CABLE REEL

CABLE REEL
REEL, CABLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Certificate of Quality Compliance (CoQC) Contract Data Requirements
SPE8ED-26-T-1407
SECTION B
Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
NAVAL SEA SYSTEMS COMMAND (53711)
P/N S6505-74249-1
TECHNICAL DATA AVAILABILITY:
EXCEPTIONS:
I/L/O MS35214-55 USE NASM35214-55.
I/L/O MS35649-205B USE NASM35649-205B
ITEM 13, I/L/O DWG S6501-74211 USE
MIL-T-24649/9 (TYPE H39A)
ITEM 14, I/L/O DWG S6505-74120-2 USE
MIL-T-24649/8 AND MIL-T-24649/16 (TYPE H25A)
ITEM 15, I/L/O MIL-C-24643/9 USE MIL-DTL-24643/9
P/N M24643/9-01UN
ITEM 16, I/L/O MIL-C-24643/9 USE MIL-DTL-24643/9
P/N M24643/9-01UN
CRITICAL APPLICATION ITEM
TDP Rev A Gen 4 IAW BASIC DRAWING NR 53711 S6505-74249 REVISION NR D DTD 08/06/1993 PART PIECE NUMBER: S6505-74249-1
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MIL-DTL-24643/9G REVISION NR G DTD 11/27/2023 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MIL-T-24649A SUP 1 REVISION NR A DTD 06/10/1994 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MIL-T-24649/7 REVISION NR DTD 06/10/1994 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MIL-T-24649/9 REVISION NR DTD 06/10/1994 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MIL-T-24649/16 REVISION NR DTD 06/10/1994 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE SPEC NR MS51414A NOT 2 REVISION NR A DTD 09/19/2018 PART PIECE NUMBER:
SPE8ED-26-T-1407
SECTION B
PR: 7018256725 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018256725 0001 EA 450.000
NSN/MATERIAL:8130002638644
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E8 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3450
DLA DIST. JEDDAH SAUDI ARABIA
USMTM PSC 1203
APO AE 09803
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3450
DLA DIST. JEDDAH SAUDI ARABIA
AGILITY LOGISTICS COMPLEX, WHSE 06
C5JX+XCP, AL MAHJAR DISTRICT
JEDDAH 22233
SA
Need Ship Date:00/00/0000 Original Required Delivery Date:12/09/2026
SPE8ED-26-T-1407
SECTION B
PR: 7018256725 PRLI: 0001 CONT’D
SPE8ED-26-T-1407 NSN/Part Number: 8130-00-263-8644 Quantity: 450 EA Purchase Request: 7018256725QTY: 450 Delivery: 161 days ADO