Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CABLE ASSEMBLY, SPECIAL

Active
SPE4A0-27-T-0422Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A0-27-T-0422 is a request for quotations issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of three special purpose electrical branched cable assemblies, identified by NSN 6150017082589. The requirement consists of three separate line items, each for a quantity of one unit. The items are to be delivered to the 0024 QM CO Composite Supply at Joint Base Lewis McChord, Washington, with an original required delivery date of October 22, 2026. Delivery is required within five days after receipt of order, shipped via the fastest traceable means, and is established as FOB Origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, the Hazard Communication Standard for hazardous materials, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Richmond, Virginia.

General Info

DLA request for quotations for three special purpose electrical branched cable assemblies.

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

BLDG 9640 S L STREET BAY F, JOINT BASE LEWIS MCCH, WA, 98433-5000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseSolicitation
Posted

Solicitation

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
DRS NETWORK & IMAGING SYSTEMS, LLC 1RWE7 P/N 176697-6
ACE ELECTRONICS DEFENSE SYSTEMS, LLC 5TWH2 P/N 176697-6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-27-T-0422
SECTION B
PR: 7018838125 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018838125 0001 EA 1.000
NSN/MATERIAL:6150017082589
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) W68PPA62880237
SPE4A0-27-T-0422
SECTION B
PR: 7018838125 PRLI: 0001 CONT’D
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:10/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018838124 0001 EA 1.000
NSN/MATERIAL:6150017082589
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:E5 OPI:M INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
SPE4A0-27-T-0422
SECTION B
PR: 7018838124 PRLI: 0001 CONT’D
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) W68PPA62880236
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:10/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7018838126 0001 EA 1.000
NSN/MATERIAL:6150017082589
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A0-27-T-0422
SECTION B
PR: 7018838126 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:E5 OPI:M INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:E5 OPI:M INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
SPE4A0-27-T-0422
SECTION B
PR: 7018838126 PRLI: 0001 CONT’D
W68PPA
0024 QM CO COMPOSITE SUPPL
AWCF SSF
BLDG 9640 S L STREET BAY F
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) W68PPA62880238
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:10/22/2026
SPE4A0-27-T-0422 NSN/Part Number: 6150-01-708-2589 Quantity: 1 EA Purchase Request: 7018838124QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
Federal
3-phase, 115-12.47-kv TransformerThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the procurement of a 3-phase, 115-12.47-kv Transformer. This requirement is categorized under NAICS code 335311 and was posted on November 1, 2026. G & RK Consulting Associates LLC is listed as the incumbent contractor for this effort. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information. Additional details regarding this acquisition can be found through the official Department of Energy public acquisition forecast.
Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
Federal
230-KV 40MVAR 3-PHASE BANK 100 AMP SHUNT REACTOR WITH AIR CORE SUPPORT STRUCTURE FOR CIRCLE SUBSTATIONThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of a 230-KV 40MVAR 3-phase bank 100 amp shunt reactor. This project includes the provision of an air core support structure specifically for the Circle Substation. The requirement is categorized under NAICS code 335311, which pertains to the manufacture of power transformers. The forecast was posted on November 1, 2026, and identifies Coal Creek Construction, Inc. as the incumbent contractor. Interested parties may coordinate with the Small Business Program Managers, Tetrault or Teves, for further information regarding this acquisition.
Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
Federal
Headgate Rock Substation Load Tap Changer Retro-fit Project in support of Western Area Power Administration Desert Southwest Region.The Western Area Power Administration, under the Department of Energy, is forecasting a project for the Headgate Rock Substation Load Tap Changer Retro-fit within the Desert Southwest Region. This project will be performed in Arizona and falls under NAICS code 335311. The opportunity is designated as a small business set-aside. Reinhausen Inc. is listed as the incumbent contractor for this effort. Interested parties may coordinate with the Small Business Program Managers for further information.
Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 335311
New
International
University of Lethbridge - Request for Quotes - Pad Mounted Transformer
Solicitation # AB-2026-07231
The University of Lethbridge is seeking quotations for the procurement of one 1,000 kVA, three-phase, outdoor, mineral-oil-filled, dead-front, pad-mounted distribution transformer. The required unit must include an integral primary load-break disconnect switch, external visible-break arrangement, primary and secondary terminations, surge arresters, grounding provisions, gauges, and all necessary accessories and associated equipment. This solicitation, identified as AB-2026-07231, was posted on October 30, 2026, with a response deadline of November 16, 2026. The equipment will be utilized in Lethbridge, Alberta. Interested parties must submit their quotes through the Euna Procurement Interactive Portal following the specific submission instructions provided in the portal documentation.
University of Lethbridge

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
SLED
Manufacturing of 15kV Dead-Front Pad-Mounted Air Insulated SwitchgearThis subcontract involves the manufacture and supply of 15kV three-phase pad-mounted, air-insulated, manual dead-front switchgear for prime contractors working on City of Hamilton municipal projects. The scope of work requires the fabrication of 4-600A and 3-600A/1-200A units featuring a 95KV BIL and 600A main bus continuous current. All units must utilize configurations equivalent to Federal Pacific #FPAC-PSE or S&C #PME. The contractor is responsible for the delivery of 12 completed switchgear assemblies FOB to City of Hamilton Substation #5. This procurement falls under NAICS code 335311 and is managed by the City of Hamilton in Ohio. The response deadline for this opportunity is November 13, 2026.
The City of Hamilton

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
RETAINER, BATTERY
Solicitation # SPE7M1-27-U-0845
Solicitation SPE7M1-27-U-0845 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of battery retainers, identified by NSN 6160015971381. This is a total small business set-aside under NAICS code 335311, intended to result in an Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. The estimated quantity is 2,512 units, though actual purchases are subject to the terms of the resulting contract. Delivery is required within 126 days after order, with terms specified as FOB Origin, and all deliveries will be within the continental United States. The contract mandates strict adherence to technical and quality requirements, including TDP Rev B Gen 2 and basic drawing 30554 04-21107. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. Quality assurance involves destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with DFARS regulations regarding the safeguarding of covered defense information, the prohibition of certain telecommunications equipment, and the restriction of mercury compounds in hardware. Payment will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-27-T-4875
Solicitation SPE4A6-27-T-4875, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of one wiring harness, identified by NSN 6150-01-652-3049. The requirement specifies Glenair, Inc. part numbers 5CV0211322 and 743-041-8. Delivery is required at the DLA Distribution DSP New Cumberland Facility in Pennsylvania, with a need ship date of April 6, 2027, and an original required delivery date of October 16, 2027. The contract stipulates FOB Origin terms, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. Quality assurance requires a zero non-conformance acceptance rate in sample lots, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Key compliance requirements include a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, adherence to the Buy American and Balance of Payments Program, and the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-6119
Solicitation SPE4A6-27-T-6119 is a request for quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of six special purpose electrical cable assemblies. The required items are identified by NSN 6150-01-661-0387 and part number 37089000, with approved manufacturers including Elkhart Brass Manufacturing Company and Manufacturers Distributor Inc. Delivery is required by April 10, 2027, with a need ship date of April 20, 2027, shipped FOB Origin to DLA Distribution Barstow in California. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to cybersecurity and packaging standards, including a CMMC Level 2 Self-Assessment and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Packaging and palletization must follow RP001 and MIL-STD-2073-1E, while marking must comply with MIL-STD-129. Invoicing and receiving reports are to be processed electronically through the Wide Area Workflow system. Additionally, the solicitation incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and prohibitions on covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
SLED
Equipment Supply (Vendor Opportunity)This subcontract opportunity involves the manufacture and delivery of specialized industrial-grade electrical hardware for water treatment plant projects managed by the City of San Diego. The selected vendor will be responsible for providing an industrial-grade switchboard, an integrated automatic transfer switch, and a standby generator, ensuring all equipment is delivered directly to the Otay WTP site in Chula Vista. The vendor must adhere to the manufacturer warranties and guarantees specified in Section 9.4 of the agreement. Interested parties must submit their responses by the deadline of December 8, 2026, for this project categorized under NAICS code 335311.
City of San Diego

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
SPRRA227R0703
Solicitation # SPRRA227R0703
The Defense Logistics Agency in Redstone Arsenal, Alabama, is conducting market research to identify qualified manufacturing and supply sources for various components used in the Patriot Missile Weapon System. The required items include one circuit card assembly and several power and special cable assemblies. This effort is a Sources Sought Synopsis intended to determine if future acquisitions can be competitive or set aside for small businesses, including 8(a), HUBZone, and women-owned concerns. Due to specific technical data restrictions and engineering source approvals designated by AMC/AMSC codes 3C, 3P, and 3Q, these items are currently procured from a limited number of responsible sources. Potential contractors are responsible for all recurring and nonrecurring engineering costs associated with becoming a qualified source, as well as managing the entire production process from supply chain logistics to final delivery. This notice is for informational purposes only and does not constitute a formal solicitation or a commitment to award a contract.
Al DLA Aviation At Huntsville

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
Federal
Conconully Transformer (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the Conconully Transformer project. This procurement opportunity is categorized under NAICS code 335311, which pertains to the manufacture of power transformers. The forecast was posted on October 30, 2026, and is managed by Kelli Jasperson, who serves as both the primary point of contact and the Small Business Specialist. Further details regarding the solicitation can be accessed through the Acquisition Gateway.
Bureau of Reclamation

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 335311
New
SLED
BABA-Compliant 115KV Power Transformer ManufacturingThis subcontract involves the manufacture and assembly of one 115/14.4kV power transformer with a capacity of 24/32/40MVA for prime contractors working on City of Tacoma Public Utilities projects. The scope of work includes the fabrication of the core and windings, integration of HV DETC and LV OLTC, and the installation of nitrogen gas oil preservation systems. To ensure quality and performance, the unit must undergo factory acceptance testing in accordance with ANSI, NEMA, and IEEE standards. The selected provider must maintain ISO 9001 certification and ensure full BABA compliance. The final deliverable is one fully tested 115KV power transformer. This opportunity is managed by T&D Engineering in Washington, with a response deadline set for December 8, 2026.
T&D Engineering

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 423830
New
DIBBS
Supplier of Portable Hydraulic Cutter (Enerpac WHC-1250)This subcontract involves the procurement of one Enerpac Tool Group Corp portable hydraulic cutter, part number WHC-1250, which must meet NSN 5130-01-713-9787. The equipment is intended for prime contractors supporting DLA Aviation Supply contracts and must be delivered to Naval Beach Unit Seven located in Sasebo City, Japan. The supplier is required to adhere to strict packaging and marking guidelines per MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the item must comply with quality standards MIL-STD-1916, ASQ H1331, or ASQ Z1.4. This requirement is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333991
New
DIBBS
CUTTER, HYDRAULIC, PORTA
Solicitation # SPE4A0-27-Q-0011
Solicitation SPE4A0-27-Q-0011 is a firm fixed price request for quotation issued by the Defense Logistics Agency for the procurement of one portable hydraulic cutter, identified by NSN 5130-01-713-9787 and manufacturer part number Enerpac Tool Group Corp 26952 P/N WHC-1250. This is an urgent priority emergency retail requirement with a delivery timeline of 7 days after order. The contract is designated as a small business set-aside, and the government will determine the best value based on a comparative assessment of price and non-price factors, with past performance and SPRS assessments weighted most heavily. The item is to be delivered to Naval Beach Unit Seven in Sasebo City, Japan, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Quality assurance and sampling will follow MIL-STD-1916, ASQ H1331, or ASQ Z1.4, requiring zero non-conformances for acceptance. The procurement incorporates various FAR and DFARS clauses, including specific deviations for 2026, and requires offerors to be registered in the System Award Management database.
Power-Driven Handtool Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
DIBBS
Supply of Spring Resiliency TestersThis subcontract involves the procurement and delivery of two specialized spring resiliency testing units for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The required equipment must be NSN 6635005573237, specifically AMETEK, INC. 61349 part numbers D150, D150A, D150AM, or D150M. To ensure quality and authenticity, the provider must be an original equipment manufacturer or an authorized reseller. The contractor is responsible for delivering fully functional testers that include Item Unique Identification marking in accordance with MIL-STD-130. Performance for this contract is centered in Beaufort, South Carolina. Interested parties must adhere to the response deadline of November 6, 2026, as specified in the solicitation.
Other Measuring and Controlling Device Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
Supply of Plain Square Nuts (NSN 5310015670390)This subcontract involves the supply of two plain square nuts meeting the exact technical specifications of NSN 5310015670390 for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced without the use of additive manufacturing processes and must be shipped via the fastest traceable means, excluding parcel post. The contract is issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, with performance taking place in Fort Stewart. Eligible providers must possess a valid UEI and CAGE code. The response deadline for this requirement is November 6, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
Supply of Shouldered Studs (NSN 5307016661011)This subcontract involves the manufacture or sourcing of shouldered studs under NSN 5307016661011 to support prime contractors for the Department of Defense DLA Weapons Support aviation supply chain. The selected provider must possess a valid CAGE code and UEI, ensuring all hardware is packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. The requirement consists of two units to be delivered FOB Origin within five days using the fastest traceable shipping method available, excluding parcel post. Performance for this contract is centered at Fort Campbell, with a response deadline set for November 6, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 325211
New
DIBBS
Supplier of Electrical Insulating Compounds and ComponentsThis subcontract opportunity is for a supplier to provide raw insulating compounds and individual hardware components to prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The selected provider will be responsible for manufacturing or sourcing specific chemical compounds and parts necessary for the assembly of Electrical Insulating Compound Kits, ensuring all items are of domestic origin. To support the prime contractor's contents list, the supplier must provide accurate part numbers and National Stock Numbers for every component delivered, whether supplied in bulk or as individual parts. The project is managed under the Department of Defense for the DLA Weapons Support Aviation Supply Chain ESOC Buys, with performance taking place at Hill AFB. Interested parties must respond by November 6, 2026. The contract falls under NAICS code 325211, focusing on the specialized production of chemical compounds required for aviation supply chain maintenance and assembly.
Plastics Material and Resin Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
Supplier of Electrical Insulating Compound Kits (NSN 5970-00-109-4611)This subcontract involves the supply of one complete Electrical Insulating Compound Kit, identified by NSN 5970-00-109-4611, for the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for providing a fully assembled and packaged kit that includes a detailed contents list of component part numbers, NSNs, and quantities. To ensure product integrity, all contents must be properly cushioned to prevent movement or damage during transit. A critical requirement of this agreement is that all supplied materials must be of domestic origin. The performance of this contract is centered at Hill AFB, zip code 84056-5733. Interested parties must adhere to the response deadline of November 6, 2026, as specified in the solicitation posted on October 29, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
Door Closer Supply (NSN 5342-01-692-3255)This subcontract involves the procurement or manufacture of one door closer unit, identified by NSN 5342-01-692-3255, for prime contractors supporting DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Aviation Supply Chain ESOC Buys, requires the item to be free of mercury compounds in accordance with IP056. All deliverables must adhere to RA001 DLA Master List quality requirements and follow specific packaging and marking standards outlined in MIL-STD-2073-1E, MIL-STD-129, and RP001. The completed hardware component must be delivered FOB Destination to Yokosuka, Japan. This opportunity falls under NAICS code 332510, with a response deadline set for November 6, 2026.
Hardware Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
Supplier of Straight Headed Pins (MS9844-27)This subcontract involves the supply of specialized straight, headed pins to support prime contractors for the Department of Defense, specifically under the DLA Weapons Support aviation supply chain. The supplier is required to manufacture or source pins that strictly adhere to Part Number MS9844-27 and NSN 5315014436573. The total delivery requirement consists of 1,000 pounds, equivalent to 100 pieces. To comply with the contract, the provider must submit their entity name, UEI, and CAGE code, while disclosing any covered defense telecommunications equipment utilized during production. The opportunity is categorized under NAICS code 332722 and was posted on October 29, 2026, with a response deadline of November 6, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
Supply of Sleeve Bearings (NSN 3120-01-618-0772)This subcontract, issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, requires the manufacture or procurement of 50 sleeve bearings meeting NSN 3120-01-618-0772 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 333241. The final products must be delivered to SRF and JRMC in Yokosuka, Japan. Strict adherence to technical and safety standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and hazard labeling according to 29 CFR 1910.1200. Additionally, the provider must comply with the DLA Master List of Technical and Quality Requirements RA001. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026.
Food Product Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 423430
New
DIBBS
Supply of Transmitter Subassembly (NSN 5895-01-655-6373)This subcontract involves the procurement and delivery of one Transmitter Subassembly, part number NSN 5895-01-655-6373, manufactured by Setra Systems, Inc. The hardware is intended for prime contractors supporting DLA Weapons Support Aviation Supply Chain projects and must be delivered FOB Origin to SUPSHIP Bath. All items must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA RP001. To ensure quality and security, the contractor is required to provide OEM authorization for full traceability and maintain cybersecurity compliance in accordance with NIST SP 800-171. The project falls under NAICS code 423430 and is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys agency.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging, marking, and labeling for high-precision aviation components supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The contractor is responsible for ensuring all materials are packaged according to ASTM D3951 and RP001 standards, with marking and labeling performed in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. Operating under NAICS code 488510, the service provider must utilize MIL-STD-129 compliant equipment to deliver components that are bolt ready for shipment. The place of performance for these services is located in Webster, New York. Interested parties should note the response deadline of November 6, 2026.
Freight Transportation Arrangement

POSTED

3 days ago

DEADLINE

in 5 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS