Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

CABLE ASSEMBLY, SPEC

Awarded

SPE4A6-26-U-2791Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is an indefinite delivery vehicle for a cable assembly specification, with an estimated quantity of 20,000 units and a ceiling value of $350,000.00, allowing for flexible order volumes within that maximum limit. It was awarded under solicitation number SPE4A626U2791, posted on June 11, 2026, and falls under NAICS code 335931, which pertains to other electrical equipment and component manufacturing. The contracting office is DLA Aviation, part of the Department of Defense, located in Richmond, Virginia, with Heather Spadaro designated as the primary point of contact via email. There is no specified set-aside type, indicating the award is open to all eligible contractors without restrictions based on small business or other categories. The place of performance has not been defined in the provided data, leaving the delivery locations flexible depending on operational needs. All procurement activities and communications will be managed through the SAM.gov platform linked in the contract details.

General Info

Procurement of 20 cable assemblies via small business set-aside, one-year IDC, $350K max.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$350,000

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Awardee

IMMECOR CORPORATIONView Profile

Award Issued Date

06/11/2026, 12:00:00 AM UTC

Documents

(1)

SPE4A626D61KP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedApr 14

Combined Synopsis

AwardedJun 11

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Heather Spadaro

contact@example.gov

Full Description

Show more

DLA award SPE4A626D61KP posted on DIBBS. Awardee: IMMECOR CORPORATION (CAGE 4VAS1) Total Contract Price: $350,000.00 Award Date: 06-11-2026 Solicitation: SPE4A6-26-U-2791 Line items: - CABLE ASSEMBLY, SPEC (NSN/Part 5995016143319, PR 1000231142)

Similar Contracts

Same NAICS industry code

Supply of Special Cable Assemblies (NSN 6150014428441)

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

59--TERMINAL,LUG

Solicitation # SPE4A7-26-T-733G

Solicitation SPE4A7-26-T-733G is a Request for Quotations issued by DLA Aviation for the procurement of four terminal lugs under NSN 5940015204829. This procurement is designated as a Total Small Business Set-Aside under NAICS code 335931. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery window of 92 days and a need ship date of December 20, 2026. The contract requires strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and provide disclosure for any non-domestic materials used. Payment will be processed electronically through the Wide Area WorkFlow system. Approved sources for this item include 04808 4D96182G01 and 04808 4D99664 Item 18.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

58--RECEIVER-TRANSMITTE - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RDA26

This solicitation, issued by Navsup Weapon Systems Support, seeks a contractor to perform the repair, overhaul, testing, and inspection of various components, including centrifugal pump units, computer subassemblies, and radomes, to return them to a Ready For Issue condition. The work is to be performed by the Raytheon Company at their facility in El Segundo, California. The contract establishes strict requirements for Repair Turnaround Time, with assets being tracked via the Commercial Asset Visibility system, and includes specific protocols for handling items determined to be Beyond Economical Repair or Missing on Induction. The contractor is responsible for providing all necessary labor, materials, and tooling, with a strict prohibition on the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. Quality assurance is mandated through compliance with ISO 9001 and SAE AS9100 standards, and any part cannibalization requires specific approval from NAVSUP WSS. The procurement process includes multiple amendments to adjust line item quantities and extend the response deadline to November 3, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in about 1 month

CABLE ASSEMBLY,SPEC — 5995017138123 — N0038326RBA89

Solicitation # N0038326RBA89

This solicitation, numbered N0038326RBA89 and issued by the Navsup Weapon Systems Support under the Department of Defense, is a request for proposals for a spares requirement specifically concerning cable assemblies. The procurement falls under NAICS code 335931 and is managed by the office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of October 13, 2026. The contract includes specific requirements for item unique identification and valuation, as well as higher-level quality standards for inspection and acceptance. Supplies are subject to a warranty period of 365 days, beginning 45 days after the final delivery. Payments will be processed via the Wide Area Workflow system using a combined invoice and receiving report. Primary coordination for this effort is handled by Grace V. McGinley.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

CABLE ASSEMBLY,SPEC — 5995016895462 — N0038326QQB38

Solicitation # N0038326QQB38

This solicitation, numbered N0038326QQB38, is issued by the Department of Defense under the Navsup Weapon Systems Support agency for the procurement of specific cable assemblies. The acquisition falls under NAICS code 335931, with a small business size standard of 600 employees. The solicitation was posted on September 11, 2026, and requires responses by October 13, 2026. The contract includes a one-year warranty for noncomplex supplies starting from the date of delivery, with a 45-day window for reporting defects. Administrative requirements specify the use of Wide Area Workflow for combined invoice and receiving reports and mandate compliance with Buy American and Free Trade Agreements. Primary contact for this effort is Deja S. Thompson-Mitchell, based out of the Philadelphia, Pennsylvania office.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Supply of Electrical Plug Connectors (NSN 5935-01-169-4141)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-643-5241)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Electrical Plug Connectors (NSN 5935-01-460-6158)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Electrical Contact Brushes (NSN 5977-01-289-4657)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Branched Wiring Harness Fabrication

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Cartridge Fuse Supplier

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electrical Backshell Manufacturer

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS