Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!
logo

CABLE ASSEMBLY, SPEC

Active
SPE4A7-26-T-079UFederal
AI Contract Overview
Show more

This contract is for the procurement of 70 units of a special purpose electrical cable assembly, identified by NSN/Part Number 6150-01-582-7233. The solicitation, issued by the Department of Defense through the DLA’s ASC Supplier Operations AE and AF Division, specifies a delivery timeline of 150 days after the award date. The place of performance is in Tracy, California, and the contract includes adherence to rigorous technical and quality requirements listed in the DLA Master List, with the applicable revision tied to the solicitation or award dates. The contract mandates compliance with detailed packaging, physical marking, and removal of government identification protocols, as well as strict sampling plans based on military standards such as MIL-STD-1916 and ASQ H1331 to ensure product quality and conformance. The contract also emphasizes export control of technical data under ITAR and EAR regulations, restricting data access to contractors with approved certifications through the US/Canada Joint Certification Program and required DLA training on export-controlled technical data handling. The export restrictions apply to all employees and subsidiaries regardless of location, ensuring sensitive information is protected according to federal guidelines. The solicitation was posted in March 2026 with a response deadline in late March, and the primary point of contact is Denise Prince from the DLA, who can be reached via provided email and phone contacts. This contract is classified under NAICS code 334419, covering other communications equipment manufacturing.

General Info

Procurement of 70 electrical cable assemblies, 150-day delivery, strict quality and export controls.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency

NAICS

334419 - Other Electronic Component Manufacturing

View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE
Documents(1)

SPE4A7-26-T-079U.pdf

PDF

AI Contract Breakdown
Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline
PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information
Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office Address

US

Contacts

1 contact available

View Contacts

Start a free trial to view contact information.

Start Free Trial
Full Description
Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE4A7-26-T-079U
SECTION B
export-controlled data. NSN/Part Number: 6150-01-582-7233 Quantity: 70 EA Purchase Request: 7015602047QTY: 70 Delivery: 150 days ADO

Similar Contracts

NAICS: 334419
New
Federal

SHAFT, STRAIGHT, AIRC

The contract calls for the procurement of 113 units of a straight shaft identified by NSN 6150-01-478-1686 under solicitation number SPE4A5-26-T-9810. The purchase is managed by the ASC Supplier OEM Division of the Department of Defense, with delivery required within 113 days to DLA Distribution San Diego at the specified address. Packaging and marking must comply with DLA packaging requirements as well as ASTM D3951 and MIL-STD-129 standards, with a focus on proper identification of critical application items and removal of government markings from non-accepted supplies. Inspection and acceptance of the items will occur at the destination. Sampling and quality assurance directives follow MIL-STD-1916 or ASQ H1331 standards, emphasizing strict adherence to assigned verification levels for critical, major, and minor attributes, with zero tolerance for non-conformances in the sampling lot unless otherwise noted. The contract specifies that Unit of Issue and Quantity per Unit Pack will be determined according to the contract terms, supported by references to DLA Master List technical requirements. The contract's ship date is set for July 12, 2026, with a final delivery deadline of August 1, 2027, and the contact for inquiries is Cynthia Duval.

ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

View Details
NAICS: 334419
New
Federal

CABLE ASSEMBLY, RADI

This contract covers the procurement of seven units of a radio frequency cable assembly identified by NSN/Part Number 5995-01-202-6275. The solicitation, issued by the Department of Defense through the Defense Logistics Agency (DLA), specifies a delivery schedule of 117 days after the award date, with critical technical and quality requirements governed by the DLA Master List and applicable regulations. The contract enforces strict adherence to packaging, inspection, acceptance at origin, and marking standards, ensuring quality control and compliance with government guidelines. Significant emphasis is placed on the handling of technical data, which is subject to export control regulations under ITAR and EAR. Access to this technical data is restricted to contractors with approved certifications, completed training, and authorization from DLA, highlighting the sensitive nature of the information involved. The place of performance is Robins Air Force Base in Georgia, and the solicitation encourages compliance with all federal acquisition policies. Erica Adams serves as the primary point of contact for this procurement.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days

View Details
NAICS: 334419
New
Federal

REMOVAL ASSEMBLY

This contract solicits the procurement of one removal assembly, identified by NSN 4920-01-661-7264, to be delivered within five days after date of order to Camp Pendleton. It is managed by the Aviation Supply Chain ESOC under the Department of Defense, with a solicitation number SPE4A0-26-T-2108 and a response deadline of March 20, 2026. The contract requires compliance with several technical and quality standards as outlined in the DLA Master List, including cybersecurity measures aligned with CMMC Level 2 certification and physical identification or marking requirements. The removal assembly must conform to specific defense packaging and handling protocols, including the removal of government identification from non-accepted supplies and export control restrictions governed by ITAR, EAR, and DFARS regulations. The handling of export-controlled technical data is tightly regulated; contractors must have an approved US/Canada Joint Certification Program certification and complete required training before accessing such data. Item Unique Identification is not required, per the customer's request. The solicitation emphasizes adherence to covered defense information protection, appropriate data distribution controls, and compliance with established cybersecurity and export controls. The designated point of contact for this procurement is Danita Davis, reachable via email or phone.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days

View Details
NAICS: 334419
New
Federal

TOOL, SPRING COMPRES

This contract is for the procurement of one unit of a spring compression tool, identified by the National Stock Number (NSN) 4920-01-545-6271 and part number 42675-4551T-1. The contract requires delivery within 20 days at the origin point, with inspection and acceptance occurring at the destination. Packaging must adhere strictly to DLA packaging requirements, ASTM D3951 standards, and MIL-STD-129 marking and labeling protocols. Palletization and packing details follow detailed regulatory guidance to ensure compliance with government specifications. Sampling and quality inspections must conform to MIL-STD-1916 or equivalent accepted standards, with any critical, major, and minor attributes verified at levels specified within the contract. Technical data for the item is either proprietary or insufficient, limiting competitive procurement. The contract includes provisions to remove government identification from non-accepted items and mandates physical identification marking on bare items. The purchase request number is 7015755998, and the contract number is SPE4A6-26-T-946H, issued by the Department of Defense's ASC Commodities Division. The first destination for shipment is MCAS Futenma in Okinawa, Japan, with detailed shipping instructions and contact information provided for distribution management. The solicitation response deadline is March 20, 2026, with the solicitation posted on March 12, 2026.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

View Details
NAICS: 334419
New
Federal

CABLE ASSEMBLY, PRIN

The contract is for the procurement of six cable assemblies identified by NSN/Part Number 5995-01-612-5161, with a delivery schedule set at 97 days after the date of order. The solicitation number is SPE4A6-26-T-944Y and the purchase is managed by the Department of Defense’s ASC Commodities Division, with performance located in San Diego, California. The response deadline for the solicitation is March 20, 2026. This contract falls under NAICS code 334419, indicating manufacturing related to electronic component assembly. Significant compliance requirements are highlighted due to the nature of the technical data involved, which is subject to export controls under the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). Handling this data requires strict adherence to legal restrictions, including authorization from the Department of State or Department of Commerce prior to export or disclosure to foreign nationals. Contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires to gain access to the export-controlled data, ensuring that sensitive information is properly safeguarded. The primary point of contact for inquiries related to this contract is Lakisha Atkinson, reachable via email and phone.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

View Details