Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPECIAL

Active
SPE4A6-26-Q-1281Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for a single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-496-5544, with a delivery deadline of 220 days after contract award. The technical and quality requirements governing this item are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The assembly must comply with DLA packaging standards, require removal of government identification from non-accepted supplies, and be physically marked per specified identification protocols. Components within the assembly must be sourced from qualified manufacturers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and procurement must adhere to the referenced procurement note H02. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Zero non-conformances are required unless otherwise stated, and manufacturers may choose either attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 is applicable. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and prior authorization from DLA. The solicitation was issued on August 5, 2026, with responses due by August 20, 2026, under solicitation number SPE4A6-26-Q-1281, managed by the Department of Defense’s ASC Commodities Division, and point of contact is Marcita Robinson.

General Info

Single NSN 6150-01-496-5544 cable assembly, 220-day delivery, ITAR-controlled, zero non-conformances, qualified components, MIL-STD-1916 inspection.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-Q-1281

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Marcita Robinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY, SPECIAL PURPOSE ELECTRICAL RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-496-5544 Quantity: 1 EA Purchase Request: 7016869797QTY: 1 Delivery: 220 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
RETAINER, ELECTRICAL
Solicitation # SPE7M5-26-Q-0839
The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-Q-1282
The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-12UK
The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12SN
The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-Q-0722
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 and part number MS21004-4, with a total quantity of 684 packing groups, each equivalent to 100 units, for a total of 68,400 individual terminals. The item is designated as a commercial item and is subject to qualification through the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by SAE AS21004F Revision F dated 12/01/2023 and SAE AS7928 Revision C dated 05/01/2019, with configuration changes requiring formal Engineering Change Proposal requests. The product must be free from intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents, and all exempt items must meet stringent containment and shock-proofing standards per NAVSEA 5100-003D. Delivery is set for 167 days after contract award, with FOB origin and inspection and acceptance points at destination. Pricing is firm fixed, with zero tolerance for quantity variance. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, including use of approved materials, methods, and marking in accordance with MIL-STD-129 and ISO/IEC 16388 barcoding standards. The item is classified as critical application and subject to covered defense information protocols. The contract specifies the DLA distribution facility in New Cumberland, Pennsylvania, as the delivery point and includes detailed transportation protocols under DLAD Proc Notes C19 and C20. The solicitation, issued by the Department of Defense’s Nuclear Reactor Program, was posted on August 5, 2026, with responses due by August 12, 2026, and the material is required for delivery no later than April 6, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-368G
The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7LX-26-U-9315
The contract is for a Battery Power Supply identified by NSN 6130-01-609-5744 and part number OFM-2060-A1, with a quantity of 40 units issued as individual items (EA). It is classified as a commercial item and designated as a critical application item, requiring strict compliance with DLA packaging and quality standards. All procurement must adhere to MIL-STD-2073-1E for packaging, including preservation method 41, and marking must follow MIL-STD-129 with no special marking requirements. The item must be delivered FOB origin within 127 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Sampling and quality verification must comply with MIL-STD-1916 or an equivalent zero-based plan, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise specified. The contract is under DLA Direct, CONUS coverage and is issued under solicitation SPE7LX-26-U-9315 with a response deadline of August 20, 2026, and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
Federal
HEX RECT ASSY
Solicitation # SPRMM126QKG70
This contract pertains to the procurement of a HEX RECT ASSY under emergency acquisition authority, with all contractual documents considered issued upon electronic transmission or mail delivery. The item must be manufactured to exact specifications defined by MIL-STD-130 for marking and MIL-I-45208 for quality inspection, with ISO 9001 certification accepted as an alternative. The contractor must be the original equipment manufacturer or an authorized distributor, with clear identification of the OEM via CAGE code and part number; refurbished materials are strictly prohibited. All items must be mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and a warning plate. Inspection is required at the source, and the supplier must maintain a government-acceptable quality system, with records retained for four years post-delivery. Packaging must comply with MIL-STD-2073, and no changes to design, material, or production site are permitted without formal written approval and a $250 administrative cost reduction. The contract mandates use of WAWF for invoice and receiving report submission, and compliance with CMMC Level 1 cybersecurity self-assessment. Award will be granted based on the Lowest Price Technically Acceptable method, with all proposals subject to strict technical compliance. The contractor must provide an email for communication and is strongly encouraged to register for EDA via PIEE to receive automated notifications of contract actions. The solicitation prohibits distribution of Navy-provided documents without proper Distribution Statement compliance, with specific controls for NoFORN and Export Controlled data. Small business representation is required under NAICS code 335931, and additional deviations apply for annual certifications and cybersecurity. Deliveries must align with specified timelines, and failure to disclose exceptions in EDI submissions will result in award based solely on solicitation terms. Any post-award changes will incur cost deductions. The procurement is managed by DLA Mechanicsburg, and all vendor interactions must conform to the detailed quality, traceability, and security protocols outlined throughout the contract.
SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in 3 months
View Details
NAICS: 335931
New
Federal
61--POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPB79
The contract pertains to the repair or modification of a power supply under solicitation number N0038326QPB79, issued by the Naval Supply Systems Command Weapon Systems Support office in Philadelphia, Pennsylvania. The opportunity is open for response until August 24, 2026, and is classified under NAICS code 335931, indicating it relates to electrical equipment manufacturing. Key contractual clauses include mandatory use of Workflow Pro Assist Module for payment processing, compliance with the Buy American Act and related free trade agreements, and adherence to security prohibitions and equal opportunity requirements for workers with disabilities. Warranty provisions mandate a 12-month coverage period with a 60-day window following defect discovery for claims. Inspection and acceptance procedures are strictly defined, and the use of Wide Area Workflow for invoice and receiving report submission is required. The contract also enforces mandatory national defense priority ratings and prohibits certain classified or restricted information disclosures under Department of Defense deviations. The point of contact for this solicitation is Jason J. Sklencar, reachable via email at jason.j.sklencar.civ@us.navy.mil and phone at 771-229-0565, with supplemental contact information listed as 215-697-4179. Payment and documentation must comply with Navy-specific financial protocols, including the use of invoice and receiving report combos as directed in the Schedule. Compliance with the Alternate A annual representations and certifications is required, and royalty obligations are governed by longstanding provisions. The contract applies to all noncomplex supplies with specific valuation and identification requirements, and all offerors must ensure alignment with the Navy’s AbilityOne support contractor policy and the full suite of federal acquisition regulations governing national defense procurement. No place of performance details are specified beyond the issuing office’s location.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in 21 minutes
View Details
NAICS: 335931
New
Federal
CABLE ASSEMBLY
Solicitation # N0010426QEC99
The contract pertains to the procurement of a cable assembly under solicitation N0010426QEC99, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of September 4, 2026. It invokes a comprehensive set of technical, quality, and administrative requirements, including mandatory compliance with the Individual Repair Part Ordering Data (IRPOD) available on the BPMI site, which serves as the primary reference for technical specifications, drawings, and standards. The contract enforces strict order of precedence for document conflicts, with amendments and the schedule taking priority over specifications and referenced standards. Contractors must adhere to the exact revision levels of cited documents unless written approval is obtained for deviations, and any non-conformance must be declared in advance with technical justification and supporting data. Packaging must meet MIL-PRF-23199 and MIL-STD-2073 standards, with cleanliness controls applied per MIL-STD-767 and MIL-STD-2041, though fire retardant materials are no longer required. The use of mercury or mercury compounds is strictly prohibited. Quality assurance is governed by the IRPOD, requiring contractors to maintain inspection records accessible to the government throughout and after performance. All contractual documents are considered issued upon electronic transmission, and pricing is valid for 60 days post-closing unless otherwise stated. The contract mandates use of Wide Area Workflow for invoice and receiving report submissions and requires compliance with cybersecurity maturity certification, veteran and disability equal opportunity provisions, small business representations, and security prohibitions. Data deliverables must follow DD Form 1423 formats with specified distribution statements, submission frequencies, and approval codes, and a Certificate of Compliance per DI-MISC-81356 must be submitted with each delivery. The NAICS code 335931 classifies this procurement under other electrical equipment and component manufacturing, and the point of contact is designated for technical inquiries.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
International
Procurement of CABLE ASSEMBLY, POWER, ELECTRICAL
Solicitation # W8486-270955/A
The Department of National Defence is seeking proposals for 400 power electrical cable assemblies, identified by GSIN 6150 and NSN 6150-01-022-6004, with part number 11682336-1 or an acceptable equivalent, manufactured by NCAGE 19207. Each of the 200 units is to be delivered to either 25 CFSD Montreal at 6363 Rue Notre Dame St E, Montreal, QC H1N 2E9, or 7 CFSD Edmonton at 195 Ave & 82nd St, Building 236, Edmonton, Alberta T5J 4J5. Offerors must explicitly provide the part number and manufacturer NCAGE, and if proposing an equivalent or substitute product, must specify the brand name, model, part number, and NCAGE of the alternative. This procurement is conditionally reserved for Aboriginal businesses under the federal government’s Procurement Strategy for Aboriginal Business, and interested parties must comply with the requirements outlined in Annex 9.4 of the PWGSC Supply Manual. The solicitation, numbered W8486-270955/A, was posted on August 5, 2026, with a response deadline of September 3, 2026, and all submissions must be received by 8:00 PM Eastern Time. The Crown reserves the right to negotiate with any supplier, and documents may be submitted in either English or French. Primary contact for inquiries is Emma Wood, Contracting Authority, reachable via email at emma.wood@forces.gc.ca or phone at 343-616-1706.
Department of National Defence

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335931
New
SLED
Expose/Conceal Harness Supply
Utah

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details