Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CABLE ASSEMBLY, SPEC

Active
SPE4A6-27-T-7716Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-7716 is a federal procurement issued by the Defense Logistics Agency for seven special purpose electrical cable assemblies, identified by NSN 6150013923668. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania by April 23, 2027, with a delivery lead time of 164 days after order. The terms are FOB Origin, and inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. A critical prohibition is placed on the use of mercury or mercury compounds in preservation, packaging, and marking. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ Z1.4, with an acceptance standard of zero non-conformances. Compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 334419 and requires offerors to maintain active registration in the System for Award Management.

General Info

DLA solicitation for seven special purpose electrical cable assemblies delivered by April 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

334419 - Other Electronic Component Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
MORPAC INDUSTRIES, INC 66822 P/N 70048-1
SPE4A6-27-T-7716
SECTION B
PR: 7018862042 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018862042 0001 EA 7.000
NSN/MATERIAL:6150013923668
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-27-T-7716
SECTION B
PR: 7018862042 PRLI: 0001 CONT’D
Need Ship Date:04/23/2027 Original Required Delivery Date:04/23/2027
SPE4A6-27-T-7716 NSN/Part Number: 6150-01-392-3668 Quantity: 7 EA Purchase Request: 7018862042QTY: 7 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
Manufacture and Supply of Electronic Filter Assemblies (NSN 5915-01-686-4765)This subcontract involves the manufacture and supply of 23 electronic filter assemblies, identified by NSN 5915-01-686-4765, for prime contractors supporting DLA supply contracts for the USS George H W Bush CVN 77. The Department of Defense requires all assemblies to be fabricated in strict accordance with the DLA Master List of Technical and Quality Requirements. Compliance with the Berry Amendment for domestic sourcing is mandatory, and the selected provider must maintain an active SAM registration. Notably, the use of additive manufacturing is strictly prohibited for this project. The contract falls under NAICS code 334419 and is managed through the Maritime Supply Chain ESOC Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
Supply of Fixed Glass Dielectric CapacitorsThis subcontract involves the supply of 100 fixed glass dielectric capacitors, specifically Kyocera AVX part number 100B200JP500X, for the DLA Weapons Support Active Devices Division. The components must feature lead finish marking according to IPC/JEDEC J-STD-609 and adhere to strict preservation and packaging standards defined by MIL-DTL-28786, MIL-STD-2073-1E, and MIL-STD-129. The delivery is designated as FOB origin to DLA Distribution in Warner Robins, Georgia. This procurement falls under NAICS code 334419 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
Supply of Variable Wire Resistors (NSN 5905-01-633-1066)This subcontract involves the manufacture or procurement of variable wire resistors under NSN 5905-01-633-1066 for prime contractors supporting the Defense Logistics Agency Weapons Support Active Devices Division. The contractor is responsible for ensuring all components meet strict military specifications, including marking according to MIL-STD-129, packaging per MIL-STD-2073-1E, and palletization following RP001. Additionally, the lead finish attributes must be identified using special marking code ZZ in compliance with IPC/JEDEC J-STD-609. The final physical components are to be delivered to the DLA Distribution Depot Hill located at Hill Air Force Base, Utah. This requirement falls under NAICS code 334419, with a response deadline set for November 10, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M5-27-T-1166
Solicitation SPE7M5-27-T-1166 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 126 electrical grounding strips, identified by NSN 5999-01-689-9857. The required delivery date is April 22, 2027, with the place of performance and delivery located in Tracy, California. Quotations must be submitted via the DIBBS system by October 30, 2026. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the procurement is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates various DFARS and FAR clauses regarding cybersecurity, including DFARS 252.204-7012 and CMMC Level 2 requirements. Offerors must comply with the Buy American Act and the Berry Amendment, and those seeking HUBZone small business price evaluation preferences must be SBA certified. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-27-T-6111
Solicitation SPE4A6-27-T-6111 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 313 indicator lights. The required items are identified by NSN 6210-01-477-7817 and correspond to RIX Industries part number A160-354 or Schneider Electric USA part number KP7G31. This is not a small business set-aside, and quotes must be submitted via the DIBBS system. The need ship date is April 20, 2027, with an original required delivery date of August 24, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List via RA001, and there is a specific prohibition against the intentional addition of mercury or mercury-containing compounds per NAVSEA 5100-003D. Offerors must comply with various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity standards such as DFARS 252.204-7012. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
BODY, ADAPTER, AIRCRA
Solicitation # SPE4A7-26-T-750Y
Solicitation SPE4A7-26-T-750Y is a request for quotations issued by the Defense Logistics Agency Aviation for the procurement of two aircraft adapter bodies, identified by NSN 4933-01-591-6342. The required delivery date is July 16, 2027, with delivery to the DLA Distribution DDSP New Cumberland Facility. This procurement is a non-small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone small business concerns. Notably, the government explicitly prohibits the use of additive manufacturing for these items, and any offers utilizing such processes will be ineligible for award. The contract mandates strict adherence to technical and quality requirements, including destination inspection and acceptance per FAR 52.246-2. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging and marking must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the award requires compliance with CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically via Wide Area WorkFlow.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-27-T-0331
Solicitation SPE7M8-27-T-0331 is a fixed-price, total small business set-aside issued by the DLA Weapons Support Electrical Devices Division for the procurement of 48 push switches, identified by NSN 5930-01-369-7561. The requirement specifies a delivery timeline of three days after order, with shipping terms set as FOB Origin and delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination, with quality assurance governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance under certain sampling plans. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. This procurement is subject to various Federal Acquisition Regulation clauses, including those regarding hazardous material identification, sustainable products, and the safeguarding of covered defense information.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
ELECTRODE ASSEMBLY
Solicitation # SPE4A6-27-T-5827
Solicitation SPE4A6-27-T-5827 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 36 Electrode Assemblies, identified by NSN 6150006590677 and Part Number 40194P100P. This item is designated as a critical application item. The procurement is a total small business set-aside under NAICS 334419, with a required delivery date of June 19, 2027, and a need ship date of April 20, 2027. Delivery, inspection, and acceptance are all established as FOB Origin, with the final destination being the DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection will be conducted at the origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, where acceptance requires zero non-conformances. Special prohibitions are in place regarding the use of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Additionally, offerors must comply with the Buy American Act and Berry Amendment, and are prohibited from using additive manufacturing processes unless specifically authorized. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-6471
Solicitation SPE4A6-27-T-6471 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 16 electrical special purpose cable assemblies, identified by NSN 6150012213563 and Kidde Technologies part number 35302-217. This is not a small business set-aside and falls under NAICS code 334419. The required delivery date is August 24, 2027, with delivery terms set as FOB Origin and both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including configuration change management and the removal of government identification from non-accepted supplies. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act, the Berry Amendment, and various cybersecurity and telecommunications regulations, including DFARS 252.204-7012 and 252.204-7016. Payment will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
NRP, BOARD, PC, LOAD C
Solicitation # SPE7M5-27-T-1165
Solicitation SPE7M5-27-T-1165 is a fixed-price request for quotes issued by the DLA Weapons Support Active Devices Division for the procurement of 34 units of NRP, BOARD, PC, LOAD C (NSN 5999016200473). The approved source for this item is 0TZM0 7000AG1040-1. Quotes must be submitted electronically via the provided link by the response deadline of October 30, 2026. Delivery is scheduled for DLA Distribution Jacksonville, with a need ship date of April 1, 2027, and an original required delivery date of August 12, 2026. The contract requires strict adherence to packaging and marking standards, including MIL-STD-129 and ASTM D3951 for non-hazardous materials, while hazardous materials must follow FED-STD-313 and TQ requirement IP025. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance mandates include CMMC Level 2 Self-Assessment, the Buy American Act, and the Berry Amendment. Offerors must provide their CAGE code and unique entity identifier, and they must certify that they do not provide covered defense telecommunications equipment or services from prohibited sources.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-6193
Solicitation SPE4A6-27-T-6193 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 21 electrical special purpose cable assemblies, identified by NSN 6150-01-571-5564 and JLG Industries part number 4923556. The requirement is not a small business set-aside and falls under NAICS 334419. Delivery is required by October 31, 2027, with a need ship date of May 25, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-5616
Solicitation SPE4A6-27-T-5616 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 10 special purpose electrical cable assemblies, identified by NSN 6150015756913. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of September 16, 2027, and a need ship date of April 6, 2027. Shipping is designated as FOB Origin, while both inspection and acceptance will occur at the destination. The procurement mandates strict adherence to quality and technical standards, including ISO 9001:2015 compliance and specific sampling methods per MIL-STD-1916 or ASQ H1331. Key security and compliance requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and compliance with the Buy American Act and Berry Amendment. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the contract prohibits the intentional addition of mercury to hardware, except in specific functional cases approved by NAVSEA. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335999
New
DIBBS
Manufacturer of Special Purpose Electrical Cable Assemblies (NSN 6150-01-496-6576)This subcontract opportunity, issued by the DLA Weapons Support ASC Commodities Division for the Department of Defense, seeks a manufacturer to provide 70 special purpose electrical cable assemblies annually. The selected contractor will be responsible for the fabrication, assembly, and testing of units according to NSN 6150-01-496-6576 specifications. Strict adherence to military standards is required, specifically MIL-STD-2073-1E and SPI# AM12476747 for packaging, and MIL-STD-129 for marking. The contract is designated as a total small business set-aside under NAICS code 335999. Eligible bidders must possess a valid CAGE code and demonstrate full compliance with DFARS 252.204-7016. Interested parties must submit their responses by November 10, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 9 days
View Details
NAICS: 423840
New
DIBBS
Authorized Distributor - Dome Light (NSN 6220-01-016-4888)This subcontract involves serving as an authorized distributor of dome lights, specifically NSN 6220-01-016-4888, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for sourcing hardware from approved manufacturers and ensuring strict supply chain traceability documentation is maintained and delivered with all hardware. Shipping is managed on an FOB Origin basis to destinations within the continental United States. To qualify for this role, the contractor must hold eJCP certification and maintain CMMC Level 2 compliance to ensure the secure handling of controlled data. The opportunity is categorized under NAICS code 423840 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of November 9, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 334516
New
DIBBS
OEM Manufacturer - Dome Light (NSN 6220-01-016-4888)This subcontract opportunity is for an OEM manufacturer to produce dome lights meeting NSN 6220-01-016-4888 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for delivering completed and warranted lighting units that adhere to strict quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and marking requirements governed by MIL-STD-2073-1E and MIL-STD-129 respectively. To be eligible for this project, manufacturers must hold eJCP certification and maintain CMMC Level 2 compliance. The contract falls under NAICS code 334516 and was posted on October 30, 2026, with a response deadline of November 9, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
International Freight Forwarding (US to Taiwan)This subcontract opportunity is for international freight forwarding services supporting prime contractors on DLA Weapons Support ASC projects. The selected provider will coordinate the transport of materials from various US origins to the Taiwan Army Zuo-Ying Ammunition Sub No. 127 located in Kaohsiung City. All shipments must be managed in strict accordance with DFARS 252.247-7023 and MIL-STD-129 marking requirements to ensure regulatory compliance. The contract is designated as a total small business set-aside under NAICS code 488510. Due to the nature of the defense materials involved, the contractor must possess ITAR export capabilities and maintain CMMC Level 2 certification for the handling of covered defense information. Responses for this Department of Defense requirement are due by November 6, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 423840
New
DIBBS
Supply of Pressure Transmitters (NSN 6620-01-346-9340)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the supply of five warranted pressure transmitters. The contractor must provide genuine Ontic Engineering and Manufacturing parts, specifically part number 418-44044 under NSN 6620-01-346-9340. All deliverables must adhere to MIL-STD-1916 or ASQ H1331 inspection standards and follow MIL-STD-2073-1E packaging requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. To ensure security and quality control, the contractor is required to complete a CMMC Level 2 self-assessment and maintain traceability in accordance with DFARS 252.246-7007 and 252.246-7008. The response deadline for this requirement is November 6, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334210
New
DIBBS
Supplier of STA-STA Phone Lines (NSN 5995-01-394-8641)This subcontract opportunity is for the supply of STA-STA phone line assemblies, specifically NSN 5995-01-394-8641, to support prime contractors fulfilling DLA supply contracts. The selected provider must source or manufacture components that meet all technical specifications and ensure packaging complies with RP001 DLA Packaging Requirements for Procurement. The contract requires the delivery of 140 packaged units annually. Eligible bidders must possess a valid CAGE code and strictly adhere to prohibitions regarding foreign-sourced products. This is a Total Small Business Set-Aside under NAICS code 334210, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. The response deadline for this requirement is November 29, 2026.
Telephone Apparatus Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 541380
New
DIBBS
Bearing Testing and Inspection ServicesThis subcontract for Bearing Testing and Inspection Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform specialized quality inspections and testing for prime contractors, ensuring strict adherence to DLA technical requirements and limited rights data. Key technical responsibilities include source inspection and the verification of MIL-DTL-197M preservation standards using precision measurement tools, hardness testers, and metrology equipment. To qualify, contractors must maintain ISO 9001:2015 certification and complete a CMMC Level 2 self-assessment. The primary deliverables for this engagement are detailed inspection reports and official test certificates. Interested parties must submit their responses by November 13, 2026, under NAICS code 541380.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Annular Ball Bearing ManufacturerThis subcontract involves the manufacture of precision annular ball bearings, specifically Part Number 3151-252, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production process must strictly adhere to source-controlled requirements, limited rights data, and MIL-DTL-197M preservation standards. To qualify, the manufacturer must possess specialized precision bearing machining and grinding equipment and maintain ISO 9001:2015 certification along with a CMMC Level 2 self-assessment. The contract is categorized under NAICS code 332999 and requires finished bearings to be delivered FOB Destination. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
Special Purpose Electrical Insulation Sleeving (Manufacturer/Supplier)This subcontract opportunity is issued by the Department of Defense DLA Weapons Support ASC Commodities Division for the manufacture or supply of special purpose electrical insulation sleeving. The contractor is required to provide 300 units of NSN 5970-01-074-2591, ensuring compliance with SAE AS85049F Revision F and QPL-AS85049-QPD standards. All deliverables must feature a 48-month extendable shelf life, with marking and packaging performed according to MIL-STD-129 and MIL-STD-2073-1E specifications. Eligible bidders must hold QPL/QML approved manufacturer status or be an authorized distributor. This procurement is designated as a Total Small Business Set-Aside under NAICS code 332410. Interested parties must submit their responses by the deadline of November 9, 2026.
Power Boiler and Heat Exchanger Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Military-Spec Packaging and Preservation ServicesThis subcontract for Military-Spec Packaging and Preservation Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The scope of work involves the specialized packaging, preservation, and marking of precision bearing cups for prime contractors. All activities must strictly adhere to military standards, specifically utilizing MIL-DTL-197M for packaging and preservation and MIL-STD-129 for shipment marking. The selected provider must employ labeling and marking equipment that complies with these military specifications to ensure all bearing cups are ready for FOB Destination shipment. This opportunity falls under NAICS code 488510, with a response deadline set for November 20, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332991
New
DIBBS
Manufacturer of Tapered Roller Bearing Cups (NSN 3110-01-398-0704)This subcontract involves the manufacture of precision tapered roller bearing cups, identified by NSN 3110-01-398-0704, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected manufacturer must utilize precision machining equipment to fabricate components that strictly conform to Drawing 9235611, Revision H, and all associated Technical Data Packages. To be eligible, the provider must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.225-7016 domestic sourcing requirements. The project falls under NAICS code 332991, with a response deadline set for November 20, 2026.
Ball and Roller Bearing Manufacturing

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-27-T-5815
Solicitation SPE4A6-27-T-5815 is a Request for Quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of four eye bolts (NSN 5306-00-159-5362). Designated as critical application items, the bolts must be manufactured according to basic drawing NR 80064 2584025 Revision J and reference drawing NR OMLM6 2584542 Revision AA. The required delivery date is August 18, 2027, with a need ship date of April 20, 2027, for delivery to DLA Distribution Albany in Georgia. This is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone concerns. The contract mandates strict quality and security compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the government will not evaluate or award offers involving items produced via additive manufacturing. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334419
Awarded
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-27-T-0872
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS