Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPEC

Active
SPE7L5-26-T-4730Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a special-purpose electrical cable assembly with part number 1771530W and NSN 6150-01-320-0719, issued under solicitation SPE7L5-26-T-4730 for OSHKOSH DEFENSE LLC. A quantity of 298 units is required at a unit price of $298.00, totaling $88,804.00, with delivery mandated within 32 days after award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including labeling per MIL-STD-129 with no special marking. The item is designated as a critical application item, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Technical and quality standards referenced are contained in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. Delivery is to DLA Distribution Red River, Building 499, Texarkana, TX, with a required ship date of September 15, 2026, and an original delivery deadline of November 3, 2026. Transportation and freight procedures follow DLA procurement notes C19 and C20, and the solicitation was posted on August 2, 2026, with responses due by August 13, 2026. The point of contact is Bradley Evans of the Department of Defense, LAND SUPPLIER OPNS ENGINES.

General Info

298 units of cable assembly 1771530W at $298 each, delivery by Sept 15, 2026, FOB origin, CMMC Level 2 required.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L5-26-T-4730 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
Bradley Evans
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPECIAL PURPOSE, ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
OSHKOSH DEFENSE LLC 75Q65 P/N 1771530W
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015993460 0001 EA 298.000
NSN/MATERIAL:6150013200719
DELIVERY (IN DAYS):0032
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L5-26-T-4730
SECTION B
PR: 7015993460 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:09/15/2026 Original Required Delivery Date:11/03/2026
SPE7L5-26-T-4730 NSN/Part Number: 6150-01-320-0719 Quantity: 298 EA Purchase Request: 7015993460QTY: 298 Delivery: 32 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CD
The contract pertains to the procurement of 10 units of LEAD, ELECTRICAL with NSN 6150-00-930-2334 under solicitation SPE4A6-26-T-11CD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, which incorporates referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling and inspection, with zero non-conformances required unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes are treated as major. Physical identification and marking of the item must comply with RQ017 requirements, and the product contains technical data subject to export controls under ITAR or EAR, restricting disclosure to unauthorized foreign persons regardless of location. Access to this controlled data is limited to contractors with approved JCP certification, completion of mandatory DLA export control training, and formal authorization. The contract includes adherence to DFARS 252.225-7048, and all technical and quality provisions are binding as specified in the DLA master documents referenced.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CC
This contract is for the procurement of two special-purpose electrical cable assemblies with part numbers 29-245-12 and 36-170-112-1, identified by NSN 6150-01-065-4810, sourced from CELTECH CORP. The items are classified as critical application components and must comply with stringent cybersecurity requirements, including CMMC Level 2 Self-Assessment and handling of covered defense information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with referenced controls including configuration change management, variance requests, and physical identification per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at designated levels corresponding to critical, major, and minor classifications. Packaging must adhere to MIL-STD-2073-1E and marking per MIL-STD-129 with no special marking code applied. Palletization follows DLA packaging requirements, and units must be delivered FOB origin within 38 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is under solicitation SPE4A6-26-T-11CC with a required delivery date of September 18, 2026, and was posted on August 2, 2026, with a response deadline of August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-Q-0206
This contract pertains to the procurement of a single rotary switch with NSN 5930-01-199-6981, requiring delivery within 90 days of award. The solicitation is issued under SPE7M8-26-Q-0206 with a response deadline of August 15, 2026, and is managed by the Department of Defense’s Electrical Devices Division. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment adopts a later revision. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with limited exceptions for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary per NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. The point of contact for the solicitation is Kitnarone Phengthongsavath, reachable via email and phone, and the contract is accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11FQ
The contract is for a single cable assembly identified by NSN 5995-01-606-4376, with a required delivery within 20 days after award. It is governed by strict technical and quality requirements referenced from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date. The item is subject to cybersecurity compliance under CMMC Level 2, meaning the provider must be a certified third-party assessment organization. Covered Defense Information applies, and all packaging must adhere to DLA standards. Although Item Unique Identification is waived per the service customer’s request, federal regulations governing the removal of government identification from non-accepted supplies remain active. The technical data associated with this cable assembly is subject to U.S. export controls under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and prior approval from DLA. The solicitation, issued under SPE4A6-26-T-11FQ on August 2, 2026, requires responses by August 10, 2026, and is procured by the Department of Defense’s ASC Commodities Division, with performance designated at Cherry Point, North Carolina. The primary point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11HA
The contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-555-9768, with a quantity of 60 units, to be delivered within 158 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance with these specifications is mandatory. The item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. entities. Access to such data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and prior authorization from DLA. Packaging must adhere to DLA-specific procurement standards, and government identification must be removed from any non-accepted supplies. Although Item Unique Identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contractor must hold CMMC Level 2 certification as a C3PAO and meet all documentation and source approval requirements outlined in the contract. The solicitation, numbered SPE4A6-26-T-11HA, was posted on August 2, 2026, with responses due by August 10, 2026. It is classified under NAICS code 334419, administered by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and a ZIP code of 17070-5002. Primary point of contact is Ernest Penrose, reachable via phone and email provided in the contract data. This solicitation is for a federal acquisition and does not specify a small business set-aside. All contractors must comply with cybersecurity, export control, packaging, and documentation mandates before award, and failure to meet these stringent regulatory conditions will result in disqualification.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CE
This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-11CE, with a required delivery of seven units within 193 days from award, delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 5995-01-572-6924 and part number N1912-61017 from Keysight Technologies Inc, with a unit price of $7.00 and zero tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, with specific preservation methods including dry preservation and E5 unit containers. No mercury or mercury-containing compounds may be introduced into the product, its packaging, or associated materials except for limited functional uses explicitly authorized by NAVSEA, and portable devices containing mercury must include a secondary containment barrier. Quality assurance requires zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contractor must adhere to DLA’s master list of technical and quality requirements referenced by R and I numbers, and comply with CMMC Level 2 cybersecurity self-assessment requirements. Physical identification of the bare item is mandatory, and all procedures must align with DLA’s packaging and transportation directives, including the prohibition of mercury in preservation and marking materials as per IP056.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EK
This contract pertains to the procurement of a cable assembly specified under solicitation SPE4A6-26-T-11EK, with the NSN 5995-01-546-8557 and part number 20002506-10, requiring 26 units to be delivered FOB origin within 125 days by December 14, 2026. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging requirements per MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere precisely to Drawing 20002506 and SPI P20002506-10 Revision A dated September 30, 2025, and first article testing for packaging is mandatory, requiring three packaged units to be inspected with documentation, photographs, and certification included in the test report. Production lot testing provisions are also referenced if applicable. The contract enforces strict compliance with cybersecurity standards, requiring a CMMC Level 2 Self-Assessment, and prohibits the intentional inclusion of mercury or mercury compounds in the product except for specific functional exemptions outlined by NAVSEA, with additional containment requirements for portable devices containing mercury. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Inspection and acceptance occur at origin, with no variance permitted in quantity. Configuration change management and source approval documentation are required, and all shipments must be palletized in accordance with DLA packaging directives and delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must provide full documentation for deviations, waivers, and compliance certifications, with all contractual obligations tied to the DLA procurement framework and authorized units of issue.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CW
The contract pertains to the procurement of six units of lead electrical material identified by NSN 6150-99-852-0619 and part number G406/8745, supplied by KNDS DEFENCE UK LIMITED. Delivery is required within five days of award, with shipment originating at the supplier’s location under FOB origin terms and a strict zero variance allowance on quantity. Inspection and acceptance occur at the destination, specifically at the DLA LMP Zone 1 facility in Texarkana, Texas. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required; palletization follows DLA packaging standards. The item is designated as a critical application with no shelf life, and sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan where non-conformances are not permitted unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revision control tied to the solicitation or award date depending on acquisition size. Shipping must be conducted via the fastest traceable means, explicitly excluding parcel post, and all documentation references the assigned contract SPE4A6-26-T-11CW with a required delivery date of July 15, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EE
This contract pertains to a special-purpose electrical cable assembly with stringent technical, quality, and compliance requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and applicable revisions are determined by the solicitation or award date depending on acquisition size. The item is source controlled, meaning it must be manufactured and tested using limited rights data accessible only to qualified vendors who can demonstrate traceability to approved sources; only those with access to this data or the ability to conform to its specifications may submit quotes, and a SAR package is mandatory for any entity seeking source approval. The assembly must comply with DLA packaging standards, removal of government identification from rejected items, and physical marking requirements. Cybersecurity compliance mandates CMMC Level 2 certification via an accredited third-party assessment organization. The item is subject to stringent export controls under ITAR or EAR, restricting technical data disclosure to foreign persons both inside and outside the U.S., and access is limited to contractors with JCP certification, completed DOD export control training, and formal DLA approval. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications like batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels based on criticality. The NSN 6150-01-258-3719 requires 13 units to be delivered within 54 days of award, with the solicitation issued on August 2, 2026, and responses due by August 10, 2026, under contract number SPE4A6-26-T-11EE, managed by the DLA Commdities Division, with primary point of contact at Ashley Sheppard.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11EQ
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150016191083 and part number A034F322 from CUMMINS POWER GENERATION INC., with a total quantity of 16 units to be delivered under solicitation SPE4A6-26-T-11EQ. The item is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned verification levels or AQLs based on their classification. Deliveries must be made FOB origin within 157 days of contract award to the designated DLA Distribution Depot at Hill AFB, Utah, with no variance allowed in quantity. All packaging and palletization must comply with DLA’s proprietary packaging requirements, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract specifies a unit price of $16.00, resulting in a total value of $256.00, and requires compliance with DoD unit of issue standards. The point of contact for inquiries is Chinh Le, with the response deadline having passed on August 10, 2026, and the original delivery date set for January 15, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L1-26-T-904Y
The contract pertains to the procurement of a single unit of a wiring harness with NSN 6150-01-578-2113 and part number 3444019, issued under solicitation SPE7L1-26-T-904Y by the Department of Defense’s Land Supply Chain. Delivery is requested within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. The shipment must be delivered via traceable freight, excluding parcel post, to the specified military address at Fort Benning, Georgia. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and must comply with all applicable DLA technical and quality standards referenced via the DLA Master List. Government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers, project codes, and delivery instructions for government use only.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 333618
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L5-26-T-4727
The contract is for the procurement of a fuel injection nozzle with part number 1W8207 and NSN 2910012064532, supplied by CATERPILLAR INC, under solicitation SPE7L5-26-T-4727. Four units are required to be delivered within 45 days of contract award with a strict zero variance in quantity, delivered FOB origin to the designated receiving warehouse in Tracy, California. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951; packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including proper palletization. The units must be labeled and marked correctly per contract specifications, with the Unit of Issue as a single unit and Quantity per Unit Pack set to one. Inspection and acceptance occur at the destination, and delivery is required by June 5, 2026. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the point of contact is Randy Ith with the Department of Defense.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L5-26-T-4732
The contract pertains to the procurement of one bracket, angle item with NSN 5340016060220 and purchase request number 7016785760, totaling four units across two line items—one unit and three units respectively—with a firm fixed price of $3.00 total and no quantity variance permitted. Delivery is required within 88 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, while hazardous materials require compliance with TQ requirement IP025. All items must be palletized per RP001 guidelines and packed with a quantity per unit pack of one. Two delivery addresses are specified: one for New Cumberland, Pennsylvania, and one for Barstow, California, with corresponding parcel post and freight shipping instructions. The required ship date is November 10, 2026, with the original delivery deadline set for January 25, 2027. Transportation directives reference DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L5-26-T-4732, categorized under NAICS code 332510, managed by the Department of Defense’s Land Supplier Operations Engines, with primary contact Bradley Evans.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L5-26-T-4726
This contract pertains to the procurement of five units of a covered access item identified by NSN 5340011800621 and part number P12613027N from Fairbanks Morse, LLC, to be delivered within 189 days from the contract award with a required ship date of February 19, 2027. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination warehouse located in Tracy, California. Packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation methods and container codes outlined, and palletization must comply with DLA packaging requirements. The item is classified as a critical application item, and all packaging, preservation, and marking processes are prohibited from containing mercury or mercury compounds, with exceptions only for approved functional uses in batteries, lighting, instruments, sensors, weapon systems, or specific chemical reagents as defined by NAVSEA. Portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List, and documentation for source approval must meet RC001 requirements. Government identification must be removed from non-accepted supplies, and the contract falls under DLA’s simplified acquisition procedures with terms controlled by the revision of the Master List in effect on the solicitation issue date. All shipments must comply with hazardous materials handling procedures and use the designated parcel post and freight shipping address.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L5-26-T-4725
The contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-546-9412 and part number 00085140708, supplied by Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4725. Delivery is required within 173 days, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required and no use of mercury or mercury compounds in preservation, packaging, or marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must meet RC001 standards. Mercury-containing components are prohibited except in specific instances such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any such devices must include a secondary containment. The items are subject to a zero variance in quantity and must be palletized per DLA packaging requirements. The point of contact for inquiries is Christopher Walker, and the solicitation closed on August 10, 2026, with a required delivery date of January 31, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336390
New
DIBBS
PIPE, EXHAUST
Solicitation # SPE7L5-26-T-4729
The contract pertains to the procurement of four exhaust pipes identified by NSN 2540015662444 and part number 3642499 under solicitation SPE7L5-26-T-4729, with a unit price of $4.00 per unit and a total contract value of $16.00. Delivery is required within 116 days from the contract award, with FOB origin terms and no tolerance for quantity variance—exactly four units must be delivered. Inspection and acceptance occur at the destination, which is the DLA Distribution facility in New Cumberland, Pennsylvania, with specific shipping instructions outlined in DLAD Proc Note C19 and C20. Packaging must comply with DLA Master List requirements, prioritizing any technical or quality specifications referenced by R or I numbers over standard commercial practices; if the item is non-hazardous under Fed-Std-313, it must be packaged per ASTM D3951, otherwise per TQ requirement IP025, and all packaging must be labeled per MIL-STD-129. The unit of issue is each, and palletization must adhere to DLA packaging standards. The original required delivery date was November 23, 2026, but the need ship date is set for December 8, 2026, reflecting a flexible timeline under the 116-day delivery window. The contract falls under NAICS code 336390 and is administered by the Department of Defense’s Land Supplier Operations Engines office, with Bradley Evans listed as the primary point of contact.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
DIBBS
PACKING RING ASSEMB
Solicitation # SPE7L5-26-T-4733
This contract pertains to the procurement of a packing ring assembly identified by NSN 2825-00-421-7496 and part number 571L146PC43, with a total quantity of 13 units under unit of issue AY. The requirement is governed by stringent packaging and preservation standards per MIL-STD-2073-1E and MIL-C-16173, mandating immediate preservation of ferrous metal labyrinth packing rings with P-2 preservative after cleaning, while nonferrous materials are exempt. Each ring segment must be individually bagged and overwrapped with quarter-inch thick cushioning material conforming to PPP-C-850, Type II, Class 1, segregated by ASTM D4727 fiberboard separators and cushioned within the container with at least one inch of compliant cushioning material. Sets weighing under 40 pounds must be packaged in ASTM D5118 fiberboard boxes, while those 40 pounds or heavier require overseas-style wood boxes per ASTM D6251 or PPP-B-621, closed and strapped with flat steel strapping conforming to ASTM-D-3953 Finish C. All packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with no allowance for quantity variance. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the required delivery date is 86 days from the contract award, with a need ship date of August 4, 2026, and original delivery due by September 11, 2026. The item is designated as a critical application and is subject to DLA’s technical and quality requirements referenced through the DLA Master List, and the supplier must comply with mercury restrictions, prohibiting intentional addition or direct contact unless exempted for specific functional uses such as batteries or sensors, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Additionally, the contractor must maintain CMMC Level 2 cybersecurity self-assessment compliance and fulfill all terms under a Total Small Business Set-Aside, with performance addressed to the DLA San Joaquin Distribution Center in Tracy, California.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
CONNECTING ROD, PIST
Solicitation # SPE7L5-26-T-4737
The contract is for the procurement of 168 connecting rods for pistons, identified by NSN 2815-01-271-5119 and part numbers 2DR678 from OSHKOSH DEFENSE LLC and 5266243 from CUMMINS INC. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The item may involve casting or forging processes, and contractors are directed to submit a Casting and Forging Assistance Request if they lack necessary tooling or materials. Delivery must be made FOB origin within 79 days of contract award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and be marked per MIL-STD-129 with special marking code 24 indicating openness for inspection. Packaging must align with DLA’s initiative to reduce plastic use while ensuring adequate protection. The contract is a total small business set-aside under NAICS code 333618, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The required ship date is November 1, 2026, and the solicitation closed on August 13, 2026, with prime contact Bradley Evans at DLA.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L5-26-T-4731
The contract pertains to the procurement of a wiring harness with NSN 6150-01-514-1692 and part number 3462464, for a quantity of six units, under solicitation SPE7L5-26-T-4731. Delivery is required within 88 days of the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking requirements per MIL-STD-129. Special handling applies as the item is designated as protected cargo, requiring omission of all item nomenclature on shipping containers to ensure security and confidentiality. The packaging must also indicate reusable container status per MIL-STD-2073-1 Appendix C, with clear labeling for reuse. Cables must be coiled to minimize volume without compromising functionality or damaging connectors, and secured to prevent kinking. The delivery address is DLA Dist San Joaquin in Tracy, California, and transportation follows DLA procurement notes C19 and C20. This item is classified as a repairable component and must be packaged in containers that allow for return and reuse. The unit price is $6.00 per unit, with a total contract value of $36.00. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the original required delivery date is January 25, 2027, though the need ship date is November 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the controlling revision determined by the solicitation or award date. The point of contact for this procurement is Bradley Evans of the Department of Defense, reachable via email and phone listed in the contract data.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
MUFFLER, EXHAUST
Solicitation # SPE7L5-26-T-4728
This contract is for the procurement of a muffler and exhaust component identified by NSN 2990-01-366-7020 and part number 88-21109, supplied by NELSON GLOBAL PRODUCTS, INC. with contract number SPE7L5-26-T-4728. The item must strictly conform to the source-controlled drawing and technical specifications referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. All items must meet configuration control standards and require adherence to strict environmental restrictions including a complete prohibition of Class I ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific authorized applications such as batteries, fluorescent lights, and instrument sensors as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract mandates packaging in accordance with ASTM D3951, but DLA requirements supersede this standard, and all packaging must be labeled per MIL-STD-129 and palletized per DLA Packaging Requirements. Items are to be delivered FOB origin, with no variance allowed in quantity, inspected and accepted at destination, and must be ready for delivery by February 3, 2026, under a 61-day delivery schedule. Packaging and shipping details are governed by DLA procedures including designated delivery address in New Cumberland, Pennsylvania. The contract also identifies the item as a critical application item with potential covered defense information, and all substitutions or deviations require formal engineering change proposals and approval.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE7L5-26-T-4736
The contract pertains to the supply of spacer sleeves identified by NSN 5365-01-547-5873 and part number 26001900088, with a total quantity of twelve units to be delivered within five days. All items are classified as commercial off-the-shelf and must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. Packaging must be palletized according to DLA guidelines, and shipment must occur via the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The item is designated as a critical application component, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except in specific sanctioned uses such as batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as mandated by NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. All documentation references the DLA Master List of Technical and Quality Requirements, and the solicitation number SPE7L5-26-T-4736 is a total small business set-aside under NAICS code 332999. Delivery is directed to the U.S. Naval Station in National City, California, with the original required delivery date set for July 24, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
FITTING ASSEMBLY, AI
Solicitation # SPE7L5-26-T-4734
The contract is for a fitting assembly designed for an air flow sensor, identified by NSN 4730-01-297-8354, with a quantity of 35 units required under purchase request 7013880302. The item is subject to strict export control regulations due to the presence of technical data governed by either the International Traffic in Arms Regulations or the Export Administration Regulations, making unauthorized disclosure to foreign persons—regardless of location—a violation. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA authority. The Defense Logistics Agency enforces these restrictions under DFARS 252.225-7048 to ensure compliance with national security requirements. Delivery is mandated within 93 days after order issuance, with performance located at Cherry Point, North Carolina, 28533-5040. The solicitation, issued under number SPE7L5-26-T-4734, was posted on August 2, 2026, with responses due by August 13, 2026, and falls under NAICS code 332996 for other miscellaneous fabricated metal product manufacturing. The contracting entity is the Department of Defense via the Land Supplier Operations Engines organization, with Paul Doerfler listed as the primary point of contact for inquiries, reachable via email and phone provided. The solicitation is classified as a federal procurement with no set-aside designation, and all interested parties must navigate the DIBBS portal to access full documentation and submit proposals. Compliance with packaging requirements as defined by DLA and strict adherence to export control protocols are mandatory conditions for participation and contract award.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, ACTUATOR
Solicitation # SPE7L5-26-T-4735
The contract is for the procurement of 50 units of a PLUG, ACTUATOR with NSN 4730-00-549-3599 and part number 41001053 manufactured by WOODWARD HRT INC, classified as a critical application item. Delivery is required within 132 days of the award, with the original required delivery date set for August 1, 2026, and the need ship date specified as April 21, 2026. The item is to be delivered FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require an Engineering Change Proposal or Request for Variance, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA) at a unit price of $50.00, totaling $2,500.00, and all shipments must be sent to the designated receiving warehouse in Tracy, California, with transportation details governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7L5-26-T-4735, with a response deadline of August 13, 2026, and the contract is managed under NAICS code 332996.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details