Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CAP, PNEUMATIC VALVE

Active
SPE7L7-26-T-4251Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the procurement of seven CAP, PNEUMATIC VALVE units with NSN 2640-01-471-2872 under solicitation SPE7L7-26-T-4251, requiring delivery within 168 days FOB origin with no tolerance for quantity variance. The valves must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951, and mandate adherence to MIL-STD-129 for packaging and labeling. Packaging must follow RP001 directives, with hazardous materials requiring compliance with TQ requirement IP025 per FED-STD-313, while non-hazardous items must be commercially packaged in alignment with applicable DLA and military standards. Sampling inspection must conform to MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance criteria unless otherwise specified, and critical attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification on the valve must reflect either Lockheed Martin Aeronautical Systems P/N 0059-0018 or Safran Electronics & Defense P/N 0059-0018. Inspection and acceptance occur at destination, and delivery must be shipped to DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of January 5, 2027. The unit of issue is each, priced at $7.00, for a total of $49.00, and all packaging must be palletized per DLA requirements, with transportation procedures governed by DLAD Proc Notes C19 and C20.

General Info

Procure seven pneumatic valve units under federal solicitation with July 20, 2026, submission deadline.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4251.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
MARIA BLANEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP,PNEUMATIC VALVE
CAP,PNEUMATIC VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
LOCKHEED MARTIN AERONAUTICAL SYSTEMS 74703 P/N 0059-0018
SAFRAN ELECTRONICS & DEFENSE, AVIONICS 86831 P/N 0059-0018
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438036 0001 EA 7.000
NSN/MATERIAL:2640014712872
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
SPE7L7-26-T-4251
SECTION B
PR: 7017438036 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:01/05/2027 Original Required Delivery Date:01/05/2027
SPE7L7-26-T-4251 NSN/Part Number: 2640-01-471-2872 Quantity: 7 EA Purchase Request: 7017438036QTY: 7 Delivery: 168 days ADO

Similar Contracts

NAICS: 314994
New
SLED
Manufacture of Industrial Full-Body Aerial Lift HarnessesNashville Electric Service is seeking a subcontractor to manufacture twelve large-sized X-style full-body aerial lift harnesses designed for industrial use, constructed with reinforced nylon webbing, quick-connect buckles, leather insulators, and durable identification tags, all meeting ASTM F887 safety standards. The contract requires precise adherence to technical specifications to ensure worker safety during elevated operations, with all units needing consistent quality and reliability. Proposals must be submitted by July 15, 2026, at 7:00 PM Eastern Time, and the work is to be performed in support of operations based in Nashville. The solicitation is open under NAICS code 314994, targeting manufacturers specializing in textile fabric and other textile product manufacturing, and interested parties can access details through the provided vendor portal link.
Nashville Electric Service

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUSThe contract pertains to the procurement of fibrous rope with specific technical and packaging requirements, identified by NSN 4020-01-572-8265 and solicitation number SPE8EE-26-Q-0370. The rope is to be 400 feet in length with a diameter of 2.25 inches, with eye slices at each end measuring six feet and equipped with chafe gear, deviating from the standard A-A-59811. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the rope or related hardware, except for functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or specified chemical reagents as authorized by NAVSEA, with portable items containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow DLA’s RP001 packaging guidelines, and the unit of issue is specified as AY with a firm quantity of five units and zero tolerance for variance. Delivery is required 150 days after award, with free on board terms at origin and inspection and acceptance occurring at the destination. The supplies must be shipped to DLA Distribution Jacksonville, building 175, Swan Road, Jacksonville, FL 32212-0103, with freight shipping instructions referencing DLAD PROC NOTE C20. The contract is governed by federal procurement rules, with Covered Defense Information potentially applicable, and all material must be manufactured in accordance with DLA’s authorized unit of issue standards referenced via the provided link. The procurement is for the Department of Defense, with Robert Guerra designated as the primary point of contact, and the material need date is set for January 11, 2027. The solicitation closed on July 16, 2026, and was posted on July 9, 2026, with NAICS code 314994 defining the industrial classification for the items supplied.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUSThe contract specifies the procurement of fibrous rope meeting MIL-DTL-24050F standards, with a nominal continuous length of 600 feet per reel, wound in 200-yard lengths, and a circumference of 3-3/4 inches. The rope is to be made of nylon and delivered at a net weight of 239 pounds per reel, with pricing based on net weight per pound. Units must be undamaged, uncut, and not shortened except for test specimens, which must remain fully compliant with specifications. Packaging must adhere to MIL-STD-2073-1E, marked per MIL-STD-129, with no special marking required, and shipments must be sent by traceable means—parcel post is prohibited. Delivery is FOB origin with a 20-day deadline, targeted for Explosive Ordnance Disposal Group 1 in San Diego, California. Only manufacturers or distributors listed on the DLA Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) for FSC 4020 are eligible for award. Any bid not based on a QSL-approved supplier is considered an exception and must be explicitly indicated. Compliance with the QSL program waives certain inspection requirements such as COQC, PVT, and QAP-EQ003, but failure to comply with QSL mandates may result in criminal penalties. The rope must be free of intentional mercury or mercury-containing compounds unless specifically exempted—such as in batteries, lights, or instrument controls—where additional containment requirements apply. Sampling for quality conformance follows MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance strategy, and all unspecified attributes are treated as major. The solicitation number is SPE8EE-26-T-2094, with a response deadline in July 2026 and an original required delivery date of July 8, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 314994
New
Federal
40--ROPE,FIBROUSThe solicitation seeks quotes for 5 units of NSN 4020015728265, ROPE, FIBROUS, to be delivered to DLA Distribution Jacksonville within 150 days after order placement. The procurement is conducted under solicitation number SPE8EE26Q0370 with a response deadline of July 16, 2026, and is structured as a total small business set-aside under FAR 19.5, targeting vendors certified as small businesses. The North American Industry Classification System code is 314994, and the contracting office is the Department of Defense through DLA Troop Support, located in Philadelphia, Pennsylvania. All responsible sources may submit electronic quotes, and hard copies of the solicitation are not available; interested parties must access the full document online via the SAM.gov link or through DIBBS using the solicitation number. Digitized technical documents including military specifications and drawings can be retrieved electronically. Questions should be directed via email to the designated buyer, with additional guidance provided through the official DIBBS portal.
DLA Troop Support

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUSThe contract is for the procurement of fibrous rope with NSN 4020-00-560-7732, requesting a quantity of 53 units under Purchase Request 7017422244. It was issued as a solicitation by the Defense Logistics Agency under the Department of Defense, with the solicitation number SPE8E9-26-T-3111. The solicitation was posted on July 8, 2026, and responses are due by July 20, 2026. The contract is designated as federal in nature with no specific set-aside classification. The place of performance and office address details are not specified, but the contracting entity is based in the United States. All communications and submissions must be handled through the official DIBBS portal linked in the contract data.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

4 days ago

DEADLINE

in 8 days
View Details