Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CANISTER ASSEMBLY, SUCT

Active
SPE2DS-26-T-225MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 20 units of the Canister Assembly, Suction, Surgical, identified by NSN 6515-01-622-0172, with a requirement for delivery within 20 days of award. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest rate to the delivery point at JBSA Ft Sam Houston, Texas. Marking must adhere to Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or any amendment. The solicitation number is SPE2DS-26-T-225M, posted on July 12, 2026, with responses due by July 20, 2026, under NAICS code 334511, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF. Bidders must specify the source and part number being supplied, and all supplies must comply with the requirement to remove government identification from non-accepted items used with suction apparatuses.

General Info

Procure 20 suction canisters, deliver in 20 days to Ft Sam Houston, comply with Medical Marking Standard No. 1.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

2220 WHEELRIGHT STREET BLDG 4194-E, JBSA FT SAM HOUSTON, TX, 78234, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-225M Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
CANISTER ASSEMBLY,SUCTION,SURGICAL
CANISTER ASSEMBLY,SUCTION,SURGICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED WITH SUCTION APPARATUS,OROPHARYNGEAL,TRACHEAL
End Item NSN 6515-01-616-3470 .. UNIT OF ISSUE: EACH (EA) .. BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-622-0172 Quantity: 20 EA Purchase Request: 7017451094QTY: 20 Delivery: 20 days ADO

Similar Contracts

NAICS: 334511
New
Federal
G-IV Inertial Reference System UpgradeThe G-IV aircraft at Armstrong Flight Research Center requires an upgrade to its inertial reference system, which currently operates on the unsupported Honeywell LASEREF II unit. The original equipment manufacturer no longer provides support for this system or any alternative iterations except the LASEREF IV, which is the only compatible replacement approved for the G-IV platform. The acquisition includes three LASEREF IV units, the necessary adapter kit to transition from the legacy system, and full installation services to be carried out by an approved avionics shop to ensure compliance and operational integrity. This procurement is forecasted under the NAICS code 334511 and is managed by NASA’s National Aeronautics and Space Administration through the Armstrong Flight Research Center located at Edwards AFB. The action is intended to restore and maintain critical navigation capabilities, as the existing system is no longer serviceable due to discontinued support from the OEM and third parties. Point of contact for inquiries is Franzeska H. Becker, with additional support available through the Small Business Specialist, Curtis M. Paul. The solicitation is posted as a forecast with a projected timeline beginning October 1, 2026.
Armstrong Flight Research Center

POSTED

in 3 months

DEADLINE

N/A
View Details
NAICS: 334511
New
DIBBS
CUSHION, SHOCKThe contract calls for the procurement of one shock cushion identified by NSN 5845-01-111-1964, with a delivery requirement of five days after award, under solicitation SPE4A7-26-T-565P. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The vendor must comply with DLA packaging requirements and ensure all items are physically marked per RQ017, while removing any government identification from non-accepted supplies as mandated by RQ011. A complete data package, including details for both the primary and alternate part, must be submitted since no data is currently available, and source approval documentation is required per RC001. The solicitation was posted on July 12, 2026, with responses due by July 20, 2026, and is classified under NAICS code 334511 for the Department of Defense’s ASC Supplier Oper AE and AF Division, with Jesse Saul listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
RESUSCITATOR, HAND OThe contract is for a pediatric hand-operated resuscitator, specifically an AMBU bag with an oxygen reservoir, packaged in quantities of six per unit. The device is latex-free and includes essential components such as a manometer port, child mask, double swivel elbow, removable accumulator, PEEP valve, and a 40-inch oxygen reservoir tube. It is designed for pediatric use and meets specific medical equipment standards. The item is identified by NSN 6515-01-585-5916, with a single package ordered under purchase request 7017450879, and delivery is required within 20 days of award. The solicitation, issued under number SPE2DS-26-T-225Q on July 12, 2026, with a response deadline of July 20, 2026, falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA specifications, and non-accepted supplies must have all government identification removed. The place of performance is listed as FPO, ZIP 09566-4008, indicating delivery to military postal locations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a dial indicating pressure gauge under solicitation SPE4A5-26-T-284Q with NSN 6685-01-046-6758 and part number SG4NN8KPWCANAG, for a single unit to be delivered FOB destination within 140 days with no variance in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions effective as of the solicitation issue date or award date depending on acquisition size. The item is classified as a critical application item requiring compliance with MIL-G-18997E and DI-DRPR-80651, and all markings must follow MIL-STD-129 with the special marking code 05 indicating a delicate instrument. Packaging adheres to MIL-STD-2073-1E with packaging code U, using E5 unit containers and no cushioning, and palletization complies with DLA packaging requirements. Inspection and acceptance occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based plan; any unspecified attributes are treated as major with an acceptance level of IV or AQL 1.0. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for specific devices like batteries or sensors, and any portable instruments containing mercury must be shock-proof with secondary containment per NAVSEA 5100-003D. The unit of issue is each, priced at $1.00, with total value $1.00, and all measurements and test equipment used must meet RT001 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
DIAPHRAGM ASSY, INDIThe contract pertains to the procurement of a Diaphragm Assembly, INDICATOR, identified by NSN 6610-00-511-3320 and part number 2125 from AEROSONIC LLC, with a total quantity of twelve units to be delivered FOB origin within 169 days of contract award. The item is classified as a critical application component and must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede all other specifications including ASTM D3951. Packaging must meet DLA requirements per RP001 and MIL-STD-129, with labeling and palletization strictly adhering to these directives. The unit of issue is each, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier is required to comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to the handling of covered defense information as outlined in RD002. Government identification must not be removed from non-accepted supplies, per RQ011. All packaging and labeling must meet MIL-STD-129 standards and the unit pack quantity is specified as 001. Delivery is to be made to DLA Distribution Depot Hill at Hill Air Force Base, Utah, with a required ship date of January 6, 2027, and original delivery due by February 26, 2027. The contract, identified by solicitation number SPE4A7-26-T-564R, was issued under NAICS code 334511 by the Department of Defense, with Dedrick Benson listed as the primary point of contact. The item falls under a simplified acquisition with terms controlled by the revision of the DLA Master List effective on the solicitation issue date. Transportation logistics follow DLAD Proc Notes C19 and C20, and the purchase request number is 7017454452.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details