics Agency, and all referenced technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, BULKHEAD, ELEThe contract pertains to the procurement of 10 units of a CONNECTOR, BULKHEAD, ELE with NSN 5935-01-738-5182, under solicitation SPE7M0-26-Q-1111, with a response deadline of August 3, 2026, and a required delivery within 30 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked in accordance with bare item marking protocols. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, submitted the DLA export-controlled data questionnaire, and received explicit approval from the DLA controlling authority. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with Kathleen Hipes as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334417
New
DIBBS
LIGHT ASSEMBLY, INDIThe contract solicitation SPE4A6-26-T-07LL issued by the Defense Logistics Agency under the Department of Defense seeks four units of the Light Assembly, IND, identified by NSN 6210-01-370-7840, with a required delivery date of December 19, 2026, under a 144-day performance period following order placement. The delivery is FOB Origin, with final acceptance occurring at the destination facility located at W62G2T, DLA Dist San Joaquin, Tracy, CA, and the Government assumes responsibility for inspection and acceptance at that point. The contractor must comply with stringent packaging and marking standards including MIL-STD-2073-1E for packaging methods and MIL-STD-129 for labeling, with mandatory use of the “01 - 01 Fragile” indicator and full adherence to DLA’s RP001 palletization requirements. The use of mercury or mercury compounds in any packaging, preservation, or marking materials is strictly prohibited, and all hazardous materials must be identified and labeled per 29 CFR 1910.1200 and MIL-STD-129, with any exempt materials subject to prior disclosure and approval. The contract incorporates a comprehensive suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses governing compliance across cybersecurity, labor, environmental, and procurement integrity domains. This includes mandatory adherence to the Safeguarding Covered Defense Information and Cyber Incident Reporting clause (252.204-7012), NIST SP 800-171 assessment requirements, and prohibitions against procurement of covered defense telecommunications equipment from Chinese military companies. Contractors must represent their small business status and any socioeconomic certifications including HUBZone, WOSB, EDWOSB, or SDVOSB, and for any joint ventures, disclose the names and Unique Entity Identifiers of all parties. Compliance with employment eligibility verification, combating trafficking in persons, equal opportunity for workers with disabilities, and electronic payment submission via Wide Area WorkFlow (WAWF) is required. Invoicing must be submitted electronically using the Invoice 2in1 or separate invoice/receiving report format. The contract includes clauses for contract changes, inspection at destination, default remedies, subcontractor management, accelerated payments to small business subcontractors, and prohibition of unauthorized obligations. No pricing information is provided
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of a connector receptacle identified by NSN 5935-01-142-7803 and part number MS90555C28413S, with a quantity of 12 units to be delivered within 64 days under solicitation SPE7M5-26-T-355C. The item is designated as a qualified product subject to the Qualified Products List requirements for Federal Stock Class 5935, and must comply with the technical and quality standards outlined in MIL-DTL-22992H and MS90555G, both revision G dated October 4, 2024. The use of ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited unless explicit written approval from the contracting officer is secured, and this restriction applies regardless of conflicting specifications. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes assigned verification levels or AQLs as specified, and acceptance requires zero non-conformances unless otherwise stated in the contract. The connector must be packaged in accordance with DLA’s packaging requirements, adhering to MIL-STD-129 for labeling and marking, and the Unit of Issue and Quantity per Unit Pack are strictly defined. Packaging must comply with ASTM D3951 for non-hazardous materials or Fed-Std-313, TQ requirement IP025, if hazardous, with DLA’s Master List of Technical and Quality Requirements taking precedence over any commercial standards. Palletization must conform to RP001, and all units are to be delivered FOB origin to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The delivery deadline is January 13, 2026, with an original required delivery date of December 13, 2025, and inspection and acceptance occur at destination. The contract is issued by the Department of Defense’s Active Devices Division, with point of contact Tate Shannon, and falls under NAICS code 334417 for electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL COThe contract pertains to the procurement of 31 units of a COVER, ELECTRICAL CO with NSN 5935-01-653-5097, under solicitation SPE7M5-26-Q-0771, issued by the Department of Defense’s Active Devices Division. The delivery is required within 73 days after award, and responses must be submitted by August 11, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA webpage, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. The contract mandates compliance with DLA packaging requirements and specific identification standards including the removal of government identification from non-accepted supplies and physical marking of bare items. The offeror must provide a complete data package covering both the approved and alternate parts, as no data is currently available. The place of performance is specified as New Cumberland, PA, 17070-5002, with Barbara Hoffmann as the primary point of contact for inquiries.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
WIRING HARNESSThe contract is for a wiring harness identified by NSN 6150-01-119-4113 with a quantity of 50 units, subject to a delivery deadline of 874 days after order. The solicitation, numbered SPE4A6-26-R-XB78, was posted on July 28, 2026, with responses due by August 7, 2026, and is a Total Small Business Set-Aside under FAR 19.5. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item includes export-controlled technical data regulated under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire approval. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The contracting activity is the ASC Commodities Division under the Department of Defense, with primary point of contact Joshua Tuggle.
Current-Carrying Wiring Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRANThe contract specifies the procurement of 100 units of a branched wiring harness identified by NSN 6150-01-674-3406, with a delivery requirement of 176 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. The item is subject to stringent cybersecurity and data protection protocols, including compliance with CMMC Level 2 as certified by a C3PAO, and the handling of covered defense information as defined under RD002. Physical identification and bare item marking must adhere to specified standards. Packaging must conform to DLA packaging requirements, and documentation for source approval requests is mandatory. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location; only DLA-approved contractors with JCP certification, completed training, and approved access may handle such data. Removal of government identification from non-accepted supplies is prohibited, and data distribution is tightly controlled under DFARS 252.225-7048. The solicitation number is SPE4A6-26-R-XB80, posted on July 28, 2026, with responses due by August 7, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, coordinated by Joshua Tuggle.
Current-Carrying Wiring Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract specifies the procurement of five flat washers with NSN/Part Number 5310-01-733-7584 under solicitation SPE4A6-26-Q-1214, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Mercury or mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except in specific exempted applications such as batteries, fluorescent lights, sensors, and certain instruments as defined by NAVSEA, with additional containment and shock-proofing requirements for portable devices. Technical data associated with this item is subject to export controls under ITAR or EAR, and dissemination to foreign persons—regardless of location—is restricted without prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete required DOD export control training, and receive explicit approval from the DLA to access controlled data. The contract opens for response on July 28, 2026, with a deadline of August 3, 2026, and primary contact is Vincent Price at the provided email and phone number.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
ADAPTER, RADIO FREQUThe contract under solicitation number SPE4A6-26-R-XB88 is for the procurement of an adapter, radio frequency, with NSN/Part Number 5940-01-507-4298, to be delivered within 223 days after contract award. Issued by the ASC Commodities Division of the Department of Defense, the solicitation was posted on July 28, 2026, with responses due by August 14, 2026, and the primary point of contact is Mildred Vargas-Astacio. The contract is subject to strict compliance with procurement regulations, including mandatory representations regarding transportation by sea. If the Contractor initially represented that no sea transport would occur but later discovers sea transport is necessary, they must immediately notify the Contracting Officer. Failure to do so, or unauthorized use of foreign-flag vessels during performance, may result in equitable adjustments to the contract value. Additionally, if the contract exceeds the simplified acquisition threshold, the final invoice must include all required representations; otherwise, it will be rejected as improper under the Prompt Payment clause and returned to the Contractor.
Other Communications Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 17 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking & Logistics SupportThe contract requires full compliance with military standards for packaging, marking, and bar-coding as defined by MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly prepared for military logistics and supply chain handling. Delivery is specified as FOB Origin, meaning the contractor assumes responsibility for packaging and readiness at the point of shipment, with no obligation for transportation costs or risk beyond that point. Invoicing must be processed through the Wide Area Workflow system to meet Department of Defense financial and documentation protocols. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the Small Business Administration. The NAICS code 493190 indicates the work falls under Other Truck Transportation, suggesting the focus is on logistics and transportation support services tied to military packaging requirements. The contracting office is the ASC Commodities Division under the Department of Defense, with proposals due by August 7, 2026, following a July 27, 2026 posting date. Compliance with all federal and military standards is mandatory for award consideration.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
CMMC Assessment & Cybersecurity ComplianceThis contract entails a CMMC Level 2 assessment and comprehensive cybersecurity system hardening to ensure full compliance with NIST SP 800-171 requirements. The scope includes a detailed audit of existing security controls, identification of gaps, and implementation of remediation measures to meet the necessary cyber hygiene standards. The contractor is responsible for achieving certification through a C3PAO accredited organization, ensuring that all assessed systems are properly documented, secure, and aligned with Department of Defense cybersecurity mandates. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. It is categorized under NAICS code 541512 for Computer Systems Design Services and is issued by the ASC Commodities Division within the Department of Defense. Proposals are due by August 7, 2026, with the solicitation published on July 27, 2026. The work may be performed remotely or at the contractor’s facility, with no specific physical location designated for performance, and the award will be managed under federal subcontracting guidelines applicable to defense-related cybersecurity services.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Technical Data & Export Control Compliance ServicesThe contract pertains to the management of ITAR and EAR-controlled technical data with a focus on ensuring full compliance with U.S. export control regulations. It requires comprehensive services including strict access control protocols, specialized training programs, and ongoing monitoring to enforce restrictions on foreign nationals, ensuring that sensitive technical information is handled in accordance with federal law. The scope emphasizes operational procedures that safeguard controlled data across all stages of handling, from receipt and storage to dissemination and disposal, with particular attention to personnel vetting and security awareness. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541611 for administrative management and general management consulting services. The work is contracted through the ASC Commodities Division of the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 27, 2026. Performance location details are unspecified, indicating flexibility or that the work may be conducted remotely or at multiple sites. The solicitation number is SPE4A626RXB74, and the contract is managed through the DIBBS platform, requiring interested parties to review and submit proposals through the official online portal.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.
Engineering Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Shipment CoordinationThe contract focuses on the coordination of FOB-origin shipments for shear bolts, requiring full compliance with the Web-Based Supply Chain System for invoicing, ensuring all documentation meets WAWF standards. Shipment handling must be executed under DPAS-rated priority to guarantee timely delivery in support of defense logistics, with routing strictly aligned to DoDAAC and CAGE codes to ensure accurate and secure delivery to designated military recipients. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 488510, which pertains to other support activities for air transportation and logistics coordination. The posting date is July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the ASC Commodities Division within the Department of Defense, indicating this effort supports critical defense supply chain operations.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.
Engineering Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract calls for the military-compliant packaging, preservation, and marking of shear bolts in full accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items meet Department of Defense standards for handling, storage, and logistics. This includes the application of barcodes and labeling as required by the specifications, with strict adherence to durability, clarity, and traceability protocols for military supply chain operations. All work must be performed under a Total Small Business Set-Aside, classified under NAICS code 561910, meaning only small businesses are eligible to bid, promoting small business participation in defense logistics. The solicitation is issued by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026, and was posted on July 27, 2026. The contract is structured as a subcontract, indicating the winning vendor will likely provide services to a prime contractor fulfilling broader defense requirements. While the place of performance and point of contact details are not specified, full compliance with military packaging and marking standards remains the central obligation, with no deviations permitted. Bidders must possess the capability to meet exacting defense logistics requirements and ensure seamless integration of shear bolts into defense inventory and distribution systems.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details