This Solicitation opportunity from Pennsylvania was posted on June 17, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

California Campus- Rutledge Institute Renovations

Closed

PennBid: 191096State & Local

Submission Closed07/17/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

SLED

Two (2) 940 Rough Terrain Forklifts

Solicitation # WMATA-0000010949

The Washington Metropolitan Area Transit Authority is soliciting bids for the procurement of two 940 Rough Terrain Forklifts. This solicitation, identified by number WMATA-0000010949, falls under NAICS code 333924 and is managed through the agency's Virginia organization. The solicitation was posted on October 27, 2026, with a strict response deadline of October 30, 2026, at 7:00 PM. Interested parties must submit their responses via the official supplier portal by the specified cutoff date.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

30 Ton Heavy Duty Wrecker

Solicitation # W91QVN27QA001

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Supply, Delivery and Maintenance of Electric Lift Trucks (Forklitfts)

Solicitation # tender_22286

The Ministry of the Solicitor General for the Government of Ontario is seeking a provider for the supply, delivery, and maintenance of three fully electric forklifts: one stand-up reach truck and one sit-down forklift for the Central East Correctional Center, and one sit-down forklift for the Central North Correctional Center. The equipment must be capable of indoor and outdoor operation, featuring a triplex mast, a minimum load capacity of 3,500 pounds, a minimum lift height of 17 feet, 42-inch forks, and both side shift and tilt capabilities. The scope of work extends beyond delivery to include warranty coverage, preventative maintenance, repair services, and technical support to minimize downtime and ensure health and safety compliance. The procurement process follows a four-stage evaluation: a mandatory requirements review, a pass/fail technical data sheet assessment, a scored technical response, and a commercial evaluation based on a relative pricing formula. Bidders must provide a nine-digit CRA business number and certify their business continuity plans, customer satisfaction survey practices, and environmental sustainability initiatives. Delivery is prioritized for the 2026-27 fiscal year, with options ranging from four weeks to a final deadline of March 29, 2027. Successful contractors must adhere to strict occupational health and safety standards, including OHSA compliance, WSIB coverage, and the provision of an accessible emergency evacuation plan.

POSTED

DEADLINE

Heavy-Duty Truck Tractor SupplyThis subcontract, managed by the Department of Defense under the 0411 Aq Hq Contract Augmented agency, requires the supply of 15 brand new 6x4 Truck Tractors for prime contractors working on USFK vehicle procurement projects. The selected provider must ensure all units meet specific physical and performance characteristics and must submit comprehensive technical specifications and manufacturer documentation. A critical requirement of the agreement is the provision of a Vehicle Manufacturer’s Certificate that explicitly designates USFK as the first owner. The contract falls under NAICS code 333924 and mandates the full delivery of all 15 heavy-duty units in accordance with the established guidelines.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Solicitation # W91QVN27RA006

Solicitation W91QVN27RA006 is a firm fixed price, unrestricted contract for the procurement and delivery of 15 brand new 6x4 truck tractors to support the 19th Expeditionary Sustainment Command theater-wide operations. The vehicles must feature a diesel, in-line 6-cylinder engine with approximately 12.7-liter displacement and a 12-speed automated manual transmission. Delivery is scheduled for calendar year 2027, with a performance window from January 1 to December 31, 2027, and must be completed within 240 calendar days of the award or notice to proceed. The delivery is FOB Destination, door-to-door to Camp Humphreys, and requires coordination with the point of contact three working days in advance. This contract is uniquely funded by the Government of the Republic of Korea (ROK), which will pay the contractor directly; no United States appropriated funds are obligated. Invoices must be submitted in five copies and clearly cite MOA Contract - funded by ROK MND. Award will be based on the most advantageous offer, with technical qualifications and price weighted approximately equally. Technical evaluations are pass/fail based on compliance with salient characteristics, while price is reviewed for reasonableness and completeness. Offerors must submit quotations electronically via the PIEE Solicitation Module by November 12, 2026, including a plan to obtain a manufacturer's certificate specifying USFK as the first owner and required Korean contractor certifications.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

3930--Combined Warehouse Forklift With 26' Lift Height

Solicitation # 36C25927Q0031

The Department of Veterans Affairs, Network Contracting Office 19, has issued a Sources Sought Notice for the procurement of a new sit-down rider lift truck and battery for the Oklahoma City VAHCS Warehouse. The primary objective is to acquire equipment capable of reaching a minimum lift height of 26 feet to accommodate higher racking systems in a new warehouse facility. The requirement specifies a Crown Forklift model FC5715-40 or an equal alternative, featuring a minimum load capacity of 4,000 lbs, 36-volt power, and a Vforce VTA battery compatible with the existing Crown Vforce V-HMF3 Series charging station. Additional technical requirements include 36-inch forks, adjustable outriggers, dual AC drives, side shift and forward back tilt capabilities, and integrated brake, backup, and front-mounted work lights. This request is for information and planning purposes and does not constitute a formal solicitation. Interested contractors must submit a capabilities statement and a detailed product description, including the manufacturer's information and estimated delivery time, to Peyton Wilkerson by 15:00 MST on November 9, 2026. Submissions are limited to 8 pages and should be sent via email. The government has identified NAICS code 333924 as the primary classification for this effort, with a small business size standard of 900 employees, though respondents may suggest alternative codes that better represent the scope of work.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Solicitation # W911S227U0082

Solicitation W911S227U0082 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the acquisition of one new Vacuum Lift Assist unit. This procurement is a Total Small Business Set-Aside under NAICS code 333924. The requirement is designated as brand name or equal, specifically referencing SmartLift US, Inc. Part Number SL 409 HLE RT. The equipment must be new, as used or remanufactured products are prohibited. Key technical specifications include a minimum general lifting capacity of 950 lbs, a minimum extended boom lifting capacity of 220 lbs, dimensions of 8.5 x 2.69 x 4.69 feet, a curb weight of 1610 lbs, and a driving speed of 3.7 mph. The award will be made to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. The contract requires the delivery of the unit to RIA-JMTC 61299 on an F.O.B. destination basis, with a preferred delivery window of 30 days. Deliverables must include all relevant schematics, user and maintenance manuals, and a minimum one-year parts and labor warranty. Offerors must submit their quotes exclusively through the Procurement Integrated Enterprise Environment (PIEE) Solicitation module to be considered responsive. Additionally, a completed Attachment 1 regarding certifications and country of origin is mandatory. The solicitation incorporates various federal and defense clauses, including the Buy American Act, preferences for domestic commodities, and specific prohibitions regarding business operations in certain foreign regions.

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0127

Solicitation SPE8EF-27-T-0127 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment Manu and Con for the procurement of 138 platform skids, identified by NSN 3990-01-653-4153 and part number 03159940011. The solicitation was posted on October 26, 2026, with a response deadline of November 5, 2026. This is not a small business set-aside, and all quotes must be submitted through the DLA Internet Bid Board System. The required delivery date is February 27, 2027, with a need ship date of April 12, 2027, delivered FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must provide a complete data package for approved and alternate parts for evaluation. Technical and quality requirements are governed by the DLA Master List, specifically RP001 for packaging and palletization, RA001 for general technical requirements, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, sustainable products, and safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Heavy Equipment Rigging and InstallationThis subcontract for Heavy Equipment Rigging and Installation involves the delivery, unloading, positioning, and installation of a 28-ton Plasma Press/Punch for prime contractors working on Texas Department of Criminal Justice projects. The scope of work requires the use of heavy-lift cranes and rigging gear to transport the machinery, followed by precise leveling and securing the equipment to the facility floor in a designated area. To ensure operational safety and compliance, the contractor must possess valid rigging certifications and strictly adhere to all facility safety protocols. The project is categorized under NAICS code 333924, with a response deadline set for November 6, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Doc5883971531 Supply of Battery Operated Heavy Duty Forklift (2026)

Solicitation # 235245

TransLink, the South Coast British Columbia Transportation Authority, has issued solicitation number 235245 for the supply of battery operated heavy duty forklifts. This procurement process is managed through the Province of British Columbia and requires performance of the contract within British Columbia, Canada. The solicitation was officially posted on October 23, 2026, and interested parties must submit their responses by the deadline of November 12, 2026, at 9:00 PM. Further details and submission guidelines can be accessed via the BC Bid portal.

TransLink(South Coast British Columbia Transportation Authority)

POSTED

DEADLINE

Specialty Wheeled/Towed Equipment SupplyThis subcontract opportunity is for the supply of specialty wheeled and towed power equipment and accessories to support prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of specialized machinery, including towed spreaders, aerators, and other wheeled power equipment, all of which must adhere to standard specifications. The project is based in Boston, Massachusetts, and falls under NAICS code 333924. Interested parties should note that the response deadline for this solicitation is December 18, 2026.

Operational Services Division

POSTED

DEADLINE

Agricultural Tractors & Loaders SupplyThis subcontract agreement focuses on the supply of agricultural tractors, skid steer loaders, and related accessories for prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of operational heavy machinery and attachments to various state agencies, with all equipment required to strictly adhere to the RMV Truck Safety Standards. The contract is managed by the Massachusetts Operational Services Division and is centered in Boston. Interested parties must submit their responses by December 18, 2026, to provide the necessary machinery under NAICS code 333924.

Operational Services Division

POSTED

4 days ago

DEADLINE

in about 2 months

AI Contract Overview

Penn West University is seeking bids for a project involving renovations and expansion of the Rutledge Institute located in Morgan Hall South, along with the demolition of Morgan Hall North. The project will be executed by separate prime contractors in accordance with Pennsylvania law, with the overall work managed by a single Lead Prime Contractor who will serve as the General Contractor. The contractor is responsible for providing all labor, materials, supervision, and equipment necessary to complete the construction as outlined in the contract documents, subject to approval by the university and project professionals. A pre-bid conference and site visit are scheduled for June 24, 2025, at the Morgan Hall lecture hall, though attendance is not mandatory. Bids must be submitted electronically via PennBid by July 17, 2025, at 1:00 PM EST, with registration required to access documents and submit proposals. All questions regarding the project should be directed through PennBid’s “Ask a Question” feature, and any updates or addenda will be posted there. The project’s estimated value ranges from five to fifteen million dollars, and it is classified under NAICS code 333924, focusing on industrial process machinery manufacturing.

General Info

Agency

Pennsylvania → Penn West University, Washington County

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Documents

Bid Form PWCA-25003.1 Rutledge Institute Renovations

bid-form

High

General Instructions to Bidders 71-FA-8.2 Dec 2023

instructions-to-bidders

High

IFB 71-FA-8.2 Rutledge Institute Renovations Dec 2023

ifb

High

PWCA-25003.2 Mechanical Construction Bid Form

bid-form

High

PWCA-25003.3 Plumbing & Fire Protection Construction Bid Form

bid-form

High

PWCA-25003.4 Electrical Construction Bid Form

bid-form

High

PWCA-25003 Rutledge Institute Renovations Bid Package

ifb

High

Rutledge Institute Expansion PennWest Cal - Bid Set Full Set Drawings

specifications

High

Rutledge Institute Renovations Addendum 1 PWCA-25003

amendment

High

Rutledge Institute Renovations Addendum No. 2 PWCA-25003

amendment

High

Rutledge Institute Renovations Addendum No. 3

amendment

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 17

Solicitation

Response DeadlineJul 17

Deadline has passed

Submission Closed

07/17/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyPennsylvania → Penn West University, Washington County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Pennsylvania → Penn West University, Washington County

Office AddressN/A

ContactsNo contact information available

Full Description

Penn West University, of the PA State System of Higher Education invites Contractors to download bid documents for this project. Work for the Project shall be accomplished by Separate Prime Contractors according to Pennsylvania statute. The Lead Prime Contractor shall be the General Contractor Specific instructions for coordination and responsibilities of the Lead Prime Contractor are contained in Section 0131000, Project Management and Coordination, and elsewhere throughout the Contract Documents. Work included in each Separate Prime Contract shall include, but not be limited to, the following: The work included under this Project consists of renovations and expansion to the Rutledge Institute located in Morgan Hall South and the demolition of Morgan Hall North Work shall be accomplished by a Single Contractor according to Pennsylvania statute. The Lead Prime Contractor shall be the General Construction Contractor and shall include, but is not necessarily limited to, the furnishing of all labor, superintendence, materials, tools and equipment and performing all work necessary to complete all construction identified on the Contract Documents to the satisfaction of, and subject to approval of the Professional and the University. A Pre-bid conference, with site visit to follow, will be held on June 24, 2025, at 1pm, at the Morgan Hall lecture hall, 903 3rd Street, California PA 15419. The pre-bid meeting is not mandatory but highly recommended. Electronic Bids are due no later than 1:00 PM, EST on July 17, 2025, at 1pm, through PennBid located at https://pennbid.bonfirehub.com. The Bid package is available at no cost via PennBid at https://pennbid.bonfirehub.com/ In order to submit a proposal, interested bidders need to register with PennBid. Registration is a free process that takes only a few minutes. Once registered, bidders may obtain all solicitation documents, receive notification of solicitation updates, and submit and update their confidential bids online. Questions regarding this project shall be submitted via the “Ask a Question” feature in PennBid. Responses to questions which require changes to the Bidding Documents will be posted on PennBid. Bidders who have registered with and downloaded documents for this project from PennBid will be notified by email when a change or addenda has been posted. PennBid provides bid privacy, security and supplier confidentiality, while streamlining the overall procurement process. Although all solicitations are available for public viewing, interested suppliers need to register to be able to submit a bid. Directions: https://www.pwca.edu/about/mapanddirections/index.html