This Solicitation opportunity from Department Of Defense was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CABLE ASSEMBLY, SPEC

Closed

SPE4A6-26-T-23YPFederal

Submission Closed09/04/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # 70ZU0127QRO028

POSTED

DEADLINE

Solicitation # SPRPA127RXA44

Solicitation SPRPA127RXA44, issued by DLA Aviation at Philadelphia, is a negotiated request for proposal for the acquisition of newly manufactured power supply spares. These items are designated as Critical Application Items (CAI), and the government strictly prohibits the use of refurbished, remanufactured, or repaired materials. The contract requires the contractor to maintain a quality management system compliant with AS/EN/JISQ 9100 or an equivalent standard. Inspection and acceptance will occur at the point of origin, with packaging and marking governed by MIL-STD-2073 and MIL-STD-129. The government intends to make a single award based on the most advantageous offer, prioritizing past performance as the primary evaluation factor over price. Past performance will be assessed using the DoD Supplier Performance Risk System (SPRS) color ratings. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Key compliance requirements include adherence to the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity standards, and specific electrostatic discharge protection per ANSI/ESD S20.20-2021 for sensitive items.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA127QWA36

Solicitation SPRPA127QWA36, issued by the Department of Defense via the Pa DLA Aviation At Philadelphia, seeks the acquisition of one frequency converter (NSN 6130-01-682-8677). This procurement is being conducted under EAF Emergency Acquisition Flexibilities, and a single award will be made to the offeror determined to be most advantageous based on price and past performance, with past performance weighted more heavily than price. To be deemed technically acceptable, offerors must be government-approved sources of supply; any distributors must provide an authorized distributor letter on the source's letterhead upon proposal submission to Joseph Gambino. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for CONUS and OCONUS shipments. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Key compliance requirements include NIST SP 800-171 cybersecurity standards, Buy American and Balance of Payments program certifications, and the provision of Material Safety Data Sheets for any hazardous materials. Inspection and acceptance will occur at the point of origin.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Manufacturing and Supply of Special Purpose Electrical Cable AssemblyThis subcontract involves the manufacture and supply of special purpose electrical cable assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating assemblies that strictly adhere to Oshkosh Aerotech P/N 3730692 and NSN 5995-01-696-1261 specifications. The scope of work includes rigorous quality assurance performed according to MIL-STD-1916 or ASQ H1331 standards, with packaging requirements meeting MIL-STD-129 and MIL-STD-2073-1E. The final deliverable is a completed and inspected cable assembly. This opportunity falls under NAICS code 335931 and is associated with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Quick Disconnect Terminals (NSN 5940-01-616-1661)This subcontract involves the manufacture or sourcing of Quick Disconnect Terminals identified by NSN 5940-01-616-1661 for prime contractors supporting the Defense Logistics Agency Weapons Support Aviation Supply Chain. The selected provider must possess a registered CAGE code and the capability to supply the items based solely on the National Stock Number without a technical data package. Deliveries must adhere to the specified unit of issue and quantity per unit pack, with physical shipment to the designated government location in Fort Bliss, Texas. The opportunity is categorized under NAICS code 335931 and was posted on November 12, 2026, with a response deadline of November 20, 2026. This requirement is managed by the Department of Defense to ensure the steady supply of critical terminals for aviation supply chain operations.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Power Cable Assemblies (NSN 5995-01-737-8702)This subcontract involves the manufacture and supply of three electrical power cable assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the assemblies according to NSN 5995-01-737-8702 and the DLA Master List of Technical and Quality Requirements. All deliverables must undergo inspection per MIL-STD-1916 or ASQ H1331 and be packaged in accordance with MIL-STD-2073-1E. Strict adherence to the Buy American Act and the Berry Amendment is required for all materials used in production. The project falls under NAICS code 335931 and requires the delivery of completed, tested, and packaged units to a designated performance location in FPO 96667.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Lightning Arresters (NSN 5920-01-655-3485)This subcontract involves the procurement of seven specialized Type I Code M lightning arresters, identified by NSN 5920-01-655-3485, to support prime contractors for the DLA Weapons Support Active Devices Division. The selected provider is responsible for sourcing or manufacturing the units and ensuring strict adherence to the Buy American Act. Deliveries are designated for FLTREADCEN Northwest and ASD Jacksonville, with the place of performance located in Oak Harbor. The contractor must implement rigorous quality control measures to guarantee a minimum shelf life of 24 months. Additionally, all units must be packaged, marked, and palletized in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. This requirement falls under NAICS code 335931 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the fabrication of four special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for performing assembly according to NSN 6150-01-558-1023 and TDP specifications, ensuring that all items are completed, tested, and delivered. Quality control must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, while packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The project requires strict adherence to the Buy American Act and DFARS 252.204-7012 regulations. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 335931. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE4A6-27-T-6099

Solicitation SPE4A6-27-T-6099 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three electrical power cable assemblies, identified by NSN 5995-01-658-1279 and Glenair part number ABC60567. The requirement is categorized under NAICS 335931 and is not a small business set-aside. Key delivery milestones include a need ship date of April 20, 2027, and an original required delivery date of May 7, 2027, with shipping terms set as FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Notable restrictions include a total prohibition of mercury or mercury compounds in the hardware and packaging, and a ban on the use of additive manufacturing unless specifically authorized. Compliance requirements include CMMC Level 2 Self-Assessment, the Berry Amendment, and the Buy American Act. All quotes must be submitted electronically via the DIBBS system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-27-T-8268

Solicitation SPE4A6-27-T-8268 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for four special purpose electrical cable assemblies, identified by NSN 5995-01-729-1083. The procurement requires delivery to the Distribution Management Office at Camp Kinser, Japan, with an original required delivery date of September 25, 2026. Quotations must be submitted via the DIBBS system by November 12, 2026. The government may utilize an automated award process and provides a price evaluation preference for HUBZone Small Business Concerns, though offers utilizing additive manufacturing are ineligible for award. The contract mandates strict adherence to quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, specifically including Special Marking Code 32 for shelf life. Due to the nature of the technical data, this acquisition is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contractor must comply with DFARS cybersecurity requirements for safeguarding covered defense information and adhere to the Buy American Act and Berry Amendment domestic material restrictions. Invoicing and payment are processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-27-T-2817

This procurement is for the acquisition of lightning arresters (NSN 5920-01-655-3485) for the DLA Weapons Support Active Devices Division. The requirement consists of two line items totaling seven units, with five units destined for FLTREADCEN Northwest at Naval Air Station Whidbey Island and two units for ASD Jacksonville. The contract is issued under the First Destination Transportation program with FOB Origin terms and a required delivery window of 20 days, with an original required delivery date of November 16, 2026. Inspection and acceptance will occur at the destination. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months; deliveries must have at least 85% (21 months) of this shelf life remaining. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA requirement RP001. The contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except for specific functional exceptions. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-27-T-8630

Solicitation SPE4A6-27-T-8630, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 115 electrical special purpose cable assemblies, identified by NSN 5995-01-677-2325 and Rockwell Collins P/N 987-0021-162. The required delivery date is July 4, 2027, with shipping terms set as FOB Origin. Delivery is designated for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This is not a small business set-aside, and quotes must be submitted via the DIBBS system. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 Self-Assessment and requirements for safeguarding covered defense information. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Invoicing and payment processing must be managed through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days

AI Contract Overview

Solicitation SPE4A6-26-T-23YP is a request for quotations issued by the Defense Logistics Agency Aviation ASC Commodities Division for the procurement of two special purpose electrical cable assemblies, identified by NSN 5995017077987. The requirement is split into two line items, each for a quantity of one unit. Delivery is required within 20 days after receipt of order, with original required delivery dates set for May 8, 2026, and May 21, 2026. The terms are FOB Origin, and both inspection and acceptance will occur at the destination. Shipments are directed to Explosive Ordnance Disposal groups in Virginia Beach, Virginia, and San Diego, California, using the fastest traceable means. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory requirements include CMMC Level 2 Self-Assessment, DFARS 252.204-7012 for safeguarding covered defense information, and compliance with the Buy American and Balance of Payments Program. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

General Info

Procurement of two electrical cable assemblies for EOD groups in Virginia and California.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

2520 MIDWAY ROAD SUITE 100, VIRGINIA BEACH, VA, 23459, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedAug 27

Solicitation

Notice updatedAug 27

The notice description changed.

Response DeadlineSep 4

Deadline has passed

Submission Closed

09/04/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

TRACI BEAUDOIN

Full Description

CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPECIAL, PURPOSE, ELECTRICA:
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
HII UNMANNED SYSTEMS, INC 4Z5A9 P/N 153314-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-23YP
SECTION B
PR: 7016918691 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016918691 0001 EA 1.000
NSN/MATERIAL:5995017077987
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N55322
EXPLOSIVE ORDNANCE DISPOSAL GROUP 2
2520 MIDWAY ROAD SUITE 100
VIRGINIA BEACH VA 23459
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N55322
EXPLOSIVE ORDNANCE DISPOSAL ESU 2
1627 MIDWAY ROAD
VIRGINIA BEACH VA 23459-3323
US
M/F: (TCN) N5532252181035
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:05/21/2026
SPE4A6-26-T-23YP
SECTION B
PR: 7016735621 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016735621 0001 EA 1.000
NSN/MATERIAL:5995017077987
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:E5 OPI:M INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N55321
EXPLOSIVE ORDNANCE DISPOSAL GROUP 1
3500 ATTU RD
BLDG 104
SAN DIEGO CA 92155-5584
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE4A6-26-T-23YP
SECTION B
PR: 7016735621 PRLI: 0001 CONT’D
N55321
EXPLOSIVE ORDNANCE DISPOSAL GROUP 1
3500 ATTU RD
BLDG 104
SAN DIEGO CA 92155
US
M/F: (TCN) N5532151000886
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:05/08/2026
SPE4A6-26-T-23YP NSN/Part Number: 5995-01-707-7987 Quantity: 1 EA Purchase Request: 7016918691QTY: 1 Delivery: 20 days ADO