CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SE

The contract pertains to the procurement of 4,286 units of a protective dust and moisture seal cap or plug, identified by NSN 5340008487259 and part number NAS816-131, manufactured in accordance with the non-government standard NAS816 Revision 3 dated October 31, 2012. All items must comply with the current revision of the defining standard, and hardware produced under prior revisions that were current at the time of manufacture remains acceptable. The product must be marked in accordance with MIL-STD-130N for identification of U.S. military property and packaged according to either FED-STD-313 for hazardous materials under TQ requirement IP025 or ASTM D3951 for non-hazardous materials, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Packaging and labeling must fully adhere to MIL-STD-129, including mandatory bar-code identification, and palletization must meet DLA packaging requirements. Delivery is FOB origin with a 158-day delivery window to the destination in Jacksonville, Florida, where inspection and acceptance will occur. The contract enforces a zero non-conformance acceptance standard for sampling under MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with unspecified attributes treated as major and assigned an AQL of 1.0. The use of ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. All items must comply with federal regulations including prohibitions on hexavalent chromium, toxic materials, and covered defense telecommunications equipment, and must meet cybersecurity safeguarding standards under NIST SP 800-171 and DFARS 252.204-7012. The contract operates under a firm-fixed-price structure with no pricing data provided in the solicitation, and award is likely based on lowest price technically acceptable. Payment must be processed via WAWF, and offerors must provide valid UEI and CAGE codes, along with accurate socioeconomic status representations, including any participation in small business programs. The procurement is competitively open, with no set-aside specified, and adherence to all DLA technical, quality, and packaging directives is mandatory.