Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CABLE ASSEMBLY, SPECIAL

Open
SPE4A6-27-U-0224Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-U-0224 is an indefinite-delivery contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of one special purpose electrical cable assembly (NSN 6150-01-701-0337). This is a total small business set-aside under NAICS 335311, with a delivery requirement of 84 days after order (ADO) and terms established as FOB Origin. The contract is not binding until a delivery order is placed, with a maximum contract value of 350,000 dollars. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance, and follow MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance occur at the origin using zero-based sampling plans. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring approved JCP certification. Additionally, the contractor must comply with CMMC Level 2 requirements and safeguard covered defense information per DFARS 252.204-7012. All payments and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

General Info

Small business contract for special electrical cable assemblies with a $350,000 limit.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

USA

Set-Aside

SBA

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Heather Spadaro
Sign up to see this detail

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY,SPEC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-701-0337 Quantity: 1 EA Purchase Request: 1000248467QTY: 1 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
Manufacture of Elevation Stow Turret SwitchesThis subcontract, issued by the DLA Weapons Support Strategic Acquisition Program Directorate, requires the manufacture of 63 Elevation Stow Turret Switches. The fabrication must strictly adhere to Reference Drawing NR 19200 135B6152 (Rev N) and TDP Rev A Gen 1. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 335311. The contractor must maintain rigorous quality and security standards, including SAE AS9003 or ISO 9001 inspection systems and CMMC Level 2 or NIST SP 800-171 compliance. Additionally, the provider must be DDTC registered and fully compliant with ITAR and EAR regulations. Responses are due by November 27, 2026.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
DIBBS
Switch Assembly Manufacturer/SupplierThis subcontract involves the manufacture and supply of ten Switch Assembly units, identified by NSN 5930013674274, for prime contractors supporting the DLA Weapons Support Electrical Devices Division. The supplier is responsible for ensuring all units meet strict technical specifications and undergo thorough quality inspections before delivery to the DLA Distribution DDSP New Cumberland Facility. Compliance is mandatory across several regulatory and technical standards, including RP001 for packaging, MIL-STD-129 for marking, and NIST SP 800-171 for cybersecurity. The project falls under NAICS code 335311 and is managed under the Department of Defense.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
Power Transformer Manufacturing and SupplyThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain for the Department of Defense, involves the manufacture and supply of 12 power transformers with a 10 KVA capacity. The units must be produced in accordance with Basic Drawing NR 16236 RE-000580650, Revision NR DTD 12/07/2023, and must meet Group 3, Division B specifications. The project adheres to Commercial Off-The-Shelf and Critical Application Item standards, with performance taking place in Jacksonville, Florida. The contract is designated as a Total Small Business Set-Aside under NAICS code 335311. Key compliance requirements include adherence to Buy American regulations and the capacity to manage unclassified controlled technical information. Interested parties must respond by November 25, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A0-27-T-0599
Solicitation SPE4A0-27-T-0599 is a federal procurement issued by the DLA Weapons Support Aviation Supply Chain for one special purpose electrical cable assembly, identified by NSN 6150-01-666-4298. The procurement requires strict adherence to several technical drawings, including basic drawing 19207 12489356 and multiple reference drawings. Delivery is required by November 5, 2026, to Joint Base Elmendorf Richardson in Alaska, with destination inspection required under FAR 52.246-1. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to coil the assembly to approximately 8 x 8 x 1. This contract contains significant regulatory requirements, including export controls under ITAR and EAR, necessitating that contractors hold an approved US/Canada Joint Certification Program certification. Cybersecurity compliance is mandatory via DFARS 252.204-7012 and CMMC Level 2 certification. The solicitation emphasizes domestic material restrictions, including the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the submission of quotes via the DIBBS portal. Quality assurance is governed by a zero-non-conformance acceptance requirement using MIL-STD-105/ASQ Z1.4 or MIL-STD-1916 sampling plans.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-27-T-2627
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-U-0219
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-27-T-062F
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIRE D
Solicitation # SPE8E8-27-T-0705
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-27-T-058W
Solicitation SPE4A6-27-T-058W, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of two special purpose electrical cable assemblies (NSN 6150-01-702-6107). The items must be manufactured in accordance with Basic Drawing NR 53711 8667974, Revision C, dated April 29, 2022. Delivery is required by March 27, 2026, with the place of performance and delivery located at Port Hueneme, California. Inspection and acceptance are designated as destination-based, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical data is subject to strict distribution limits, requiring US/Canada Joint Certification Program certification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Administrative requirements mandate the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding the Berry Amendment, Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
SLED
Medium Voltage Switchgear Manufacturing & SupplyThis subcontract involves the manufacture and supply of solid-dielectric medium voltage switchgear for prime contractors working on City of Seattle projects. The scope of work requires the production of switchgear units utilizing solid-dielectric insulation materials and medium voltage electrical components, ensuring all products are merchantable and strictly adhere to provided technical specifications. Deliverables include the completed switchgear units accompanied by necessary instruction manuals and packing slips. Additionally, the supplier must provide mandatory Material Safety Data Sheets for all materials used. This procurement is managed by FAS Purchasing in Washington, with a response deadline set for January 14, 2027.
FAS - Purchasing

POSTED

about 8 hours ago

DEADLINE

in 2 months
View Details
NAICS: 335311
New
Federal
Switchgear Transformer Replacement
Solicitation # W50S7X27Q0001
Solicitation W50S7X27Q0001 is a 100% small business set-aside request for quotation from the 184 Wing, Kansas Air National Guard, for the procurement and installation of a control power transformer and associated fuses at McConnell Air Force Base, Kansas. The requirement includes one 112.5 kVA dry-type control power transformer and three 20 Amp current-limiting power fuses for the Building 16 indoor switchgear. The contractor is responsible for the complete scope of work, including removal of the existing unit, rigging, reconnection, coordination of electrical shutdowns, and final commissioning, which must include NETA testing. The equipment must fit the existing switchgear enclosure dimensions of 33 inches wide by 90 inches high by 54 inches deep and utilize a stubs up termination configuration to avoid modifications to the concrete pad or equipment. The government will award a single firm-fixed price contract to the lowest price responsible offeror that meets the technical requirements. Evaluation is based equally on price and technical capability, with the technical factor assessed via a maximum two-page capability statement and evidence that the proposed equipment meets or exceeds all salient characteristics, such as the 50 kA maximum interrupting rating and 60 Hz frequency. Delivery and installation must be completed within 90 days of the award. Quotes are due by November 16, 2026, and must be submitted electronically to the contracting office. Offerors must be registered in the System for Award Management and provide a quote acceptance period of at least 60 days.
W7M9 Uspfo Activity Ksang 184

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
International
DC Distribution Box and Switchgear SupplyThis subcontract involves the supply of IP65-rated DC distribution boxes for prime contractors working on UNOPS solar energy projects located in Koboko, Uganda. The scope of work requires the assembly of wall-mount enclosures equipped with 250A/pole DC busbars, 200A 2P DC MCCBs, 100A 2P DC main switches, and bipolar fused switches utilizing HRC DC fuses. All components must adhere to IEC 60947-2 and IEC 60947-3 standards. The contractor is responsible for providing fully assembled Battery DC Distribution Boxes, which must include all necessary internal wiring, DIN rails, and appropriate labeling. This technical procurement ensures that the switchgear and distribution systems meet specific industrial safety and performance requirements for solar energy infrastructure.
UNOPS

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561910
New
DIBBS
Defense-Compliant Packaging and Marking ProviderThis subcontract involves providing defense-compliant packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires the supplier to provide all necessary packaging materials and perform packing and marking in strict accordance with ASTM D3951 and RP001 standards. Additionally, all items must be labeled and marked following MIL-STD-129 and MIL-STD-130N guidelines using MIL-SPEC materials and specialized UID and barcoding equipment. The specific deliverable for this contract is the packaging, labeling, and preparation of 970 shear bolts for FOB Destination shipment. The final delivery point is DLA Distribution in Jacksonville, Florida. This opportunity falls under NAICS code 561910 and is managed through the DLA Weapons Support ASC.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Critical Application Shear Bolts (NSN 5306-01-289-7104)This subcontract involves the manufacture of 970 critical application shear bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The hardware must be produced using precision machining in accordance with NAS6703 through NAS6720 or NAS4003 standards, with a strict prohibition on the use of additive manufacturing. All materials used in production must comply with the Berry Amendment and the Buy American Act. To be eligible, manufacturers must maintain SAE AS9003 or ISO 9001 quality systems and ensure full cybersecurity compliance with NIST SP 800-171. The project is categorized under NAICS code 332722, with the place of performance located in Jacksonville. The final deliverable consists of 970 finished shear bolts meeting all specified technical and regulatory requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305009509792)This subcontract involves the supply of 5,000 specialized hexagon head cap screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The required items are identified by NSN 5305009509792 and Part Number MS35308-375, and must be manufactured or sourced in strict accordance with NASM35308 Revision 2 and FF-S-85F(3) Revision F. The contractor is responsible for ensuring quality through sampling per MIL-STD-1916 or ASQ H1331, while adhering to MIL-STD-129 and MIL-STD-2073-1E for marking and packaging. All deliverables must comply with DFARS 252.225-7001 and be delivered to Tobyhanna, Pennsylvania. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Export PreparationThis subcontract involves providing specialized packaging, marking, and palletization services for the DLA Weapons Support ASC Commodities Division. The scope of work requires the processing of 28 sleeve bushings intended for export to Israel, ensuring all components are handled according to MIL-STD-2073-1E and MIL-STD-129 standards. Technical requirements specify the use of palletization requirement RP001 along with precise preservation methods, including Pres MTHD:33, CLNG/DRY:1, PRESV MAT:49, and WRAP MAT:GB. The project falls under NAICS code 488510 and is managed under the Department of Defense.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Sleeve Bushings (NSN 3120-00-728-1218)This subcontract involves the manufacture of 28 sleeve bushings under NSN 3120-00-728-1218 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining to meet specific technical standards, with a strict prohibition on the use of additive manufacturing. All finished bushings must be inspected at the origin prior to delivery. To be eligible, contractors must maintain ISO 9001:2015 or SAE AS9100 quality systems and hold JCP certification to ensure authorized access to ITAR and EAR data. Additionally, the provider must demonstrate CMMC Level 2 compliance. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.
Machine Shops

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Military-Spec Packaging and ShippingThis subcontract involves providing specialized military packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, utilizing approved MIL-SPEC preservation, cushioning, and wrapping materials. All electronic invoicing and shipping documentation must be processed through the Wide Area Workflow system. The final deliverables consist of properly prepared shipments delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and was posted on November 12, 2026, with a response deadline of November 20, 2026.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Aerospace-Grade Fastener Material SupplyThis subcontract for Aerospace-Grade Fastener Material Supply involves providing raw material bar stock or wire to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the delivery of certified high-strength or specialty alloy steel, titanium, or nickel that strictly adheres to the metallurgical and chemical specifications detailed in Drawing 53711 8747922. To ensure quality and security, the supplier must provide full material traceability and Mill Test Reports for all shipments. Additionally, the contractor is required to maintain strict compliance with ITAR and EAR export controls. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Screw ManufacturingThis subcontract involves the precision CNC machining and manufacture of six specialized machine screws for the DLA Weapons Support ASC Commodities Division. The components must strictly conform to Basic Drawing 53711 8747922, Revision C and Part Piece Number 741-8747922-189, identified by NSN 5305-01-733-0630. Performance of the work will take place in New Cumberland. To be eligible, the manufacturer must hold either SAE AS9003 or ISO 9001 quality certification. Additionally, due to ITAR and EAR controls, an approved US/Canada Joint Certification Program certification is required. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Close Tolerance Bolt Manufacturing and SupplyThis subcontract through the Department of Defense and the DLA Weapons Support ASC Commodities Division requires the manufacture and supply of 403 close tolerance bolts. The components must meet the specifications of NSN 5306012325094 and adhere to strict physical identification and bare item marking per RQ017, with packaging conducted according to RP001 standards. Performance will take place at Robins Air Force Base. Eligible providers must possess precision machining equipment and maintain an active SAM registration with a valid CAGE code. The contract falls under NAICS code 332722, focusing on the delivery of high-precision hardware to prime contractors. Interested parties must respond by November 20, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Expedited Traceable Freight Shipping (Naval Delivery)This subcontract for Expedited Traceable Freight Shipping involves the transport and delivery of critical ship components for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary objective is to provide the fastest traceable means of transport to the USS Halsey DDG 97, specifically prohibiting the use of parcel post. The selected provider must utilize traceable shipping and tracking systems and possess the necessary authorizations to deliver shipments to military and naval installations. The contract is structured as FOB Destination, with the final delivery point being the end-user vessel. Managed under NAICS code 488510 for the Department of Defense, the performance location is designated as FPO 96667. Interested parties must adhere to the response deadline of November 20, 2026.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Manufacturing of Power Cable Assemblies (NSN 5995-01-737-8702)This subcontract involves the manufacture and supply of three electrical power cable assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the assemblies according to NSN 5995-01-737-8702 and the DLA Master List of Technical and Quality Requirements. All deliverables must undergo inspection per MIL-STD-1916 or ASQ H1331 and be packaged in accordance with MIL-STD-2073-1E. Strict adherence to the Buy American Act and the Berry Amendment is required for all materials used in production. The project falls under NAICS code 335931 and requires the delivery of completed, tested, and packaged units to a designated performance location in FPO 96667.
Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335991
New
DIBBS
Supplier of Electrical Contact Brushes (NSN 5977-01-333-6423)This subcontract involves the manufacture or procurement of 56 electrical contact brushes, identified by NSN 5977-01-333-6423, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet RA001 technical requirements and adhere to strict quality control standards using either MIL-STD-1916 or ASQ H1331 sampling plans. The agreement requires full compliance with the Buy American Act and the Berry Amendment. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards, with final delivery of the 56 units completed FOB Origin to the designated location in Tracy, California.
Carbon and Graphite Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS