Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-05CUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a special-purpose electrical cable assembly identified by NSN 6150-01-632-3571 and part number 13608291-2, with a quantity of six units to be delivered FOB origin within 172 days, with no tolerance for variance in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA Packaging Requirements, and all marking must adhere to physical identification standards including bare item marking and government identification removal for non-accepted supplies. The cable assembly is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and all applicable technical and quality provisions from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise specified, and critical attributes are assigned stringent verification levels. The contract references DLA Procurement Notes for transportation and shipping logistics and mandates compliance with all incorporated requirements, including those governing covered defense information. The solicitation number is SPE4A6-26-T-05CU, issued by the ASC Commodities Division of the Department of Defense, with a response deadline in August 2026 and a required ship date of March 8, 2026.

General Info

DOD seeks six cable assemblies via NSN 6150-01-632-3571, proposals due July 17, 2026, through DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05CU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Bradley Willis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
CELLTRON, INC. 62765 P/N 13608291-2
SPE4A6-26-T-05CU
SECTION B
PR: 7013722079 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7013722079 0001 EA 6.000
NSN/MATERIAL:6150016323571
DELIVERY (IN DAYS):0172
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/08/2026 Original Required Delivery Date:09/12/2026
SPE4A6-26-T-05CU
SECTION B
PR: 7013722079 PRLI: 0001 CONT’D

SPE4A6-26-T-05CU NSN/Part Number: 6150-01-632-3571 Quantity: 6 EA Purchase Request: 7013722079QTY: 6 Delivery: 172 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
ADAPTER, POWER SUPPLY
Solicitation # SPE7L7-26-T-4366
The contract is for the procurement of seven power supply adapters with part number 61091820-000 and NSN 6130-01-616-4165, issued under solicitation SPE7L7-26-T-4366 as a total small business set-aside. The item must be delivered FOB origin in 416 days with a required delivery date of October 14, 2026, and a need ship date of September 20, 2027. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized as specified. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise stated, with verification levels tied to critical, major, and minor attributes. The supplier must maintain CMMC Level 2 cybersecurity self-assessment compliance, and government identification must be removed from non-accepted supplies. The unit price is $7.00 per each, totaling $49.00 for the order. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract is governed by DLA’s standardized acquisition framework and includes detailed quality, marking, and cybersecurity obligations applicable to federal procurement.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
NRP, POWER SUPPLY
Solicitation # SPE7L7-26-T-4238
The contract pertains to the procurement of a power supply item with the NSN 6130016010607 and part number 608818-00 from Thales Defense & Security Inc, requiring delivery of one unit within 168 days under a firm fixed-price arrangement with no variance allowed in quantity. Delivery is to be made FOB origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality standards, including MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA packaging requirements, and is subject to Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. Cybersecurity requirements mandate CMMC Level 2 self-assessment, and the supply must not contain intentional mercury or mercury compounds except in specific exempted applications. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stipulated, and critical attributes are governed by stringent verification levels. The contract falls under a simplified acquisition, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. The power supply is designated as a critical application item, and transportation, shipping, and packaging instructions align with DLA procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4521
This contract pertains to the supply of 31 units of a power supply identified by NSN 6130017217533 and part number VI-LU1-IY from VICOR CORP, with a required delivery within 307 days of the contract date, to be shipped FOB origin. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances permitted unless otherwise stated; attributes are assigned verification levels or AQLs based on severity, and unspecified attributes are treated as major. The delivery destination is specified as DLA Dist San Joaquin warehouse in Tracy, CA, with the same location serving as the freight shipping address and inspection and acceptance point. The contract mandates strict adherence to DLA packaging and palletization requirements, with no tolerance for quantity variance—exactly 31 units must be delivered. Compliance with DLA Procurement Notes C19 and C20 is required for transportation and first destination logistics, and all data must align with DoD unit of issue standards as referenced in official DLA documentation.
DLA DIST SAN JOAQUIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
Solicitation # SPE4A7-26-T-590V
The contract pertains to the procurement of 159 units of a Commercial Off-the-Shelf (COTS) Terminal Junction Block, Sectional, with NSN 5940-01-185-5550 and part number 592840-1, manufactured by TE Connectivity Corporation. Delivery is required within 37 days of award, with an original required delivery date of July 9, 2026, and a need ship date of September 6, 2026. The item is to be delivered FOB Origin to DLA Distribution Jacksonville at Bldg 175 Swan Road, Jacksonville, FL 32212-0103, where government inspection and acceptance will occur. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including specific palletization requirements under RP001 and mandatory marking and labeling per MIL-STD-129, consistent with the Unit of Issue and Quantity per Unit Pack specified. Bar-coding is required as part of MIL-STD-129 compliance, and all packaging must be free of government identification if non-accepted. The solicitation number is SPE4A7-26-T-590V, issued under the DLA Master Solicitation for Automated Simplified Acquisitions, Revision 105, and is restricted to Women-Owned Small Businesses under the WOSB program with a NAICS code of 335999. Pricing is not explicitly stated but the contract is structured as a fixed-price arrangement under simplified acquisition procedures. All contractual obligations are governed by a comprehensive set of FAR and DFARS clauses including cybersecurity requirements under 252.204-7012, safeguarding of covered defense information, prohibitions on certain equipment and services, whistleblower protections, and electronic invoicing via WAWF. Offerors must validate their size status and socioeconomic certifications, particularly for WOSB eligibility, and disclose any covered defense telecommunications equipment or services using their Unique Entity ID and CAGE code. Technical compliance must align with the referenced Technical Data Package Revision A, and all submissions must be electronically filed through the DIBBS portal by July 30, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4519
The solicitation seeks the procurement of 29 units of NSN 6130016779619 POWER SUPPLY to be delivered to W1A8 DLA DISTRIBUTION within 253 days after award, with quotes required to be submitted electronically only and no hard copies available. Approved sources for this item are limited to three specific vendors: 02769 8567542, 9T790 CA1000 J10074B, and 9T790 J10074B. The solicitation, identified as SPE7L726T4519, is posted under a combined solicitation type with no set-aside designation, and the NAICS code listed is 335999 for other electrical equipment and component manufacturing. The offering agency is the DLA Land and Maritime under the Department of Defense, with the office located in Columbus, Ohio. All responsible sources may submit a quote provided it is received before the deadline of August 10, 2026, though no specifications, plans, or drawings are provided. Questions must be directed via email to the designated point of contact, and the full solicitation document may be accessed through the SAM.gov link or by searching the solicitation number on the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4527
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CO
Solicitation # SPE4A6-26-T-10NH
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE7M2-26-T-5804
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, WASHER
Solicitation # SPE4A6-26-T-10MD
The contract is for 18 insulators, washers with NSN 5970-00-427-0946, issued under solicitation SPE4A6-26-T-10MD by the Defense Logistics Agency’s Commodities Division under the Department of Defense. Delivery is required within 20 days of award, with proposals due by August 7, 2026. The item is subject to export control under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons within or outside the U.S. without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling, and access is restricted to DLA contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and approved questionnaire submission. The contract also requires compliance with DLA packaging standards, CMMC Level 2 certification for any third-party assessors, and proper physical identification and marking of the item. The primary point of contact is Roberto Roldan, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-10LH
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
STUFFING TUBE
Solicitation # SPE7M2-26-T-5811
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A1-26-T-2501
AVIATION SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335139
New
DIBBS
LAMP, SODIUM
Solicitation # SPE4A6-26-T-10SP
This contract is for the procurement of sodium lamps classified as commercial off-the-shelf (COTS) items under NSN 6240005513098 and part number A-A-1757 Type 3, with emitted light characteristics specified as white. The unit of issue is a box (BX), with each box containing twenty lamps, and the total quantity required is 508.4 boxes. Delivery is FOB origin with a 178-day lead time and no variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special fragile marking and palletization per DLA packaging requirements. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item and must not contain intentional mercury additions except for limited functional uses in batteries, fluorescent lights, or specified instruments, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Safety documentation including SDS and OSHA-compliant hazard warning labels must be reviewed and approved by technical personnel prior to award, with copies submitted to the DLA Aviation HMIRS office. The solicitation is a total small business set-aside under NAICS code 335139, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of August 7, 2026.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-11AN
The contract calls for the procurement of 2,000 shear bolts with a specified size of 1/2 inch nominal diameter, 20 threads per inch UNS-3A, and a nominal length of 1.812 inches. The bolts must be manufactured entirely from Nickel Alloy 718 and receive a passivate surface treatment. Manufacturing must adhere to Reference Drawing 80489, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling unless modified by amendment. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The NSN is 5306-01-162-8522 and the purchase request number is 7015132759. The solicitation, issued under SBA Total Small Business Set-Aside, has a response deadline of August 7, 2026, with delivery required within 245 days after contract award to Cherry Point, NC, 28533-5040. Primary point of contact is Monica Clark from the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ROUND
Solicitation # SPE4A6-26-T-09DG
The contract is for the procurement of 10 plain round nuts identified by NSN 5310-01-527-3417, classified as a commercial off-the-shelf item, under solicitation number SPE4A6-26-T-09DG. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and was posted on July 22, 2026, with responses due by July 30, 2026. The delivery requirement specifies an acceptance date of 170 days after order, and the place of performance is in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identifiers removed prior to return. The contracting office is the ASC Commodities Division under the Department of Defense, and the primary point of contact is Myonka Boyd, reachable via email and phone listed in the contract data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
FIRE HANDLE ASSY
Solicitation # SPE4A6-26-T-10NR
The contract solicitation seeks three fire handle assemblies under NSN 6340010302328, with delivery required to the DLA Distribution Depot in Oklahoma within 123 days after award. The only approved source for this item is identified as 81590 with the part number 259-659-1001-002. This is an RFQ issued under solicitation number SPE4A6626T10NR, posted on July 30, 2026, with responses due by August 7, 2026. All responsible suppliers may submit quotes electronically; hard copies of the solicitation are not available, and no specifications, plans, or drawings are provided. The procurement is classified under NAICS code 334511 and is managed by the DLA Aviation office in Richmond, Virginia, under the Department of Defense. Questions must be directed via email to the designated point of contact, and the full solicitation document can be accessed through the SAM.gov link provided.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-08SJ
The contract solicitation SPE4A6-26-T-08SJ requires the supply of 50 machine bolts with part number 803-1385637-02X-23 and NSN 5306-01-482-4720, to be delivered to the DLA Distribution facility in New Cumberland, PA, within 171 days after order issuance, with FOB Origin terms. The item must comply with stringent technical specifications including MIL-DTL-1222J for surface marking, MIL-STD-1916 for sampling and inspection, MIL-STD-2073-1E for packaging, and MIL-STD-129 for labeling and barcoding, which mandates 2D Data Matrix symbols and human-readable data. Packaging must use Code 10 preservation (cleaning and drying), prohibit mercury and mercury-containing compounds, and meet all DLA-specific packaging requirements. Quality assurance is governed by ISO 9001:2015, requiring a certified quality management system, and all shipments must include mill-material certification. Cybersecurity compliance is mandated at CMMC Level 2, with additional adherence to NIST SP 800-171 and DFARS 252.240-7997 for safeguarding covered defense information. The technical data associated with this item is subject to ITAR and EAR export controls, restricting disclosure to authorized U.S. persons and requiring prior government approval; only DLA contractors with approved JCP certification, completed training, and authorized access may handle the data. Inspection and acceptance are performed at origin by the Government under FAR 52.246-2, with zero non-conformances required. All contractors must comply with FAR and DFARS clauses covering employment eligibility, combating human trafficking, sustainable products, hazardous materials labeling, and prohibitions on internal confidentiality agreements. Payment must be processed through WAWF, and the contract type remains undefined pending award. Offerors must hold a valid UEI and CAGE code, and if claiming small business status, must provide accurate representations under FAR 52.219-28. Pricing data is currently blank, and no contract value has been established. Proposals are due by July 29, 2026, via the DLA-BSM Internet Bid Board System.
Nonferrous Forging

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
DISC, SEAL
Solicitation # SPE4A6-26-T-89Z5
The item is a DISC, SEAL with NSN 1650-01-209-5064, for a quantity of 23 units, under Purchase Request 7017149132, with a delivery requirement of 169 days after contract award. The solicitation is issued under number SPE4A6-26-T-89Z5, posted on July 30, 2026, with responses due by August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce, including to foreign nationals within the U.S. or abroad, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access this technical data. Packaging and inspection requirements are governed by DLA standards, including inspection at origin and removal of government identification from non-accepted supplies. The place of performance is Tinker AFB, Oklahoma, with a NAICS code of 336413. The contracting point of contact is Bryan Distin, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-08WL
The contract pertains to the procurement of 100 socket head cap screws, identified by NSN 5305-01-640-7734, under solicitation SPE4A6-26-T-08WL, with a delivery requirement of 146 days after order receipt to a designated facility in Tracy, California. The item must comply with stringent technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I identifiers, and conform to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and physical identification of each item. The contract mandates zero-defect acceptance through sampling per MIL-STD-1916 or ASQ H1331, with all unspecified attributes treated as major and acceptance criteria requiring zero non-conformances in the sample lot unless otherwise directed. Mercury and mercury-containing compounds are strictly prohibited in the item, its packaging, or process, except for functional uses in specified components like batteries or instruments, which must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting access to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA authorization. The contract employs a fixed-price type with alternate I, and performance is FOB origin, with inspection and acceptance conducted by the government at the destination. Contract administration requires electronic invoicing via WAWF, safeguards for covered defense information per NIST SP 800-171 and DFARS 252.204-7012, and adherence to hazard communication standards. Offerors must represent their small business status and socioeconomic qualifications, and compliance with requirements regarding former DoD officials, whistleblower rights, and prohibitions on hexavalent chromium and covered telecommunications equipment is mandatory. Pricing details are not provided in the solicitation, and award is expected to be based on technical acceptability and price, with no formal weightings disclosed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-09EK
The contract specifies the procurement of 8,169 flat metal washers, hardened and round, with the NSN 5310-00-809-9514, under solicitation SPE4A6-26-T-09EK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 72 days after award, and the item is subject to strict technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking per MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer markings. The washer is classified as covered defense information under RD002, and its associated technical data is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold an approved US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive DLA authorization to access this controlled data. Packaging must comply with DLA packaging requirements, and any non-accepted supplies must have government identification removed. The solicitation closed on July 30, 2026, with a place of performance in New Cumberland, Pennsylvania, and Hannah Shimer is the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A6-26-T-09AE
This contract is for the procurement of 245 incandescent lamps identified by NSN 6240-00-538-0920 and trade number EFR, under solicitation SPE4A6-26-T-09AE. The lamps are classified as commercial off-the-shelf items and must comply with strict technical and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special fragile handling indicated. The items must meet the American National Lamp Standard, which each bidder must procure independently from NEMA ANSI and certify their product matches the specified form, fit, and function. Mercury or mercury-containing compounds are prohibited unless used in functional components like fluorescent lamps or sensors, and in such cases, portable devices must include a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 79 days with no variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery address is Industries of the Blind Inc in Greensboro, NC, with a required ship date of July 21, 2026, and original delivery due by December 29, 2026. Compliance with DLA packaging, transportation, and sourcing requirements is mandatory, and all bidders must reference the DLA Master List of Technical and Quality Requirements for applicable R and I numbers.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-10YM
Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-T-10QV
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-10LD
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details