Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE, COMMUNICATION

Active
SPE4A7-26-Q-0860Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 105 units of communication cable identified by NSN 5895-01-585-9410 under solicitation SPE4A7-26-Q-0860, with a delivery requirement within 86 days of award. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division and requires contractors to comply with a range of technical and quality requirements referenced from the DLA Master List, including cybersecurity compliance at CMMC Level 2 for third-party assessment organizations and physical identification or bare item marking standards. While item unique identification is not mandated by the service customer, DFARS 252.211-7003(c)(1)(i) still governs associated requirements. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD export training and been approved by DLA. Additional compliance obligations include adherence to DLA packaging standards, configuration change management for Edgewood materials, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and documentation procedures for source approval requests. The solicitation closes on July 31, 2026, and primary point of contact is Jessica Gentry at the Defense Logistics Agency.

General Info

Procure 105 communication cables under NSN 5895-01-585-9410, deliver in 86 days, comply with CMMC Level 2 and export controls.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
JESSICA GENTRY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE, COMMUNICATION
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL, BIOLOGICAL CENTER MATERIALS ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5895-01-585-9410 Quantity: 105 EA Purchase Request: 7012147056QTY: 105 Delivery: 86 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335929
New
DIBBS
SIDE LEFT ELECThe contract pertains to the procurement of five units of SIDE LEFT ELEC with NSN 6145-01-556-7082, under solicitation number SPE7M0-26-T-016N, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, and the place of performance is designated as Texarkana, Texas, with a ZIP code of 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package covering both the approved and alternate parts, as no specific data is currently available. The solicitation was posted on July 21, 2026, with bids due by August 3, 2026, and is categorized under NAICS code 335929. Primary point of contact is Abaigael Masterson, reachable via email and phone listed in the contract data.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
Federal
F/A-18 Cable Assembly, IRST Program Loader Set (PLS) BLOCK II
Navair Warfare Ctr Aircraft Division

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing and DeliveryThe contract entails the manufacture and delivery of a military-specification cable assembly identified by NSN 6150-01-674-3432, produced under previously approved production standards without the need for new first article testing. This ensures continuity in quality and compliance with established military requirements, streamlining the production process while maintaining readiness and interoperability for defense applications. The work is being executed under a subcontract tied to the Defense Logistics Agency, operating under the Department of Defense, with the North American Industry Classification System code 335929 indicating specialization in other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, and the place of performance and point of contact details are not specified, but the contract is administered through the DLA's procurement system as referenced by the award number SPE4A626P3799. The absence of set-aside information suggests this is open to qualified contractors without restrictions based on small business or other classification programs, emphasizing technical capability and adherence to legacy production protocols over procurement preferences. The contract underscores a focus on reliable, repeatable delivery of a standardized component critical to defense systems without introducing new validation overhead.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing (NSN 6150-01-313-1793)The contract involves the manufacture of a military-specification cable assembly identified by NSN 6150-01-313-1793, adhering strictly to federal supply standards and military performance requirements. Production is carried out under a firm-fixed-price arrangement, ensuring predictable costs and no adjustment for variations in material or labor expenses. The work falls under NAICS code 335929, which pertains to other electrical equipment and component manufacturing, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, and delivery must meet all applicable defense supply chain protocols, though specific delivery locations and contact details are not provided in the data. Compliance with technical specifications, quality control, and certification for military use are implicit requirements of this agreement.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing – NSN 5995-01-710-8063The contract involves the manufacture and delivery of a military-spec cable assembly identified by NSN 5995-01-710-8063, encompassing full production lifecycle activities including material sourcing, assembly, testing, and packaging. All work must comply with MIL-STD-129 requirements for labeling, ensuring proper identification with the assigned NSN and CAGE code on all units and packaging. The product is being procured under a subcontract structure by the Defense Logistics Agency on behalf of the Department of Defense, with manufacturing governed by NAICS code 335929 for other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to meet stringent military standards for quality, durability, and traceability, though specific delivery locations and point of contact details are not provided.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
High-Reliability Cable Assembly ManufacturingThe contract pertains to the manufacture of a military-specification power cable assembly identified by NSN 6150-01-657-1769, requiring precision wiring, rigorous shielding, and seamless connector integration to meet stringent defense standards. The assembly must demonstrate exceptional environmental durability to withstand extreme conditions inherent in military operations, including exposure to moisture, vibration, temperature fluctuations, and electromagnetic interference. Production must adhere to exacting quality and performance benchmarks to ensure mission-critical reliability under demanding operational scenarios. Issued as a subcontract under the Department of Defense’s Defense Logistics Agency, this effort falls under NAICS code 335929 for other electrical equipment and component manufacturing. Although the solicitation number and specific performance location are not provided, the contract is accessible via a DIBBS portal link, indicating it is part of a broader DoD procurement framework aimed at maintaining supply chain readiness. The posting date of July 20, 2026, suggests this is a forward-looking acquisition, likely designed to support ongoing or anticipated military system deployments requiring upgraded or replacement power cable solutions.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
RF Cable Assembly Manufacturing – NSN 5995-01-468-4693The contract entails the manufacture and delivery of RF cable assemblies designated by NSN 5995-01-468-4693, with an annual production range of 68 to 135 units, totaling up to 405 units over a three-year period. All units must meet the exact same quality, delivery, and compliance standards established under CLIN 0001, ensuring consistency and reliability across the program. The work is being executed as a subcontract under the authority of the Defense Logistics Agency, a division of the Department of Defense, with the North American Industry Classification System code 335929 identifying the industrial category as other electrical equipment and component manufacturing. The contract was posted on July 20, 2026, and is administered through the DIBBS system with the contract identifier SPE4A626D0113. While specific performance locations and contact details are not provided, the requirement implies a national scope with no geographic restrictions indicated for production or delivery.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
RF Cable Assembly Manufacturing – NSN 5995-01-623-8693The contract establishes a subcontract for the manufacture and delivery of RF cable assemblies identified by NSN 5995-01-623-8693, with an annual production rate of 24 to 48 units, totaling up to 144 units over a three-year period. All units must fully comply with applicable military specifications and are subject to government inspection upon arrival at the destination. Delivery is F.O.B. Origin, meaning the contractor assumes responsibility for the product until it is loaded onto the carrier at the point of origin. The work falls under NAICS code 335929, which categorizes it within the electrical equipment and component manufacturing sector. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance coordinated through a DIBBS procurement portal, though no specific point of contact or place of performance details are provided. The solicitation was posted in July 2026 and is configured as a subcontract without a formal set-aside classification.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Specialized Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of five specialized cable assemblies identified by NSN 6150-01-573-9388, each required to meet stringent technical and quality standards mandated by the Defense Logistics Agency for use in critical defense applications. The work must be performed in accordance with all applicable Department of Defense specifications, ensuring reliability and performance under demanding operational conditions. This is a subcontract opportunity issued under NAICS code 335929 for other electrical component and wiring device manufacturing, with a response deadline of July 28, 2026, and a posting date of July 20, 2026. The place of performance is designated as New Cumberland, Pennsylvania, with the contract administered by the ASC Commodities Division under the Department of Defense. All deliverables must comply with DLA requirements and be fully traceable to approved documentation and inspection protocols.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing and DeliveryThe contract requires the manufacture, testing, inspection, and delivery of nine military-specification cable assemblies identified by NSN 6150-01-129-7272, with full compliance to performance verification testing, source inspection requirements, and standardized MIL-STD packaging and labeling protocols. The work is being executed under a subcontract issued by the Defense Logistics Agency, a component of the Department of Defense, and falls under NAICS code 335929 for other electrical equipment and component manufacturing. All units must meet stringent defense standards to ensure operational readiness and interoperability in military environments, with no flexibility allowed in testing or documentation procedures. The contract was posted on July 20, 2026, and the place of performance is not specified, though the delivery and compliance obligations are binding regardless of location. The award reference is SPE4A626PX994, and the contracting activity is managed through the DLA’s procurement system.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Supply of Electrical Cable Clamps (NSN 5935015133891, M85049/38S25S)The contract entails the manufacture and delivery of 61 military-grade electrical cable clamps meeting SAE AS85049/38B and AS85049C technical specifications, designed for use in high-reliability environments including defense systems and nuclear reactor installations. The items are identified by NSN 5935015133891 and model designation M85049/38S25S, ensuring compliance with stringent aerospace and defense standards for electromagnetic compatibility, mechanical durability, and environmental resilience. The solicitation falls under NAICS code 335929 for other electrical equipment and component manufacturing and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. Although no specific delivery location or point of contact is provided, the performance likely supports critical defense infrastructure requiring certified component sourcing. The contract was posted on July 20, 2026, with procurement managed through the DIBBS platform, indicating formal federal supply chain protocols are in effect.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing – NSN 5995-01-697-5688
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks subcontractor support to achieve and maintain cybersecurity compliance with NIST SP 800-171 standards and prepare for CMMC certification, specifically for entities handling controlled unclassified information. Services include developing and maintaining comprehensive System Security Plans, implementing required security controls, and completing SPRS attestation to demonstrate compliance posture. All activities must align with Department of Defense requirements and are targeted at ensuring readiness for third-party audits and contractual obligations under CMMC frameworks. The work is to be performed in support of the ASC SUPPLIER OPER AE AND AF DIV under the broader DoD acquisition structure. This subcontract opportunity is open for response until August 20, 2026, and is classified under NAICS code 541512 for computer systems design services. There is no set-aside designation specified, and performance location details are not provided, but the work is expected to support DoD supply chain security initiatives. Interested parties must navigate the DIBBS platform via the provided link to access full solicitation details and submit proposals ahead of the deadline. The contractor is expected to deliver documented, auditable processes and artifacts that validate ongoing compliance and readiness for CMMC level assessment.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation & Marking ServicesThe contract seeks subcontractor services for the military-compliant packaging, preservation, and labeling of viewer mounts in accordance with MIL-STD-129, MIL-STD-2073-1, and DLA RP001 standards, ensuring all requirements for defense logistics and shipment readiness are met. The work must adhere strictly to federal military specifications governing labeling, containerization, corrosion prevention, and documentation to support secure and traceable delivery across the defense supply chain. The solicitation is issued under NAICS code 493190 for other warehousing and storage and is classified as a subcontract, with a response deadline of August 20, 2026. The contracting activity originates from the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with performance expected to align with DoD logistics protocols. All submissions must comply with the technical and procedural mandates of the referenced military standards and be submitted via the DIBBS portal by the specified deadline.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & First Article Testing (FAT) ServicesThe contract seeks independent verification and documentation of First Article Testing compliance to ensure that production processes and initial samples meet specified technical and quality requirements. This includes comprehensive inspection planning, execution of sample testing according to approved procedures, and the generation of a formal First Article Test report that validates conformance to contract specifications. The work is critical for validating manufacturing readiness and ensuring consistency before full-scale production begins, with all activities requiring strict adherence to established quality assurance protocols. This is a subcontract under the NAICS code 541330, relating to engineering services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is open for responses until August 20, 2026, and performance will be carried out in alignment with defense-specific quality standards. While no specific location or set-aside details are provided, the nature of the work indicates a focus on supply chain assurance for defense-related components, requiring qualified vendors with demonstrated expertise in aerospace or defense manufacturing compliance and formal reporting processes.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
DIBBS
Precision Machining of Viewer Mount ComponentsThe contract involves the manufacture of precision-turned metal components for a military viewer mount, requiring advanced CNC machining, surface finishing, and rigorous quality inspection adhering to MIL-STD-810G environmental testing standards and First Article Testing protocols. All work must meet exacting military specifications for durability, dimensional accuracy, and performance under extreme operational conditions. The subcontract is classified under NAICS code 332994 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by August 20, 2026. The components are intended for critical defense applications where reliability and compliance are non-negotiable, and all produced parts must undergo documented inspection and certification before delivery.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of a cover for electronic communication equipment, identified by NSN 5895012703108 and part number 13075913-019, with a quantity of 10 units. The item is classified as a Critical Application Item and must comply with strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers in the document. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, wrapping, and unit containment, and all markings must follow MIL-STD-129 without special marking codes. The product must be palletized according to DLA packaging requirements and delivered FOB origin to the designated delivery point at the DLA Distribution New Cumberland Facility in Pennsylvania. Delivery is required within 171 days from the contract date, with an original required delivery date of November 28, 2026, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances during sampling, which must follow MIL-STD-1916 or a comparable zero-based sampling plan. Attributes are assigned verification levels and AQLs as specified, with unspecified attributes treated as major. The contract enforces strict configuration change management and prohibits deviations without formal engineering change proposals or variance requests. The unit of issue is each, with no permitted quantity variance. Transportation and shipping details are governed by DLA procedural notes, and all documentation references point to official DLA and DoD systems for compliance. The solicitation number is SPE4A7-26-T-587A, with a response deadline of July 29, 2026, and the contracting officer is Tamera Greene of the Department of Defense.
Other Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a dial indicating pressure gage identified by part number SG4ND1HPWRANAG and NSN 6685012983789, with a quantity of 61 units to be delivered FOB origin within 315 days. The item is classified as a commercial item and is designated as a critical application item, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date. Manufacturing and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 05 for delicate instrument handling, and palletization in accordance with DLA packaging guidelines. Unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the item or its components, with exceptions permitted only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and attributes are to be verified at predefined levels. Physical identification of the bare item must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The contract includes a CDRL, and all technical data must conform to referenced specifications including MIL-G-18997E and DI-DRPR-80651. The solicitation is a total small business set-aside under NAICS code 334519, with point of contact information provided for inquiries.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PARTICLE SEPARATOR,The Contract involves the procurement of a single unit of a Particle Separator with NSN 1680-01-524-7206 under solicitation SPE4A7-26-T-584W, with a delivery deadline 171 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and inspection and acceptance at origin. The item is exempt from Item Unique Identification per the Service customer’s request, and government identification must be removed from non-accepted supplies. Export control applies to associated technical data under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization, including to foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Covered defense information applies, and all documentation requirements for source approval requests must be met. The performance location is Jacksonville, FL, with inquiries directed to NYA Currie at the provided DLA contact details.
Textile Bag and Canvas Mills

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUGThe contract is for 556 units of the terminal lug part number PV10-8R-L manufactured by PANDUIT CORP. with CAGE code 06383, identified by NSN 5940-01-668-4714, under solicitation SPE4A7-26-T-586T. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified; critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The product must be packaged in accordance with ASTM D3951 but subordinate to DLA’s stricter packaging rules, and all packaging must be marked and labeled per MIL-STD-129. Palletization must meet DLA’s RP001 packaging requirements, and the unit of issue is each (EA) with no tolerance for quantity variance. Delivery is FOB origin with an accepted delivery offset of 171 days, and the original required delivery date is February 17, 2027. All items are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. Inspection and acceptance occur at destination, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract was solicited on July 21, 2026, with proposals due by July 29, 2026, under NAICS code 335931 for electrical equipment manufacturing.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, SIGNAL DAThe contract pertains to the procurement of seven units of a Converter, Signal DA, with the NSN 5895-01-615-3408, under solicitation SPE4A7-26-T-585J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by July 29, 2026, and delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applied based on the acquisition type and revision dates in effect. The item involves controlled technical data subject to ITAR or EAR export regulations, prohibiting unauthorized disclosure or transfer to foreign persons, including foreign nationals in the U.S., and requiring compliance with DFARS 252.225-7048. Contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA to access such data. Inspection and acceptance occur at the manufacturer’s origin, non-accepted supplies must have government identification removed, and additional tailored quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, with Tamera Greene as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details