Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE, POWER, ELECTRICAL

Active
SPE7M2-26-T-6648Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 1,500 feet of electrical power cable under solicitation SPE7M2-26-T-6648. The material must adhere to MIL-DTL-24643/43G and MIL-DTL-24643D specifications and is designated as a critical application item. Because the advice code is 2N, the cable must be provided in continuous lengths, as multiple unit packs are unacceptable. The item is subject to the Qualified Products List or Qualified Manufacturers List, and the procurement is conducted under full and open competition. Delivery is required within 20 days after receipt of the order, with a quantity variance allowed of plus 10 percent and minus 0 percent. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Shipping is FOB origin, with the final destination being the Department of National Defence at CFB Esquimalt in Victoria, BC, Canada.

General Info

Procure 1,500 feet of continuous electrical cable for CFB Esquimalt within 20 days.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-6648 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA
Contacts
Miguel Limon
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE,POWER,ELECTRICAL
CABLE,POWER,ELECTRI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
1000 FT/REEL, NOMINAL LENGTHS PER SPEC
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
FULL AND OPEN COMPETITION APPLIES.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-24643/43G REVISION NR G DTD 11/27/2023 PART PIECE NUMBER: M24643/43-08UO
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-24643D REVISION NR D DTD 11/27/2023 PART PIECE NUMBER:
SPE7M2-26-T-6648
SECTION B
PR: 7018169019 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018169019 0001 FT 1,500.000
NSN/MATERIAL:6145012027749
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:ZZZ PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPECIAL QUP CODE ZZZ = 1000 PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
PCN0CA
DEPARTMENT OF NATIONAL DEFENCE
BASE COMMANDER CFB ESQUIMALT
BLDG 66 COLWOOD
VICTORIA BC V9C 1B0
CA
FREIGHT SHIPPING ADDRESS:
PCN0CA
DEPARTMENT OF NATIONAL DEFENCE
BASE COMMANDER CFB ESQUIMALT
BLDG 66 COLWOOD
VICTORIA BC V9C 1B0
CA
M/F: (TCN) PCN05V62362155
RDD: 266
PROJ: TP 2
SUPP ADD: PCAKOE SIG: L
SPE7M2-26-T-6648
SECTION B
PR: 7018169019 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: F9B ADV: 2N FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:09/01/2026
SPE7M2-26-T-6648 NSN/Part Number: 6145-01-202-7749 Quantity: 1,500 FT Purchase Request: 7018169019QTY: 1500 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M2-26-T-6647
This contract is for the procurement of 1,500 feet of electrical power cable, identified by NSN 6145-01-202-7749 and part number M24643/43-08UO. The material must adhere to MIL-DTL-24643/43G Revision G and is designated as a critical application item. Because the advice code is 2N, the cable must be provided in continuous lengths, as multiple unit packs are unacceptable. The contract is subject to the Qualified Products List or Qualified Manufacturers List and is open for full and open competition. Delivery is required within 20 days after receipt of order, with shipping and inspection occurring at the origin. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-12000, with a specific requirement that mercury shall not be intentionally added to the hardware. The shipment is destined for the Department of National Defence, Maritime Forces Atlantic in Canada. A quantity variance of plus 10 percent and minus 0 percent is permitted.
NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
Federal
61--CABLE,RADIO FREQUEN
Solicitation # N0010426QYAHT
This presolicitation notice, issued by the Navsup Weapon Systems Support Mech under solicitation number N0010426QYAHT, is for the procurement of 5,404 feet of radio frequency cable. The requirement is identified by NSN 1H-6145-009644662-SQ and follows TDP VER 010 and REF NR MILC915/48D. Deliveries are designated for DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. This opportunity is a total set-aside for small businesses, with a response deadline of October 19, 2026. Technical specifications and standardized documents can be obtained through the DoD Single Stock Point or the ASSIST-Online database. While the government is not currently utilizing FAR Part 12 for commercial item acquisitions, interested parties may notify the contracting officer of their ability to provide a commercial item within 15 days of the notice. The primary point of contact for this requirement is Taylor Weidman.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XD43
This contract is a firm fixed price solicitation for the procurement of 20 special purpose electrical cable assemblies, identified by NSN 5995-01-564-6466 and part number AE15285 from Times Microwave Systems, Inc. The delivery requirement is set for 280 days after the order is received, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and protect covered defense information as specified in the technical and quality requirements master list.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, RADIO FREQUENCY
Solicitation # SPE4A6-26-R-XD37
This contract is a firm fixed price solicitation for the procurement of 120 radio frequency cable assemblies, identified by NSN 5995-00-904-6314. The delivery requirement is 65 days after receipt of the order, with inspection and acceptance occurring at the destination. The procurement is a total small business set-aside under NAICS code 335929 and is managed by the ASC Commodities Division of the Department of Defense. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except in specific functional cases approved by NAVSEA.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 335929
New
Federal
RFQ 471924 DUNE VD Warm Bias SHV Cables
Solicitation # 471924
Brookhaven Science Associates is seeking information from potential suppliers capable of manufacturing high voltage SHV cable assemblies for the DUNE VD Warm Bias project, as outlined in the attached Statement of Work, Technical Drawing, and Qualifiers. This notice serves solely as a market research tool under FAR Part 10 and FAR Part 19 to evaluate industry interest and capability, and does not constitute a solicitation, commitment, or guarantee of future procurement. The anticipated NAICS code is 335929 with a size standard of 1,000 employees, and BSA is evaluating the possibility of a small business set-aside based on responses. Interested parties must submit a Statement of Capabilities that demonstrates their ability to meet the technical requirements, avoiding mere repetition of the SOW or promotional content. Respondents must confirm at least ten years of experience assembling high voltage cables rated at 10kVdc or higher, and provide assurance that they can supply documented quality control procedures with defined pass/fail criteria should a solicitation be issued. Companies must also state whether they accept FOB for domestic and DAP for international shipping, and indicate if their product qualifies as a commercial item under FAR 2.101. All submissions must include company name, SAM UEI, point of contact, and business size classification. Responses are voluntary, at the respondent’s sole cost, and must be received by July 20, 2026. The effort is managed by the U.S. Department of Energy through Brookhaven National Laboratory in Upton, New York, with Lisa Gonzales as the primary contact.
Brookhaven National Labor -Doe Contractor

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
Federal
CABLE ASSY LAUNCHER
Solicitation # N0010426QNE33
This solicitation is for the manufacture of Cable Assembly Launchers for submarine outboard use, governed by the Department of Defense and Navsup Weapon Systems Support Mechanicsburg. The contract requires strict adherence to technical drawings and the NAVSEA S9320-AM-PRO-020/MLDG molding manual, necessitating that the vendor be PRO-020 certified. Key technical requirements include hydrostatic testing, mercury-free material compliance, and specific cable jacket adhesion testing for arctic neoprene materials. The procurement process involves rigorous quality assurance, including the submission of a Quality Conformance Test Plan and mandatory First Article Testing (FAT) witnessed by the government for non-qualified sources. All delivered units must include a Test Inspection Report and a Certificate of Conformance. The contract is designated as a DO-rated order for national defense under the Defense Priorities and Allocations System and requires the use of Wide Area Workflow (WAWF) for payments and reporting.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 335929
New
Federal
CABLE ASSY LAUNCHER
Solicitation # N0010426QNE71
Solicitation N00104-26-Q-NE71, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the manufacture and quality assurance of the Cable Assy Launcher (NIIN 015688539). This is a source control item requiring the contractor to be PRO-020 approved and compliant with NAVSEA S9320-AM-PRO-020/MLDG molding standards. The hardware must meet the design and performance specifications outlined in drawing 7454380-2. Key technical requirements include hydrostatic testing, cable jacket adhesion testing for arctic neoprene, and strict adherence to mercury-free material standards. The contract mandates First Article Testing (FAT) and 100 percent production lot quality conformance testing, with all test procedures requiring government approval prior to production. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) color ratings. Delivery is specified as FOB Destination with a lead time of 180 days. All items must be marked with Unique Item Identification (UID) per MIL-STD-130N and packaged according to MIL-STD-2073-1. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The procurement is DO certified for national defense under the Defense Priorities and Allocations System (DPAS) and incorporates Buy American and CMMC cybersecurity requirements.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335929
New
REEL AND CABLE ASSY — 1680015106791 — SPRPA126RRB07
Solicitation # SPRPA1-26-R-RB07
This contract is for the procurement of 10 units of a reel and cable assembly under NSN 7R-1680-015106791-CB, with delivery terms set as FOB Origin. Due to the flight critical nature of the part and the specialized engineering and manufacturing knowledge required, the item requires engineering source approval from the design control activity. The government intends to negotiate with a single source under FAR 6.302-1 because the approved sources retain essential technical data and proprietary knowledge not economically available to the government. Prospective bidders who are not already approved sources must submit detailed information as specified in the NAVSUP Weapon Systems Support Source Approval Information Brochures along with their proposals. Failure to provide the required qualification data will result in the offer not being considered for award. While the government is currently pursuing a single-source procurement, interested parties may submit capability statements or proposals within the specified timeframe for consideration.
Pa DLA Aviation At Philadelphia

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-321B
This contract is for the procurement of 13 spools of special purpose electrical power cable, identified by NSN 6145007563021 and part number M27500-20A2T00. Each spool contains 500 feet of cable and must adhere to NEMA WC 27500-2025 standards. This is designated as a critical application item, and the use of class I ozone depleting chemicals is strictly prohibited. The order is managed under solicitation SPE7M1-26-T-321B with a required delivery date of October 5, 2026, and a delivery window of 66 days. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements, while following all technical and quality standards listed in the DLA Master List.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-289Y
This contract, identified as solicitation SPE7M1-26-T-289Y, is issued by the Department of Defense Maritime Supply Chain for the procurement of 922 feet of electrical power cable, specifically part number M27500-14SD1T23 under NSN 6145011537904. The item is designated as a critical application item and must adhere to NEMA WC 27500-2025 standards. Procurement is subject to full and open competition and requires compliance with the Qualified Products List or Qualified Manufacturers List. The delivery is set for 140 days after order, with a required delivery date of August 20, 2026, and a need ship date of January 19, 2027. Shipping is FOB Origin and destined for DLA Distribution Warner Robins in Georgia. Packaging and preservation must comply with MIL-DTL-12000, MIL-STD-129, and DLA packaging requirement RP001, with a quantity variance allowed of plus or minus 5 percent. Specific requirements for continuous length material apply based on the assigned advice code, and the contract incorporates technical and quality requirements from the DLA Master List.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M1-26-T-289B
Solicitation SPE7M1-26-T-289B, issued by DLA Land and Maritime, is a request for quotations for 9,500 feet of electrical power cable, identified by NSN 6145-01-202-9527. The procurement is conducted under full and open competition with a NAICS code of 335929. The required material must adhere to basic specification MIL-DTL-24643/2G Revision G and is designated as a Qualified Products List or Qualified Manufacturers List item. Delivery is required by February 2, 2027, with a final required delivery date of February 16, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract allows for a quantity variance of plus or minus 5 percent. Technical requirements include strict adherence to MIL-DTL-12000 for preservation and packaging and MIL-STD-129 for marking. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipping terms are FOB Origin, while inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-321L
This contract is for the procurement of electrical power cable, identified by NSN 6145014183761 and part number M27500-18RC4S09, conforming to NEMA WC 27500-2025 standards. The requirement is for a quantity of 1 foot, with a quantity variance allowed up to plus 10 percent. Delivery is required within 10 days after receipt of order, with the shipment destined for Fort Wainwright, Alaska. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Specific attention is required regarding the length of the material, as continuous length requirements are dictated by the advice code. Additionally, the item is listed on a Qualified Products List or Qualified Manufacturers List, and the contractor must comply with DLA packaging requirements and configuration change management protocols.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7M2-26-T-6651
This contract is for the procurement of 3,000 screw thread inserts, identified by NSN 5325010263259 and part number MS21209C0420L. The items must adhere to technical and quality requirements including NASM21209 Revision 4 and NASM8846 Revision 2. The contract specifies a delivery timeframe of 138 days with a required delivery date of June 15, 2027, and designates the shipping and acceptance point as DLA Distribution Warner Robins in Georgia. The agreement mandates strict compliance with DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The contract is issued under full and open competition and requires adherence to configuration change management and government identification removal protocols for non-accepted supplies.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
SLEEVE, COMPRESSION, TUB
Solicitation # SPE7M2-26-T-6650
This contract is for the procurement of 788 compression sleeves for tube-hose fittings, identified by NSN 4730-01-008-5969 and part number SAE J514-2 6 080115SA. The items are classified as critical application items and must adhere to SAE J514-2 Revision D standards. The agreement specifies a delivery timeframe of 81 days after order, with a required delivery date of April 24, 2027, and shipping destined for the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict compliance with DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. A significant environmental restriction is placed on the use of mercury, prohibiting its intentional addition to hardware except in specific functional cases approved by NAVSEA. The procurement is conducted under full and open competition and includes specific guidelines for configuration change management and the removal of government identification from non-accepted supplies.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MULTIPLE AN
Solicitation # SPE7M2-26-R-0005
DLA Land and Maritime is seeking a firm-fixed price contract for the procurement of 24 Support Bracket Assemblies, identified as NSN 5340-01-435-3375. The item is designated as an Aircraft Launch and Recovery Equipment Critical Application Item and must be manufactured according to Navy drawings. Only NAVAIR approved sources are eligible for award, although manufacturers not currently designated may submit a Source Approval Request package. The procurement includes quantity ranges up to 30 units to accommodate changing demands, with a requested delivery of approximately 800 days after the award date, which accounts for first article testing approval. The solicitation requires origin inspection and acceptance. While price is a significant factor, the final award decision will be based on a combination of price, delivery, past performance, and other evaluation factors. The government is not utilizing Part 12 acquisition policies for commercial items for this requirement. The procurement is subject to the Trade Agreements Act of 1979, and all offers must be submitted in English and U.S. Dollars. Potential requirements for suppliers may include EJCP certification, NIST compliance, and various levels of first article or production lot testing. The solicitation is expected to be available on DIBBS around August 9, 2026, with a response deadline of October 2, 2026.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7M2-26-T-6646
This contract is for the procurement of 6,000 zinc-plated steel flat washers under solicitation SPE7M2-26-T-6646 for the Department of Defense Nuclear Reactor Program. The items are designated as critical application items with specific dimensional requirements: an inner diameter between 0.805 and 0.842 inches, an outer diameter between 1.993 and 2.030 inches, and a thickness between 0.122 and 0.177 inches. The hardware must comply with FF-W-92C revision C and is subject to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. Delivery is required within 146 days to DLA Distribution Puget Sound in Bremerton, Washington, with a required delivery date of June 9, 2027. The contract mandates strict adherence to DLA packaging requirements and prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Inspection and acceptance will take place at the destination, and marking must follow MIL-STD-129.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M2-26-Q-0793
This solicitation, issued by the Nuclear Reactor Program under the Department of Defense, is for the procurement of three switch assemblies with part number 5930-01-462-3750. The contract requires delivery within 262 days after the order is received and specifies performance in Tracy, California. The agreement incorporates specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components to be considered.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE7M2-26-Q-0792
This contract is for the procurement of 526 socket head self-locking screws, identified as part number NAS1352C4LL10. The items are designated as critical application commercial items and must be manufactured according to the current revision of the applicable part standard. Key technical requirements include CRES passivation and adherence to MIL-STD-130N for identification marking. Gauging for Class 3A and 3B threads must follow FED-STD-H28/20, and the use of mercury or mercury-containing compounds is strictly prohibited. The agreement is a firm fixed price contract with a delivery requirement of 150 days after order. Quality assurance will be managed through a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Packaging and palletization must comply with DLA requirements and MIL-STD-2073-1E, with final inspection and acceptance occurring at the destination. All deliverables are to be shipped to the DLA Distribution New Cumberland facility.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M2-26-T-6225
Solicitation SPE7M2-26-T-6225, issued by the Department of Defense Nuclear Reactor Program via DLA Land and Maritime, is for the procurement of 176 electrical plug connectors (NSN 5935-01-131-7614, Part MS3406DJ18A10P). This is a critical application item requiring strict adherence to SAE AS34061 Revision A and SAE AS50151 Revision E standards. The manufacturer must be Qualified Products List (QPL) approved at the time of award. The contract mandates a mercury-free composition, with specific exceptions for functional components as defined by NAVSEA 5100-003D. Deliveries are set for FOB Origin with a required delivery date of June 4, 2027, and a need ship date of February 2, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-55330, while marking and labeling must follow MIL-STD-129. Inspection and acceptance will occur at the destination. Invoicing is mandated through the Wide Area WorkFlow (WAWF) system. Offerors must submit quotations electronically via the DIBBS portal by August 24, 2026, including all necessary SAM representations and certifications.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
SCREW, EXTERNALLY RELIE
Solicitation # SPE7M2-26-T-6649
This contract is for the procurement of 200 externally relieved body screws, identified by NSN 5305-00-989-4859. The items are designated as critical application items and must adhere to the requirements of a source controlled drawing, specifically TDP Rev A Gen 1 reference drawing 80064 2618682 Revision A. Approved sources include Matthew Warren Inc, Unicorp, Carey Manufacturing Co, The Boeing Company, BAE Systems, and L3Harris Interstate Electronics. The agreement mandates strict compliance with DLA technical and quality requirements, including specific packaging, marking, and configuration management standards. A key restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Delivery is required within 146 days, with the final destination and inspection point set at DLA Distribution San Diego.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M2-26-T-6630
This solicitation is for the procurement of 10 pipe elbows under part number 4730-00-181-8513 for the Nuclear Reactor Program within the Department of Defense. The items must be produced using a metal casting process, which requires specific tooling. Delivery is required within 20 days after receipt of the order. Compliance requirements include adherence to DLA packaging standards and CMMC Level 2 certification. Because the technical data is subject to ITAR and EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete required training to access the data. Interested parties should contact the Aviation or Land and Maritime supply chain teams for sourcing and tooling assistance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6164
The contract specifies the procurement of 4,846 packages of Terminal, Lug, with each package containing 100 units, identified by NSN 5940-01-054-6295 and part number MS21004-4, conforming to SAE AS21004F and SAE AS7928 standards. The item is classified as a commercial item and is subject to the Qualified Products List or Qualified Manufacturers List, requiring compliance with all technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and ISO/IEC 16388 for barcoding, with no special marking required. Packaging must conform to DLA Packaging Requirements, and preservation methods must meet specified codes including QUP:001, PRES MTHD:31, and PACK CODE:U. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable instruments containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin with a 158-day delivery period, and inspection and acceptance both occur at the destination facility in New Cumberland, Pennsylvania. Payment is governed by WAWF, requiring electronic submission of invoices and receiving reports via the Wide Area Workflow system. Contract clauses enforce compliance with cybersecurity standards including NIST SP 800-171, safeguarding covered defense information, prohibitions on hexavalent chromium and controlled equipment from Communist Chinese military companies, trafficking in persons, employment eligibility verification, and sustainable product requirements. The contractor must maintain representation of small business status, Socioeconomic certifications, and Unique Entity ID, and is subject to reporting obligations regarding covered telecommunications equipment and cyber incidents. All contractual obligations are binding under fixed-price terms, with changes governed by FAR 52.243-1, and deviations from requirements require prior written authorization. The solicitation closed on August 20, 2026, with performance beginning in January 2027 and a required delivery by April 13, 2027.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in about 17 hours
View Details
New
DIBBS
MISCELLANEOUS
Solicitation # SPE7M2-26-Q-0779
This contract is for the procurement of six piston rods identified as Aircraft Launch and Recovery Equipment Critical Application Items. Due to the critical nature of these parts, the offeror must be an approved source or provide products from a source approved by the Naval Air Warfare Center Aircraft Division Lakehurst. Strict serialization and packaging traceability are required, and the contractor must account for all serialized parts, including scrapped material. Re-branding that obscures original OEM markings is prohibited. Compliance requirements include CMMC Level 2 certification, SAE AS9100 quality standards, and specific non-destructive testing accreditation. The contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Additionally, the technical data is subject to ITAR or EAR export controls, requiring approved JCP certification for access. All items must be marked according to MIL-STD-129 and specific NAVAIR traceability requirements, with delivery expected within 1015 days after receipt of the order.

POSTED

1 day ago

DEADLINE

in 6 days
View Details