Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPECIAL

Active
SPE4A6-26-T-06FSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a special-purpose electrical cable assembly with part number 180.01.0054 and NSN 6150-12-324-0183, with a quantity of five units to be delivered FOB origin within 171 days, targeting a delivery date of July 1, 2027. The product must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede all other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, including palletization per specified protocols. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contract is subject to Covered Defense Information protocols under RD002. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling per MIL-STD-1916 or equivalent zero-based plans, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The contract was issued under solicitation SPE4A6-26-T-06FS as a total small business set-aside under NAICS code 334419, with a response deadline of July 22, 2026, and was posted on July 14, 2026. Delivery is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, using the designated parcel post and freight addresses, with no variance allowed in quantity. The unit of issue is each, with a total price based on a per-unit price specified in the contract line item. All items must be marked and labeled in accordance with military standards, and the manufacturer must adhere to DLA’s unit of issue guidelines referenced in the official DLA documentation. The point of contact for the contract is Chinh Le of the ASC Commodities Division, Department of Defense.

General Info

Five 180.01.0054 cables, FOB origin, due July 1, 2027, CMMC Level 2, MIL-STD compliant, small business set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A6-26-T-06FS DLA Aviation Jul 15 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHINH LE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
VINCORION POWER SYSTEMS GMBH D0857 P/N 180.01.0054
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-06FS
SECTION B
PR: 7017487676 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487676 0001 EA 5.000
NSN/MATERIAL:6150123240183
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:07/01/2027
SPE4A6-26-T-06FS NSN/Part Number: 6150-12-324-0183 Quantity: 5 EA Purchase Request: 7017487676QTY: 5 Delivery: 171 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract is for the procurement of two special-purpose electrical cable assemblies identified by NSN 6150-01-265-0887, with a delivery requirement of 171 days after contract award. The solicitation number is SPE4A6-26-T-05ZM and is designated as a total small business set-aside under FAR 19.5, with a NAICS code of 334419. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and requires compliance with DLA packaging standards. Quality assurance is governed by MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stated. Inspection and acceptance must occur at the manufacturer’s origin under RQ009, and the supplier must comply with ISO 9001:2015 quality management requirements regardless of manufacturing status. The technical data associated with this cable assembly is subject to export control under either ITAR or EAR, restricting any disclosure to foreign persons, including employees of U.S. companies or their foreign subsidiaries, within or outside the United States. DFARS 252.225-7048 applies, and access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and official DLA authorization. The Defense Logistics Agency further mandates the removal of government identification from non-accepted supplies and imposes strict handling protocols to prevent unauthorized dissemination. The contract is managed by the ASC Commodities Division under the Department of Defense, with performance location at Hill AFB, Utah, and primary point of contact Traci Beaudoin at traci.beaudoin@dla.mil. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
KIT, REFILL, DEHYDRATThe contract is for the procurement of 23 units of a KIT, REFILL, DEHYDRAT with NSN 4920-01-504-3678 and part number 5119-008005, supplied by AEROCONTROLEX GROUP, INC. Delivery is scheduled for 171 days after award, with FOB origin terms and inspection and acceptance to occur at the destination facility in New Cumberland, Pennsylvania. The items must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including proper marking, barcoding, and inclusion of a detailed contents list for each kit. Each kit must be contained in a single box with adequate cushioning to prevent damage and movement of components, and palletization must follow DLA packaging standards. The contract prohibits any quantity variance and mandates zero non-conformances under sampling protocols governed by MIL-STD-1916 or equivalent zero-based plans, with verification levels assigned per critical, major, and minor attributes. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, and configuration changes require formal engineering change proposals. The supplier must comply with CMMC Level 2 cybersecurity self-assessment requirements and remove all government identification from rejected items. Packaging and documentation procedures must adhere to DLA-specific instructions, and shipment must follow DLAD procedural notes C19 and C20 for transportation and first destination logistics. The required delivery date is June 25, 2027, with a needed ship date of January 10, 2027.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThis contract pertains to the procurement of a Light, Indicator component identified by NSN 6210-00-542-6393 and part number MS25041-2, with a total quantity of 322 units to be delivered within 366 days under solicitation SPE4A6-26-T-05VS. The item is classified as a commercial item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including MIL-DTL-7961E and MS25041H specifications. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes must meet verification levels VII or AQL 0.1. The contractor is required to perform first article testing on one unit, verified in-plant by the DSMC-QAR, and must submit supporting documentation adhering to MIL-HDBK-831 guidelines. Mercury and mercury-containing compounds are strictly prohibited except in specific exempted applications such as fluorescent lamps or sensors, which must include secondary containment per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129 with the special fragile code 01-01, and palletization follows DLA packaging standards. All items are to be delivered FOB origin, with inspection and acceptance occurring at the manufacturer’s site. A separate line item exists for the first article test, priced at $1.00, but no separate charge is assumed if not cited, and this line will be voided if the test is waived. The delivery destination is DLA Distribution Cherry Point in North Carolina, with a required ship date of March 26, 2027.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
Electronic Parts Kit Manufacturing and AssemblyThe contract requires the manufacture, assembly, and delivery of a complete electronic equipment parts kit identified by NSN 5999-01-624-0565, encompassing end-to-end responsibilities including sourcing all necessary components, ensuring rigorous quality assurance protocols, and adhering to strict Department of Defense technical and labeling standards. The work must comply fully with DLA specifications for packaging and documentation, with the final product destined for performance at Suffolk, Virginia, zip code 23435-5000. This is a subcontract opportunity under NAICS code 334419, issued by the Maritime Supply Chain ESOC Buys office within the Department of Defense, with responses due by July 27, 2026, following a posting date of July 14, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe contract pertains to the procurement of a single push switch with NSN 5930-01-311-7287 under solicitation SPE7M8-26-T-5396, requiring delivery within 20 days of award. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size, and any amendments superseding prior versions. The use of Class I ozone-depleting substances is strictly prohibited in design, manufacturing, or cleaning processes unless explicitly approved in writing by the contracting officer, and this prohibition supersedes any conflicting specification but does not reduce performance expectations. Mercury or mercury-containing compounds are banned from direct contact with the hardware except for functional applications in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per SPE7M8-26-T-5396 and NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical data referenced is incomplete, requiring the supplier to ensure full compliance with both cited specifications and the part-numbered item. The solicitation requires complete data packages for both approved and alternate parts, with no existing data provided, and the primary point of contact is Dondiego Boler at the Department of Defense’s Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details