Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CAP, PROTECTIVE, DUST AN

Active
SPE7L1-27-T-2419Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-2419, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of nine protective dust and moisture seal caps under NSN 5340-01-182-5274. The items are to be delivered to the DLA Distribution Disp New Cumberland Facility in Pennsylvania by April 8, 2027. This is not a small business set-aside, and the acquisition falls under NAICS code 332313. Shipping is established as FOB Origin under the First Destination Transportation program. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130N for property identification and MIL-STD-129 for shipment marking. Packaging must comply with ASTM D3951 and RP001 DLA packaging requirements, with specific hazard labeling required per 29 CFR 1910.1200 if applicable. Inspection and acceptance will occur at the destination per FAR 52.246-1, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity standards.

General Info

DLA procurement of nine protective seal caps for delivery by April 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332313 - Plate Work Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE7L1-27-T-2419

PDF, High priority: read this first18 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP,PROTECTIVE,DUST AND MOISTURE SEAL
CAP,PROTECTIVE,DUST AND MOISTURE SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR NSN/Part Number: 5340-01-182-5274 Quantity: 9 EA Purchase Request: 7018862708QTY: 9 Delivery: 153 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332313
New
SLED
Fabrication and Supply of Secondary Clarifier Slide GatesThis subcontract involves the fabrication and supply of two new secondary clarifier slide gates for prime contractors working on Town of Middleborough WPCF projects. The selected provider must manufacture the gates according to Wright-Pierce project specifications, utilizing corrosion-resistant materials specifically designed to withstand influent wastewater environments. The scope of work includes both the fabrication and the final delivery of the two gates to the Middleborough WPCF site located on Nickerson Avenue. This procurement is managed under the Massachusetts Select Board with a response deadline of November 19, 2026.
SB - Select Board

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 332313
New
Federal
Closure Protective Covers (CPCs)
Solicitation # N6660426Q0288
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting quotes for the purchase of Closure Protective Covers (CPCs) on a Firm Fixed Price basis under solicitation N66604-26-Q-0288. The procurement has a maximum funding limit of $197,000.00 and is open for full and open competition under NAICS code 332313 for Plate Work Manufacturing. The scope of work includes the production of a First Article and subsequent production units manufactured in accordance with Government Drawings, specifically the JCM-14865 REV M drawing package. Delivery is required FOB Destination to Newport, Rhode Island. Award will be made using the Lowest Price Technically Acceptable (LPTA) basis, where the government will select the vendor proposing the greatest quantity of covers within the funding ceiling, using the lowest total price as a tie-breaker. To be deemed technically acceptable, offerors must provide completed pricing tables, maintain an active CMMC Level 2 (Self) assessment and NIST SP 800-171 score in the Supplier Performance Risk System (SPRS), and possess a valid Joint Certification Program (JCP) certification to access export-controlled drawings. Additionally, contractors must provide objective quality evidence of welding procedure and welder performance qualifications approved by a NAVSEA-authorized representative. Key deliverables include the hardware and a Certificate of Compliance documenting all material validations and test results.
Nuwc Division Newport

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 332313
New
SLED
100-8 RF-A Plate
Solicitation # 2140128
The MTA - NYC Transit (NYCT) has issued an Invitation for Bid (IFB), solicitation number 2140128, for the procurement of 100-8 RF-A Plates. This procurement falls under the category of Transportation, Bus, Rail, Marine and Aviation Commodities and is intended for a contract term of 12 months with state-wide performance. The solicitation was posted on October 22, 2026, and requires responses to be submitted by November 13, 2026, at 11:00 AM. Interested bidders must be registered through the MTA Vendor Portal to obtain a required bidder/supplier number, as document requests cannot be processed without this identification. The primary point of contact for this action is Parmanand Suknannan, Solicitation Management Manager. Historical data indicates that Menard Industries, LLC has been awarded an identical or substantially similar contract within the past five years, and these goods have been purchased from out-of-state or foreign vendors within the last three years.
MTA - NYC Transit (NYCT)

POSTED

4 days ago

DEADLINE

in 18 days
View Details
NAICS: 332313
New
Federal
EMI CHAMBER
Solicitation # N0017827QC601
Solicitation N0017827QC601 is a Request for Quotation issued by the Naval Surface Warfare Center Dahlgren Division for the design and installation of a high-performance Electromagnetic Interference (EMI) Shielded Chamber and Control Room in Dahlgren, Virginia. The required enclosure must have internal dimensions of 36 by 20 by 13 feet, a floor capacity of 8,000 pounds, and provide 100 dB shielding from 2 MHz to 40 GHz. Technical specifications include an electronically controlled personnel door, a bi-parting equipment door with a ramp, and MIL-STD-461 compliant filtered power for 120VAC, 208VAC, and 480VAC. The procurement also includes an option for Z-fold tuners equipped with motors and controllers. Award will be made on a Lowest Price Technically Acceptable basis under FAR Part 12. Quotes are only accepted from Original Equipment Manufacturers or authorized resellers providing a Letter of Authorization, and all firms must be registered in the System for Award Management. The contract is firm-fixed-price and requires adherence to OSHA regulations and OEM specifications during installation. Deliveries are FOB Destination, and all invoicing and receiving reports must be processed electronically via Wide Area Workflow. Offers are due by October 30, 2026.
Nswc Dahlgren

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 332313
New
DIBBS
LAGOON ASSEMBLY, RET
Solicitation # SPE8ED-27-T-0132
Solicitation SPE8ED-27-T-0132 is a federal procurement issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Containers, for the supply of one Lagoon Assembly, Retention, Collapsible Tank. The item is identified by NSN 5430015191164 and part number CPOOL 8FTX9FTX6IN from Complete Environmental Products Inc. The contract requires delivery within five days of award, with an original required delivery date of June 24, 2026. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance located in Jacksonville, Florida. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, specifically RA001 and RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is categorized under NAICS code 332313 and incorporates various FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, safeguarding covered defense information, and compliance with the Buy American Act and Berry Amendment. Quotations were due by October 30, 2026, via the DIBBS portal.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332313
New
DIBBS
LAGOON ASSEMBLY, RET
Solicitation # SPE8ED-27-T-0133
Solicitation SPE8ED-27-T-0133 is a federal procurement issued by DLA Troop Support, Construction and Equipment Containers, for the supply of one collapsible tank lagoon assembly for retention, identified by NSN 5430-01-519-1171. The requirement is managed under NAICS code 332313 and includes a required delivery date of June 24, 2026, with a delivery window of five days after the award. The contract specifies FOB Origin for offers, while the final delivery and acceptance points are set at the destination in Jacksonville, Florida. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-129 and RP001 DLA Packaging Requirements, with DLA Master List technical requirements taking precedence over ASTM D3951. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material labeling per 29 CFR 1910.1200. The procurement incorporates a HUBZone price evaluation preference and requires quotes to be submitted through the DIBBS portal.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332313
SLED
Cable Barrier Hardware SupplyThis subcontract agreement focuses on the supply of cable barrier hardware for prime contractors operating on Texas Department of Transportation highway projects. The scope of work involves providing high-tensile cables, barrier posts, and anchoring hardware, all of which must strictly adhere to TxDOT material specifications. The supplier is responsible for the delivery of these approved components directly to the project site or the prime contractor. The opportunity is categorized under NAICS code 332313 and was posted on October 16, 2026, with a response deadline of November 10, 2026. This contract ensures that all necessary cabling and hardware are delivered to support the infrastructure requirements of the state of Texas.
Texas Department of Transportation

POSTED

9 days ago

DEADLINE

in 16 days
View Details
NAICS: 332313
International
Water Control Infrastructure SupplierThe Water Control Infrastructure Supplier subcontract involves providing specialized water flow control hardware for prime contractors working on Broads (2006) Internal Drainage Board projects. The scope of work includes the supply and site delivery of stop log systems, non-return gate valves, non-return flap valves, penstocks, and flow meters. To be eligible for this contract, suppliers must maintain ISO9001 certification. The solicitation was posted on October 16, 2026, with a response deadline set for January 19, 2027. This opportunity falls under NAICS code 332313 and focuses on the delivery of critical water control valves and metering equipment.
Broads (2006) Internal Drainage Board

POSTED

9 days ago

DEADLINE

in 3 months
View Details
NAICS: 332313
SLED
Mueller Water Valve & Corporation Stop SupplierThis subcontract agreement establishes a supplier for specialized water main valves and service connection components to support prime contractors working on Town of Needham Department of Public Works projects. The scope of work specifically requires the provision and delivery of authentic Mueller brand products, including H-15013N valves in sizes ranging from 3/4 inch to 2 inches, as well as Mueller Curb Stops models H-15209, H-10283, and B-25209. The contract is managed by the Massachusetts Department of Public Works for performance in Needham, Massachusetts. Interested parties must submit their responses by the deadline of November 5, 2026. The procurement falls under NAICS code 332313, ensuring that all delivered components strictly adhere to the specified Mueller Corporation part numbers.
NEE08 - Department of Public Works

POSTED

10 days ago

DEADLINE

in 11 days
View Details
NAICS: 332313
SLED
Fabrication of Aluminum Box Culvert and Structural Plate HeadwallsThis subcontract involves the fabrication of a custom aluminum box culvert and matching headwalls for North Carolina Department of Transportation bridge maintenance projects. The scope of work requires the production of 40.5 linear feet of #17-L2 culvert and headwalls utilizing .150 and .200 inch aluminum structural plate. Technical requirements include full welding on a 19-degree skew angle and precise alphanumeric match-marking to ensure proper assembly. The selected subcontractor must be an NCDOT approved Producer or Supplier and ensure all fabrications meet AASHTO LRFD HL-93 loading standards. The contract stipulates that all completed components are to be delivered FOB Destination. Interested parties must respond by October 29, 2026.
Department of Transportation

POSTED

11 days ago

DEADLINE

in 4 days
View Details
NAICS: 332313
PLATE,COVER ASSY — 4320011953116 — N0010426QFG68
Solicitation # N0010426QFG68
Solicitation N00104-26-Q-FG68, issued by NAVSUP Weapon Systems Support, seeks a fixed-price contract for the procurement of 16 Cover Plate Assemblies (NSN 4320-01-195-3116). Because these components are used in crucial shipboard systems, they are designated as Special Emphasis Level I material. This classification mandates strict quality control procedures, as any defect could result in catastrophic system failure, loss of the ship, or loss of life. The contractor must maintain a quality system compliant with ISO-9001 and ISO-10012, and the material must be hot forged from Alloy C71500 per MIL-C-24679. The contract requires rigorous testing and certification, including first article testing and non-destructive evaluations such as ultrasonic and dye penetrant inspections on forgings and final machining. All welding and brazing must adhere to specific Navy standards, with required submission of qualification data and certificates of compliance for filler metals. Government Quality Assurance is performed at the source, and all certification data must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be based on the most advantageous offer, with past performance weighted as more important than price.
Navsup Weapon Systems Support Mech

POSTED

11 days ago

DEADLINE

in 5 days
View Details
NAICS: 332313
SLED
Traffic Sign Post SupplierThis subcontract agreement establishes a partnership with a supplier to provide heavy-duty commercial or industrial grade metal sign posts for the Hawaii County Department of Public Works. The supplier is responsible for delivering 1.75 inch square by 9 foot structural posts to Hilo, which will be used by prime contractors for the mounting of traffic signs. Managed by the Public Works Traffic Division, the contract falls under NAICS code 332313. Interested parties must submit their responses by the deadline of October 31, 2026, to be considered for the provision of these essential infrastructure materials.
Public Works Traffic Division

POSTED

11 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332813
New
DIBBS
Chemical Agent Resistant Coating (CARC) ApplicationThis subcontract involves the application of specialized Chemical Agent Resistant Coatings (CARC) for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must utilize CARC-certified spray booths to apply coatings in strict accordance with DCSC drawing 16236 CS-2300-0001 and military specifications. A critical requirement of the project is total compliance with environmental regulations, specifically the prohibition of Class I ozone-depleting chemicals. The scope of work culminates in the delivery of one finished mounting plate accompanied by all necessary compliance documentation. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement categorized under NAICS code 332813.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Fabrication of Mounting Plate (NSN 5340-01-660-9996)This subcontract involves the precision machining and fabrication of a mounting plate, identified by NSN 5340-01-660-9996, for the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for performing machining and forming in strict accordance with Army drawings and quality assurance plans, utilizing precision CNC equipment. The scope specifically excludes additive manufacturing and requires that all materials used are compliant with the Buy American Act and the Berry Amendment. To ensure security and quality, the contractor must hold JCP certification to access ITAR and EAR technical data. The final deliverable consists of one unfinished mounting plate accompanied by a Certificate of Quality Compliance. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 5, 2026.
Machine Shops

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supply of Protective Dust and Moisture Seal Cap Sets
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
Supply of Critical Application Gaskets (NSN 5330012807573)This subcontract involves the supply of 12 specialized gaskets for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The required components must strictly adhere to Fairbanks Morse, LLC P/N T215540 and NSN 5330012807573 specifications, as they are designated as Critical Application Items. The contractor is responsible for ensuring all units meet rigorous quality standards, including identification and marking according to MIL-STD-130N and packaging per MIL-STD-2073-1E. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 5, 2026.
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Cylinder Assembly, Actuator (NSN 3040014375885)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
Supply of Control Dials (NSN 5355016866662)
Semiconductor and Related Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333318
New
DIBBS
Supply of Intake Air Cleaner (NSN 2940-01-570-2736)
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Bumper Assembly (NSN 5340-01-532-6122)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
Supply of Proprietary Component (CAGE 3G2C5 / PN GMS7063K)
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332322
New
DIBBS
Supplier of Access Covers (NSN 2590016947330)
Sheet Metal Work Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Supply of Specialized O-Rings (NSN 5331016925179)
All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supplier of Protective Plug, DUS (NSN 5340014221746)
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS