Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cadmium Plating and Chromate Finishing Services

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized chemical plating and finishing services for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The scope of work focuses on applying a cadmium plated chromate finish to steel hexagon nuts, specifically part number MS35691-46, ensuring all processes adhere to strict military finish specifications and environmental regulations. The contractor is responsible for utilizing appropriate cadmium plating baths and chromate conversion equipment to deliver the finished hardware. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

General Info

Cadmium plating and finishing services for DoD steel hexagon nuts in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8880.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, PLAIN, HEXAGON

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs chemical plating and finishing for prime contractors on DLA Weapons Support ASC projects. Applies cadmium plated chromate finish to steel hexagon nuts per specifications for part number MS35691-46. Utilizes cadmium plating baths and chromate conversion equipment in compliance with military finish specifications and environmental regulations. Delivers plated and finished steel nuts.

Similar Contracts

Same NAICS industry code

Gearshaft Heat Treatment and Surface FinishingThis subcontract involves providing specialized heat treating, hardening, and surface coating services for gearshaft components supporting DLA Weapons Support Land Supplier Operations. The scope of work includes applying case hardening, tempering, and corrosion-preventative surface finishing for part number 0352899, utilizing industrial heat-treatment furnaces and surface grinding equipment. All deliverables must strictly adhere to the quality standards outlined in the DLA Master List. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Wheeled Vehicles agency, with performance taking place in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026. This requirement falls under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing ServicesThe Aerospace Surface Treatment and Finishing Services subcontract involves providing specialized plating and surface treatments for brackets on DLA Weapons Support ASC projects. The contractor is responsible for applying finishes in accordance with MIL-STD-1949, MIL-STD-130, or MIL-STD-2219 as specified in the Technical Data Package for critical application items. Performance of these services will take place at Robins Air Force Base. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and ensure full ITAR and EAR compliance for the handling of controlled parts. This opportunity is managed by the Department of Defense under NAICS code 332813, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Aerospace Coating and Surface TreatmentThis subcontract for Aerospace Coating and Surface Treatment involves providing specialized coating and surface finishing services for actuator housings on DLA Weapons Support ASC projects. The selected contractor will be responsible for applying protective or functional coatings in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. To qualify, providers must possess industrial plating equipment and maintain certification under SAE AS9003 or ISO 9001 quality systems. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813. The final deliverable for this engagement is the provision of finished, coated actuator housings.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract, titled Aerospace Component Finishing and Coating, involves providing specialized surface treatments and coatings for prime contractors supporting DLA aerospace supply contracts. The scope of work focuses on applying specific aerospace platings and anodizing to shaft and tube components to ensure corrosion prevention. All operations must be conducted without the use of Class I ozone-depleting chemicals to comply with strict contract restrictions, and all finished components must meet DLA quality standards. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, and is categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Aerospace Special Process Services (NADCAP)The Aerospace Special Process Services subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, involves performing NADCAP-approved special processes for aircraft components. The scope of work includes heat treating, chemical processing, or anodizing as detailed in Drawing 20145214, with a strict requirement that the provider maintains current NADCAP approval for the specific processes executed. All delivered components must strictly adhere to established metallurgical and surface finish specifications. The performance of this contract is centered at Tinker AFB. Interested parties should note the posting date of November 5, 2026, with a response deadline set for November 13, 2026. The project falls under NAICS code 332813 and is managed through the DLA Weapons Support ASC.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface preparation and protective coating applications for PN 320-4-49852-101. Working under prime contractors for the Department of Defense DLA Weapons Support ASC, the selected provider must utilize industrial coating booths and curing ovens to deliver finished flanges that meet all technical data package specifications and are ready for final inspection. The project requires the contractor to maintain ISO 9001 or SAE AS9003 certification to ensure quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Precision Coating and Finishing ServicesThis subcontract for Precision Coating and Finishing Services involves applying specialized coatings and finishes to tool components for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. All work must be performed in accordance with Basic Drawing 19207 12283494 and executed at the performance location in Texarkana, Texas. The contractor must maintain ISO 9001 quality management standards and ensure strict compliance with ITAR and EAR regulations due to the critical nature of the gun components involved. Additionally, the use of Class I Ozone Depleting Chemicals is strictly prohibited under the terms of this agreement.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

NADCAP Accredited Special Process FinishingThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC, to provide specialized aerospace finishing for 49 structural brackets. The scope of work involves executing special processes such as anodizing, plating, heat treating, and non-destructive testing in accordance with technical drawing callouts using industrial furnaces and plating tanks. Performance will take place at Tinker AFB. To be eligible, contractors must hold NADCAP approval and maintain US/Canada Joint Certification to ensure full ITAR and EAR compliance. This is a total small business set-aside under NAICS code 332813. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and Coating for Aircraft FairingsThis subcontract involves providing specialized aerospace surface finishing and coating services for aircraft fairings under the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of aerospace-grade primers and anti-corrosive treatments in accordance with technical data for NSN 1560-01-147-8383. Performance will take place at Tinker AFB, utilizing industrial spray booths and curing ovens to deliver components ready for final assembly. To be eligible, contractors must hold ISO 9001:2015 or AS9100 certification. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Metal Finishing and Coating for Pin AssembliesThis subcontract for Metal Finishing and Coating for Pin Assemblies supports prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The scope of work involves providing comprehensive surface treatment, plating, and coating services, including surface preparation, cleaning, and the application of protective coatings such as passivation, anodizing, zinc, and cadmium. All work must be performed in accordance with Drawing NR 19207 12369003 and the DLA Master List of Technical and Quality Requirements, utilizing industrial plating tanks and surface roughness testers to deliver finished coated pin assemblies. The project is categorized under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Finishing and Coating

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The selected provider will perform specialized surface coating, plating, and finishing services for prime contractors, specifically applying aerospace-grade finishes such as painting, anodizing, and chemical conversion coating. All work must adhere to Boeing technical requirements and be performed using certified spray booths or industrial plating tanks to deliver bracket components ready for final assembly. Performance will take place at Tinker AFB, and the contractor must maintain NADCAP accreditation and ISO 9001 compliance to ensure quality standards. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Critical Application Sleeve Bearings (P/N HS5445-1)This subcontract involves the procurement and delivery of four specialized sleeve bearings, part number HS5445-1, sourced from the Roller Bearing Company of America, Inc. These components are intended for prime contractors delivering to the Department of Defense under the DLA Weapons Support ASC Commodities Division. Due to the nature of the equipment, the items must adhere to Critical Application Item quality standards. The contract requires the submission of receiving reports through the Wide Area Workflow system. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 332510. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Plain Rod End Bearing Supplier (NSN 3120014551641)

Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)This subcontract involves the procurement of 3,908 blind rivets to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to Part Number CCR274SS-3-6 and NSN 5320-00-718-0835, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this contract. All deliverables must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The final shipment of 3,908 units is to be delivered FOB Origin to Tinker AFB, Oklahoma. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-00-269-0783)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 8,627 socket head cap screws. The components must strictly adhere to NSN 5305-00-269-0783 specifications, with marking and packaging requirements governed by MIL-STD-129 and MIL-STD-2073-1E respectively. All units are to be delivered to a designated destination point for final inspection and acceptance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Albany. Interested parties must respond by November 13, 2026, to provide these essential supplies for prime contractors supporting DLA Weapons Support supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe Defense-Compliant Packaging and Marking Services subcontract involves providing military-grade marking, packaging, and palletization for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must ensure all shipments are prepared for FDT pickup in Norfolk, Virginia, utilizing industrial labeling equipment and MIL-SPEC materials. Technical execution requires strict adherence to MIL-STD-129 for markings and RP001 for palletization and shipping preparation. Contractors must possess specialized knowledge of the DLA Master List of Technical and Quality Requirements to ensure all deliverables meet Department of Defense standards.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Straight Headless PinsThis subcontract involves the precision manufacturing of straight, headless pins under NSN 5315-01-699-5499 for the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate these components according to NASM16555 Revision 4, adhering strictly to Critical Application Item designations. Production must be carried out using precision machining equipment, as additive manufacturing is explicitly prohibited. To qualify, the provider must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. The finished products are to be delivered to Norfolk, Virginia. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solid Rivet Supplier (NSN 5320-00-584-9078)This subcontract involves the manufacture and supply of 203 lbs of precision solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be produced according to NSN 5320-00-584-9078 specifications, with strict adherence to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Final delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain either SAE AS9003 or ISO 9001 quality certification and demonstrate cybersecurity compliance with NIST SP 800-171. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Precision Machining and Manufacture of Sleeve Bushings (NSN 3120-01-491-2867)This subcontract, issued by the Department of Defense for the DLA Weapons Support ASC Commodities Division, requires the precision machining and manufacture of 17 sleeve bushings under NSN 3120-01-491-2867. The contractor must produce these units in strict accordance with Basic Drawing NR 53711 7225857 Revision B and Quality Assurance Reference QAP 13873 QAP-B02 Revision B. All work must be performed using CNC machining and inspection tools calibrated to industry standards, with final delivery consisting of 17 finished and labeled bushings. The opportunity is a total small business set-aside under NAICS code 332710, with performance located in New Cumberland. To be eligible, the contractor must maintain CMMC Level 2 certification as well as either SAE AS9003 or ISO 9001 certifications. The response deadline for this requirement is November 13, 2026.

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Specialized Finishing for M240 Components

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

CARC and Phosphate Coating Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Chemical Finishing and Anodizing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Aerospace Aluminum Heat Treating

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Finishing and Coating

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Cadmium Plating for Missile Mounting Plates

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Industrial Coating for Pivot Pin Extractors

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

CRES Passivation Finishing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Phosphate Coating and Finishing Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Surface Treatment and Plating for Electrical Backshells

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and Coating

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS