Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CAM, CONTROL

Active
SPE7L3-26-T-124DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued under solicitation SPE7L3-26-T-124D by the Department of Defense through the Land Supplier Operations Vehicle Support office, pertains to the procurement of two critical automation control items from Emerson Automation Solutions with part numbers 07209001128 and SW142-16, totaling six units. The items are designated as critical application components and must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Delivery is required FOB origin within 157 days, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and unit containment, while marking must conform to MIL-STD-129 with no special marking required. The deliverables must be palletized per DLA’s packaging guidelines and shipped to the designated receiving warehouse in Tracy, California. The original required delivery date is May 19, 2027, with a need ship date of January 5, 2027. The contract specifies the unit of issue as each and the total contract value is $36.00, with terms aligned with DoD and DLA procedures for transportation and freight. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026.

General Info

Procure six critical automation controls from Emerson, compliant with DLA standards, no mercury except exemptions, FOB origin, deliver to Tracy CA by May 19, 2027, for $36.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-124D DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Benita Umoren
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAM,CONTROL
1CAM,CONTROL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
LEVEL 1/SUBSAFE REQUIREMENTS DO NOT APPLY
TO THIS ITEM.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
EMERSON AUTOMATION SOLUTIONS FINAL 15187 P/N 07209001128
EMERSON AUTOMATION SOLUTIONS FINAL 15187 P/N SW142-16
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439979 0001 EA 6.000
NSN/MATERIAL:3040014172330
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7L3-26-T-124D
SECTION B
PR: 7017439979 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:05/19/2027
SPE7L3-26-T-124D NSN/Part Number: 3040-01-417-2330 Quantity: 6 EA Purchase Request: 7017439979QTY: 6 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
INBOARD SPRING CAN
Solicitation # SPE7L1-26-T-854N
The contract pertains to the procurement of six INBOARD SPRING CAN units under solicitation SPE7L1-26-T-854N, with a delivery requirement of 406 days after award. The item is identified by NSN 3040-15-162-4175 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific clauses covering cybersecurity compliance at CMMC Level 2, packaging standards, configuration change management, and inspection procedures at the point of origin. The contract mandates that all technical data associated with the item is subject to U.S. export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Additionally, non-accepted supplies must have all government identification removed, and deviations or waivers to requirements must follow formal engineering change proposal procedures. The acquisition is managed by the Department of Defense’s Land Supply Chain, with performance occurring in New Cumberland, Pennsylvania, and inquiries directed to Mary Capezzuti at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
HOUSING, MECHANICAL
Solicitation # SPE7L2-26-Q-0010
This contract specifies the procurement of a mechanical housing with part number 3040-01-500-3558 under solicitation SPE7L2-26-Q-0010, with a firm fixed price and no variance allowed in quantity. The item must be manufactured using a metal casting process and requires specific tooling; sourcing and technical support are available through designated DLA supply chain teams for aviation, land, and maritime applications. Strict compliance is mandated with the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951, and all packaging must adhere to MIL-STD-129 and RP001 packaging guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries, fluorescent lamps, or weapon systems, and portable devices containing mercury must include shockproof construction and secondary containment as per NAVSEA 5100-003D. Government Furnished Property, including non-interference rent-free tooling, may be supplied as needed and must be requested through designated channels. Delivery is due 352 days after award, with inspection and acceptance occurring at the destination, and shipment must comply with DLA transport procedures. The item is to be delivered to DLA Distribution San Joaquin in Tracy, California, and the contract is governed by federal acquisition rules with a sole source procurement under NAICS code 333613.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
DRIVE SHAFT ASSEMBL
Solicitation # SPE7L1-26-T-853U
This contract is for the procurement of two drive shaft assemblies under solicitation SPE7L1-26-T-853U, with a total quantity of 2 units required at a unit price of $2.00, resulting in a total price of $4.00. The item is identified by NSN 2520-01-678-1690 and must be delivered within 184 days from the contract date, with delivery point set at FOB origin. Inspection and acceptance are to occur at the destination facility, and no quantity variance is permitted. The packaging and marking specifications must comply with MIL-STD-2073-1E and MIL-STD-129, using weather-resistant fiberboard die-cuts for cushioning and protection, with no special marking required. Packaging must adhere to DLA’s procurement requirements, including palletization standards and the use of specified materials for immobilization and stacking strength. Ozone-depleting chemicals are strictly prohibited in any component or process, and any substitutes must be submitted for approval unless explicitly authorized by the specification. Hazardous materials procedures must follow IP025 guidelines, and all shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The need ship date is February 1, 2027, with an original required delivery date of October 14, 2026. The contract incorporates technical and quality requirements referenced in the DLA Master List and is subject to the revisions in effect at the time of solicitation issuance. The NAICS code is 333613, and the contracting agency is the Department of Defense through the Land Supply Chain organization with Chantel Josey as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTROL
Solicitation # SPE7L2-26-Q-0008
The contract is for the procurement of three lever remote control units with NSN 3040-15-068-5657 under solicitation SPE7L2-26-Q-0008, issued by the Department of Defense’s Land Supplier Operations Wheeled Vehicles. The item is classified as a critical application component with specific manufacturer designations from FinCantieri Marine Systems North and Isotta Fraschini Motori Spa, both using part number 74904F91. Delivery is required within 119 days after the order date, with shipping and receipt handled at the DLA Distribution San Joaquin facility in Tracy, California. The contract enforces strict compliance with DLA packaging standards, MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and MIL-STD-973 for configuration control, excluding certain subclauses. Packaging must adhere to prescribed methods including dry preservation, JA wrap material, and D4 unit containers with E5 intermediate containers, all labeled with the U pack code and no special marking. The item is subject to prohibition of intentional mercury or mercury-containing compounds in direct contact with the hardware, with exceptions allowed for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Pricing is firm fixed with zero variance allowed in quantity, inspection and acceptance occur at destination, and the contract is governed by the DLA Master List of Technical and Quality Requirements referenced on the DLA website, with the applicable revision determined by the solicitation issue date. Units are issued under the DoD authorized unit of measure AY, and transportation logistics follow DLA procedural notes C19 and C20. The purchase request is 7017227260 with a material need date of January 25, 2027.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
Defense-Grade Component Supply (Breather Part)The contract calls for the supply of nine units of the JCB INC. breather component with part number 333/X2764 and NSN 2520-01-723-6104, specifically designed to meet rigorous military packaging and delivery standards. This is a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance required at NEW CUMBERLAND, PA, 17070-5002. The solicitation is aligned with NAICS code 333613, indicating classification within the Other Engine Equipment Manufacturing sector. All components must fully comply with defense specifications for quality, packaging, and logistics to ensure operational readiness in military environments. Submission responses are due by August 10, 2026, with the solicitation posted on July 30, 2026. The contract does not specify a set-aside program, and there is no designated point of contact listed in the provided data. The opportunity is accessible through the DIBBS platform at the provided link, and contractors must ensure adherence to all military compliance protocols beyond standard commercial delivery expectations. Failure to meet packaging or performance requirements could result in rejection of delivery, making detailed attention to technical specifications critical for proposal submission.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
Cylinder Assembly Manufacturing and SupplyThe contract requires the manufacture and supply of Cylinder Assemblies designated by NSN 3040-01-546-1811 and part number 112841 for a critical application, adhering strictly to Department of Defense technical and quality standards set by DLA. The work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 333613 indicating the focus on other commercial and service industry machinery manufacturing. Performance of the contract is mandated to occur at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring local compliance and logistical alignment. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, allowing interested small businesses a limited window to submit proposals. All deliverables must meet exacting military-grade specifications, and the contract is managed under the Land Supply Chain within the Department of Defense, emphasizing mission-critical reliance on consistent, high-quality output.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
COTS Cylinder Assembly SupplyThe contract requests the supply of four units of a Linear Actuating Cylinder Assembly identified by NSN 3040015455530, a commercial off-the-shelf industrial component used in mechanical systems. This is a subcontract under the NAICS code 333613, which pertains to industrial machinery manufacturing, and is being managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The solicitation was posted on July 30, 2026, with a responsive deadline set for August 10, 2026, and the place of performance is designated as Texarkana, Texas, with a zip code of 75507-5000. The contract does not specify any set-aside provisions or additional sourcing restrictions, and all units must meet the commercial industrial specifications of the component as defined by its NSN. The full solicitation details can be accessed via the provided DIBBS online link.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-138V
This solicitation, SPE7L3-26-T-138V, requires the delivery of three units of item 11610607 for first article testing within 180 calendar days of contract award to Tinker Air Force Base, with the government retaining these units for evaluation or use as a manufacturing standard—not counting toward the final production quantity. The contractor must await written notification from the contracting officer within 180 days of government receipt of the first article to receive approval, conditional approval, or disapproval. Offers must comply with strict domestic content requirements, including the Berry Amendment and Buy American Act, with thresholds as low as $150,000, and any non-domestic materials require full disclosure. Bid submissions must affirm that no covered telecommunications equipment or services from restricted foreign sources are included, per FAR and DFARS clauses. Small business joint ventures must submit specific representations for designated categories. The offeror must also confirm it will not use additive manufacturing for any supplied items unless specifically approved in advance. Vendors must register via the new AMPS system to access the Vendor Shipment Module for future shipping capabilities, and those using VSM WebServices must update their internal schema to maintain functionality. Quantity quotes are encouraged as ranges due to fluctuating demand, but this does not apply to automated IDC processes. Offers submitted after the closing date must be flagged as “No Bid” on DIBBS to maintain visibility. The procurement is for 109 units with a 925-day delivery window, and all offers must be submitted through DIBBS by the stated deadline.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
PAD BRACE
Solicitation # SPE7L2-26-T-0584
The contract pertains to the procurement of a PAD BRACE with NSN 3040-01-470-3625, requiring 17 units to be delivered FOB origin within 257 days, with a mandatory ship date of April 25, 2027. All supplies must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking permitted. Packaging must be palletized according to DLA guidelines, using unit containers D3, intermediate containers DO, and the specified packing code U. The product must adhere to strict environmental and material restrictions: no intentional addition of mercury or mercury-containing compounds, except for approved exceptions like batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents as defined by NAVSEA, with portable items containing mercury requiring shockproof construction and a secondary containment boundary. Class I ozone-depleting chemicals are prohibited in any supplied items, and substitution requires prior approval unless already authorized by specifications. The contract mandates full and open competition and incorporates technical and quality requirements from the DLA Master List, with revision controls tied to the solicitation or award date depending on acquisition type. Delivery is to be made to the specified DLA distribution center in Tracy, CA, with inspection and acceptance also occurring at the destination, and no variance in quantity is permitted.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
BRACKET, EYE, NONROTA
Solicitation # SPE7L4-26-T-5917
The contract awards five non-rotating eye brackets under NSN 3040-01-551-6168 and purchase request 7017697881, with a unit price of $5.00 and a total value of $25.00. Delivery is required within 345 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms, meaning the supplier assumes responsibility for transportation and packaging until the goods are loaded for shipment. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging standards. The item is subject to DLA’s Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses like batteries, sensors, or weapons systems under NAVSEA specifications, with portable devices containing mercury requiring shockproof construction and secondary containment. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the supply chain must ensure removal of any government identification from non-accepted items. The solicitation was issued on July 30, 2026, with responses due by August 10, 2026, under contract number SPE7L4-26-T-5917, with a mandatory delivery date of July 22, 2027, and no quantity variance permitted.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L3-26-U-0663
The contract pertains to the procurement of a spur gear identified by NSN 3020-15-119-9880, with an estimated quantity of four units under a Simplified Indefinite-Delivery Contract issued by the Department of Defense through DLA Land and Maritime. Delivery is required within 120 days from the acceptance delivery order, with FOB Origin terms, meaning title and risk transfer to the government at the supplier’s location. The item is designated as a critical application component, specifically sourced from FinCantieri Marine Systems North, Isotta Fraschini Motori Spa, and Wartsila Italia Spa, each using the same part number 73300F01. The contract enforces stringent packaging and preservation standards aligned with MIL-STD-2073-1E, requiring weather-resistant corrugated fiberboard containers with full overlapping flaps, immobilization of the product, and the use of specific preservation methods including climate-controlled dry storage and preservation material code 89. Marking must comply with MIL-STD-129, incorporating special codes indicating “Arrow Up, Team Lift Required” and “Open for Inspection or Use Only,” along with UDI-compliant barcoding. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the hardware unless part of an exempted functional application such as batteries, lighting, sensors, or weapon systems, and any portable equipment containing mercury must include a secondary containment system per NAVSEA 5100-003D. The contract incorporates FAR clauses including 52.227-1 with alternates, 52.222-50 related to combating human trafficking, and 52.223-3 on hazardous material identification, each subject to deviation 2026-O0038. Compliance with DFARS 252.223-7001 mandates proper hazard labeling under OSHA’s Hazard Communication Standard, aligned with MIL-STD-129. Invoicing must occur via Wide Area WorkFlow, and contractors must submit valid Unique Entity IDs and CAGE codes, particularly if representing as a small business, disadvantaged business, or nonmanufacturer. The solicitation sets a maximum contract value of $350,000, though no firm pricing is established until a delivery order is issued, and the quantity of four units is non-binding. Proposals must be submitted electronically through the D
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
HOUSING, MECHANICAL
Solicitation # SPE7L1-26-T-901M
This contract pertains to the procurement of a Housing, Mechanical Drive item identified by NSN 3040-01-697-6823 and part number 251-5750199-113, with a quantity of three units to be delivered within 262 days from contract award. The item is classified as a restricted source requiring government engineering source approval, and all manufacturing must adhere to the most current revisions of applicable standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specifications. Mercury and mercury-containing compounds are banned except for approved functional applications such as batteries, fluorescent lights, instrumentation, weapon systems, or specified chemical reagents; where used, these must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. Delivery is FOB origin to the designated receiving warehouse in Tracy, CA, with zero tolerance for quantity variance. The item is subject to configuration change management and requires formal engineering change proposal procedures for any deviations. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements. The contract was solicited under SPE7L1-26-T-901M with a response deadline of August 10, 2026, and the required delivery date is April 30, 2027.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-U-0634
This contract, issued by the Defense Logistics Agency under solicitation number SPE7L3-26-U-0634, is a small business set-aside for the procurement of a gasket with National Stock Number 5330007954086, intended for delivery under an indefinite-delivery contract structure with a guaranteed minimum of 27 units and a ceiling value of $350,000. The item is required in a quantity of 181 units, with delivery due 116 days after award, delivered FOB origin, and subject to zero variance in quantity. The gasket must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and the use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bagging specifically designed to protect against ultraviolet degradation for items under Federal Supply Classes 5330 and 5331. Marking and labeling must follow MIL-STD-129, including proper 2D barcode application for automated processing, with no special marking required beyond standard identification. Preservation is controlled through dry, temperature-regulated storage with no additional preservation or cushioning materials applied. Palletization must conform to DLA’s RP001 packaging requirements, and all hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with applicable hazard warning data submitted for approval if not governed by other federal statutes. Inspection and acceptance occur at the destination, with the government retaining authority to reject noncompliant items. Contract administration is governed by FAR and DFARS clauses mandating compliance with small business representations, employment eligibility verification, trafficking in persons prevention, sustainable product requirements, cyber security standards including NIST SP 800-171 and safeguarding covered defense information, and electronic invoicing through WAWF. Payment and accounting information will be finalized upon award, and all proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2026 deadline.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL KIT
Solicitation # SPE7L3-26-Q-1249
The contract is for a Seal Kit identified by NSN 5330-01-178-6210 and part number SPE7L3-26-Q-1249, with a fixed quantity of 124 kits delivered under a firm fixed price arrangement and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at the destination point under FOB origin terms. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and MIL-STD-129 for marking, with no special marking required; preservation and packaging methods must align with DLA’s procurement requirements. The item is designated a critical application and is subject to strict quality standards referenced in the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Mercury and mercury-containing compounds are prohibited except in specific exempted applications such as certain batteries, instruments, or weapon systems, and portable devices containing mercury must have shockproof housing and a secondary containment barrier in accordance with NAVSEA 5100-003D. Asbestos is strictly forbidden. The item does not require Unique Identification under DFARS 252.211-7003. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow specified DLA procedural notes. The contract was solicited July 31, 2026, with responses due by August 7, 2026, under NAICS code 339991, issued by the Department of Defense for Land Supplier Operations Vehicle Support.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-Q-1241
The contract pertains to the supply of 93 gaskets identified by NSN 5330-01-271-4308, with a delivery requirement of 150 days after order placement. All items must be free of asbestos, and any substitutions for listed code or part numbers containing asbestos require formal approval under Clause L30 and Provision 4 conditions. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging requirements, and all non-accepted supplies must have government identification removed prior to delivery. The solicitation number is SPE7L3-26-Q-1241, issued on July 31, 2026, with responses due by August 7, 2026. Performance is designated for Tracy, CA, 95304-5000, under NAICS code 336411, and the contracting activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support. Primary point of contact is Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Aircraft Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-108R
The contract is for the procurement of 243 units of PACKING, PREFORMED with NSN 5330-00-510-8549 under solicitation SPE7L3-26-T-108R, issued by the Department of Defense through Land Supplier Ops Vehicle Spt. The item is classified as a commercial item and must comply with DLA packaging requirements, including technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Delivery is required within 168 days after award, with performance occurring at Tinkering Air Force Base, Oklahoma. The solicitation was posted on July 9, 2026, with responses due by July 20, 2026. For simplified acquisitions, the applicable revision of the DLA Master List is determined by the solicitation issue date or award date. The point of contact for inquiries is Susan Diamond, reachable via email or phone, and all documentation must be submitted through the DIBBS platform.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JAC
Solicitation # SPE7L3-26-T-123T
This contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336330
New
DIBBS
LINING MATERIAL, FRI
Solicitation # SPE7L3-26-T-082V
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-Q-1237
This contract specifies the procurement of a Parts Kit, Seal Replacement with the National Stock Number 5330-01-719-1047 and a quantity of 2 kit units, to be delivered within 230 days after the award date. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging and preservation must adhere to MIL-STD-2073-1E, Appendix D for kits, and the end item must be sealed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the NSN to ultraviolet exposure. Packaging, marking, and shipping must follow MIL-STD-129 and DLA Packaging Requirements, including palletization standards, and include special markings as designated. The item is subject to delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, under direct vendor delivery, foreign military sales, or stock shipment conditions. The contract prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Mercury or mercury-containing compounds are strictly banned from direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The supplier, Defense Maritime Solutions, Inc., with part number H73918-01/OK, must ensure all items are marked per MIL-STD-130N and that preserved materials meet the specified preservation methods. No quantity variance is permitted—delivery must be exactly two kit units. Contract data indicates it was issued under solicitation SPE7L3-26-Q-1237, with a response deadline in August 2026 and a material need date of February 5, 2027. All handling and transportation must comply with DLA procedural notes C19 and C20, and the point of contact for inquiries is Michael O'Connor at the Department of Defense.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L3-26-Q-1243
The contract is for the procurement of 6 units of a rubber strip under solicitation number SPE7L3-26-Q-1243, with a delivery requirement of 150 days after award. The item is classified under Federal Supply Class 5330/5331 and carries the National Stock Number 5330-20-001-9814. All supplies must comply with the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards are identified by R or I numbers and are incorporated by reference. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary as defined by NAVSEA 5100-003D. Additionally, all items must be free of asbestos, with any prior asbestos-containing parts or alternatives subject to approval under Clause L30 and Provision 4 conditions. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with the point of contact being Susan Diamond at the Department of Defense’s Land Supplier Operations Vehicle Support office.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L3-26-Q-1245
The contract is for 127 metal seal rings with NSN 5330-01-015-2382 under solicitation SPE7L3-26-Q-1245, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All items must be free of asbestos, and any alternative materials or substitutions require explicit approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all government identification removed as per RQ011. The item must be marked in accordance with MIL-STD-130N dated 16 November 2012. Delivery is required within 90 days after delivery order, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L3-26-Q-1244
The contract requires the supply of 1,284 units of a packing with retainer item under solicitation SPE7L3-26-Q-1244, with a delivery deadline of 150 days after order placement. All items must comply with stringent packaging standards, including enclosure in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation of Federal Supply Classifications 5330/5331 NSNs and LSNs. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any previously approved asbestos-containing components are no longer acceptable without formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a second layer of containment as specified in NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. The contract incorporates cybersecurity requirements under CMMC Level 2 Self-Assessment and references technical and quality standards from the DLA Master List, with the applicable revision based on the solicitation issue date or award date. Performance is required at Robins AFB, Georgia, and inquiries should be directed to the primary point of contact, Susan Diamond, at DLA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336992
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L3-26-T-124C
The item specified is a CAP, FILLER OPENING, to be manufactured using a metal casting process, requiring specialized tooling for production. A total of 63 units are requested under solicitation SPE7L3-26-T-124C, with delivery due within 157 days from award. The procurement is governed by the Defense Logistics Agency and falls under NAICS code 336992, targeting federal suppliers with performance occurring in New Cumberland, Pennsylvania. Compliance with stringent quality and technical requirements is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation controls such as Configuration Change Management via Engineering Change Proposals and Inspection and Acceptance at Origin. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict supplier qualification. Export control regulations apply to associated technical data, subject to either ITAR or EAR, prohibiting unauthorized transfer to foreign persons or entities, including domestic subsidiaries of U.S. firms. Access to this controlled data is restricted to contractors holding U.S./Canada Joint Certification Program approval, having completed mandatory DOD export control training, and obtained formal authorization from DLA. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed per specified directives. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization. All responses to this solicitation must be submitted by July 31, 2026, with primary point of contact Matthew Curry at the Defense Logistics Agency.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336211
New
DIBBS
KINGPIN, FIFTH WHEEL
Solicitation # SPE7L3-26-T-123Z
This contract pertains to the procurement of KINGPIN, FIFTH WHEEL items under solicitation SPE7L3-26-T-123Z, with a total quantity of six units to be delivered FOB origin within 157 days from the contract award, with no tolerance for variance in quantity. The specification mandates strict adherence to the DLA Master List of Technical and Quality Requirements, superseding any conflicting standards, including ASTM D3951 for packaging, which itself must be followed only in the absence of higher precedence DLA requirements. Packaging and labeling must comply fully with MIL-STD-129, and palletization must meet RP001 guidelines. Inspection and acceptance occur at the point of origin, with sampling required to follow MIL-STD-1916 or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and all samples must result in zero non-conformances unless otherwise contracted. The product is classified as a critical application item and must conform to CID A-A-52479 Revision D dated 10/21/1993 in lieu of MS53037. The use of Class I ozone-depleting chemicals is strictly prohibited, and any proposed substitutes require prior approval. Full and open competition applies under a total small business set-aside, and the NSN 2510-01-109-7054 must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with all transportation governed by DLAD procedural notes C19 and C20. The original required delivery date is March 20, 2027, with a need ship date of January 5, 2027, and each unit is priced at $6.00, totaling $36.00.
Motor Vehicle Body Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details