Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-12VMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies a single unit of a cable assembly with NSN 6150016631413 and part number MK4654117-06, procured under solicitation SPE4A6-26-T-12VM for the USS NEW ORLEANS LPD 18. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and both inspection and acceptance occur at the delivery point. The item must be packaged per MIL-STD-2073-1E with packaging code U, marked in accordance with MIL-STD-129 using no special marking code, and palletized following DLA packaging requirements. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or an equivalent zero-based plan, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Any configuration changes require an Engineering Change Proposal or variance request. The shipment is destined for FPO AP 96673, and transportation protocols C19 and C20 apply. The contract is issued by the Department of Defense’s ASC Commodities Division, with Berkeley Vaughan as the primary point of contact, and the required delivery date is June 8, 2026.

General Info

One cable assembly, NSN 6150016631413, due June 8, 2026, FOB destination, per military packaging and quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

UNIT 100207 BOX 1, FPO, AP, 96673, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12VM.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Berkeley Vaughan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPECIAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
GENERAL DYNAMICS LAND SYSTEMS, INC 07BS6 P/N MK4654117-06
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-12VM
SECTION B
PR: 7017708506 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017708506 0001 EA 1.000
NSN/MATERIAL:6150016631413
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R23168
USS NEW ORLEANS LPD 18
UNIT 100207 BOX 1
FPO AP 96673
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R23168
USS NEW ORLEANS LPD 18
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R231686154CG24
RDD: 777
PROJ: 9AL TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: FC: N2
Need Ship Date:00/00/0000
SPE4A6-26-T-12VM
SECTION B
PR: 7017708506 PRLI: 0001 CONT’D
Original Required Delivery Date:06/08/2026
SPE4A6-26-T-12VM NSN/Part Number: 6150-01-663-1413 Quantity: 1 EA Purchase Request: 7017708506QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CONTROL, ELECTRONIC
Solicitation # SPE8E8-26-T-5032
This contract pertains to the procurement of electronic control units under solicitation SPE8E8-26-T-5032, with a total quantity of nine units identified by NSN 6350-01-623-1250 and part numbers CI-CYP-20006 and S100XB2(24VDC)XA6XBRUTE. The items must be furnished FOB origin with no quantity variance allowed, delivered within 167 days, and inspected at destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using unit container 10, dry preservation method, and no special marking. Packaging and shipping of hazardous materials, including mercury-containing components, are governed by strict prohibitions against intentional mercury addition except for approved functional applications such as specific instruments, sensors, controls, and naval-specified reagents, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All requirements referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of November 12, 2026. Transportation logistics follow DLAD Proc Notes C19 and C20, and the unit of issue is defined per DoD standards linked in the document. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact. Covered defense information provisions apply, and all materials must conform to ANSI X12 unit of issue standards. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 335311 for electronic control manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12SJ
The contract involves the procurement of a wiring harness with NSN/part number 6150-01-674-4547, quantity one unit, under solicitation SPE4A6-26-T-12SJ, with a response deadline of August 13, 2026, and delivery required 380 days after contract award. The item contains technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to DLA contractors holding valid US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approved status through the DLA questionnaire process. The contracting activity is the ASC Commodities Division under the Department of Defense, with performance designated for New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Marcita Robinson, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIR
Solicitation # SPE8E8-26-T-5052
The contract pertains to the procurement of 11 units of a FIR sensing element with NSN 6350-37-530-6236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. The unit price is $11.00 per unit, totaling $121.00, with delivery required FOB origin within 167 days from the contract award. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, including MIL-STD-129 for labeling and RP001 for palletization. If the item is hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging in accordance with ASTM D3951 is required, though DLA requirements take precedence. The item must be marked and labeled per specified standards, and the unit of issue is each (EA) with zero variance allowed in quantity. The required ship date is February 1, 2027, with an original delivery deadline of February 23, 2027. Transportation and shipping instructions reference DLAD procurement notes C19 and C20. The solicitation number is SPE8E8-26-T-5052, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 335311 for the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
ALARM, BACK-UP, VEHIC
Solicitation # SPE8E8-26-T-5061
The contract pertains to the procurement of four units of an alarm, backup, vehicle system identified by NSN 6350-01-714-4239 and part number EP-0002558, with a unit price of $4.00 and a total price of $16.00. Delivery is required within 167 days from the contract date, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The quantity permitted is strictly fixed at four units with zero variance allowed. Packaging must comply with DLA’s master list of technical and quality requirements, which supersede ASTM D3951, and hazardous materials must adhere to FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow commercially acceptable packaging standards. All packaging and labeling must conform to MIL-STD-129, and palletization must meet RP001 DLA packaging requirements. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the required ship date set for February 1, 2027, and the original delivery deadline on February 26, 2027. The contract falls under solicitation SPE8E8-26-T-5061 issued by the Department of Defense through the DLA, with technical and quality specifications governed by the DLA Master List referenced through their official portal, and all documentation must align with the revision in effect on the solicitation issuance date.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
SIREN, ELECTRIC MOTO
Solicitation # SPE8E8-26-T-5035
The contract is for the procurement of eight electric sirens identified by NSN 6350-01-653-8128 under solicitation SPE8E8-26-T-5035, issued by the Department of Defense through the DLA New Cumberland Facility. The item is classified under NAICS code 335311 and requires delivery within 167 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size, and any amendments superseding prior versions. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Alexis Selby at alexis.selby@dla.mil or 312-444-8487. Performance is to be delivered to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and full details are accessible via the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330X
The contract pertains to the procurement of one unit of a wiring harness designated as P/N 458-59661-1 with NSN 6150-01-677-6345, issued under solicitation SPE4A5-26-T-330X by the Department of Defense through DLA. Delivery is required within 170 days to Tinker AFB, Oklahoma, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination per established military standards. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization follows DLA’s specific packaging guidelines. The item is classified as a critical application and is subject to tailored quality requirements, including technical and quality specifications referenced from the DLA Master List. Zero-defect sampling is mandated under MIL-STD-1916 or equivalent zero-based plans unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted items. Unit of issue is each (EA), and the contract enforces strict adherence to DLA packaging, marking, and test equipment standards. The required delivery date was originally set for June 9, 2028, with a needed ship date of January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12SK
This contract pertains to the procurement of a cable assembly under solicitation SPE4A6-26-T-12SK, with a required quantity of 49 units and a delivery timeframe of 441 days after order. The item is governed by stringent technical and quality requirements including CMMC Level 2 certification for third-party assessment organizations, compliance with DFARS 252.225-7048 for export-controlled technical data, and adherence to ISO 9001:2015 quality standards for both manufacturers and non-manufacturers. All technical and quality provisions referenced are sourced from the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. The cable assembly is subject to physical identification and bare item marking requirements, and all non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at specified levels or AQLs. Measuring and test equipment must meet defined standards. Export-controlled technical data associated with the item is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DLA export control training, and formal authorization. The item's NSN is 0001S00000053, and performance is directed to Texarkana, TX. The contract mandates compliance with DLA packaging standards and inspection at origin, and contractors new to this item or those altering chemistry or manufacturing processes are subject to additional fat testing requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330V
This contract pertains to the procurement of a wiring harness, specifically identified by part number 901-076-711-109 and NSN 6150-01-662-4945, for delivery in the quantity of nine units. The item is classified as a critical application item supplied by Bell Textron Inc and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 sampling standards with zero non-conformances required unless otherwise stipulated, and specifies verification levels and AQLs for critical, major, and minor attributes. Cybersecurity compliance is required at CMMC Level 2, and all items must be physically marked in accordance with RQ017, with packaging and marking conforming to MIL-STD-2073-1E and MIL-STD-129. The delivery is FOB origin with inspection and acceptance occurring at destination, and the full quantity must be delivered within 170 days from the contract award, with a required delivery date of April 26, 2029. Packaging and palletization follow DLA-specific requirements, and special marking is not required. The shipment destination is the DLA Distribution facility in New Cumberland, PA, and transportation guidelines are governed by DLAD procedural notes. The solicitation was issued under contract number SPE4A5-26-T-330V with a response deadline in August 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SOCKET BASE, FIRE DE
Solicitation # SPE8E8-26-T-5079
The contract pertains to the procurement of eight socket base, fire de units identified by NSN 6350-33-210-9888 and part number SPB-ADAPT-NA from CONSILIUM MARINE & SAFETY AB. The solicitation number is SPE8E8-26-T-5079, with a response deadline of August 17, 2026, and a required delivery date of April 16, 2027, allowing 167 days for fulfillment. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The units must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which override any applicable ASTM D3951 standards, and must adhere to MIL-STD-129 for labeling. If deemed hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, subject to DLA standards. Palletization must comply with RP001, and all packaging must be marked with the specified Unit of Issue and Quantity per Unit Pack. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a ship date of February 1, 2027. The contract references additional technical and documentation guidelines including SAR requirements and proper removal of government identification from non-accepted items. The unit price is $8.00 per ea, totaling $64.00.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A5-26-T-330W
The contract pertains to the procurement of a wiring harness designated by part number 901-175-506-109 and NSN 6150-01-460-6236, with a quantity of five units to be delivered within 170 days from the contract date. The item is classified as a critical application component under The Boeing Company and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances required unless otherwise stipulated. Quality Assurance is governed by ISO 9001:2015, and configuration changes require formal engineering change proposals or variance requests. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all documentation must meet Source Approval Request (SAR) and packaging criteria outlined in DLA guidelines. The wiring harness must be packaged in compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code applied. Palletization conforms to DLA Packaging Requirements, and delivery is FOB origin to the specified destination at Tracy, California, with both inspection and acceptance occurring at the delivery point. The unit of issue is each, priced at $5.00 per unit for a total of $25.00, with no variance permitted in quantity. Item Unique Identification is waived per Service customer request, and all materials must be free of Government identification if rejected. Transportation directives and freight details are governed by DLAD Proc Notes C19 and C20. The contract solicitation was issued on August 5, 2026, with responses due by August 13, 2026, under NAICS code 335311, managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Takiya Dickson as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
Federal
CABLE, MOTOR POWER
Solicitation # N0010426QNE05
This contract pertains to the manufacture of the CABLE, MOTOR POWER under solicitation N0010426QNE05, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is subject to Emergency Acquisition Flexibilities and will be awarded bilaterally, requiring the contractor’s written acceptance before execution. All contractual documents are considered issued upon electronic transmission, including email. The specification mandates compliance with drawing 8630046-2 and incorporates key military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality systems. The item must be mercury-free, with any use of metallic mercury requiring prior written approval and strict containment protocols to prevent contamination, particularly due to its corrosive and toxic risks in submarine and surface ship environments. Vendors must be certified under NAVSEA S9320-AM-PRO-020/MLDG, and each delivered assembly must include a certified Test Inspection Report. The contract imposes rigorous quality assurance obligations, requiring the contractor to maintain a government-acceptable quality system and assume full responsibility for inspection and compliance, regardless of whether government inspections are conducted. Inspection records must be retained for four years after final delivery. Packaging must follow MIL-STD-2073, and all subcontractors must adhere to the same requirements. The solicitation is set aside for small businesses and includes mandatory representations and certifications regarding veterans’ employment, workers with disabilities, Buy American provisions, and cybersecurity maturity levels. Payment will be processed via Wide Area Workflow with receiving report and invoice combo. The contractor must submit all configuration changes, deviations, or waivers through formal channels to the Contracting Officer, and unauthorized modifications are at the contractor’s sole risk. Offers are evaluated with consideration of past performance, and access to restricted documents requires authorization through designated government contacts. The response deadline is September 4, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details